SDL-PRA2XR01Laserdetector

PRA 25 Operating instructions (draft) en PRA 25 laser detector Contents / 1. General Information It is essential that the operating instructions are read before the tool is used the first time. Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. Component parts PRA 25 laser detector 1. On / off key 2. Laser detection tolerance setting key (standard or fine) 3. Key for setting the audible signal 4. Audible signal emission aperture 5. ==> the 6 additional remote control keys have to be added 6. Detection area 7. Display, front side (see detailed illustration) 8. Marking notch 9. Reference plane 10. Battery cover 11. Mounting thread 12. Display, rear side 13. Tolerance indicator (standard or fine) 14. Indicator showing position of detector relative to laser plane 15. Battery condition indicator PRA 75 laser detector holder 16. Detector mounting screw 17. Leveling staff clamping screw Contents Page 1. General information ...........................1 2. Description .........................................2 3. Technical data ....................................2 4. Safety precautions .............................2 5. Getting started ...................................3 6. Operation ...........................................4 7. Hilti calibration service .......................4 8. Care and maintenance .......................4 9. Disposal .............................................5 10. Warranty ............................................5 11. FCC statement ....................................6 12. EC declaration of conformity ..............6 Formatiert: Nummerierung und Aufzählungszeichen Formatiert: Nummerierung und Aufzählungszeichen Gelöscht: 20 Gelöscht: 20 Gelöscht: 20 1. General information 1.1 Safety notices and their meaning - CAUTION - This word indicates a possibly hazardous situation which could result in slight bodily injuries or damage to property. - NOTE - This word indicates information to help the user employ the product efficiently, and other useful notes. 1.2 Pictograms Warning signs General warning Symbols Read the operating instructions before use. 2 2. Description / 3. Technical data / 4. Safety precautions _ These numbers refer to the corresponding illustrations. The illustrations can be found on the fold-out over pages. Keep these pages open when studying the operating instructions. In these operating instructions, the PRA 20 laser detector is referred to as "the tool". 2. Description 2.1 PRA 25 laser detector The Hilti PRA 25 is designed to detect the laser beam emitted by rotating lasers. 2.2 Features The detector can be employed as a handheld tool or may be mounted on the measuring staff, telescopic staff or on other leveling staffs, wooden battens or frames etc. when the appropriate holder is used. Items supplied 1 PRA 25 laser detector 1 PRA 25 operating instructions 2 batteries (size AA cells) 3. Technical data Range (diameter) 2 to 200m (6 to 650 ft) Laser plane detection tolerance (at 10m) Fine: ± 0.5 mm (0.02 inch) Standard: ± 1.0 mm (0.04 inch) Audible signal 2 volume levels or silent operation Liquid crystal display On both sides Detection window 80 mm (2 3/4 inches) Center indicator, from top edge of housing 50 mm ( 2 inches) Marking notches Formatiert: Englisch (Großbritannien) Gelöscht: 20 Gelöscht: 20 Gelöscht: 20 Gelöscht: 20 Gelöscht: 400m Gelöscht: 1300 On both sides Automatic cut-out The detector switches itself off after 30 min. when no laser beam is detected. Dimensions 165x67x24mm (6.5"x2.6"x0.9" inches) Weight 0.2 kg (0.4 lbs) including batteries Power supply 2 x size AA batteries Battery life at 20°C [+68°] Alkaline batteries: > approx. 30 hours Operating temperature -20° to +50°C (-4° to +122°F) Storage temperature -30° to +60°C (-22° to +140°F) Protection class IP 56 (as per IEC 529) Mounting thread on detector M5 x 10 mm (0.4 inch) 4. Safety precautions 4.1 Basic information concerning safety In addition to the information relevant to safety given in each of the sections of these operating instructions, the following points must be strictly observed at all times. 3 4. Safety precautions / 5. Getting started 4.2 Misuse - Modification of the tool is not permissible. - (Requested by FCC §15.21): Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Observe the information printed in the operating instructions concerning operation, care and maintenance. - Have the tool repaired only at a Hilti service centre. Failure to follow the correct procedures when opening the tool may cause emission of laser radiation in excess of class 2. - Take the surrounding conditions into account. Do not use the tool where there is a risk of fire or explosion. 4.3 Proper organization of the workplace - Avoid unfavorable body positions when working on ladders. Make sure you have a stable stance and stay in balance at all times. - Measurements taken through panes of glass or other objects may be inaccurate. - Use the tool only within its specified limits. Gelöscht: 50 4.3.1 Electromagnetic compatibility Although the tool complies with the strict requirements of the relevant guidelines, Hilti cannot entirely rule out the following possibilities: - The tool may cause interference to other equipment, e.g. aircraft navigational equipment. - The tool may be subject to interference caused by powerful radiation, which can then lead to incorrect operation. Check the readings for plausibility when measuring in these conditions or if you are unsure of the results. 4.4 General safety precautions - Check the tool before use. If the tool is found to be damaged, have it repaired at a Hilti service center. - The accuracy of the tool must be checked after it has been dropped or subjected to other mechanical stressing. - If mounting on an adaptor, ensure that the tool is screwed on secur…

Text truncated - open the document above for the full version.

SAMPLE CONFIDENTIALITY FORM Hilti Corporation FL-9494 Schaan, Principality of Liechtenstein Feldkircherstrasse 100 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Section 0.457(d)(2)(i) pertaining to confidential material. Hilti Corporation would like the following documents regarding this submission for FCC ID: SDL- PRA2XR01 to be kept confidential. 1. Operational Description PRA2X (Filename: technical_description_29072004.pdf) 2. Block Diagram (Filename: block_diagram_pra25.pdf) 3. Schematic PRA 25, DOC00083602 / DOC00083604 / DOC00083605 (Filename: schematic_pra25_25032004.pdf) The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Dipl.-Ing. Wilfried Kaneider Dr. Reinhard Waibel

Laserdetector PRA25 T24899-00-01XF External Photo Rear view External Photo Front view

Laserdetector PRA25 T24899-00-01XF Internal Photo Open view Laserdetector PRA25 T24899-00-01XF Internal Photo Open view Internal Photo Open view Laserdetector PRA25 T24899-00-01XF Internal Photo Front view PCB Internal Photo Front view of PCB (without Display) Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Front view PCB Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Front view PCB Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Rear view PCB Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Rear view PCB

FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 1 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 TTI - P-G 089 / 94-11 DAT - P-011 / 91-02 EMI -- T E S T R E P O R T Test Report No. : T 24899-00-01XF 05. August 2004 ______________________________________________________________________________________________ Date of issue Type / Model : PRA 25 Model Description : Laserdetector Applicant : Hilti Corporation Address : Feldkircherstrasse 100 FL-9494 Schaan, Principality of Liechtenstein Manufacturer : KOSTAL Industrie Elektronik GmbH Address : Hauert 11, D-44227 Dortmund, Germany Licence holder : Hilti Corporation Address : Feldkircherstrasse 100 FL-9494 Schaan, Principality of Liechtenstein Test Result according to the standards listed in clause 1 test standards: POSITIVE The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 2 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Contents 1 TEST STANDARDS 3 2 SUMMARY 4 3 EQUIPMENT UNDER TEST 5 3.1 PHOTO DOCUMENTATION OF THE EUT 5 3.2 POWER SUPPLY SYSTEM UTILISED 13 3.3 SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) 13 4 TEST ENVIRONMENT 14 4.1 ADDRESS OF THE TEST LABORATORY 14 4.2 ENVIRONMENTAL CONDITIONS 14 4.3 STATEMENT OF THE MEASUREMENT UNCERTAINTY 14 4.4 MEASUREMENT PROTOCOL FOR FCC, VCCI AND AUSTEL 14 5 TEST CONDITIONS AND RESULTS OF TRANSMITTER PART 17 5.1 CONDUCTED DISTURBANCE (SUBPART 15.207) 17 5.2 RADIATED POWER OF THE FUNDAMENTAL WAVE (SUBPART 15.249) 18 5.3 RADIATED EMISSIONS (ELECTRIC FIELD) 30 MHZ - 24 GHZ (SUBPART 15.249) 20 5.4 CORRECTION FOR PULSE OPERATION (DUTY CYCLE) (SUBPART 15.35(C)) 23 6 TEST CONDITIONS AND RESULTS OF RECEIVER PART 25 6.1 CONDUCTED DISTURBANCE (SUBPART 15.107) 25 6.2 RADIATED EMISSIONS (ELECTRIC FIELD) 30 MHZ - 24 GHZ (SUBPART 15.109) 26 7 USED TEST EQUIPMENT AND ACCESSORIES 29 FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 3 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 1 TEST STANDARDS The tests were performed according to following standards: - Part 15 Subpart C (15.249) Radio Frequency Devices Subpart C for intentional Radiators operating within the bands 902-928 MHz, 2400-2483,5 MHz, 5725-5875MHz and 24,0-24,25GHz. - Part 15 Subpart B (15.109) Radio Frequency Devices Subpart B for unintentional Radiators FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 4 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 2 SUMMARY GENERAL REMARKS: The EuT is a Transceiver and is operating on frequency 2402,00 MHz. It is only possible to adjust the frequency and the RF output power from the manufacturer for test purposes. For the manufacture in series, all settings will be saving in the EPROM of the Eut and cannot be change from the customer. All tests were performed at frequency 2402,00 MHz. The frequency range was scanned from 25 MHz to 24000 MHz. All emissions not reported in this test report were more than 10dB below the specified limit. FINAL ASSESSMENT: The equipment under test fulfills the EMC requirements cited in clause 1 test standards. Date of receipt of test sample : acc. to storage records of MBPS Testing commenced on : July 01, 2004 Testing concluded on : July 02, 2004 Checked by: Tested by: _______________________________ _____________________________ Günter Mikes Xaver Fischer Dipl. Ing.(FH) FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 5 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 3 EQUIPMENT UNDER TEST 3.1 Photo documentation of the EuT Laserdetector PRA25 T24899-00-01XF External Photo Rear view External Photo Front view FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 6 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Open view FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 7 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Open view Internal Photo Open view FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 8 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Front view PCB Internal Photo Front view of PCB (without Display) FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 9 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Front view PCB FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 10 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Front view PCB FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 11 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Part of Rear view PCB FCC ID: SDL-PRA2XR01 File No. T 24899-00-01XF, page 12 of 29 MIKES BABT Product Service GmbH x Ohmstrasse 2-4 x D-94342 Strasskirchen x Tel.:+49 9424-9407-0 x Fax:+49 9424-9407-60 Rev. No. 9.2 Laserdetector PRA25 T24899-00-01XF Internal Photo Part of…

Text truncated - open the document above for the full version.

Test Setup Photos T24899-00-01XF Transmitter Part Radiated Power of the fundamental wave (Subpart 15.249) Radiated emissions (electric field) 30 MHz - 24 GHz (Subpart 15.249) Correction for Pulse Operation (Duty Cycle) (Subpart 15.35(c)) Test setup photos T24899-00-01XF Receiver Part Radiated emissions (electric field) 30 MHz - 24 GHz (Subpart 15.109)