SHXA733GSM-USATelemetry device using GSM/DCS technology

A73x addWAVE User Guide valid for A731, A732, A733 and A733GSM RTUs Release 2.0 and higher Rel. 2.1 / September 2004 Proprietary Notice: The Adcon logo, the A720 series and addIT™, the A730 series and addWAVE, addVANTAGE and AgroExpert™ are trademarks or registered trademarks of Adcon Telemetry GmbH. All other registered names used throughout this publication are trademarks of their respective owners. This publication contains confidential information, property of Adcon Telemetry GmbH. Disclosure to third parties of the information contained herein is prohibited. Neither the whole nor any part of the information contained in this publication may be reproduced in any material form except with the prior written permission of Adcon Telemetry GmbH. Release 2.1, September 2004 Copyright © 2004 by Adcon Telemetry GmbH. All rights reserved. ADCON TELEMETRY GmbH INKUSTRASSE 24 A-3400 KLOSTERNEUBURG AUSTRIA TEL: +43-2243-38280-0 FAX: +43-2243-38280-6 http://www.adcon.at Table of Contents 3 Table of Contents 1 Introduction ......................................................................... 5 1.1 About the addWAVE A73x...............................................................5 1.2 Compliance Statement and Warnings .............................................6 1.3 Conventions .....................................................................................7 2 Using the A73x RTU ............................................................ 9 2.1 Opening the packages .....................................................................9 2.2 Installing the RTU...........................................................................10 2.3 Special notes for the A733GSM RTU ............................................11 2.4 Field Installation .............................................................................13 2.5 More about the LED tool ................................................................14 2.6 Configuring an A73x RTU in the addVANTAGE software..........................................................................................15 2.7 Maintaining and servicing the RTU ................................................15 2.7.1 The RTU battery.............................................................................15 2.7.2 Changing the battery......................................................................16 3 Performing Advanced Functions ..................................... 19 3.1 Understanding connectors .............................................................19 3.1.1 The RTU connectors ......................................................................19 3.1.2 The POWER Connector.................................................................20 3.2 Communicating with the RTU ........................................................21 3.3 Serial communication protocol.......................................................22 3.3.1 General format of a command .......................................................22 3.3.2 General format of an answer .........................................................22 3.4 Using terminal commands .............................................................23 CMDS.............................................................................................23 TIME...............................................................................................23 Table of Contents 4 FREQ .............................................................................................23 RSSI ...............................................................................................24 ID....................................................................................................24 SLOT ..............................................................................................25 SST ................................................................................................25 PMP ...............................................................................................25 ANLG .............................................................................................26 DATA..............................................................................................29 IMME ..............................................................................................31 FDEV..............................................................................................31 INFO...............................................................................................32 PORT .............................................................................................33 RX ..................................................................................................36 TX...................................................................................................36 B .....................................................................................................37 BLST ..............................................................................................37 VER ................................................................................................38 SDI .................................................................................................38 DATASDI........................................................................................39 SDA ................................................................................................41 FPC ................................................................................................41 GSMPIN .........................................................................................42 GSMPUK........................................................................................42 GSMSTAT......................................................................................42 3.5 Notifications....................................................................................43 3.6 Returned errors list .......…

Text truncated - open the document above for the full version.

Coverletter: Adcon Telemetry GmbH wants to get FCC-Certification for the following product: Telemetry transceiver using GSM technology in the broadband PCS Band (FCC Part 24, Subpart E) A733-US cellular The unit will get the following FCC-ID: SHXA733GSM-USA List of documents: Exhibit Thema File Exhibit 01 Label and placement a733_gsm_us_links2.jpg a733_gsm_us_rechts_neu.jpg Exhibit 02 Not needed -------------------- Exhibit 03 External Photos Extern_A733GSM_USA_Tuev1.0.pdf * Exhibit 04 Block Diagrams Block_A733GSM_USA_Tuev1.0.pdf * Exhibit 05 Schematic Diagrams Schematics_A733GSM_USA_Tuev1.0.pdf Exhibit 06 Testreport 04-124.pdf Exhibit 07 Test Set-up Photos setup_04-124.pdf Exhibit 08 User Manual A733_UserGuide_English_V21_01.pdf Exhibit 09 Internal Photos Inside_A733GSM_USA_Tuev1.0.pdf Exhibit 10 Not needed -------------------- Exhibit 11 RF exposure issues RF exposure compliance issues.doc *Exhibit 12 Operational Description Description_A733GSM_USA_Tuev1.0.pdf Software_A733GSM_USA_Tuev1.0.pdf Exhibit 13 Cover letter Request for confidentiality This file FCC.pdf For the Exhibits marked with ‘*’ Adcon Telemetry GmbH requested Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of Know-How or sensitive data, it will not be provided to the public. The labelling on some photos may not be the actual status. The correct labelling you can in Exhibit 1.

Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 U.S.A. Klosterneuburg, Sept. 08, 2004 Confidentiality Request Our FRN: 0011471562 Our FCC Code 1: SHX TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Adcon Telemetry GmbH requests confidential- ity for the following product: FCC ID Number Title/Model SHXA733GSM-USA A733 addWAVE GSM, US Version For the product stated above we request that the following information be held confidential: 1. Block Diagram, circuit diagrams, BOM and PCBs submitted as Chapter 2 of the attached “A733GSM-USA RTU Technical Reference Manual, 1900MHz Model”. 2. Software control commandset submitted as Chapter 3.3 of the attached “A733GSM-USA RTU Technical Reference Manual, 1900MHz Model”. The above exhibits contain Adcon Telemetry GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our wireless data logger. This material is not customarily available to the general public and we request that it be with- held from public inspection. For any and all questions please feel free to contact me at the address shown in the letter- head or under my personal email address [email protected] Sincerely, Bernhard Pacher CEO

2.6. A733GSM-USA DEVICE’S PHOTOGRAPHS CHAPTER 2. HARDWARE 2.6 A733GSM-USA Device’s Photographs Figure 2.8: A733GSM-USA, Front view. Figure 2.9: A733GSM-USA, Back view. 22 CHAPTER 2. HARDWARE 2.6. A733GSM-USA DEVICE’S PHOTOGRAPHS Figure 2.10: A733GSM-USA, Top view. Figure 2.11: A733GSM-USA, Bottom view. 23

CHAPTER 2. HARDWARE 2.6. A733GSM-USA DEVICE’S PHOTOGRAPHS Figure 2.14: A733GSM-USA, Case opened. Figure 2.15: A733GSM-USA Motherboard, top view. Figure 2.16: A733GSM-USA Motherboard, bottom view. 25 2.6. A733GSM-USA DEVICE’S PHOTOGRAPHS CHAPTER 2. HARDWARE 26

Federal Communications Commission Equipment Approval Services P.O.Box 358315 Pittsburgh PA 15251-5315 U.S.A. Klosterneuburg, Nov. 22, 2004 Our application for FCC approval, FCC Identifier SHXA733GSM-USA: Tune Up Info for Q2426 GSM-Module Dear Ladies and Gentlemen, For radio communication purposes we have implemented the Wavecom Q2426 GSM modem into the above mentioned device. We have not made any changes to this modem whatsoever, but only connected it to our device’s PCB through the standard connector provided by Wavecom. Said Wavecom modem has received it’s own type approval in combination with the evaluation board provided by Wavecom, FCC Identi- fier O9EQ2426-SK. Since said evaluation board is not used in our application a separate type approval is required. The Adcon A733 GSM, FCC ID SHXA733GSM-USA, does not apply any changes or modifications to this module neither in respect of it’s hardware nor firm- ware nor the tune-up procedures. We therefore kindly request your approval for our SHXA733GSM-USA RTU. Best regards, Bernhard Pacher Managing Director Adcon Telemetry GmbH

AdconA733GSMRTU,Differencesto theWavecomWismoQuik ReferenceDesign 22.November2004 1Overview FollowingitemshavebeenscannedfordifferencestotheReferenceDesign: SerialLink KeypadInterface SIMConnection PowerSupply Audio RF 2Details 2.1SerialLink TheseriallinkI/Osignalsare connectedtoa UART andtothe
Controller wihtoutanyactivecomponentsexceptforthesignalTXD.Thissignalis gene- ratedbya TinyLogicGate,whichis poweredfromthe2.8VVCCoutputfrom themodule.AllotherInputstothemodulehaveseriesresistorsaccordingto theìApplicationNoteforIntegrationî.Allseriallinksignalsare keptinternal, sonoESDprotectionis needed. Riseandfallingtimeis kept< 200ns. ThesignalDSRis notusedinthedesignandis leftopen. 2.2KeypadInterface Thekeypadinterfaceis notusedandleftunconnected. 1 2.3SIMConnection Nodifferencesexceptfortheconnector. TheConnectorisa AmphenolC707 Series. 2.4PowerSupply Nodifferencesexceptforthevoltage.Theregulatorsoutputvoltageissetto 3.75V. 2.5Audio Theaudiosignalsare notusedandare leftunconnected. 2.6RF TheantennaassemblyissoldereddirectlytotheRFpadsofthemodule.The antennaitselfis connectedthroughanTNCconnectoronthetopoftheenclos- ure. 2

RF exposure compliance issues: This telemetry device is normally used only at fixed locations far away from persons. It is collecting data from various sensors and transmitting it through the GSM network. According to Supplement C of OET Bulletin 65 for fixed transmitters operating in the broadband PCS band evaluation is not required when the total power of all channels used is below or equal to 2000 W ERP. This device only uses one channel in the PCS 1900 MHz Band with a maximum power output of 1 Watt, and ERP not exceeding 2 Watts. So this device is excluded from routine evaluation. It must be operated only as fixed device, never should be used as mobile or portable device.