SJ8WL100Wireless Spotlight Camera

WL100 User Manual HD Wi-Fi Camera with LED Light What’s in the box? WL100 Camera Power adaptor Mounting Hardware User manual 2 Camera Overview Getting Started 1. Go to App store or Google Play Store to download and install TuyaSmart on your smart phone, and register your account per instruction step by step from App. 3 2. Install and set up the camera a. Go to your phone WiFi Settings, and connect your phone to the router which you want to register WL100 to via 2.4G, do not connect the router through 5G b. Open TuyaSmart, touch “Add Device” at the bottom, select “Security & Sensor” from the left category, and then select “Smart Camera” Power on your WL100 camera, there will be an audible alert (a short music) and then the indication LED (working indicator) will be fast flash and with “du-du” sound about every 17 seconds, (if the camera LED is not in fast flash and no “du-du”, pls reset the camera by pushing and hold the reset key at the rear of the camera for 5 second). Go to the next step, input your home router WiFi password, create a QR code, let camera scan the QR code, once you hear an audible sound（du---）, means the camera scan QR code successfully, after a while APP shows connect successfully and the camera indication LED will change to solid green, means camera connected to router successfully. NOW YOU CAN USE YOUR SMART PHONE TO CONNET TO YOUR CAMERA, WATCH LIVE VIEW, PLAYBACK, TWO WAY TALK ETC. FREELY 4 Live View: In camera list, Touch the icon , you can get multi camera view in one page. Touch each camera in the list, you can get single camera view. In single camera view --Touch this icon, you can activate audio or turn off audio. Touch this icon, you can change the live view resolution between HD and SD Touch this icon to get full screen live view.. Touch this icon to get a snapshot for the live view, store in your cell phone. Touch this icon to record current live view into your cell phone. Touch this icon to talk to camera from your cell phone, you can go to \basic settings\talk mode to select one way or two-way (full duplex) talk. 5 Touch the icon to go into playback page to playback today’s recording, you can slide the time bar to select recordings in different time—the grey partial are recordings. In playback page, 1. touch Calendar icon to select other date’s recordings. 2. Touch the record icon to record the playback video into your cell phone. 3. Touch the snapshot icon to get a snapshot doe what you see, store in your cell phone. Touch this icon in live view page to go into “Detection Alarm Settings” (explain later). Touch this icon in live view page to go into lamp settings. Touch icon to manually turn on/off the white LED Touch icon to adjust the dimmer of the white LED Touch iconto set lighting schedule, touch add, first set the time when the light on and then set the time when the light off. Touch icon to set if the light will be on or not when motion detected and if on, how long (duration) the light will stay on. In live view page, scroll down, you will find two more icons Touch this icon to go into Photo Album (not available for iOS App) Touch this icon to go into cloud storage playback. 6 Settings In Live View, touch this icon to go into settings. Touch the device name “Wireless Spotlight Camera” you can change the icon, device name and location of your device. Device Information (\Device Information) Touch this, you can check your account, IP Address, Device ID and Device Time Zone Tap-to Run and Automation NA for this camera. Third Party Supported (\Third Party Supported) Touch Amazon Echo and Google Home to get instruction on how to connect your device to Amazon Echo and Google Home. Basic Function Settings (\Basic Function Settings) Touch this, you can Set Flip Screen on/off and set talk back mode, one-way (push to talk like a walkie-talkie or full duplex two way talk IR Night Vision (\IR Night Vision) Touch this to set IR night vision mode, Auto (only on at night time), Off (always off) or On (always on) Detection Alarm Settings (\Detection Alarm Settings) Touch this to go into submenu Motion Detection Alarm—Set video motion detection on/off 7 Alarm Sensitivity Level—Set Video motion detection sensitivity—High/Medium/Low Activity Area—Turn on/off the activity area, only turn on then you can set the following Surveillance Area Settings—Touch this to set the activity area, drag the corner to adjust the area, touch the center to move the area, once finalized, touch save. PIR (\PIR) Touch this to set PIR (heat motion detection) sensitivity, High, Medium, Low and Off Pls note if both PIR and Motion Detection Alarm are on, the device will be in smart detection mode, means only if both PIR detects motion (heat change) and image sensor detects video change (VMD), camera will consider there is movement and trigger recording or turn on the light (at night time)。VMD or PIR can work independently if only one of them is on Storage Settings （include Record setting） (\Storage Settings) Touch this to go into Storage Settings, you can check the SD card capacity, total, used Local Recording—Turn on/off local recording (into SD card) Mute Recording—Set to record audio or not. Recording Mode—Set different recording mode, Event Recording or Non-Stop recording. Schedule—Schedule recording is for local recording only. Before setting, you need to decide if you want non-stop recording or only motion recording in the schedule you set: Enable the local recording, select recording mode (non-stop or event recording) Add schedule recording: Touch Add, select what time to start recording first and then select what time to stop recording. Format—Format SD card, all the data will be deleted if you confirm. 8 Purchase VAS (\Purchase VAS) Touch this to go into cloud recording service page, following the instruction to select service and pay for it, once you purchased could storage service, you will get 10 seconds recording for events and you can play back from your smartphone. Share Device…

Text truncated - open the document above for the full version.

Report No. : TB-FCC173818 Page : 3 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Report No. : TB-FCC173818 Page : 4 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT 2.4G Ant. Report No. : TB-FCC173818 Page : 5 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT Report No. : TB-FCC173818 Page : 6 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 7 Appearance of EUT

Report No. : TB-FCC173818 Page : 1 of 12 FCC ID: SJ8WL100 TB-RF-074-1.0 Appendix IFCC ID Label Size：40x20cm FCC ID: SJ8WL100 Wireless Spotlight Camera This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Model: WL100 Report No. : TB-FCC173818 Page : 2 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Appendix II ID Label Location ID LOCATION

Report No. : TB-FCC173818 Page : 7 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Appendix IV EUT Internal Photographs Photo 8 Internal of EUT Photo 9 Internal of EUT Report No. : TB-FCC173818 Page : 8 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 10 Internal of EUT Photo 11 Internal of EUT Report No. : TB-FCC173818 Page : 9 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB Report No. : TB-FCC173818 Page : 10 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo 14 Appearance of PCB Photo 15 Appearance of PCB

version01 RDI Technology (Shenzhen) Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: WL100, WD542 FCC ID: SJ8WL100 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for External antenna type(s) described below: Model No. of antenna: N/A Type of antenna: 2dBi Dipole Antenna Gain of the antenna: 2dBi Frequency range: 2412-2462 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: RDI Technology (Shenzhen) Co., Ltd. Address: 101 to 401, Building 1, and Building 2, No. 7 Yongyue Road, East Baishixia, Fuyong, Baoan, Shenzhen. PRC City: ShenZhen ZIP / Postal code: Country: China Place: Terry zhang / Engineering Manager Date: 2020-07-08 Signature:

Report No.: TB-MPE173819 Page: 1 of 3 TB-RF-075-1.0 Maximum Permissible Exposure Evaluation FCC ID: SJ8WL100 1. Client Information Applicant : RDI Technology (Shenzhen) Co., Ltd. Address : 101 to 401, Building 1, and Building 2, No. 7 Yongyue Road, East Baishixia, Fuyong, Baoan, Shenzhen. PRC Manufacturer : RDI Technology (Shenzhen) Co., Ltd. Address : 101 to 401, Building 1, and Building 2, No. 7 Yongyue Road, East Baishixia, Fuyong, Baoan, Shenzhen. PRC 2. General Description of EUT EUT Name : Wireless Spotlight Camera Models No. : WL100, WD542 Model Different : All of these models are in the same PCB, layout and circuitry, the only difference is model name. Brand Name : CasaCam Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz Number of Channel: 802.11b/g/n(HT20):11 channels 802.11n(HT40):7 channels RF Output Power: 802.11b:18.27dBm 802.11g: 17.66dBm 802.11n (HT20): 16.25dBm 802.11n (HT40): 15.61dBm Antenna Gain: 2 dBi Dipole Antenna Power Rating : Input:AC100-AC240V(CS18J090200FGF) Output:9V2A Software Version : N/A Hardware Version : N/A Connecting I/O Port(S) : Please refer to the User's Manual Remark : the MPE report used the EUT(TBBJ-20200622-03-2#). Report No.: TB-MPE173819 Page: 2 of 3 TB-RF-075-1.0 MPE Calculations for WIFI 1. Antenna Gain: Dipole Antenna:2dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Mode N TX Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm 2 ) [S] 802.11b 1 2412 18.20 18±1 19 2 20 0.0250 2437 18.27 18±1 19 2 20 0.0250 2462 17.88 18±1 19 2 20 0.0250 802.11g 1 2412 17.66 17±1 18 2 20 0.0198 2437 17.53 17±1 18 2 20 0.0198 2462 17.01 17±1 18 2 20 0.0198 802.11n(HT20) 1 2412 15.94 16±1 17 2 20 0.0158 2437 16.25 16±1 17 2 20 0.0158 2462 16.21 16±1 17 2 20 0.0158 802.11n(HT40) 1 2422 15.14 15±1 16 2 20 0.0125 2437 15.61 15±1 16 2 20 0.0125 2452 15.31 15±1 16 2 20 0.0125 Note: (1) N TX = Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TB-MPE173819 Page: 3 of 3 TB-RF-075-1.0 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For 2.4WIFI:2412~2462 MHz 2422~2452 MHz MPE limit S: 1mW/ cm 2 The MPE is calculated as 0.0250 mW / cm 2 < limit 1mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. 6. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF REPORT-----

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC173818 Page: 1 of 79 TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: SJ8W L100 Original Grant Report No. : TB-FCC173818 Applicant : RDI Technology (Shenzhen) Co., Ltd. Equipment Under Test (EUT) EUT Name : Wireless Spotlight Camera Model No. : WL100 Series Model No. : WD542 Brand Name : CasaCam Sample ID : TBBJ-20200622-03-1#& TBBJ-20200622-03-2# Receipt Date : 2020-06-23 Test Date : 2020-06-24 to 2020-07-08 Issue Date : 2020-07-08 Standards : FCC Part 15, Subpart C 15.247 Test Method : ANSI C63.10: 2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC and IC requirements Test/Witness Engineer : Jack Deng Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC173818 Page: 2 of 79 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 6 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT .................................................................................................................. 11 5. CONDUCTED EMISSION TEST ........................................................................................... 12 5.1 Test Standard and Limit .................................................................................................... 12 5.2 Test Setup ........................................................................................................................... 12 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 13 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data ............................................................................................................................. 13 6. RADIATED EMISSION TEST ................................................................................................ 14 6.1 Test Standard and Limit .................................................................................................... 14 6.2 Test Setup ........................................................................................................................... 15 6.3 Test Procedure ................................................................................................................... 16 6.4 Deviation From Test Standard ......................................................................................... 17 6.5 EUT Operating Condition ................................................................................................. 17 6.6 Test Data ............................................................................................................................. 17 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 18 7.1 Test Standard and Limit .................................................................................................... 18 7.2 Test Setup ........................................................................................................................... 18 7.3 Test Procedure ................................................................................................................... 19 7.4 Deviation From Test Standard ......................................................................................... 19 7.5 EUT Operating Condition ................................................................................................. 19 7.6 Test Data ............................................................................................................................. 19 8. BANDWIDTH TEST ................................................................................................................. 20 8.1 Test Standard and Limit .....................…

Text truncated - open the document above for the full version.

Report No. : TB-FCC173818 Page : 11 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) Report No. : TB-FCC173818 Page : 12 of 12 FCC ID: SJ8WL100 TB-RF-075-1.0 Photo of Setup for Conducted Emission -----END OF REPORT-----