SDL-PS85R01Ultra-Wideband Wallscanner

PS 85 English PS 85 Original operating instructions English 1 Original operating instructions 1 Information about the operating instructions 1.1 About these operating instructions • Before use, read through and familiarize yourself with this document and the detailed operating instructions. This is a prerequisite for safe, trouble-free handling and use of the product. To access the detailed operating instructions and obtain more informa- tion on operation, technology, environment and recycling, follow this link:qr.hilti.com/manual/?id=2327817 • Observe the safety instructions and warnings in this documentation, in the detailed operating instructions and on the product. • Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons. 1.2 Declaration of conformity Hiltihereby declares that the radio equipment type PS 85 is compliant with Directive 2014/53/EU. The complete text of the EU declaration of conformity has been posted on the Internet here:qr.hilti.com/manual/?id=2327817 2 Safety 2.1 General safety instructions, measuring tools WARNING! Read all safety precautions and other instructions. Measuring tools can present hazards if handled incorrectly. Failure to observe the safety instructions and other instructions can result in damage to the measuring tool and/or serious injury. Keep all safety precautions and instructions for future reference. Work area safety ▶Keep your workplace clean and well lit.Cluttered or poorly lit workplaces invite accidents. ▶Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. ▶Keep children and other persons clear when the product is in use. ▶Use the product only within its specified limits. ▶Comply with your national accident prevention regulations. Electrical safety ▶Do not expose the product to rain or moisture.Penetrating moisture can cause short circuits, electrical shock, burns or explosions. ▶Wipe the product dry before stowing it in the transport container. 2English Personal safety ▶Stay alert, watch what you are doing and use common sense when operating a measuring tool. Do not use a measuring tool while you are tired or under the influence of drugs, alcohol or medication.A moment of inattention while operating the measuring tool can result in serious personal injury. ▶Avoid unusual body positions. Keep proper footing and balance at all times. ▶Wear personal protective equipment.Wearing personal protective equipment reduces the risk of injury. ▶Do not render safety devices ineffective and do not remove infor- mation and warning notices. ▶Avoid accidental starting. Make sure that the measuring tool is switched off before connecting it to the battery and before picking it up or carrying it. ▶Use the product and accessories in accordance with these instruc- tions and in the way specified for this special type of tool. Take the working conditions and the work to be performed into account.Use of products for applications different from those intended could result in hazardous situations. ▶Do not lull yourself into a false sense of security and do not flout the safety rules for measuring tools, even if you are familiar with the measuring tool after using it many times.Carelessness can result in serious injury within a fraction of a second. ▶Do not use the measuring tool in the vicinity of medical devices. Using and handling the measuring tool ▶Use the product and accessories only when they are in perfect working order. ▶Store measuring tools out of reach of children when not in use. Do not allow persons who are not familiar with the product or these instructions to operate it.Measuring tools are dangerous in the hands of inexperienced persons. ▶Measuring tools need care and attention. Check that moving parts operate satisfactorily and do not jam, and make sure that no parts are broken or damaged in such a way that the measuring tool might no longer function correctly. Have damaged parts repaired before using the measuring tool.Many accidents are caused by poorly maintained measuring tools. ▶Do not under any circumstances modify or tamper with the product. Changes or modifications not expressly approved byHiltimay restrict the user’s authorization to operate the product. ▶Check the accuracy of the measuring tool before using it for important measurements, and if it has been dropped or subjected to other mechanical stresses. English 3 ▶Due to the measuring principle employed, the results of measure- ments can be negatively affected by certain ambient conditions. These include, for example, the proximity of devices that produce strong magnetic or electro-magnetic fields, vibrations and temperature changes. ▶ Rapidly changing measuring conditions can falsify the results. ▶When the product is brought into a warm environment from very cold conditions, or vice-versa, allow it to become acclimatized before use.Big differences in temperature can lead to incorrect operation and incorrect results. ▶When adapters or accessories are used, make sure they are mounted securely. ▶The measuring tool is designed for the tough conditions of jobsite use, but as with other optical and electrical products (e.g. binoculars, spectacles, cameras) it must be handled with care. ▶The specified operating and storage temperatures must be ob- served. 2.2 Additional safety instructions Personal safety ▶Keep the measuring tool well away from all implants. ▶Comply with the national accident prevention regulations. ▶Do not use the measuring tool to examine humans or animals. ▶Operation of the device in the proximity of expectant mothers or persons with a cardiac pacemaker is not permissible. Electrical safety ▶Remove the battery prior to storage. Using and handling the measuring tool ▶Prior to use, always check the measuring tool's presettings and the settings you have made yourself. ▶After switching on and while using the product, a…

Text truncated - open the document above for the full version.

GH  $QJDEHQ]XU'RNXPHQWDWLRQ  =XGLHVHU%HGLHQXQJVDQOHLWXQJ ˶/HVHQ6LHYRU,QEHWULHEQDKPHGLHVHV'RNXPHQW XQGGLHDXVIKUOLFKH%HGLHQXQJVDQOHLWXQJGXUFK 'LHVLVW9RUDXVVHW]XQJIUVLFKHUHV$UEHLWHQXQG VW|UXQJVIUHLH +DQGKDEXQJ 'LH DXVIKUOLFKH %H GLHXQJVDQOHLWXQJVRZLHZHLWHUIKUHQGH,QIRUPDWLR QHQ]X%HGLHQXQJ7HFKQLN8PZHOWXQG5HF\FOLQJ ÀQGHQ6LHXQWHUIROJHQGHP/LQNTU+LOWLFRPPDQX DO"LG ˶%HDFKWHQ 6LH GLH 6LFKHUKHLWV XQG :DUQKLQZHLVH LQ GLHVHU 'RNXPHQWDWLRQ GHU DXVIKUOLFKHQ %HGLHQXQJVDQOHLWXQJ XQG DXI GHP 3URGXNW˶%HZDKUHQ6LHGLH%HGLHQXQJVDQOHLWXQJ LPPHUDP3URGXNWDXIXQGJHEHQ6LHHVQXUPLW GLHVHU$QOHLWXQJDQDQGHUH3HUVRQHQZHLWHU .RQIRUPLWlWVHUNOlUXQJ +LHUPLWHUNOlUW+LOWLGDVVGHU)XQNDQODJHQW\S36 GHU5LFKWOLQLH(8HQWVSULFKW'HUYROOVWlQGL JH7H[WGHU(8.RQIRUPLWlWVHUNOlUXQJLVWXQWHUGHU IROJHQGHQ,QWHUQHWDGUHVVHYHUIJEDU TU+LOWLFRPPDQXDO"LG   6LFKHUKHLW  $OOJHPHLQH6LFKHUKHLWVKLQZHLVH 0HVVZHUN]HXJH Ӹӹ:$5181*/HVHQ6LHDOOH6LFKHUKHLWVKLQZHLVH XQG $QZHLVXQJHQ 9RQ 0HVVZHUN]HXJHQ N|QQHQ *HIDKUHQDXVJHKHQZHQQ6LHXQVDFKJHPl‰EH KDQGHOWZHUGHQ9HUVlXPQLVVHEHLGHU(LQKDOWXQJ GHU6LFKHUKHLWVKLQZHLVHXQG$QZHLVXQJHQN|QQHQ 6FKlGHQ DP 0HVVZHUN]HXJ XQGRGHU VFKZHUH 9HUOHW]XQJHQ YHUXUVDFKHQ %HZDKUHQ 6LH DOOH 6LFKHUKHLWVKLQZHLVHXQG$QZHLVXQJHQIUGLH=X NXQIWDXI $UEHLWVSODW]VLFKHUKHLW ˶+DOWHQ 6LH ,KUHQ $UEHLWVEHUHLFK VDXEHU XQG JXW EHOHXFKWHW8QRUGQXQJRGHUXQEHOHXFKWHWH$UEHLWV EHUHLFKHN|QQHQ]X8QIlOOHQIKUHQ˶$UEHLWHQ6LH PLWGHP3URGXNWQLFKWLQH[SORVLRQVJHIlKUGHWHU8P JHEXQJLQGHUVLFKEUHQQEDUH)OVVLJNHLWHQ*DVH RGHU6WlXEHEHÀQGHQ˶+DOWHQ6LH.LQGHUXQGDQGH UH3HUVRQHQZlKUHQGGHU%HQXW]XQJGHV3URGXNWHV IHUQ ˶9HUZHQGHQ 6LH GDV 3URGXNW QXU LQQHUKDOE GHUGHÀQLHUWHQ(LQVDW]JUHQ]HQ˶%HDFKWHQ6LH,KUH ODQGHVVSH]LÀVFKHQ8QIDOOYHUKWXQJVYRUVFKULIWHQ (OHNWULVFKH6LFKHUKHLW ˶+DOWHQ 6LH GDV 3URGXNW YRQ 5HJHQ RGHU 1lVVH IHUQ(LQGULQJHQGH)HXFKWLJNHLWNDQQ.XU]VFKOV VH6WURPVFKOlJH9HUEUHQQXQJHQRGHU([SORVLR QHQYHUXUVDFKHQ 6LFKHUKHLWYRQ3HUVRQHQ ˶6HLHQ 6LH DXIPHUNVDP DFKWHQ 6LH GDUDXI ZDV 6LHWXQXQGJHKHQ6LHPLW9HUQXQIWDQGLH$UEHLW PLWHLQHP0HVVZHUN]HXJ%HQXW]HQ6LHNHLQ0HVV ZHUN]HXJ ZHQQ 6LH PGH VLQG RGHU XQWHU GHP (LQÁXVV YRQ'URJHQ $ONRKRO RGHU 0HGLNDPHQWHQ VWHKHQ(LQ0RPHQWGHU8QDFKWVDPNHLWEHLP*H EUDXFKGHV0HVVZHUN]HXJVNDQQ]XHUQVWKDIWHQ 9HUOHW]XQJHQIKUHQ˶9HUPHLGHQ6LHHLQHDEQRU PDOH.|USHUKDOWXQJ6RUJHQ6LHIUHLQHQVLFKHUHQ 6WDQGXQGKDOWHQ6LHMHGHU]HLWGDV*OHLFKJHZLFKW ˶7UDJHQ 6LH SHUV|QOLFKH 6FKXW]DXVUVWXQJ'DV 7UDJHQSHUV|QOLFKHU6FKXW]DXVUVWXQJYHUULQJHUW GDV5LVLNRYRQ9HUOHW]XQJHQ˶0DFKHQ6LHNHLQH 6LFKHUKHLWVHLQULFKWXQJHQXQZLUNVDPXQGHQWIHUQHQ 6LHNHLQH+LQZHLVXQG:DUQVFKLOGHU˶9HUPHLGHQ 6LHHLQHXQEHDEVLFKWLJWH,QEHWULHEQDKPH9HUJHZLV VHUQ6LHVLFKGDVVGDV0HVVZHUN]HXJDXVJHVFKDO WHWLVWEHYRU6LHHVDQGHQ$NNXDQVFKOLH‰HQHV DXIQHKPHQRGHUWUDJHQ˶9HUZHQGHQ6LHGDV3UR GXNWXQG=XEHK|UHQWVSUHFKHQGGLHVHQ$QZHLVXQ JHQXQGVRZLHHVIUGLHVHQVSH]LHOOHQ*HUlWHW\S YRUJHVFKULHEHQLVW%HUFNVLFKWLJHQ6LHGDEHLGLH $UEHLWVEHGLQJXQJHQXQGGLHDXV]XIKUHQGH7lWLJ NHLW'HU*HEUDXFKYRQ3URGXNWHQIUDQGHUHDOV GLHYRUJHVHKHQHQ$QZHQGXQJHQNDQQ]XJHIlKU OLFKHQ6LWXDWLRQHQIKUHQ˶:LHJHQ6LHVLFKQLFKW LQIDOVFKHU6LFKHUKHLWXQGVHW]HQ6LHVLFKQLFKWEHU GLH6LFKHUKHLWVUHJHOQIU0HVVZHUN]HXJHKLQZHJ DXFKZHQQ6LHQDFKYLHOIDFKHP*HEUDXFKPLWGHP 0HVVZHUN]HXJ YHUWUDXW VLQG $FKWORVHV +DQGHOQ NDQQ ELQQHQ 6HNXQGHQEUXFKWHLOHQ ]X VFKZHUHQ 9HUOHW]XQJHQ IKUHQ˶'DV 0HVVZHUN]HXJ GDUI QLFKWLQGHU1lKHYRQPHGL]LQLVFKHQ*HUlWHQHLQ JHVHW]WZHUGHQ 9HUZHQGXQJXQG%HKDQGOXQJGHV 0HVVZHUN]HXJV ˶%HQXW]HQ 6LH GDV 3URGXNW XQG =XEHK|U QXU LQ WHFKQLVFKHLQZDQGIUHLHP=XVWDQG˶%HZDKUHQ6LH XQEHQXW]WH0HVVZHUN]HXJHDX‰HUKDOEGHU5HLFK ZHLWH YRQ .LQGHUQ DXI /DVVHQ 6LH 3HUVRQHQ GDV 3URGXNWQLFKWEHQXW]HQGLHPLWGLHVHPQLFKWYHU WUDXWVLQGRGHUGLHVH$QZHLVXQJHQQLFKWJHOHVHQKD EHQ0HVVZHUN]HXJHVLQGJHIlKUOLFKZHQQ6LHYRQ XQHUIDKUHQHQ3HUVRQHQEHQXW]WZHUGHQ ˶3ÁHJHQ 6LH 0HVVZHUN]HXJH VRUJIlOWLJ .RQWUROOLHUHQ 6LH REEHZHJOLFKH7HLOHHLQZDQGIUHLIXQNWLRQLHUHQXQG QLFKWNOHPPHQRE7HLOHJHEURFKHQRGHUVREHVFKl GLJW VLQG GDVV GLH )XQNWLRQ GHV 0HVVZHUN]HXJV EHHLQWUlFKWLJWLVW/DVVHQ6LHEHVFKlGLJWH7HLOHYRU GHP(LQVDW]GHV0HVVZHUN]HXJHVUHSDULHUHQ9LHOH 8QIlOOHKDEHQLKUH8UVDFKHLQVFKOHFKWJHZDUWHWHQ 0HVVZHUN]HXJHQ˶'DV 3URGXNW GDUI LQ NHLQHP )DOO PRGLÀ]LHUW RGHU PDQLSXOLHUW ZHUGHQ bQGH UXQJHQRGHU0RGLÀNDWLRQHQGLHQLFKWDXVGUFNOLFK YRQ+LOWLHUODXEWZXUGHQN|QQHQGDV5HFKWGHV $QZHQGHUVHLQVFKUlQNHQGDV3URGXNWLQ%HWULHE ]X QHKPHQ˶9RU ZLFKWLJHQ 0HVVXQJHQ VRZLH QDFK HLQHP 6WXU] RGHU DQGHUHQ PHFKDQLVFKHQ (LQZLUNXQJHQ PVVHQ 6LH GLH *HQDXLJNHLW GHV 0HVVZHUN]HXJHV EHUSUIHQ ˶'LH 0HVVHUJHE QLVVHN|QQHQSULQ]LSEHGLQJWGXUFKEHVWLPPWH8P JHEXQJVEHGLQJXQJHQEHHLQWUlFKWLJWZHUGHQ'D]X JHK|UHQ]%GLH1lKHYRQ*HUlWHQGLHVWDUNH PDJQHWLVFKHRGHUHOHNWURPDJQHWLVFKH)HOGHUHU ]HXJHQ9LEUDWLRQHQXQG7HPSHUDWXUlQGHUXQJHQ ˶6LFKVFKQHOOlQGHUQGH0HVVEHGLQJXQJHQN|QQHQ GLH0HVVHUJHEQLVVHYHUIlOVFKHQ˶:HQQGDV3UR GXNWDXVJUR‰HU.lOWHLQHLQHZDUPH8PJHEXQJJH EUDFKWZLUGRGHUXPJHNHKUWODVVHQ6LHGDV3URGXNW YRUGHP*HEUDXFKDNNOLPDWLVLHUHQ*UR‰H:lUPH XQWHUVFKLHGHN|QQHQ]X)HKORSHUDWLRQHQXQGIDO VFKHQ0HVVHUJHEQLVVHQIKUHQ˶6WHOOHQ6LHEHL GHU9HUZHQGXQJPLW$GDSWHUQXQG=XEHK|UVLFKHU GDVVGDV=XEHK|UVLFKHUEHIHVWLJWLVW˶2EZRKOGDV 0HVVZHUN]HXJ IU GHQ KDUWHQ %DXVWHOOHQHLQVDW] NRQ]LSLHUWLVWVROOWHQ6LHHVZLHDQGHUHRSWLVFKH XQGHOHNWULVFKH3URGXNWH )HOGVWHFKHU%ULOOH)RWR DSSDUDW VRUJIlOWLJEHKDQGHOQ˶+DOWHQ6LHGLHDQ JHJHEHQHQ%HWUL…

Text truncated - open the document above for the full version.

  



 
 





 !" #$%  & '( )* $%'+,-'        



 
 





 !" #$%  & '( )* $%'+,-'



 
 





 !" #$%  & '( )* $%'+,-'                              . /0    1   2  34   102  0  104 4   & +  15  4 46 3 4 0  0   4   102 . "3 7   4  2  0 8      1   2  0    102 . 9 8 %1   1   2  8    102 0 &%      102 22&1 0 3    1   2   6 8    102  7    1            :    1   ;0   22 8  0       102 +  4 8   80   0 !"#$ !"#$< !8    &&  0   8 0    1  $  4  $""# $""#< !8     1    4 0   2 0    $  4  %&'" %&'"< !8     1   0     2 0 0  1  $  0&    5 1&    11          +  4 8  &3   0     1   2   =&1  8    1   2  > 2  4   0    4 4&  !  8  22 3  &  !  0 1  4  2 2 5 1& 0 3      0 8  ( - ?  3 ( 2  )       +  4 8  &3   0      +   &3 4          3   4    1   2   +  &3  4 2   52 4 1  8       0 & 07  4&   1 0 2 30    @ >& 42 &3   0    **+   0 4    &3  0    %    , **+ 2  +   2 2  00  12 4 2  08     2  1  8  0    102



 
 





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



 
 





 !" #$%  & '( )* $%'+,-'    !      +  &42 02  6     1 3 6     102 0 2 30  2&1  8    11 23     0 00  +  2  2 02&  4 0  ( 8 2%    2 4 &3 E + = 4 2  E      E !F #4 6 (&     #     /    $""#0 $ ,      ,    ,    2 1  ;0 4 0 0 22     3 7   4  2  0    2  2     0&    &    0   $ #1  4 12  0  2  4 4 42



 
 





 !" #$%  & '( )* $%'+,-' G 1    2 + 1   ,+ = 0  1   8%1 2 7  22 0  !      ,   *  /            3,/  , 2 , ,    +  ,  & , + ,  %  +   , *          !   ,      &  2 2   2 2  6  2 2 2%6 3  @1      ,,  +             /+ +   ,  ,   +      !     +   ,  ,    , /   ,   9 && 4   8  1    &    2       1  $ * ,   ,  2   ,        *3 :  1  12 7 5 1& 02    % 4 $ !  , ,* * ,,  *    ,+    * , ,     4 1         +,          , 1     & , ,    , +   , + ,        ' 1  + 1  ,  ,  + 1    ,      *  4 102 4 11 2  0 44 4&    00 2 0     ;0    !              , ,              / *         +          =   2       $ 8    42  4  20 !     *  , ,* & , ,     & , ,   +   + 1 ,          , +   !  + +   …

Text truncated - open the document above for the full version.

Hilti, Inc. 7250 Dallas Parkway, Suite 1000 Plano, Texas 75024 800-879-8000 www.hilti.com U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: CT Corporation System Contact Name: Brett Bagwell Street Address:1999 Bryan St., Suite 900, City/Province/Zip:Dallas, TX 75201-3136 Telephone No: 214-979-1172 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: C T Corporation System Date:2/24/2023 Signed by (Printed Name/Title): Sherry McGinnes /Assistant Secretary gy() The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name:Hilti, Inc. Grantee Code:SDL Contact Name:Michael Hoffmann Street Address:7250 Dallas Parkway, Suite 1000 City/Province/Zip:Plano, TX 75024 Telephone No:469-863-9711 Email: [email protected] FRN #: 0005175575 Applicant Signature: Date: Signed by (Printed Name/Title): Michael Hoffmann Vice President Product Safety and Liability 005175575 03/13/2023

012423-17 rev2 Certification Application Attestation Statements American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 Date: February 27, 2023 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Hilti Corporation certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Hilti Corporation (“the applicant”) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Thank you, Signed: Printed: Title: Company Name: Address: Phone: ppa. Dr. Ute Dawin Head of Tool Certification Hilti Entwicklungsgesellschaft mbH Hiltistrasse 6, 86916 Kaufering – Germany +49 8191 90 3803 ppa. Dr. Dieter Profunser Head of Development PT&A Hilti Entwicklungsgesellschaft mbH Hiltistrasse 6, 86916 Kaufering – Germany +49 8191 90 3525 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist .

Leinfelden 11 January 2022 From Our Reference Tel PT-MT/PXP1 Heiko Sgarz +49 711 758-2909 Page 1 of 4 PS85 – FCC Waiver Conditions.docx The PS85 is a device variant of the Bosch D-tect 200 sold under Hilti brand. Condition 1 The PS85 single hop step shall have a bandwidth of less than 1 kHz. Yes. See operation description. Condition 2 The intentional emissions generated by the PS85 must be completely contained within the 1.8 to 5.7 GHz frequency range. Yes. See operation description. Condition 3 The PS85 shall operate with frequency hopped modulation in 30 steps between 1.8 and 5.7 GHz. Yes. See operation description. Condition 4 The PS85 maximum average transmission on-time shall be no less than 50 microseconds, the average transmission off-time shall be 15 microseconds or less. The maximum of the average ramp time shall be 2.3 milliseconds, resulting the maximum average dwell time to be 77 microseconds (2.3 milliseconds / 30 steps = 77 microseconds). Yes. See operation description. Condition 5 The device shall include a feature to ensure that it will only transmit when placed in contact with Issue 1.0 Topic PS85 – FCC Waiver Conditions Description This document describes how the FCC Waiver conditions (DA-22- 8A1) are met. Report From Our Reference Tel PT-MT/PXP1 Heiko Sgarz +49 711 758-2909 Issue Please enter issue Topic Please enter topic Leinfelden 11 January 2022 Page 2 of 4 Report PS85 – FCC Waiver Conditions.docx or close proximity to the building structure being measured and/or evaluated. Yes. See document on “TX disabling logic”. Condition 6 The PS85 will not transmit continuously and will cease transmission 10 seconds after no movement. Yes. See document on “TX disabling logic”. Condition 7 For certification testing, the measurement of the emissions from the Bosch PS85 shall be conducted with the hopping function active. The hopping function has been active for all measurements contained in the test reports as it is active for the series device, if not stated differently. Condition 8 The PS85 devices shall comply with all other technical and operational requirements applicable to UWB wall imaging devices under Part 15, Subpart F of the Commission’s rules. See the test report included. Condition 9 The waiver conditions granted herein are not transferable to any third party via §2.933 or any other means of technology transfer. The waiver will only be used by Robert Bosch LLC and its affiliates including private label customers as discussed with the FCC. Condition 10 This waiver and its conditions shall apply only to the UWB devices described herein and are not to be considered to apply generally to any other UWB operations where further analysis would be necessary to assess the potential for impact to other authorized users. From Our Reference Tel PT-MT/PXP1 Heiko Sgarz +49 711 758-2909 Issue Please enter issue Topic Please enter topic Leinfelden 11 January 2022 Page 3 of 4 Report PS85 – FCC Waiver Conditions.docx We are aware of this. Condition 11 The total U.S. sales of D-tect 200/PS85 devices shall not exceed 6000 devices, annually. Robert Bosch LLC will ensure to limit the sales to the stated number for the sum of devices from Bosch and its affiliates including private label customers. A reporting of the quantities from the records is possible upon request. Condition 12 The PS85 device shall not be marketed for retail consumer markets. The PS85 device will be used by those engaged professionally in the building and construction trades. • $1.300 USD (w/o battery and charger) recommended retail price is high compared to stud finders or common multi detectors in the market ($50-$200), is not likely a not professional user spends this money in this tool. • Hilti tools are for professional use only and distributed via direct sales (a Hilti employee is delivering the tool directly to the customer) to professional construction customers and are available online for key account customers registered as professional construction customers. • Battery platform fits to other Hilti professional tools only • The packaging includes labelling stating “For professional use only.” • The user manual states that “Device operation is limited to those engaged professionally in the building and construction trades.” Condition 13 The PS85 device package shall include labelling stating “For professional use only.” See packaging artwork. Condition 14 The user manual for the PS85 will clearly state that “Device operation is limited to those engaged professionally in the building and construction trades.” See operating instructions, page 8. From Our Reference Tel PT-MT/PXP1 Heiko Sgarz +49 711 758-2909 Issue Please enter issue Topic Please enter topic Leinfelden 11 January 2022 Page 4 of 4 Report PS85 – FCC Waiver Conditions.docx Condition 15 Upon grant of this waiver, Bosch will abide by its commitment to no longer manufacture equipment under the waiver, DA 11-899, granted by OET on May 23, 2011 in ET Docket No. 10- 253. The production of the D-tect150 and private label variants (under the waiver DA 11-899) has been stopped before the waiver grant and will not be started again. Condition 16 A copy of this Order shall be provided with the application for certification of the device. A copy of the waiver is included with the filing. PT-MT/PXP1

Federal Communications CommissionDA 22-8 Before the Federal Communications Commission Washington, D.C. 20554 In the Matter of Robert Bosch LLC Request for Waiver of Sections 15.503(d), 15.503(h), and 15.521(d) of the Commission’s Rules ) ) ) ) ) ) ) ) ET Docket No. 20-268 ORDER Adopted: January 4, 2022Released: January 4, 2022 By the Acting Chief, Office of Engineering and Technology: I.INTRODUCTION 1. By this Order, we grant a request by Robert Bosch LLC (Bosch), for a waiver of our rules governing unlicensed ultra-wideband (UWB) devices to permit the certification and marketing of the newest version of its UWB wall imaging system. We find that opening a path for the sale and operation of this next generation equipment will allow Bosch to deploy its system to enhance the through-wall imaging capabilities for construction professionals, in furtherance of the public interest; and that operation of this device under the specified waiver conditions poses no greater risk of causing harmful interference to communication services than those devices already permitted under the existing rules. II.BACKGROUND 2. On April 13, 2020, Robert Bosch LLC (Bosch) filed a request for waiver of the Commission’s Part 15 ultra-wideband (UWB) rules to allow the marketing and operations of its frequency hopped UWB wall imaging system, known as the Wallscanner D-tect 200 Professional (D-tect 200). 1 Bosch states that the D-tect 200 is a tool for skilled professional deployment in the construction trade, used for detection and inspection of ferrous and non-ferrous metals, electric cables, wooden beams, plastic pipes, and for identification of structural flaws within construction materials. According to the request, the device operates between 1.8 GHz and 5.7 GHz, and hops continuously over the complete operating frequency range from lowest to highest frequency. 2 Bosch states that the application and use of the D-tect 200 is “precisely the same as” its predecessor, the D-tect 150, 3 for which we had previously 1 Robert Bosch LLC Request for Waiver of Section 15.503(h) of the Commission’s Rules to Permit the Marketing, Sale and Operation of Ultra-Wideband Wall Imaging Device; and Waiver of Section s 15.503 (d) and 15.521(d) of the Commission’s Rules Governing Minimum Bandwidth (Bosch waiver request), filed April 13, 2020. 2 See Bosch Comments at 1-2. 3 See Bosch waiver request at 3. Federal Communications CommissionDA 22-8 2 granted a waiver of the definitional requirement in Section 15.503(h) of our rules. 4 The D-tect 150 otherwise operates under our existing rules; as Bosch points out, it uses pulse modulation and operates between the frequency range of 2.2 - 5.8 GHz. 5 The new device, the D-tect 200, incorporates design revisions including changes in circuitry that would not permit it to be authorized under the existing certification issued for the D-tect 150. 3. Specifically, Bosch seeks a rule waiver to permit it to use a frequency hopping configuration, which is new to the D-tect model design. 6 Bosch asks for a waiver of section 15.503(d), which requires that a UWB transmitter at any point in time have a fractional bandwidth equal to or greater than 0.20 or a UWB bandwidth equal to or greater than 500 MHz, regardless of the fractional bandwidth. Bosch also requests a related …

Text truncated - open the document above for the full version.