SJ8M240WIRELESS LCD MONITOR

Thanks for your purchasing of the 45236 Wireless Color Surveillance System. The 45236 kit is a combined wireless color camera & video monitor/receiver. An ideal combination for watching the baby, monitoring the porch, pets, yard or the pool. It is also suited to many small business applications. Features/// *900MHz wireless technology *2.5-inch LCD for good picture display *Plug and play installation * Sound trigger function *Supports up to 2 cameras *Monitor can work with 3 modes: Scan, Auto & Manual *Adjustable cycle time between cameras in Auto mode *Camera can be wall or table mounting and the monitor can be tabletop mounting *The LCD Brightness, Color, Contrast, Alarm volume & Audio volume are all adjustable System Contents /// Identify all parts before proceeding with installation. Things to Consider Before Installation/// For best performance, follow these simple guidelines: *The camera should be aimed accordingly to optimize viewing area. *For best transmission, avoid installations where there are thick walls or major obstructions between the camera & LCD monitor. Installing the Camera(Transmitter)/// 1.Unpack the Camera. 2.Decide whether the Camera will be wall-mounted or sit on a desk/tabletop. If wall mounting, use drilling template on the back cover of these instructions. If using the tabletop base, attach the camera to the stand as shown. The Camera can be adjusted for either mounting scenario by rotating the Camera head to the required position. 3.To use the camera power adapter, connect power jack to the rear of the tabletop base. Make sure the Camera is within reach of an AC power outlet. 4.Select the camera operating channel on the slide switch by moving slide switches to 1, 2channels’ position. Switch is preset to channel 1. 5. The Camera (Transmitter) installation is now complete. Installing the LCD Monitor/// Main Operation 1.Plug AC power supplier of the LCD monitor into the power jack in the rear of the LCD monitor base. 2.Turn on the LCD monitor by pressing the top POWER button. 3.The LCD monitor can be set on the tabletop. Optimizing the Wireless Camera System/// The 900MHz signals pass easily through your home's interior walls, but the signal may be reflected by power wires or plumbing inside the wall. Multi-Camera Operation/// The Wireless Surveillance System is designed to work with up to two cameras. Additional cameras and rechargeable lithium battery packs for camera are sold separately. Important When using more than one camera, make sure each camera is assigned to a specific channel by adjusting the corresponding slide switch. Accordingly the DIP switch located on the back of the LCD monitor should be adjusted to reflect the channel in use. The sensitivity of sound trigger can be adjusted by turning the knob “sensitivity adjust tuner. Operating Modes/// The wireless system can be set to operate in one of three modes: Scan, Auto or Manual. The desired operating mode can be selected using the buttons on the front panel of the LCD monitor. Scan Pressing the Scan button places the system in Scan mode. The LCD monitor screen blanks into a standby mode while the system continuously scans the active cameras. If a camera detects motion, the LCD monitor displays the camera picture and the beeper will sound. Several minutes after the last detection, the screen returns to standby mode while the LCD monitor resumes scanning. Pressing the Manual or Auto button will wake up the LCD. Auto Pressing the Auto button places the system in Auto mode. In this mode, the system automatically circulate through all active cameras. When a camera detects sound is too high(you can set the compared sound by the sensitivity knob), the LCD monitor will display the picture from the camera for a few seconds, and the beeper will sound. To avoid searching channels that do not have cameras/transmitters assigned to them, set the DIP switches(inside the battery compartment) for those corresponding channels to the off position. The dwell time(time taken to switch between cameras) is preset to 4 seconds and can be adjusted between 2 - 30 seconds. To adjust the dwell time, press both the Auto and Manual buttons simultaneously. Each flash of the LED in-creases the dwell time by one second. Manual To select a specific camera to LCD monitor, press the Manual button. The LCD monitor will switch to a different camera each time the Manual button is pressed. When the camera detects loud sound, the beeper will sound. To avoid searching channels that do not have cameras assigned to them, set the DIP switches (inside the battery compartment) for those corresponding channels to the Off position. Monitor Functions/// Power Press to turn the monitor on/off. Alarm Volume The Alarm Volume of the LCD monitor can be adjusted by tuning the Alarm volume tuner on the top of the LCD monitor. Vo l u m e You may adjust the Sound Level by pressing “+” or “-” on the Volume button. This operation is before pressing the “Menu” button. If you have pressed the “Menu” button, please consult the bellow instructions. Menu By pressing the Menu button, you can adjust the brightness, color and contrast 1. Pressing the “menu” button once the first LED will be lighted and become blue, and then you can adjust the brightness by pressing “+” or “-” on the Volume/Adjust Button. 2. Pressing the “menu” button twice the middle LED will be lighted and become blue, and then you can adjust the color by pressing “+” or “-” on the Volume/Adjust Button. 3. Pressing the “menu” button three times the third LED will be lighted and become blue, and then you can adjust the contrast by pressing “+” or “-” on the Volume/Adjust Button. 4. Pressing the “menu” button four times, the blue lighted LED will be went out, now you can adjust the volume by pressing the “+” or “-” on the Volume/Adjust Button.If not any operating within 30 seconds it will back to volume adjust mode automatically. Trouble Shooting/// If you are having trouble operating this product, …

Text truncated - open the document above for the full version.

EUT - Front View EUT - Back View

FCC ID Label Sample for Model: M240, 45236R FCC ID: SJ8M240 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Top View/ proposed FCC Mark Location FCC ID:SJ8M240 This device complies with Part 15 of the FCC Rules.Operation is subject to the following

PCB1 - Front View PCB1 - Back View PCB2 - Front View PCB2 - Back View PCB3 - Front View PCB3 - Back View

M240 Wireless Horizontal Lcd 27 th Nov, 2007 Architecture: M240 Wireless Horizontal Lcd includes received high quality video and audio components.The Wireless Horizontal Lcd is a 900Mhz wireless monitor compatible with any RDI or compatible wireless camera, an ideal product for monitoring the porch, watching the yard, pool, pets or the baby. It is also suited to many small business applications. M240 Wireless Horizontal Lcd hardware architecture is show in Block diagram. 1. The 900Mhz RX module is assigned to receive the CVBS video and audio signal. And output trigger signal to MCU for judge.Then drive the buzzer to alarm. 2. MCU (Micro control unit) AT8P59 operates periodically.Including control Manual, Auto button ,control dip switcher to select RF module channel , control LED display RF module channel and control AV output etc. 3. The CVBS (Color Video Blanking and Synchronizing ) signal through Y/C divider into TVP5150 RGB Decode/Driver then decode the CVBS signal and generate timing to drive and synchronize the TFT LCD Panel for show real picture.The color,contrast and brightness of panel were adjusted by EM78P156ELM.

FCC TEST REPORT Page 1 of 19 FCC ID NO. : SJ8M240 Applicant : RDI Technology (Shenzhen) Co., Ltd. Building C1 Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, P.R.C. Equipment Under Test (EUT) : Product Name : Wireless LCD Monitor Model No. : M240, 45236R Standards : FCC Part 15 SUBPART B Date of Test : Dec.6, 2007 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8M240 Page 2 of 19 2 Test Summary Test Test RequirementTest Method Class / Severity Result Radiated Emission (30MHz to 5GHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8M240 Page 3 of 19 3 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 TEST SUMMARY....................................................................................................................................................2 3 CONTENTS ..............................................................................................................................................................3 4 GENERAL INFORMATION..................................................................................................................................4 4.1 CLIENT INFORMATION............................................................................................................................................4 4.2 GENERAL DESCRIPTION OF E.U.T...........................................................................................................................4 4.3 DETAILS OF E.U.T. .................................................................................................................................................4 4.4 DESCRIPTION OF SUPPORT UNITS...........................................................................................................................4 4.5 TEST FACILITY........................................................................................................................................................5 4.6 TEST LOCATION......................................................................................................................................................5 5 EQUIPMENT USED DURING TEST ...................................................................................................................6 5.1 CONDUCTION EMISSIONS, 0.15MHZ TO 30MHZ.....................................................................................................7 5.1.1 E.U.T. Operation..........................................................................................................................................7 5.1.2 Measurement Result .....................................................................................................................................8 5.1.3 Measurement Data .......................................................................................................................................9 5.2 RADIATED EMISSIONS, 30MHZ TO 5GHZ.............................................................................................................10 5.2.1 E.U.T. Operation........................................................................................................................................10 5.2.2 EUT Setup ..................................................................................................................................................10 5.2.3 Spectrum Analyzer Setup............................................................................................................................11 5.2.4 Test procedure............................................................................................................................................11 5.2.5 Summary of Test Results ............................................................................................................................11 5.2.6 Radiatied Emissions Test Data ..................................................................................................................12 5.3 PHOTOGRAPHS - TEST SETUP................................................................................................................................13 5.3.1 Conduction Emissions Test Setup ..............................................................................................................13 5.3.2 Radiated Emissions Test Setup For 30MHz-1000MHz ..............................................................................14 5.3.3 Radiated Emissions Test Setup For 1GHz-5GHz.......................................................................................14 5.3.4 EUT - Front View .......................................................................................................................................15 5.3.5 EUT - Back View ........................................................................................................................................15 5.3.6 PCB1 - Front View .....................................................................................................................................16 5.3.7 PCB1 - Back View ......................................................................................................................................16 5.3.8 PCB2 - Front View .....................................................................................................................................17 5.3.9 PCB2 - Back View ...................................................................................................…

Text truncated - open the document above for the full version.

Conduction Emissions Test Setup Radiated Emissions Test Setup