SIFCMCSENS0108V2CMC TC SD - Wireless Sensor Network

11.04.2008 Request for Confidentiality Nanotron Technologies GmbH FCC ID: SIFCMCSENS0108V2 FCC Part 15 Certification Gentlemen, In accordance with 0.459 of CFR 47, Nanotron Technologies GmbH hereby requests confidentiality of all block diagrams, circuit description, circuit diagrams, parts list, operational description attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which Nanotron Technologies considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Nanotron considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Dr. F. Schlichting Director Application Engineering Nanotron Technologies GmbH Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Telefon +49 30 399 954 - 0 Fax +49 30 399 954 - 188 E-Mail [email protected] Web www.nanotron.com Geschäftsführer Dr. Jens N. Albers Zbigniew Ianelli Bankverbindung Deutsche Bank BLZ 10070000 Konto 703 777 3 Amtsgericht Berlin-Charlottenburg Abteilung B – Register Nr. 42 324 USt-IdNr. DE 136 768 686 Nanotron Technologies GmbH Alt-Moabit 60 10555 Berlin Germany

11.04.2008 To whom it may concern: We, the undersigned, hereby authorize Eurofins ETS Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization CMC-TC Sensor Device including the signing of all documents relating to these matters. Any and all acts carried out by Eurofins ETS Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Dr. F. Schlichting Director Application Engineering Nanotron Technologies GmbH Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Telefon +49 30 399 954 - 0 Fax +49 30 399 954 - 188 E-Mail [email protected] Web www.nanotron.com Geschäftsführer Dr. Jens N. Albers Zbigniew Ianelli Bankverbindung Deutsche Bank BLZ 10070000 Konto 703 777 3 Amtsgericht Berlin-Charlottenburg Abteilung B – Register Nr. 42 324 USt-IdNr. DE 136 768 686 Nanotron Technologies GmbH Alt-Moabit 60 10555 Berlin Germany

Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 8 Annex A. Pictures Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 8 Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 8

Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 8 Annex A. Pictures Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 8 Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 8

Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 8 Annex A. Pictures Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 8 Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 8

Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 8 Annex A. Pictures Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 8 Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 8

Test Report No.: G0M20801-1630-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 8 Annex A. Pictures Test Report No.: G0M20801-1630-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 8 Test Report No.: G0M20801-1630-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 8

FCC Required Exhibit 4 CMC-TC SD Label Location (LabelLoc) Version 1.01 NA-08-0000-0038-1.00 Document Information CMC-TC SD Label Location (LabelLoc) Page ii NA-08-0000-0038-1.00 © 2008 Nanotron Technologies GmbH. Document Information Document Title: CMC-TC SD Label Location (LabelLoc) Document Version: 1.00 Published (yyyy-mm-dd): 2008-04-15 Current Printing:2008-4-15, 4:32 pm Document ID: NA-08-0000-0038-1.00 Document Status: Released Disclaimer Nanotron Technologies GmbH believes the information contained herein is correct and accurate at the time of release. Nanotron Technologies GmbH reserves the right to make changes without further notice to the product to improve reliability, function or design. Nanotron Technologies GmbH does not assume any liability or responsibility arising out of this product, as well as any application or circuits described herein, neither does it convey any license under its patent rights. As far as possible, significant changes to product specifications and functionality will be provided in product specific Errata sheets, or in new versions of this document. Customers are encouraged to check the Nanotron website for the most recent updates on products. Trademarks nanoNET © is a registered trademark of Nanotron Technologies GmbH. All other trademarks, registered trademarks, and product names are the sole property of their respective owners. This document and the information contained herein is the subject of copyright and intellectual property rights under international convention. All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical or optical, in whole or in part, without the prior written permission of Nanotron Technologies GmbH. Copyright © 2008 Nanotron Technologies GmbH. Life Support Policy These products are not designed for use in life support appli- ances, devices, or systems where malfunction of these prod- ucts can reasonably be expected to result in personal injury. Nanotron Technologies GmbH customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Nanotron Technologies GmbH for any damages resulting from such improper use or sale. Electromagnetic Interference / Compatibility Nearly every electronic device is susceptible to electromag- netic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. To avoid electromagnetic interference and/or compatibility conflicts, do not use this device in any facility where posted notices instruct you to do so. In aircraft, use of any radio fre- quency devices must be in accordance with applicable regula- tions. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. With medical devices, maintain a minimum separation of 15 cm (6 inches) between pacemakers and wireless devices and some wireless radios may interfere with some hearing aids. If other personal medical devices are being used in the vicinity of wireless devices, ensure that the device has been ade- quately shielded from RF energy. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CAUTION! Electrostatic Sensitive Device. Pre- caution should be used when handling the device in order to prevent permanent damage. FCC User Information Statement according to FCC part 15.19: This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. RF exposure mobil: The internal / external antennas used for this mobile transmit- ter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in con- junction with any other antenna or transmitter." Statement according to FCC part 15.105: This equipment has been tested and found to comply with the limits for a Class A and Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation and against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions as provided in the user manual, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. Operation of this equipment in a resi- dential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to connected. •Consult the dealer or an experienced technician for help. Label Location CMC-TC SD Label Location (LabelLoc) © 2008 Nanotron Technologies GmbH.NA-08-0000-0038-1.00 Page 1 1 1 Label Location Figure 1: Label Location Label Location CMC-TC SD Label Location (LabelLoc) Page 2 NA-08-0000-0038-1.00© 2008 Nanotron Technologies GmbH. 1 Intentionally Left Blank Revision History CMC-TC Wireless I/O-Unit Label Location (LabelLoc) © 2008 Nanotron Technolo…

Text truncated - open the document above for the full version.

FCC Required Exhibit 3 CMC-TC SD Label Sample (LabelSmpl) Version 1.01 NA-08-0000-0039-1.01 Document Information CMC-TC SD Label Sample (LabelSmpl) Page ii NA-08-0000-0039-1.01 © 2008 Nanotron Technologies GmbH. Document Information Document Title: CMC-TC SD Label Sample (LabelSmpl) Document Version: 1.01 Published (yyyy-mm-dd): 2008-04-17 Current Printing:2008-4-17, 2:06 pm Document ID: NA-08-0000-0039-1.01 Document Status: Released Disclaimer Nanotron Technologies GmbH believes the information contained herein is correct and accurate at the time of release. Nanotron Technologies GmbH reserves the right to make changes without further notice to the product to improve reliability, function or design. Nanotron Technologies GmbH does not assume any liability or responsibility arising out of this product, as well as any application or circuits described herein, neither does it convey any license under its patent rights. As far as possible, significant changes to product specifications and functionality will be provided in product specific Errata sheets, or in new versions of this document. Customers are encouraged to check the Nanotron website for the most recent updates on products. Trademarks nanoNET © is a registered trademark of Nanotron Technologies GmbH. All other trademarks, registered trademarks, and product names are the sole property of their respective owners. This document and the information contained herein is the subject of copyright and intellectual property rights under international convention. All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical or optical, in whole or in part, without the prior written permission of Nanotron Technologies GmbH. Copyright © 2008 Nanotron Technologies GmbH. Life Support Policy These products are not designed for use in life support appli- ances, devices, or systems where malfunction of these prod- ucts can reasonably be expected to result in personal injury. Nanotron Technologies GmbH customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Nanotron Technologies GmbH for any damages resulting from such improper use or sale. Electromagnetic Interference / Compatibility Nearly every electronic device is susceptible to electromag- netic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. To avoid electromagnetic interference and/or compatibility conflicts, do not use this device in any facility where posted notices instruct you to do so. In aircraft, use of any radio fre- quency devices must be in accordance with applicable regula- tions. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. With medical devices, maintain a minimum separation of 15 cm (6 inches) between pacemakers and wireless devices and some wireless radios may interfere with some hearing aids. If other personal medical devices are being used in the vicinity of wireless devices, ensure that the device has been ade- quately shielded from RF energy. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CAUTION! Electrostatic Sensitive Device. Pre- caution should be used when handling the device in order to prevent permanent damage. FCC User Information Statement according to FCC part 15.19: This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. RF exposure mobil: The internal / external antennas used for this mobile transmit- ter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in con- junction with any other antenna or transmitter." Statement according to FCC part 15.105: This equipment has been tested and found to comply with the limits for a Class A and Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation and against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions as provided in the user manual, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. Operation of this equipment in a resi- dential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to connected. •Consult the dealer or an experienced technician for help. Label Sample CMC-TC SD Label Sample (LabelSmpl) © 2008 Nanotron Technologies GmbH.NA-08-0000-0039-1.01 Page 1 1 1 Label Sample Figure 1: Label Sample Font Type: Arial Font Size: 1.6 mm Consecutively numbered with Serial Number M 10:1 FCC ID: Label Sample CMC-TC SD Label Sample (LabelSmpl) Page 2 NA-08-0000-0039-1.01© 2008 Nanotron Technologies GmbH. 1 Intentionally Left Blank Revision Hist…

Text truncated - open the document above for the full version.

Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 8 Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 8 Test Report No.: G0M20801-1629-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 8

Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 8 Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 8 Test Report No.: G0M20801-1628-T-45 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 8

Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 8 Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 8 Test Report No: G0M20801-1632-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 8

Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 8 Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 8 Test Report No: G0M20801-1631-C-1 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 8