SJ8CA330WIRELESS CAMERA

JASCO INDOOR 45233 WIRELESS CAMERA Congratulations on your purchase of the JASCO™ Wireless Camera (45233 Wireless Camera) All JASCO™ Wireless Cameras includes high quality video and audio components. When combined with a JASCO™ Wireless Video Monitor/Receiver , you have an ideal combination for watching the baby, monitoring the porch, pets, yard or the pool. It is also suited to many small business applications. FEATURES /// 1.900MHz wireless technology. 2.Plug’n’play installation. 3.High resolution color video camera. 4.Built-in microphone transmits sound from camera to monitor. 5.High quality audio and video components for long life. 6.IR LEDs for night vision. 7.Adjustable antenna on camera for better signal transition. 8.Rechargeable LI polymer Battery(not include, sold separately) operation,850MAH battery can last for about 5 hours. SYSTEM CONTENTS /// Identify all parts before proceeding with installation. THINGS TO CONSIDER BEFORE INSTALLATION /// For best performance, follow these simple guidelines: 1.Camera(s) should be installed between 8 and 13 feet above the area to be monitored 2.The Camera should be aimed accordingly to optimize viewing area 3.For best transmission, avoid installations where there are thick walls or major obstructions between the Camera and Monitor INSTALLING THE CAMERA (TRANSMITTER) /// 1.Unpack the Camera. 2.Place the Camera in an optimal position 3.To use the 9V camera power adapter, connect power jack to the input on the base of the Camera. Make sure the Camera is positioned no more than 5 1/2 feet from an AC power outlet 4.Desktop mounting Just place the camera to where you want to, and make sure the camera is within the RF range. As shown below: 5.Wall mounting 6.The Camera (Transmitter) installation is now complete. NIGHTVISION /// The camera includes IR LEDs, which allows viewing up to 5 feet in the dark when used with the adapter. To turn on the IR LEDs, there is a small photoconductive resistor on the front of the Camera, which enable the camera automatically turn on the IR LEDs on low light conditions. MULTI-CAMERA OPERATION /// The JASCO™ Wireless Camera System is designed to work with up to (2) Cameras. Additional Cameras are sold separately. IMPORTANT: When using more than one Camera, make sure each Camera is assigned to a specific channel by adjusting the corresponding slide switch left or right. The slide switch is located at the underside of the camera housing. TROUBLE SHOOTING If you are having trouble operating this product, please consult the guide below: SYMPTOM REMEDIES No camera picture 1. Check all connectors. Make sure camera(s) and receiver are switched ON. 2. Ensure camera(s) and receiver are set to correct channel(s). 3. Make sure camera is within range of receiver. Blank monitor 1. Make sure receiver is switched ON. 2. If using AC adapter, make sure it is plugged in. 3. If using batteries, make sure they are installed correctly, or try recharging(replacing) them. Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, receiver or both to improve the reception quality. 3. If a camera is positioned close to the receiver, point antenna away from the receiver. 4. Reposition other nearby equipment transmitting on the 900MHz frequency. Audio problems 1. Ensure the volume is turned up sufficiently on the Monitor (or TV). 2. Make sure the sound is within the microphone range. 3. If the unit emits a loud wailing sound (feeds back), try moving the camera away from the receiver or angle the receiver differently. SPECIFICATIONS Camera TV System PAL or NTSC Integrated Lens 5.6mm, F2.0 fixed focus Resolution 360 horizontal TV Lines Signal/Noise Ratio 46 dB High-Speed Electronic Shutter 1/60 - 1/15,000 sec Image Sensor 1/4” CMOS Min. Illumination 0.1 lux Current Consumption 80~140mA Overall Size 2.35”W x2.74Hx3.16D Frequency Range 910 - 920 MHz Modulation FM Video Signal/Noise Ratio 46db Audio Signal/Noise Ratio 45db Channel Selection Electronic tuning Case Finish UV resistant ABS plastic APPROVALS /// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. CE: Need to test FCC: Need to test WARRANTY /// This product has a one year manufacturer’s warranty which covers parts and labor only. In the unlikely event that you encounter a technical or quality issue, please contact JASCO at *********** JASCO will replace defective units within the warranty period. DRILLING TEMPRATE If you decide to mount the camera on a wall, use this page as a guide for drilling the required holes

EUT - Front View EUT - Back View

FCC ID Label Sample for Model: CA330, 45233T, 45235T FCC ID: SJ8CA330 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/proposed FCC Mark Location FCC ID: SJ8CA330 .

PCB1 - Front View PCB1 - Back View PCB2 - Front View PCB2 - Back View PCB3 - Front View PCB3 - Back View PCB4 - Front View PCB4 - Back View

CA330 Wireless Camera Nov, 29th, 2007 Architecture CA330 Wireless camera includes high quality video and audio components. When combined with a RDI Wireless Video Monitor/Receiver, you have an ideal combination for watching the baby, monitoring the porch, pets, yard or the pool. It is also suite to many small business applications. CA330 wireless camera hardware architecture is show in Block diagram 1> The camera is base on a single-chip COMS camera sensor (OV7910) provide a high quality video, built-in an audio microphone, auto turn on/off IR LED for night vision and audio alert when audio volume over preset level. 2> The 900MHz TX module is assigned to transmit the video and audio signal. 3> MCU (Micro control unit) scans the switch to select the RF module channel and audio detected control. 4> Energy is supplied by 9V camera adapter. 5> 15mm wire antenna is fixed on the PCB permanently.

SHEET: 1 OF 1 RDI China APPROVED:PCB NO:DRAWN:SCALE:CHECKED: DATED:DATED: REV: DATED: SIZE: A3 1:1 MODEL NO: REV: COMPANY:TITLE: CA330 TX (900MHz/PLL) JOSH 2007-08-07 1.11.1 IR BOARD ADAPTER CMOS RDI508 RDI508 1 P50 2 P67 3 P66 4 VDD 5 P65/OSCI 6 P64/OSCO 7 P63/RST/VPP 8 P62 9 P61 10 P60 11 GND 12 P53 13 P52 14 P51 U1 EM78P153 12 34 TX2 SW-RDI435 1 IN 2 GND 3 OUT U2 LM7805 1 9V 2 1 C1 100uF/16V 2 1 C2 100uF/16V 1 2 D1 C3104 C4104 12 R1 DNI 12 R2 10K 1 2 R3 000 12 R4 DNI 1 G1 1 5V 1 VIDEO 1 AUDIO 1 G3 1 8V 1 G2 12 R5 10K 12 R6 10K 12 R7 10K C53.3pF C63.3pF C73.3pF 1 AF 2 GND 3 AUDIO 4 5V 5 CLK 6 DATA 7 LE 8 VIDEO TX1 900M-PLL 12 R8 10K C8 104 12 R9 1K 12 R10 DNI +5V VIDEO AUDIO 8V 8V AUDIO +5V VIDEO +5V +5V +5V

FCC TEST REPORT Page 1 of 31 FCC ID : SJ8CA330 Applicant : RDI Technology (Shenzhen) Co., Ltd. Building C1 Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, P.R.C. Equipment Under Test (EUT) : Product description : Wireless Camera Model No. : CA330, 45233T, 45235T Standards : FCC 15 Paragraph 15.249 Date of Test : Dec.6, 2007 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8CA330 Page 2 of 31 2 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 CONTENTS ...............................................................................................................................................................2 3 TEST SUMMARY .....................................................................................................................................................4 4 GENERAL INFORMATION ...................................................................................................................................5 4.1 CLIENT INFORMATION..........................................................................................................................................5 4.2 GENERAL DESCRIPTION OF E.U.T. .......................................................................................................................5 4.3 DETAILS OF E.U.T................................................................................................................................................5 4.4 DESCRIPTION OF SUPPORT UNITS.........................................................................................................................5 4.5 STANDARDS APPLICABLE FOR TESTING...............................................................................................................5 4.6 TEST FACILITY.....................................................................................................................................................6 4.7 TEST LOCATION...................................................................................................................................................6 5 EQUIPMENT USED DURING TEST .....................................................................................................................7 6 CONDUCTED EMISSION TEST............................................................................................................................8 6.1 TEST EQUIPMENT.................................................................................................................................................8 6.2 TEST PROCEDURE.................................................................................................................................................8 6.3 CONDUCTED TEST SETUP.....................................................................................................................................9 6.4 EUT OPERATING CONDITION...............................................................................................................................9 6.5 CONDUCTED EMISSION LIMITS...........................................................................................................................10 6.6 CONDUCTED EMISSION TEST RESULT................................................................................................................11 6.7 MEASUREMENT DATA........................................................................................................................................12 7 RADIATION EMISSION TEST ............................................................................................................................13 7.1 TEST EQUIPMENT...............................................................................................................................................13 7.2 MEASUREMENT UNCERTAINTY..........................................................................................................................13 7.3 TEST PROCEDURE...............................................................................................................................................13 7.4 RADIATED TEST SETUP......................................................................................................................................14 7.5 SPECTRUM ANALYZER SETUP............................................................................................................................14 7.6 CORRECTED AMPLITUDE & MARGIN CALCULATION..........................................................................................15 7.7 SUMMARY OF TEST RESULTS.............................................................................................................................15 7.8 EUT OPERATING CONDITION.............................................................................................................................16 7.9 RADIATED EMISSIONS LIMIT..............................................................................................................................16 7.10 RADIATED EMISSIONS TEST RESULT..................................................................................................................17 8 BAND EDGE............................................................................................................................................................22 8.1 TEST EQUIPMENT...............................................................................................................................................22 8.2 TEST PROCEDURE...................................................................................................…

Text truncated - open the document above for the full version.

Conducted Emission Test View Radiation Emission Test View For 30MHz-1000MHz Radiation Emission Test View For 1GHz-25GHz