SJ8RX210WIRELESS RECEIVER

7 Drilling Template for Wall Mounting Camera(s)/// For wall-mounting Camera (s), drill three holes using a 1/4” drill bit and the template below. Insert supplied wall anchors into holes and secure Camera to wall with supplied screws. INDOOR/OUTDOOR 900MHz WIRELESS CAMERA SYSTEM USINCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/RECEIVER CR3020 USER’S GUIDE Congratulations on your purchase of the 900MHz Wireless Color Camera system . The system consists of a wireless A/V receiver and a wireless Camera, an ideal product for application of covert monitoring, such as the porch, watching the yard, pool, pets or the baby. It is also suited to small business surveillance application. . FEATURES • 900MHz wireless technology • Color camera with night vision • Both audio and video output • Supports up to 2 cameras • Manual or auto switching between cameras • Adjustable cycle time between different channels • AC power adaptor or battery operation • Weatherproof construction( IP54 standard) for outdoor use • WiFi interference free SYSTEM CONTENTS • Wireless A/V receiver x1 • Wireless Camera with night vision x1 •Power adaptor x2 •Adaptor cable x1 •Hardware kit x1 •Manual x1 THINGS TO CONSIDER BEFORE INSTALLATION For best performance, follow these simple guidelines: • Camera(s) should be installed between 8 and 13 feet above the area to be APPROVALS/// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and, (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE The manufacturer is not responsible for any radio or TV interference caused by authorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. WARRANTY/// This product has a one year manufacturer’s warranty which covers parts and labor only. In the Unlikely event that you encounter a problem, the unit should be returned to the place of purchase. 1 6 5 Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, receiver or both to improve the reception quality. 3. If a camera is positioned close to the receiver, point antenna away from the receiver. Audio problems 1. Ensure the volume is turned up sufficiently on the TV. 2. Make sure the sound is within the microphone range. 3. If the unit emits a loud wailing sound (feeds back), try moving the camera away from the receiver or angle the receiver differently. SPECIFICATIONS Camera TV System PAL or NTSC Resolution 360 horizontal TV Lines Signal/Noise Ratio 48dB High-Speed Electronic Shutter 1/60 - 1/15,000 sec Image Sensor 1/3” CMOS Min. Illumination 0.1 lux Current Consumption 150mA Overall Size 2.36"L×1.69" Diameter Frequency 910MHz, 920MHz Modulation FM Video Signal/Noise Ratio 48dB Audio Signal/Noise Ratio 45dB Case Finish Metal Aluminum case, suited for indoor or outdoor use 2 monitored • The Camera should be aimed accordingly to optimize viewing area • For best transmission, avoid installations where there are thick walls or major obstructions between the Camera and Receiver INSTALLING THE CAMERA (TRANSMITTER) 1. Unpack the Camera. 2. Decide whether the Camera will be wall-mounted or sit on a desk/table top. If wall mounting, use the hardware kit in the package. The Camera can be adjusted for either mounting scenario by rotating the Camera to the required position. DESK TOP WALL MOUNTING 3. If using the 9V camera power adapter, just connect power jack. Make sure the Camera is positioned no more than 5 1/2 feet from an AC power outlet. 4. Each camera’s channel number can be set by user, screw the lens part of camera to open the lens cover, and then could set the camera’s channel number. After finish setting the channel, screw the lens cover on. 5. The Camera (Transmitter) installation is now complete. Night Vision/// The Camera includes IR LEDs, which allows viewing up to 12 feet in the dark when used with the adapter. It can automatically turn to night vision in low light. SETTING UP THE RECEIVER 3 1. Connect one end of the cable to the back of the receiver, the another end (RCA cord) to your television's A/V inputs, the yellow plug to the VIDEO IN jack and the white plug to the AUDIO IN jack. 2. Plug the receiver power adapter into the 9V DC power jack on the back of the receiver and plug the power adapter into any 120 V/240 V power outlet. 3. Place the receiver either on top or near to your TV. Rotate the antenna to a vertical position. OPTIMIZING THE WIRELESS CAMERA SYSTEM The 900MHz video signals pass easily through your home’s interior walls, but the signal may be reflected by power wires or plumbing inside the wall. Usually a slight adjustment of the Receiver and/or Camera antenna will improve reception. Take care not to force the antennas past their lock positions. MULTI-CAMERA OPERATION Our wireless 900MHz Camera system is designed to work with up to 2 Cameras. Additional Cameras are sold separately. IMPORTANT: When using more than one Camera, please check channel number on package, make sure it is exclusive to each camera. Accordingly the dip switch located on the back of the Receiver should be adjusted to reflect the channels in use. OPERATING THE SYSTEM Set your TV to monitor the VIDEO INPUT designated for the Receiver. The receiver can support up to two different camera/transmitter signals. You can switch from one camera to the next either manually or automatically via button on the top panel of the receiver. MANUAL MODE To select one of the two channels manually, press the MANUAL button on the panel of the receiver. The receiver will switch to a different channel (CAM1, CAM2) each time when the MANUAL button is pressed. To avoid searching channels that do not have 4 cameras/transmitters assigned to them, set the DIP switches (located …

Text truncated - open the document above for the full version.

安帝爱科技(深圳)有限公司 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8RX210 POWER OF ATTORNEY Mar.5, 2008 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (Hongkong) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (Hongkong) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Mar.6, 2009. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, RDI Technology (Shenzhen) Co., Ltd., are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, RDI Technology (Shenzhen) Co., Ltd. ------------------------------- Jack Sheng Engineering Manager

EUT - Front View EUT - Back View Adapter - Front View Adapter - Back View

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Top View/ proposed FCC Mark Location FCC ID:SJ8RX210 This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

PCB1 - Front View PCB1 - Back View PCB2 - Front View PCB2 - Back View

RX210 Wireless Receiver Feb, 18th, 2008 Architecture RX210 Wireless Receiver includes received high quality video and audio components, The unit is a wireless receiver compatible with any RDI or compatible wireless camera, an ideal product for monitoring the porch, watching the yard, pool, pets or the baby. It is also suited to many small business applications. RX210 hardware architecture is show in Figure 1. 1> The 900MHz RX module is assigned to receive the video and audio signal wirelessly. 2> MCU(Micro control unit) operates periodically . Including control Manual, Auto button ,control dip switcher to select RF module channel , control sound trigger, control LED display RF module channel, etc.

FCC TEST REPORT Page 1 of 19 FCC ID NO. : SJ8RX210 Applicant : RDI Technology (Shenzhen) Co., Ltd. Building C1 Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, P.R.C. Equipment Under Test (EUT) : Product Name : Wireless Receiver Model No. : RX210 Standards : FCC Part 15 SUBPART B Date of Test : Mar. 5, 2008 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8RX210 Page 2 of 19 2 Test Summary Test Test RequirementTest Method Class / Severity Result Radiated Emission (30MHz to 5GHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART B: 2003 ANSI C63.4: 2003 Class B PASS RDI Technology (Shenzhen) Co., Ltd. FCC ID: SJ8RX210 Page 3 of 19 3 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 TEST SUMMARY....................................................................................................................................................2 3 CONTENTS ..............................................................................................................................................................3 4 GENERAL INFORMATION..................................................................................................................................4 4.1 CLIENT INFORMATION............................................................................................................................................4 4.2 GENERAL DESCRIPTION OF E.U.T...........................................................................................................................4 4.3 DETAILS OF E.U.T. .................................................................................................................................................4 4.4 DESCRIPTION OF SUPPORT UNITS...........................................................................................................................4 4.5 TEST FACILITY........................................................................................................................................................5 4.6 TEST LOCATION......................................................................................................................................................5 5 EQUIPMENT USED DURING TEST ...................................................................................................................6 5.1 CONDUCTION EMISSIONS, 0.15MHZ TO 30MHZ.....................................................................................................7 5.1.1 E.U.T. Operation..........................................................................................................................................7 5.1.2 Measurement Result .....................................................................................................................................8 5.1.3 Measurement Data .......................................................................................................................................9 5.2 RADIATED EMISSIONS, 30MHZ TO 5GHZ.............................................................................................................10 5.2.1 E.U.T Operation.........................................................................................................................................10 5.2.2 EUT Setup ..................................................................................................................................................10 5.2.3 Spectrum Analyzer Setup............................................................................................................................11 5.2.4 Test procedure............................................................................................................................................11 5.2.5 Summary of Test Results ............................................................................................................................11 5.2.6 Radiatied Emissions Test Data ..................................................................................................................12 6 PHOTOGRAPHS - TEST SETUP........................................................................................................................13 6.1.1 Conduction Emissions Test Setup ..............................................................................................................13 6.1.2 Radiated Emissions Test Setup For 30MHz-1000MHz ..............................................................................14 6.1.3 Radiated Emissions Test Setup For 1GHz-5GHz.......................................................................................14 7 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS .......................................................................................15 7.1.1 EUT - Front View .......................................................................................................................................15 7.1.2 EUT - Back View ........................................................................................................................................15 7.1.3 Adapter - Front View..................................................................................................................................16 7.1.4 Adapter - Back View...................................................................................................................................16 7.1.5 PCB1 - Front View .....................................................................................................................................17 7.1.6 PCB1 …

Text truncated - open the document above for the full version.

Conduction Emissions Test Setup Radiated Emissions Test Setup For 30MHz-1000MHz Radiated Emissions Test Setup For 1GHz-5GHz