SGPG07UF02Dongle

CERTIFICATE OF COMPLIANCE Ref No.: NEI-FCCE-1-1303C163 Date of Issue: Jun. 11, 2013 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Dongle Model Name G07UF Brand Name DELUX Applicant Shenzhen Delux Industry Co., Ltd. Address Delux Industrial Park, lan zhu road, ping shan street, long gang borough, Shenzhen, China Measurement FCC Part 15, Subpart B:2011 Standards ANSI C63.4 (2009) The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCE-1-1303C163) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No.37, Lane 365, Yang Guang St., NeiHu District 114., Taipei, Taiwan TEL：+886-2-2657-3299 FAX：+886-2-2657-3331

Neutron Engineering Inc. Project No.: 1303C163 Page 2 of 5

Neutron Engineering Inc. Project No.: 1303C163 Page 3 of 5 Neutron Engineering Inc. Project No.: 1303C163 Page 4 of 5 Neutron Engineering Inc. Project No.: 1303C163 Page 5 of 5

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 1 of 64 FCC Radio Test Report FCC ID: SGPG07UF02 This report concerns (check one): Original Grant Class II Change Issued Date : Jun. 11, 2013 Project No. : 1303C163 Equipment : Dongle Model Name : G07UF Applicant : Shenzhen Delux Industry Co., Ltd. Address : Delux Industrial Park, lan zhu road, ping shan street, long gang borough, Shenzhen, China Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Mar. 25, 2013 Date of Test: Mar. 25, 2013 ~ Jun. 10, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 2 of 64 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 3 of 64 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 23 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 30 5 . NUMBER OF HOPPING CHANNEL 42 5.1 APPLIED PROCEDURES / LIMIT 42 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 42 5.1.2 TEST PROCEDURE 42 5.1.3 DEVIATION FROM STANDARD 42 5.1.4 TEST SETUP 42 5.1.5 EUT OPERATION CONDITIONS 42 5.1.6 TEST RESULTS 43 6 . AVERAGE TIME OF OCCUPANCY 44 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 4 of 64 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 44 6.1.1 MEASUREMENT INSTRUMENTS LIST 44 6.1.2 TEST PROCEDURE 44 6.1.3. TEST SETUP LAYOUT 44 6.1.4. TEST DEVIATION 44 6.1.5. EUT OPERATION DURING TEST 44 6.1.6. TEST RESULTS 45 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 47 7.1 APPLIED PROCEDURES / LIMIT 47 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 47 7.1.2 TEST PROCEDURE 47 7.1.3 DEVIATION FROM STANDARD 47 7.1.4 TEST SETUP 47 7.1.5 EUT OPERATION CONDITIONS 47 7.1.6 TEST RESULTS 48 8 . BANDWIDTH TEST 50 8.1 APPLIED PROCEDURES / LIMIT 50 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 50 8.1.2 TEST PROCEDURE 50 8.1.3 DEVIATION FROM STANDARD 50 8.1.4 TEST SETUP 50 8.1.5 EUT OPERATION CONDITIONS 50 8.1.6 TEST RESULTS 51 9 . PEAK OUTPUT POWER TEST 53 9.1 APPLIED PROCEDURES / LIMIT 53 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 53 9.1.2 TEST PROCEDURE 53 9.1.3 DEVIATION FROM STANDARD 53 9.1.4 TEST SETUP 53 9.1.5 EUT OPERATION CONDITIONS 53 9.1.6 TEST RESULTS 54 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 56 10.1 APPLIED PROCEDURES / LIMIT 56 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 56 10.1.2 TEST PROCEDURE 56 10.1.3 DEVIATION FROM STANDARD 56 10.1.4 TEST SETUP 56 10.1.5 EUT OPERATION CONDITIONS 56 10.1.6 TEST RESULTS 57 11 . EUT PHOTOS 63 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 5 of 64 1. CERTIFICATION Equipment : Dongle Brand Name : DELUX Model Name : G07UF Applicant : Shenzhen Delux Industry Co., Ltd. Date of Test : Mar. 25, 2013 ~ Jun. 10, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1303C163) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 6 of 64 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: APPLIED STAND…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 63 of 64 11. EUT PHOTOS Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1303C163 Page 64 of 64 Radiated Measurement Photos