SJ8-UBR223WIRELESS MONITOR

Portable Digital Wireless Baby Monitor UBR223 User’s Guide MPORTANT SAFETY PRECAUTIONS This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: xThe camera is NOT weatherproof. It is an indoor camera xTo avoid any risk of electric shock from lightning, avoid handling any electronic devices (except battery-powered ones) during an electrical storm. xUse only the power cord indicated in this manual. xNever tug or pull on any power cord; be sure to leave some slack in the cord when placing your equipment, and always use the plug to unplug cord from the wall outlet. xNever leave power cords where they can become crushed, cut, or frayed; when running power cords, avoid letting them rub against any sharp edges or lie across any high traffic areas where people might trip over them. xDo not use the device if the adapter cords or plugs have been damaged, the monitor has been exposed to liquids, or the monitor/ camera has been dropped or is damaged. 3 WARNING TO PARENTS AND OTHER USERS Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medical or parental supervision. Always be sure that both the transmitter and receiver are working properly, and are within range of each other. xSTRANGULATION HAZARD. Keep the adapter cords out of the reach of children. xWARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy and is not intended for use by any children under the age of 13. If you are between the ages of 13 and 18, review these terms, conditions and safety warnings with your parents or guardian to make sure that you and your parent or guardian understand these terms, conditions, and safety warnings. xAllow for proper ventilation when units are in use. Do not cover the camera or receiver with any object such as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. SAVE THESE INSTRUCTIONS! FOR BEST RESULTS To avoid damage to your equipment, follow these simple precautions: xDo not drop, puncture or disassemble any part of the equipment. There are no user-serviceable parts inside. xDo not expose the equipment to high temperatures, and avoid leaving the equipment in direct sunlight for more than a few minutes. Heat can damage the case or electrical parts. xDo not place heavy items on top of the equipment or expose the equipment to heavy pressure. xRemove the power adapter during long periods between usages. xClean only with a dry cloth. Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions. . CONTENTS OVERVIEW .......................................................5 FEATURES ............................................................................. 5 Camera ......................................................................................... 5 Monitor ........................................................................................ 6 USING THE MANUAL ........................................................ 6 GETTING STARTED..........................................8 WHAT’S INCLUDED ........................................................... 8 MONITOR INSTALLATION ............................................... 8 CAMERA INSTALLATION ................................................. 9 Placement Considerations.................................................... 9 Wall Mount ................................................................................. 9 Suction Mount.........................................................................10 Clip-Mount................................................................................10 Connect Power........................................................................10 BASIC OPERATION ....................................... 11 WIRELESS CAMERA ......................................................... 11 WIRELESS MONITOR ....................................................... 13 LCD DISPLAY ..................................................................... 15 USING THE UBR223......................................................... 17 Viewing Modes .......................................................................17 Common Operations ............................................................18 SYSTEM MENU DESCRIPTIONS ................... 19 SYSTEM ............................................................................... 19 Date/Time .................................................................................20 Brightness .................................................................................21 Factory Reset ...........................................................................21 Language ..................................................................................22 Temperature Display Unit ...................................................22 Temperature Alert Range....................................................23 ALERT................................................................................... 24 VOX....................................................................................... 25 CAMERA .............................................................................. 26 Pair...............................................................................................26 On/Off.........................................................................................27 POW…

Text truncated - open the document above for the full version.

1 Guide d’utilisation du V\VWqPHSRUWDWLIVDQVÀOSRXU surveillance de bébé UBR223 2 S . MESURES DE SÉCURITÉ IMPORTANTES Ce guide contient des renseignements importants se rapportant au fonctionnement de cet appareil. Si vous installez cet appareil pour d’autres personnes, vous devez laisser ce guide ou une copie à l’utilisateur final . Lorsque vous utilisez cet appareil, assurez-vous de suivre les mesures de sécurité de base ci-dessous à la lettre afin de réduire les risques d’incendie, d’électrocution et de blessures corporelles : xLa caméra n’est PAS à l’épreuve des intempéries. Celle-ci est une caméra d’intérieur. xPour éviter les risques d’électrocution provoqués par les éclairs, évitez de manipuler les appareils électroniques (à l’exception de ceux qui sont alimentés par piles) pendant un orage. xN’utilisez que le cordon d’alimentation indiqué dans ce guide. xNe tirez pas sur un cordon électrique; assurez-vous de laisser les cordons un peu lâches lorsque vous installez vos appareils et utilisez toujours la fiche pour les brancher et les débrancher de la prise murale. xNe laissez jamais traîner les cordons d’alimentation là où on peut les écraser, les couper ou les écorcher; lorsque vous acheminez des cordons électriques, évitez de les laisser se frotter contre les rebords coupants ou dans les endroits où la circulation est dense et où les gens pourraient trébucher dessus. xN’utilisez pas l’appareil si les cordons de l’adaptateur ou les fiches sont endommagés, si le moniteur a été exposé aux liquides, ou si le moniteur ou la caméra a été échappé ou est endommagée. 3 AVERTISSEMENT AUX PARENTS ET AUTRES UTILISATEURS Si vous ne suivez pas ces avertissements et les instructions d’assemblage, vous risquez de subir de graves blessures corporelles, même mortelles. Cet appareil n’a pas été conçu pour être utilisé en tant que moniteur médical ni comme solution de rechange pour toute supervision médicale ou parentale. Assurez-vous que le transmetteur et le récepteur sont en excellent état de fonctionnement et qu’ils sont dans la portée requise pour communiquer correctement l’un avec l’autre. xRISQUE D’ÉTRANGLEMENT : Tenez toujours tous les cordons des adaptateurs secteur hors de la portée des enfants. xAVERTISSEMENT : TENIR CET APPAREIL HORS DE LA PORTÉE DES ENFANTS. Cet appareil n’est pas un jouet et n’a pas été conçu pour être manipulé ni utilisé par un enfant de moins de 13 ans. Si vous êtes âgé(e) de 13 à 18 ans, révisez ces conditions et modalités et les avertissements relatifs à la sécurité avec vos parents ou gardiens afin de vous assurer que vous et eux comprenez bien ces conditions, modalités et avertissements relatifs à la sécurité. xAllouez une aération adéquate lorsque vous utilisez cet appareil. Ne recouvrez pas la caméra ni le récepteur avec des objets tels que des couvertures. Ne l’installez pas dans un tiroir ni dans un endroit pouvant étouffer le son ou interférer avec la circulation normale de l’air . CONSERVEZ CES INSTRUCTIONS! POUR DE MEILLEURS RÉSULTATS Pour éviter d’endommager votre appareil, suivez ces quelques mesures préventives: xNe pas échapper, percer ni démonter l’une des pièces de l’appareil. Celui-ci ne contient aucune pièce pouvant être réparée par l’utilisateur. xNe pas exposer l’appareil à des sources de température élevées et éviter de le laisser à la lumière directe du xsoleil pendant plus de quelques minutes. La chaleur peut endommager le boîtier ou les pièces électriques de l’appareil. xNe déposez pas d’objet lourd sur l’appareil et ne mettez pas de pression indue sur celui-ci. xRetirez l’adaptateur secteur pendant les longues périodes d’inutilisation. xNe nettoyez l’appareil qu’avec un sec. Vous risquez d’annuler votre garantie si vous ne suivez pas les directives de ce guide d’utilisation. Uniden n’assume aucune responsabilité pour les dommages faits à la propriété ou les blessures corporelles causées par la manipulation inadéquate ou tout défaut de se conformer à ces instructions de sécurité. 4 CONTENU SURVOL ...........................................................5 CARACTÉRISTIQUES.......................................................... 5 Caméra ......................................................................................... 5 Moniteur...................................................................................... 6 UTILISATION DU GUIDE D’UTILISATION.................... 6 CE QUI EST INCLUS DANS L’EMBALLAGE.................. 7 INSTALLATION du moniteur.......................................... 7 Directives générales relatives à l’emplacement d’installation....................................................................... 8 Installation murale ................................................................... 9 Support à ventouse ................................................................. 9 Pince de fixation ....................................................................... 9 Brancher l’alimentation .......................................................10 FONCTIONNEMENT DE BASE ...................... 11 CAMÉRA SANS FIL ........................................................... 11 MONITEUR SANS FIL....................................................... 13 AFFICHAGE ACL ............................................................... 15 UTILISATION DU SYSTÈME UBR223 .......................... 17 Modes de visionnement..........................................17 Fonctionnement standard..................................................18 DESCRIPTION DES MENUS DU SYSTÈME ... 19 SYSTÈME ............................................................................. 19 Date et heure ...........................................................................20 Luminosité ................................................................................21 Réinitialisation par défaut ...................................................21 Langage .....................................................................................22 …

Text truncated - open the document above for the full version.

RDI Technology (Shenzhen) Co., Ltd Date: May 06, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: SJ8-UBR223 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description SCH.pdf BlockDiagram.pdf CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, RDI Technology (Shenzhen) Co., Ltd ................................................... Signature Tony. zhou / Manager ................................................... Typed name and Title

RDI Technology (Shenzhen) Co., Ltd FCC ID: SJ8-UBR223 POWER OF ATTORNEY Date: May 06, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on May 05, 2014. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, RDI Technology (Shenzhen) Co., Ltd, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, RDI Technology (Shenzhen) Co., Ltd ................................................................................. Signature Tony. zhou / Manager ................................................................................. Typed name and Title

Reference No.: WTF13S0403004E Page 52 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18 Photographs - Constructional Details 18.1 External View Reference No.: WTF13S0403004E Page 53 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTF13S0403004E Page 54 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF13S0403004E Page 60 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC Label Location for model: UBR223 The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. =End of report= FCC ID: SJ8-UBR223

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC Label FCC Label Sample for model: UBR223 FCC ID: SJ8-UBR223 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Reference No.: WTF13S0403004E Page 55 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18.2 EUT - Internal View Reference No.: WTF13S0403004E Page 56 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn RF module ANT Reference No.: WTF13S0403004E Page 57 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTF13S0403004E Page 58 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTF13S0403004E Page 1 of 60 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID : SJ8-UBR223 Applicant : RDI Technology (Shenzhen) Co., Ltd. Address : Building C1 Xintang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, China Manufacturer : The same as above Address : The same as above Equipment Under Test (EUT) : Product Name : Wireless Monitor Model No. : UBR223 Standards : FCC CFR47 Part 15 Section 15.247:2010 Date of Test : April 22~25, 2013 Date of Issue : May 06, 2013 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTF13S0403004E Page 2 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Spurious Emissions 15.205(a) 15.209 15.247(d) PASS Duty Cycle 15.35 PASS Band edge 15.247(d) 15.205(a) PASS Conduct Emission 15.207 PASS 20dB Bandwidth 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separation 15.247(a)(1) PASS Number of Hopping Frequency 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTF13S0403004E Page 3 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................................... 2 3 CONTENTS ............................................................................................................................................................. 3 4 GENERAL INFORMATION .................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 5 4.2 DETAILS OF E.U.T. .......................................................................................................................................... 5 4.3 TEST FACILITY ................................................................................................................................................. 5 4.4 TEST LOCATION ............................................................................................................................................... 5 4.5 TEST MODE ..................................................................................................................................................... 5 4.6 CHANNEL LIST ................................................................................................................................................. 6 5 EQUIPMENT USED DURING TEST ................................................................................................................... 7 5.1 EQUIPMENTS LIST ........................................................................................................................................... 7 5.2 MEASUREMENT UNCERTAINTY ........................................................................................................................ 8 5.3 TEST EQUIPMENT CALIBRATION ...................................................................................................................... 8 6 CONDUCTED EMISSION .................................................................................................................................... 9 6.1 E.U.T. OPERATION .......................................................................................................................................... 9 6.2 EUT SETUP ..................................................................................................................................................... 9 6.3 CONDUCTED EMISSION TEST RESULT .......................................................................................................... 10 7 RADIATED SPURIOUS EMISSIONS ............................................................................................................... 12 7.1 EUT OPERATION : ......................................................................................................................................... 12 7.2 TEST SETUP .................................................................................................................................................. 13 7.3 SPECTRUM ANALYZER SETUP ....................................................................................................................... 14 7.4 TEST PROCEDURE ......................................................................................................................................... 15 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 15 7.6 SUMMARY OF TEST RESULTS ....................................................................................................................... 16 8 DUTY CYCLE ......…

Text truncated - open the document above for the full version.

Reference No.: WTF13S0403004E Page 48 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 17 Photographs – Test Setup 17.1 Photograph – Radiation Spurious Emission Test Setup Below 30MHz Reference No.: WTF13S0403004E Page 49 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 30MHz-1GHz Reference No.: WTF13S0403004E Page 50 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Above 1GHz Reference No.: WTF13S0403004E Page 51 of 60 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 17.2 Photograph – Conducted Emission Test Setup