SDNTA-304BBluetooth Speaker

Size: 148.5(W) x 210(H)mm (A5) TOWER SPEAKER SYSTEM WITH BLUETOOTH ® WIRELESS TECHNOLOGY TOWER SPEAKER SYSTEM WITH BLUETOOTH ® WIRELESS TECHNOLOGY Model: TA-304B PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Owner's Manual 1 3 2 4 1 5 6 Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the unit. Insert the AC/DC adaptor to a wall outlet having AC 100-240V~, 50/60Hz . TO DC IN JACK To Wall Outlet NOTE: This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position. 2. Wooden Base as the figures above. 1. Assembly the two wooden bases to the bottom of unit by the supplied assembly screws and screwdriver as the figure above. Supplied screwdriver 10 9 11 12 13 14 15 6 78 1 2 4 1. FM ANT (FM ANTENNA) 2. POWER ON/OFF SWITCH 3. DC IN JACK 4. AUX IN 2 JACKS 5. AUX IN 1 JACK 7. AUX 1 INDICATOR 8. AUX 2 INDICATOR 9. STANDBY/FM INDICATOR 10. SOURCE BUTTON 11. STANDBY ON/OFF BUTTON 12. VOL - (VOLUME DOWN) BUTTON 13. VOL + (VOLUME UP) BUTTON 14. TUNE +/ BUTTON 15. TUNE -/ BUTTON 5 3 5 6. (BLUE TOOTH) INDICATOR 1. Standby ON/OFF BUTTON 2. (MUTE) BUTTON 3. SOURCE BUTTON 4. RESET BUTTON 5. TUNE -/ BUTTON 8. VOL (VOLUME) +/- BUTTONS 9. TREBLE +/- BUTTONS 10. BASS +/- BUTTONS 6. (PLAY/PAUSE) BUTTON 7. TUNE +/ BUTTON 2 1 5 3 8 7 6 4 10 9 BATTERY PRECAUTIONS: CONNECTION 8 Connect to External Audio Device with 3.5mm Jack: Connect to External Video/Audio Device with RCA Jacks: 1. Connected the external Audio or Video/Audio Devices to the unit as previous procedures. 2. Slide the POWER ON/OFF Switch on the rear of unit to ON position to turn the unit to Standby mode. The Power Indicator will light. 3. Press and hold the button on the unit or press the button on the Remote Control to turn on the unit from Standby mode. 4. Press the SOURCE button on the unit or Remote Control to select input source as desire. A. If FM (Radio) is selected, STANDBY/FM Indicator will blink: i. Press the TUNE +/ button repeatedly to search and plays the next available FM station. ii. Press the TUNE -/ button repeatedly to search and plays the previous available FM station. iii. To searching the stations from begin. Press the RESET button on the Remote Control to reset the radio to minimum frequency. Notes: The Antenna wire on the rear of unit is for radio reception. If reception is weak, unwound and extended the wire or relocation the wire to improve the radio reception. If a stereo FM station was searched, the unit will plays it in stereo mode automatically. B. If AUX 1 is selected, the AUX 1 Indicator will light. Plays the music in the AUX 1 connected Audio device as usual. C. If AUX 2 is selected, the AUX 2 Indicator will light. Plays the video or music in the AUX 2 connected Video/Audio device as usual. D. If BT (Blue Tooth) is selected, the Indicator will light and blinking. If this is the first time to use BT or re-pairing the unit to a new BT device, pairing the unit to external BT device as bellows: i. Power on the external BT device and enter to searching mode. ii. Start pairing as the on screen instructions on the external BT device. iii. After paired, the Indicator will stop blinking. (For details pairing procedures, please refer to the user’s manual of your BT device.). Notes: When the external BT device searched the unit, our model number “CHT 941” will appears on the display of external BT device. Pairing code “0000” may need to enter. Normal operation after paired: i. Turn on the BT function of the external BT device. ii. Power on the unit and selected the input source to BT as previous procedures. iii. Wait a few seconds until the unit paired to the external BT device automatically. (The Indicator will stop blinking). iv. Plays the music in the paired BT device as usual. 5. Press the VOL (Volume) +/- buttons to adjust volume level. 6. Press the button on the remote control to turn off the sound temporary, press again to turn the sound back. 7. Press the BASS +/- buttons on the remote control to enhance or reduce the bass level (low audio frequency) as desire. 8. Press the TREBLE +/- buttons on the remote control to enhance or reduce the treble level (high audio frequency) as desire. 9. When finished, press and hold the button on the unit or press the button on the Remote Control to turn off (standby) the unit. NOTE: If long period of time will not use the unit, power off the unit by slide the POWER Switch to OFF position or unplug the AC/DC Adaptor from the unit and wall outlet. 9 OPERATIONS: iv. Plays the music in the paired BT device as usual. 1 x Remote Control ( uses 1 x CR 2025 button cell,induded ) A )2,V21 CD tuptuO 1 x Audio Connection Cable with 3.5mm Stereo plugs 1 x User's Manual 2 x Wooden Stand 6 x Assembly Screws 1 x Screwdriver 1 x AC/DC Adaptor ( Input: AC 100-240V~,50/60Hz 1A; Accessories: FM 87.5-108 MHz DC 12V,2A 4 x 4 Ohms, 6 W DC 3V,1 x CR 2025 button cell (Included) 10 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu…

Text truncated - open the document above for the full version.

Tonika Electronics Technology (Shenzhen) Co., Ltd. FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name Tonika Electronics Technology (Shenzhen) Co., Ltd. Addresss No. 55 Busha Road, No. 2 Shanwei Industrial Estate Zhangshubu Commune, Nanwan Town City Shenzhen Country China declare that the following representative (agent): Name (person) Jim.he Company name Shenzhen STONE Testing Technology Co.,Ltd. Addresss F/6, Bldg.12, Zhongxing Industrial City, Chuangye Rd., Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth Speaker Type or Model(s) TA-304B,TA-304BDL, CHT941，CHT954 Tradename or Brand(s) N/A We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2014.1.25 XIANG DONG Sales Manager

Tonika Electronics Technology (Shenzhen) Co., Ltd. FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Tonika Electronics Technology (Shenzhen) Co., Ltd. Addresss No. 55 Busha Road, No. 2 Shanwei Industrial Estate Zhangshubu Commune, Nanwan Town City Shenzhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: SDN - TA-304B of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2014.1.25 XIANG DONG Sales Manager

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 v Photo 4 Photo 5 Photo 6 Photo 7

FM receiver

Bluetooth Speaker Model Name：TA-304B FCC ID: SDNTA-304B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14

FCC ID: SDNTA-304B RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Maximum measured transmitter power 1Mbps Frequency (MHZ) Max Antenna Gain (dBm) EIRP (dBm) EIRP (mW) 2402 0 -0.945 0.80 2441 0 0.854 1.22 2480 0 0.098 1.02 2Mbps Frequency (MHZ) Max Antenna Gain (dBm) EIRP (dBm) EIRP (mW) 2402 0 -1.738 0.67 2441 0 0.033 1.01 2480 0 0.388 1.09 3Mbps Frequency (MHZ) Max Antenna Gain (dBm) EIRP (dBm) EIRP (mW) 2402 0 -1.6 0.69 2441 0 0.156 1.04 2480 0 0.468 1.11 Refer to 447498 25 D01 General RF Exposure Guidance v05 Appendix A, you see that for Maximum Conducted AV Output Power 1.22 mW(<10mW), so no SAR is required.

FCC RADIO TEST REPORT FCC ID: SDNTA-304B Product： Bluetooth Speaker Trade Name： N/A Model Name： TA-304B Serial Model： TA-304BDL, CHT941，CHT954 Prepared for Tonika Electronics Technology (Shenzhen) Co., Ltd. No. 55 Busha Road, No. 2 Shanwei Industrial Estate Zhangshubu Commune, Nanwan Town Shenzhen China Prepared by Shenzhen STONE Testing Technology Co.,Ltd. F/6, Bldg.12, Zhongxing Industrial City, Chuangye Rd., Nanshan District Shenzhen P.R. China Page 2 of 75 Report No.: STT-2014DG0125011F TEST RESULT CERTIFICATION Applicant’s name............. Tonika Electronics Technology (Shenzhen) Co., Ltd. Address ............................. No. 55 Busha Road, No. 2 Shanwei Industrial Estate Zhangshubu Commune, Nanwan Town Shenzhen China Manufacture's Name........ Tonika Electronics Technology (Shenzhen) Co., Ltd. Address ............................. No. 55 Busha Road, No. 2 Shanwei Industrial Estate Zhangshubu Commune, Nanwan Town Shenzhen China Product description Product name ......................Bluetooth Speaker Model and/or type reference .......................... TA-304B Serial Model： TA-304BDL, CHT941，CHT954 Standards......................... FCC Part15.247 Test procedure ..................... ANSI C63.4-2003 This device described above has been tested by STT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STT, this document may be altered or revised by STT, personal only, and shall be noted in the revision of the document. Date of Test........................................ Date (s) of performance of tests ......... 16 Jan. 2014 ~25 Jan. 2014 Date of Issue....................................... 25 Jan. 2014 Test Result........................................... Pass Testing Engineer : (Eric Wang) Technical Manager : (Jerry You) Authorized Signatory : (Jack yu) Page 3 of 75 Report No.: STT-2014DG0125011F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 9 2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BELOW 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30M – 1000 MHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 23 4 . NUMBER OF HOPPING CHANNEL 33 4.1 APPLIED PROCEDURES / LIMIT 33 4.1.1 TEST PROCEDURE 33 4.1.2 DEVIATION FROM STANDARD 33 4.1.3 TEST SETUP 33 4.1.4 EUT OPERATION CONDITIONS 33 4.1.5 TEST RESULTS 34 5 . AVERAGE TIME OF OCCUPANCY 36 5.1 APPLIED PROCEDURES / LIMIT 36 Page 4 of 75 Report No.: STT-2014DG0125011F Table of Contents Page 5.1.1 TEST PROCEDURE 36 5.1.2 DEVIATION FROM STANDARD 36 5.1.3 TEST SETUP 37 5.1.4 EUT OPERATION CONDITIONS 37 5.1.5 TEST RESULTS 38 6 . HOPPING CHANNEL SEPARATION MEASUREMENT 44 6.1 APPLIED PROCEDURES / LIMIT 44 6.1.1 TEST PROCEDURE 44 6.1.2 DEVIATION FROM STANDARD 44 6.1.3 TEST SETUP 44 6.1.4 EUT OPERATION CONDITIONS 44 6.1.5 TEST RESULTS 45 7 . BANDWIDTH TEST 51 7.1 APPLIED PROCEDURES / LIMIT 51 7.1.1 TEST PROCEDURE 51 7.1.2 DEVIATION FROM STANDARD 51 7.1.3 TEST SETUP 51 7.1.4 EUT OPERATION CONDITIONS 51 7.1.5 TEST RESULTS 52 8 . PEAK OUTPUT POWER TEST 58 8.1 APPLIED PROCEDURES / LIMIT 58 8.1.1 TEST PROCEDURE 58 8.1.2 DEVIATION FROM STANDARD 58 8.1.3 TEST SETUP 58 8.1.4 EUT OPERATION CONDITIONS 58 8.1.5 TEST RESULTS 59 9 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 65 9.1 DEVIATION FROM STANDARD 65 9.2 TEST SETUP 65 9.3 EUT OPERATION CONDITIONS 65 9.4 TEST RESULTS 66 10 . ANTENNA REQUIREMENT 73 10.1 STANDARD REQUIREMENT 73 10.2 EUT ANTENNA 73 11 . EUT TEST PHOTO 74 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 75 Report No.: STT-2014DG0125011F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(a)(1) Hopping Channel Separation PASS 15.247(b)(1) Peak Output Power PASS 15.247(c) Radiated Spurious Emission PASS 15.247(a)(iii) Number of Hopping Frequency PASS 15.247(a)(iii) Dwell Time PASS 15.247(a)(1) Bandwidth PASS 15.205 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 75 Report No.: STT-2014DG0125011F 1.1 TEST FACILITY Shenzhen STONE Testing Technology Co.,Ltd. Add. : F/1, Bldg.12, Zhongxing Industrial City, Chuangye Rd., Nanshan District Shenzhen China FCC Registration No.: 323508; IC Registration No.: 11043A 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 75 Report No.: STT-2014DG0125011F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Bluetooth Speaker Model Name TA-304B Serial Model TA-304BDL, CHT941，CHT954 Model Difference All models are identical except model name. Product Description The EUT is a Bluetooth Speaker Operation …

Text truncated - open the document above for the full version.

Page 74 of 75 Report No.: STT-2014DG0125011F 11. EUT TEST PHOTO Radiated Measurement Photos Page 75 of 75 Report No.: STT-2014DG0125011F CONDUCTED EMISSION Photo