SJ8M270WIRELESS LCD MONITOR

900MHz Wireless Color Baby Camera System Includes: Color Video/Audio Camera & LCD Monitor Congratulations on your purchase of the 900MHz Wireless Baby Care Color Camera System (CMS2727). The System consists of a wireless LCD Monitor and a wireless color day & night Baby Camera. An ideal product for watching the baby, elder or patient application. Features /// * 900MHz wireless technology * Plug & play installation * The system supports up to 3 cameras * 2.4 inch TFT-LCD screen for good picture display * The Brightness, Alarm volume, and Audio volume can be adjusted * LCD Monitor can work with 3 modes: Scan, Auto and Manual * Monitor with A/V output port connecting to TV * Adjustable dwell/cycle time between cameras in Auto mode * Baby Camera with sound trigger & night vision * Baby Camera with friendly designation of night light * Camera with Velcro for cradle mounting * Both camera and monitor can be operated by rechargeable battery pack * Both LCD Monitor and Baby Camera can be wall mounted or table top System Contents /// Identify all parts before proceeding with installation Things to Consider before Installation /// For best performance, follow these simple guidelines: * The camera should be aimed accordingly to optimize viewing area * For best transmission, avoid installation where there are thick walls or major obstructions between the camera and LCD monitor Installing the Camera (Transmitter) /// 1. Unpack the Camera 2. Decide on wall or desk mounting the Camera. If wall mounting, there is a useful guide on the back cover of the instructions, and the rechargeable battery pack should not be used then. If cradle mounted, use the Velcro in the package to mount the camera on the cradle. Anyway, the Camera head can be rotatable for ideal or required position. 3. To use the camera power adapter, connect power jack to the input on the back of the Camera base. Make sure the Camera is positioned no more than 5 feet from an AC power outlet. 4. You can adjust the sensitivity for the sound alert feature by adjusting the SOUND TRIGGER knob found on the side of the Camera. 5. The Camera (Transmitter) installation is now complete. Night Vision /// The Camera includes IR LEDs, which allows viewing up to 5 feet in the dark automatively when used with the adapter. Adjust the “brightness” knob may get better display for darkness use. Night Light /// The friendly designation is the button for night light which is located on the top of the camera. When press the button, the top of the camera will be lightened. The soft light avoids dazzling baby's eyes in the dark. Installing the LCD Monitor (Receiver) /// Main Operation 1. If use the rechargeable battery base (see the right picture), Plug the LCD Monitor AC power supply into the power jack in the battery recess of the battery base. If not (see the left picture), Plug the LCD Monitor AC power supply into the power jack in the battery recess of the LCD 2. Turn on the LCD Monitor by pressing the front panel power button. 3. Choose the channel to match the camera and you can see the image from camera. Optimizing the Wireless Camera System /// * The 900MHz video signal passes easily through your home’s interior walls, but the signal may be reflected by power wires or plumbing inside the wall. * Sound Level can be adjusted using the volume control button on the panel of the Monitor. * Adjust Brightness as required using +/- button on the right side of the LCD Monitor. * The Sensitivity of Sound Trigger can be adjusted by Baby Camera’s TRIGGER LEVEL knob. * The most common source of interference are microwave ovens, WiFi products. Try to avoid mounting the LCD Monitor near a microwave oven or other source of RF interference such as cordless phones, WiFi products. * To avoid the interference from camera, we recommend you set your WiFi at channel 10. Multi-camera Operation /// The Wireless Baby Care Color Camera System (CMS2724L) is designed to work with up to 3 Cameras. Additional Camera are sold separately. IMPORTANT: When using more than one Camera, make sure each Camera is assigned to a specific channel by adjusting the corresponding DIP switch down. Accordingly the DIP switch located on the bottom of the LCD Monitor should be adjusted to reflect the channel in use. Sound-Trigger Cameras /// The baby Camera has the Sound Trigger Feature. When a Camera detects sound, an audio alert sounds on the LCD Monitor(The audio alert is adjustable). The Sensitivity of the Sound Trigger can be adjusted by the Baby Camera’s TRIGGER LEVEL knob on side of the Camera head. Operating Modes /// The system can be set to operate in one of 3 modes: SCAN, AUTO or MANUAL. The desired operating mode can be selected using the buttons on the front panel of the LCD Monitor. SCAN Pressing the SCAN button places the system in Scan mode. The LCD Monitor screen blanks into a standby mode while the system continuously scans active Cameras. If a Camera detects sound above the preset sound trigger level, the LCD Monitor displays the Camera picture and the beeper will sound. Four minutes after the last detection, the screen returns to standby mode and the LCD Monitor resumes scanning. Pressing the MANUAL or AUTO button will cancel this mode. AUTO Pressing the AUTO button places the system in Auto mode. In this mode, the system automatically rotates through all active Cameras. When a Camera detects sound above the preset level, the LCD Monitor will display the picture from the Camera for a few seconds, and the beeper will sound. To avoid searching the channels that do not have cameras/transmitters assigned to them, set the dip switches (located on the bottom of the LCD Monitor) for those corresponding channels to the OFF position. The dwell/cycle time (time taken to switch between cameras) is preset to four seconds and can be adjusted between 2-30 seconds. To adjust the dwell/cycle time, press both the AUTO and MANUAL buttons simultaneously. Each flash of the LED increases the dwell time by…

Text truncated - open the document above for the full version.

安帝爱科技(深圳)有限公司 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8M270 POWER OF ATTORNEY Mar.5, 2008 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (Hongkong) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (Hongkong) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Mar.6, 2009. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, RDI Technology (Shenzhen) Co., Ltd., are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, RDI Technology (Shenzhen) Co., Ltd. ------------------------------- Jack Sheng Engineering Manager

EUT - Front View EUT - Back View Adapter - Front View 1.1.1 Adapter - Back View

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Top View/ proposed FCC Mark Location FCC ID:SJ8M270

FCC ID Label Sample for Model: M270 FCC ID: SJ8M270 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Monitor- Open View PCB1 of Monitor - Front View PCB1 of Monitor - Back View PCB2 of Monitor - Front View PCB2 of Monitor - Back View PCB3 of Monitor - Front View PCB3 of Monitor - Back View Battery Charging Base - Open View PCB of Battery Charging Base - Front View PCB of Battery Charging Base - Back View

M270 Wireless LCD Monitor Feb. 20 2007 Architecture: M270 Wireless LCD Monitor includes received high quality video and audio components.The Wireless LCD Monitor is a 900Mhz wireless monitor compatible with any RDI or compatible wireless camera, an ideal product for monitoring the porch, watching the yard, pool, pets or the baby. It is also suited to many small business applications. M240 Wireless LCD Monitor hardware architecture is show in Block diagram. 1. The 900Mhz RX module is assigned to receive the CVBS video and audio signal. And output trigger signal to MCU for judge.Then drive the buzzer to alarm. 2. MCU (Micro control unit) AT8P59 operates periodically.Including control Manual, Auto button ,control dip switcher to select RF module channel , control LED display RF module channel and control AV output etc. 3. The CVBS (Color Video Blanking and Synchronizing ) signal through Y/C divider into TVP5150 RGB Decode/Driver then decode the CVBS signal and generate timing to drive and synchronize the TFT LCD Panel for show real picture.The color,contrast and brightness of panel were adjusted by EM78P156ELM.

RDI533(Topplt2.36)V1.2.sch-1 - Fri Feb 01 09:38:41 2008 RDI533(Topplt2.36)V1.2.sch-2 - Fri Feb 01 09:38:53 2008

FCC TEST REPORT Page 1 of 23 FCC ID NO. : SJ8M270 Applicant : RDI Technology (Shenzhen) Co., Ltd. Building C1 Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, P.R.C. Equipment Under Test (EUT) : Product Name : Wireless LCD Monitor Model No. : M270 Standards : FCC Part 15 SUBPART B Date of Test : Mar. 5, 2008 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8M270 Page 2 of 23 2 Test Summary Test Test RequirementTest Method Class / Severity Result Radiated Emission (30MHz to 5GHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8M270 Page 3 of 23 3 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 TEST SUMMARY....................................................................................................................................................2 3 CONTENTS ..............................................................................................................................................................3 4 GENERAL INFORMATION..................................................................................................................................4 4.1 CLIENT INFORMATION............................................................................................................................................4 4.2 GENERAL DESCRIPTION OF E.U.T...........................................................................................................................4 4.3 DETAILS OF E.U.T. .................................................................................................................................................4 4.4 DESCRIPTION OF SUPPORT UNITS...........................................................................................................................4 4.5 TEST FACILITY........................................................................................................................................................5 4.6 TEST LOCATION......................................................................................................................................................5 5 EQUIPMENT USED DURING TEST ...................................................................................................................6 5.1 CONDUCTION EMISSIONS, 0.15MHZ TO 30MHZ.....................................................................................................7 5.1.1 E.U.T. Operation..........................................................................................................................................7 5.1.2 Measurement Result .....................................................................................................................................8 5.1.3 Measurement Data .......................................................................................................................................9 5.2 RADIATED EMISSIONS, 30MHZ TO 5GHZ.............................................................................................................10 5.2.1 E.U.T Operation.........................................................................................................................................10 5.2.2 EUT Setup ..................................................................................................................................................10 5.2.3 Spectrum Analyzer Setup............................................................................................................................11 5.2.4 Test procedure............................................................................................................................................11 5.2.5 Summary of Test Results ............................................................................................................................11 5.2.6 Radiatied Emissions Test Data ..................................................................................................................12 PHOTOGRAPHS - TEST SETUP .................................................................................................................................13 5.2.7 Conduction Emissions Test Setup ..............................................................................................................13 5.2.8 Radiated Emissions Test Setup For 30MHz-1000MHz ..............................................................................14 5.2.9 Radiated Emissions Test Setup For 1GHz-5GHz.......................................................................................14 6 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS .......................................................................................15 6.1.1 EUT - Front View .......................................................................................................................................15 6.1.2 EUT - Back View ........................................................................................................................................15 6.1.3 Adapter - Front View..................................................................................................................................16 6.1.4 Adapter - Back View...................................................................................................................................16 6.1.5 Monitor- Open View...................................................................................................................................17 6.1.6 …

Text truncated - open the document above for the full version.

Conduction Emissions Test Setup Radiated Emissions Test Setup For 30MHz-1000MHz Radiated Emissions Test Setup For 1GHz-5GHz