SJE13EASJEDual Band GSM/GPRS (CLASS 8): 850 / 1900 MHz Mobil

Advanced Wireless Devices CE Owasys Advanced Wireless Devices SL(hereafter called as Owasys), the manufacturer of the product des- cribed in this manual, certifies that said product complies with all Radio and Telecommunications end equipment regulations described in the directive 1999/5/EC, the requirements included in the EMC directive 89/336/EEC and the Low Voltage directive 73/23/EEC. The reproduction of this document, in whole or in part, by any means electronic, mechanical, photocopying, or recording, without the express written permission of Owasysis forbidden. January 2005 Edition Owasys Advanced Wireless Devices SL (hereafter called as Owasys), publishes this manual without warranty of its content. Owasysreserves the right to make changes at any time and without prior notice to improve and change this manual as necessitated by typographical errors, inaccurate information as printed, or improvements to the product. These changes will be incorporated into new editions of this manual. Allrights reserved ©Owasys, 2005 Document Number: BOK-200 0005-P1C owasys22C User’s guide Advanced Wireless Devices 1 General Information . . . . . . . . . . . . . . . .6 1.1 User Warnings . . . . . . . . . . . . . . . . . .6 1.2 Exposure to Electromagnetic Radio Waves and SAR . . . . . . . . . . .12 1.3 Applicable Standards and Regulations . . . . . . . . . . . . . . . . . . . .15 1.4 Technical Data . . . . . . . . . . . . . . . . .15 1.5 Practical Advice for the Care and Maintenance of the Product . . . . . .16 1.6Effective Use of the Product . . . . . .17 2 Getting Started . . . . . . . . . . . . . . . . . . . .18 2.1 Insertion and Removal of the SIM Card . . . . . . . . . . . . . . . . .18 2.2 Installing the Battery . . . . . . . . . . . .20 2.3 Charging the Battery . . . . . . . . . . . .22 3 Turning the Phone On and Off . . . . . . .23 3.1 Turning the Phone On . . . . . . . . . . .23 3.2 Entering in the PIN . . . . . . . . . . . . .23 3.3 Turning the Phone Off . . . . . . . . . . .24 4 The Telephone . . . . . . . . . . . . . . . . . . . .25 4.1 Physical Description of the Telephone . . . . . . . . . . . . . . . . . .25 4.2 Menu Structure . . . . . . . . . . . . . . . .32 5 Making and Receiving Calls . . . . . . . . .35 5.1 How to Make a Call . . . . . . . . . . . . .35 5.2 How to End a Call . . . . . . . . . . . . . . .35 5.3 How to Answer an Incoming Call . .36 5.4Rejecting a Call . . . . . . . . . . . . . . . .36 5.5 Recalling the Most Recent Numbers . . . . . . . . . . . . . . . . . . . . . .36 6 Phone Book . . . . . . . . . . . . . . . . . . . . . . .37 6.1 Find and Call . . . . . . . . . . . . . . . . . .37 6.1.1 Alphabetic Search . . . . . . . . . .38 6.2 New Contact . . . . . . . . . . . . . . . . . . .38 6.3 Edit Contact . . . . . . . . . . . . . . . . . . .39 6.4 Delete Contact . . . . . . . . . . . . . . . . .40 6.5 Phone Book Status . . . . . . . . . . . . . .41 6.6 Special Numbers . . . . . . . . . . . . . . .41 TABLE OF CONTENTS 3 6.6.1 My Numbers . . . . . . . . . . . . . .41 6.6.2 Emergency Number . . . . . . . .42 6.6.3 Service Number . . . . . . . . . . .42 6.7 Copy Phone Book . . . . . . . . . . . . . . .42 7 Messages . . . . . . . . . . . . . . . . . . . . . . . .43 7.1 Send New Message . . . . . . . . . . . . .43 7.2 Unread Messages . . . . . . . . . . . . . . .44 7.3 Read Messages . . . . . . . . . . . . . . . .45 7.4 Sent Messages . . . . . . . . . . . . . . . . .45 7.5 Unsent Messages . . . . . . . . . . . . . . .46 7.6 Voice Mailbox . . . . . . . . . . . . . . . . . .46 7.7 Message Options . . . . . . . . . . . . . . .47 8Configuration . . . . . . . . . . . . . . . . . . . . .48 8.1Sounds and Alarms . . . . . . . . . . . . .48 8.1.1 Ring Volume . . . . . . . . . . . . . . .48 8.1.2 Vibrating Alert . . . . . . . . . . . . .48 8.1.3 Ringing Tones . . . . . . . . . . . . .49 8.1.4 Initial Tone . . . . . . . . . . . . . . . .49 8.1.5 Coverage Alert . . . . . . . . . . . . .49 8.2 Adjust Date and Time . . . . . . . . . . . .49 8.2.1 Set Time . . . . . . . . . . . . . . . . . .49 8.2.2 Changing the Hour Format . .50 8.2.3 Changing the Date . . . . . . . . .50 8.3 Locks . . . . . . . . . . . . . . . . . . . . . . . . .50 8.3.1 Lock the Card . . . . . . . . . . . . .50 8.3.2 Lock the Telephone . . . . . . . . .51 8.4 Voice Synthesis Configuration . . . . .51 8.4.1 Selecting the Speed of the Spoken Voice . . . . . . . . .52 8.4.2 Selecting the Pitch of the Spoken Voice . . . . . . . . .52 8.5 Versions . . . . . . . . . . . . . . . . . . . . . . .52 8.6 Factory Settings . . . . . . . . . . . . . . . .52 9 Call Information . . . . . . . . . . . . . . . . . . .53 9.1Call Information . . . . . . . . . . . . . . . .53 9.2 Call Log Memory . . . . . . . . . . . . . . .53 9.3 Clear Call List . . . . . . . . . . . . . . . . . .53 10 Manage Calls . . . . . . . . . . . . . . . . . . . . .54 10.1 My Number . . . . . . . . . . . . . . . . . . .54 10.2 Call Divert . . . . . . . . . . . . . . . . . . . .54 10.3 Call Barring . . . . . . . . . . . . . . . . . . .55 10.4 Call Waiting . . . . . . . . . . . . . . . . . . .57 4 11 Extras . . . . . . . . . . . . . . . . . . . . . . . . . . .58 11.1 Turning off the telephone . . . . . . . .58 12 Accesories . . . . . . . . . . . . . . . . . . . . . . . .59 13 FDA Statement . . . . . . . . . . . . . . . . . . . .60 14 Manufacturer ́s Limited Warranty . . . .68 INDEX OF FIGURES Insertion of the SIM Card . . . . . . . . . . . . . .19 Placement of the battery . . . . . . . . . . . . . . .20 Removing the battery . . . . . . . . . . . . . . . . .21 Front view of the owasys22C . . . . . . . . . . . .26 Side connectors on the owasys22C . . . . . .31 INDEX OF TABLES Alphanumeric keypad on the owasys22C . . . . . . . . . . . . . . . . . . . . . . .30 5 1 GENERAL INFORMATION The information contained in this user’s guide is written for the Owasys mobile phone model owasys22C in 2 different versions: GSM 900/1800 and GSM 850/1900. Export controls This product is sub…

Text truncated - open the document above for the full version.

Advanced Wireless Devices CE Owasys Advanced Wireless Devices SL(hereafter called as Owasys), the manufacturer of the product des- cribed in this manual, certifies that said product complies with all Radio and Telecommunications end equipment regulations described in the directive 1999/5/EC, the requirements included in the EMC directive 89/336/EEC and the Low Voltage directive 73/23/EEC. The reproduction of this document, in whole or in part, by any means electronic, mechanical, photocopying, or recording, without the express written permission of Owasysis forbidden. January 2005 Edition Owasys Advanced Wireless Devices SL (hereafter called as Owasys), publishes this manual without warranty of its content. Owasysreserves the right to make changes at any time and without prior notice to improve and change this manual as necessitated by typographical errors, inaccurate information as printed, or improvements to the product. These changes will be incorporated into new editions of this manual. Allrights reserved ©Owasys, 2005 Document Number: BOK-200 0005-P1C owasys22C User’s guide Advanced Wireless Devices 1 General Information . . . . . . . . . . . . . . . .6 1.1 User Warnings . . . . . . . . . . . . . . . . . .6 1.2 Exposure to Electromagnetic Radio Waves and SAR . . . . . . . . . . .12 1.3 Applicable Standards and Regulations . . . . . . . . . . . . . . . . . . . .15 1.4 Technical Data . . . . . . . . . . . . . . . . .15 1.5 Practical Advice for the Care and Maintenance of the Product . . . . . .16 1.6Effective Use of the Product . . . . . .17 2 Getting Started . . . . . . . . . . . . . . . . . . . .18 2.1 Insertion and Removal of the SIM Card . . . . . . . . . . . . . . . . .18 2.2 Installing the Battery . . . . . . . . . . . .20 2.3 Charging the Battery . . . . . . . . . . . .22 3 Turning the Phone On and Off . . . . . . .23 3.1 Turning the Phone On . . . . . . . . . . .23 3.2 Entering in the PIN . . . . . . . . . . . . .23 3.3 Turning the Phone Off . . . . . . . . . . .24 4 The Telephone . . . . . . . . . . . . . . . . . . . .25 4.1 Physical Description of the Telephone . . . . . . . . . . . . . . . . . .25 4.2 Menu Structure . . . . . . . . . . . . . . . .32 5 Making and Receiving Calls . . . . . . . . .35 5.1 How to Make a Call . . . . . . . . . . . . .35 5.2 How to End a Call . . . . . . . . . . . . . . .35 5.3 How to Answer an Incoming Call . .36 5.4Rejecting a Call . . . . . . . . . . . . . . . .36 5.5 Recalling the Most Recent Numbers . . . . . . . . . . . . . . . . . . . . . .36 6 Phone Book . . . . . . . . . . . . . . . . . . . . . . .37 6.1 Find and Call . . . . . . . . . . . . . . . . . .37 6.1.1 Alphabetic Search . . . . . . . . . .38 6.2 New Contact . . . . . . . . . . . . . . . . . . .38 6.3 Edit Contact . . . . . . . . . . . . . . . . . . .39 6.4 Delete Contact . . . . . . . . . . . . . . . . .40 6.5 Phone Book Status . . . . . . . . . . . . . .41 6.6 Special Numbers . . . . . . . . . . . . . . .41 TABLE OF CONTENTS 3 6.6.1 My Numbers . . . . . . . . . . . . . .41 6.6.2 Emergency Number . . . . . . . .42 6.6.3 Service Number . . . . . . . . . . .42 6.7 Copy Phone Book . . . . . . . . . . . . . . .42 7 Messages . . . . . . . . . . . . . . . . . . . . . . . .43 7.1 Send New Message . . . . . . . . . . . . .43 7.2 Unread Messages . . . . . . . . . . . . . . .44 7.3 Read Messages . . . . . . . . . . . . . . . .45 7.4 Sent Messages . . . . . . . . . . . . . . . . .45 7.5 Unsent Messages . . . . . . . . . . . . . . .46 7.6 Voice Mailbox . . . . . . . . . . . . . . . . . .46 7.7 Message Options . . . . . . . . . . . . . . .47 8Configuration . . . . . . . . . . . . . . . . . . . . .48 8.1Sounds and Alarms . . . . . . . . . . . . .48 8.1.1 Ring Volume . . . . . . . . . . . . . . .48 8.1.2 Vibrating Alert . . . . . . . . . . . . .48 8.1.3 Ringing Tones . . . . . . . . . . . . .49 8.1.4 Initial Tone . . . . . . . . . . . . . . . .49 8.1.5 Coverage Alert . . . . . . . . . . . . .49 8.2 Adjust Date and Time . . . . . . . . . . . .49 8.2.1 Set Time . . . . . . . . . . . . . . . . . .49 8.2.2 Changing the Hour Format . .50 8.2.3 Changing the Date . . . . . . . . .50 8.3 Locks . . . . . . . . . . . . . . . . . . . . . . . . .50 8.3.1 Lock the Card . . . . . . . . . . . . .50 8.3.2 Lock the Telephone . . . . . . . . .51 8.4 Voice Synthesis Configuration . . . . .51 8.4.1 Selecting the Speed of the Spoken Voice . . . . . . . . .52 8.4.2 Selecting the Pitch of the Spoken Voice . . . . . . . . .52 8.5 Versions . . . . . . . . . . . . . . . . . . . . . . .52 8.6 Factory Settings . . . . . . . . . . . . . . . .52 9 Call Information . . . . . . . . . . . . . . . . . . .53 9.1Call Information . . . . . . . . . . . . . . . .53 9.2 Call Log Memory . . . . . . . . . . . . . . .53 9.3 Clear Call List . . . . . . . . . . . . . . . . . .53 10 Manage Calls . . . . . . . . . . . . . . . . . . . . .54 10.1 My Number . . . . . . . . . . . . . . . . . . .54 10.2 Call Divert . . . . . . . . . . . . . . . . . . . .54 10.3 Call Barring . . . . . . . . . . . . . . . . . . .55 10.4 Call Waiting . . . . . . . . . . . . . . . . . . .57 4 11 Extras . . . . . . . . . . . . . . . . . . . . . . . . . . .58 11.1 Turning off the telephone . . . . . . . .58 12 Accesories . . . . . . . . . . . . . . . . . . . . . . . .59 13 FDA Statement . . . . . . . . . . . . . . . . . . . .60 14 Manufacturer ́s Limited Warranty . . . .68 INDEX OF FIGURES Insertion of the SIM Card . . . . . . . . . . . . . .19 Placement of the battery . . . . . . . . . . . . . . .20 Removing the battery . . . . . . . . . . . . . . . . .21 Front view of the owasys22C . . . . . . . . . . . .26 Side connectors on the owasys22C . . . . . .31 INDEX OF TABLES Alphanumeric keypad on the owasys22C . . . . . . . . . . . . . . . . . . . . . . .30 5 1 GENERAL INFORMATION The information contained in this user’s guide is written for the Owasys mobile phone model owasys22C in 2 different versions: GSM 900/1800 and GSM 850/1900. Export controls This product is sub…

Text truncated - open the document above for the full version.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 April 27, 2005 RE: 15.19 Statement (FCC ID: SJE13EASJE) TO WHOM IT MAY CONCERN The statement: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation” Is not placed in the label of the equipment due to the following reasons: - Type label is too small (No room for this writing). - Required text is already included in the user guide This statement is placed in a prominent location in the instruction manual. Please contact me if there is any information you may need. If you have any questions, please feel free to contact me at the address shown below. Sincerely, P.A. Mrs. Africa Hernández Development Engineer Owasys Advanced Wireless Devices, S.L. Parque Tecnologico, 207-B, E-48170 Zamudio (Vizcaya), SPAIN TEL: +34 946025323 E-mail: [email protected]

INSTRUCTIONS TCB SERVICE AGREEMENT For additional information on the TCB Program, contact MET Laboratories, Inc. at (410) 354-3300 or visit us at http://www.metlabs.com Enclosed is a copy of the MET TCB Service Agreement. Please complete the information on the Applicant and Manufacturer before making two copies of the agreement. The original and both copies of the agreement should be signed by your company and the product's manufacturer (if more than one manufacturer, additional agreements can be sent) before returning the executed original and copies of the agreement to MET. At the completion of the evaluation process for the product, fully executed copies of the agreement will be returned to your company and the manufacturer. The agreement allows MET access to the manufacturing facility during normal working hours to conduct any inspections that might be necessary to allow continued certification of the product. The agreement also indicates your intent to provide to MET Laboratories any product or information that might be required for reevaluation for continued surveillance. Additionally, the agreement specifies the conditions on how the product is to be identified as certified. This agreement in no way absolves the applicant or the manufacturer of any requirement or regulation of the Federal Communications Commission (FCC). 2 TCBF002 Rev.1MET Laboratories, Inc. TCB Service Agreement MET TCB SERVICE AGREEMENT THIS AGREEMENT is made at Baltimore, Maryland this 27 day of April 05 , 20 , by and between MET LABORATORIES, INC. (hereinafter referred to as MET) and the following: Applicant : Owasys Advanced Wireless Devices, S.L. Address : Parque Tecnologico, 207-B, E-48170 Zamudio (Vizcaya), SPAIN (Hereinafter referred to as the "Applicant") Manufacturer : (required for Part 68 only) Address : (Hereinafter referred to as the "Manufacturer") Only the product(s) designed and engineered by the Applicant and manufactured by the Manufacturer at the Manufacturer's facility at the above address, which have been certified by MET are covered by this service Agreement. NOW, THEREFORE, in consideration of the premises set forth in this agreement, the above mentioned parties agree that; Upon successful evaluation, MET will issue the Applicant a Grant of Equipment Authorization Certificate, granting the Applicant permission to market the certified product(s). At a minimum the product's identification plate or label will include the FCC ID Number or the Registration/Certification Number as well as any other information as might be required by statute. The FCC requires that MET perform post-certification surveillance. Surveillance for continued certification compliance can be accomplished by, one or all of the following methods depending on the specific FCC requirement and as notified by MET Labs; the Applicant providing recent test data as proof of continued compliance for production models of the product to MET at MET’s request, the applicant may either have MET perform the continued compliance testing, or provide test data from other locations as approved by MET for the purpose of compliance testing, or the Manufacturer agrees to allow free and unrestricted access to the Manufacturer's facility upon reasonable notice during normal working hours for the purpose of product review, or the Applicant or Manufacturer agrees to provide and deliver to MET or locations approved by MET models of the certified product at MET’s request. All costs associated with testing of the device will be borne by the Applicant or the Manufacturer and paid within 30 days of notice. If required the Applicant agrees to provide to MET for MET review certain identified technical documents or quality documents that provide for a review of product update and compliance. Acceptable Markings are found in 47 CFR 2.925, 2.926, 15.19, and part 68.300. Only products visually bearing the appropriate FCC identification label and identified as to model and type will be acknowledged as being an authorized product. The Applicant is responsible for applying the label to the product in accordance with current FCC requirements. An Applicant is required to submit to MET a sample of the label or plate showing the FCC ID Number or the Registration/Certification Number for approval prior to applying to the product. The Applicant is required to submit to MET a label location drawing or photograph showing the location of the mark on the product. Any reference to MET certification shall not be permitted on any non-eligible product(s), packaging, or literature. If the Applicant or the Manufacturer applies the FCC identification label to unauthorized products, then the Applicant and the Manufacturer shall save, indemnify, and hold harmless MET LABORATORIES, 3 TCBF002 Rev.1MET Laboratories, Inc. TCB Service Agreement INC. from any and all claims which may arise out of said unauthorized action. The label and/or references to MET are permitted on promotional, advertising, and packaging of Certified Product(s) provided that misrepresentation of results of the marking process and/or this agreement do not occur. Final judgment in the suitability of use of the label or the MET Laboratories name is reserved by MET. The Applicant shall maintain or require the manufacturer to maintain a record of all complaints made known to them relating to the product's compliance with the requirements of the relevant standard and agrees to make these records available to MET upon reasonable request. The applicant agrees to take appropriate action, or have the manufacturer take appropriate action with respect of such complaints and/or any deficiencies found in products or services that affect compliance with the requirements for certification. Compliance with all requirements and stipulations of the Certification Program and this agreement between MET and the Applicant is required for program compliance. Non-compliance with all or part of this agreement may result in termination o…

Text truncated - open the document above for the full version.

May 18, 2005 Wavecom Inc., hereby authorizes Cetecom to refer to Wavecom’s Q2426-SK certification documents, FCCID O9EQ2426-SK, solely for the purpose of enabling Cetecom to conduct Owasys FCC and PTCRB testing and certification process for the products: Owasys 22C This includes the Q2426-SK test report, the detailed results, the use of "Wavecom", the use of Q2426-SK name, and the use of Wavecom’s approved OS version. Such use of “Wavecom” and the Q2426-SK names shall be limited solely for the purpose of conducting the FCC and PTCRB testing and certification process. Sincerely, Gulmit Sobti Certification Manager

Authorisation letter We, Owasys Advanced Wireless Devices, S.L. Parque Tecnológico, 207-B, E-48170 Zamudio (Vizcaya) SPAIN authorise Cetecom S.A. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 29590 Campanillas – Málaga Spain to act as our agent and to process and sign on our behalf for all approval activities in the United States of America. This authorisation is applicable to the product: Type of equipment: Dual band GSM/GPRS (class 8): 850/1900 mobile phone Brand name: Owasys Model: owasys22C FCC ID: SJE13EASJE Signed on behalf of Owasys Advanced Wireless Devices, S.L. by Name: Africa Hernández Antón Date: April 15 th , 2005 Place: Zamudio (Vizcaya) Signature and company stamp

attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: LETTER OF AGENT AUTHORIZATION April 27, 2005 To Whom It May Concern: We, the undersigned, hereby authorize MET Laboratories, Inc. to act on our behalf in all matters relating to application for equipment authorization (FCC ID: SJE13EASJE), including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, P.A. Mrs. Africa Hernández Development Engineer Owasys Advanced Wireless Devices, S.L. Parque Tecnologico, 207-B, E-48170 Zamudio (Vizcaya), SPAIN TEL: +34 946025323 E-mail: [email protected]

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 May 6, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Owasys Advanced Wireless Devices, S.L. requests confidentiality for the following products: FCC ID Number Product Title/Model SJE13EASJE Dual band GSM/GPRS (class 8): 850/1900 mobile phone/owasys22C O9EQ2426- SK GSM/GPRS Starter Kit Q2426B/Q2426 For the products stated above, we request that the following information be held confidential: FCC ID Number Product Title/Model SJE13EASJE Dual band GSM/GPRS (class 8): 850/1900 mobile phone/owasys22C 1) Circuit diagrams 2) Block Diagrams 3) Bill of materials 4) Operational Description 5) Tune up information 6) Antenna specifications FCC ID Number Product Title/Model O9EQ2426- SK GSM/GPRS Starter Kit Q2426B 1) Circuit diagrams 2) Bill of materials No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Owasys Advanced Wireless Devices, S.L., Fractus S.A. and Wavecom SA trade secrets and proprietary information that could be of benefit to our competitors. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Africa Hernández Antón P.A. Date: May 6, 2005 Place: Zamudio (Vizcaya) Signature and company stamp

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 May 20, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Owasys Advanced Wireless Devices, S.L. requests confidentiality for the following product: FCC ID Number Product Title/Model O9EQ2426-SK GSM/GPRS Starter Kit Q2426B/Q2426 For the products stated above, we request that the following information be held confidential: 1) Circuit diagrams 2) Bill of materials The above exhibits contain Wavecom SA trade secrets and proprietary information that could be of benefit to their competitors. This material is not customarily available to the general public or other companies and we request that it be withheld from public or other companies, including Owasys Advanced Wireless Devices, S.L., inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Africa Hernández Antón P.A. Date: May 19, 2005 Place: Zamudio (Vizcaya) Signature and company stamp

DOC-FCC009 4/14/2005 Page 1 of 3 FEDERAL COMMUNICATIONS COMMISSION - FCC FORM 731 APPLICATION FOR EQUIPMENT AUTHORIZATION Approved by OMB 3060 - 0934 Expires 02/28/2005 Item 1. Applicant's complete, legal business name: Owasys Advanced Wireless Devices, S.L. Item 2. Applicant's mailing address Line 1: Parque Tecnológico, 207-B Line 2: P.O.Box: City: Zamudio State: Vizcaya Country (if foreign address): Spain Zip/Postal Code: E-48170 Item 3. FCC ID: SJE13EASJE Grantee code: SJE Equipment Product Code (14 characters maximum): 13EASJE Item 4. Person at the applicant's address to receive grant or for contact: First Name: Mail Stop: Last Name: Telephone: Ext: Title: E-mail: Fax No: Item 5. Instead of Applicant, the original Grant is authorized to be mailed to: Centro de Tecnología de las Comunicaciones S.A. (CETECOM) Paque Tecnologico de Andalucía Severo Ochoa 2 E-29590 Campanillas, Málaga SPAIN ATTN: Ricardo Orejas Phone: +34952619317 Fax: +34952619113 E-mail: [email protected] Item 6. Technical Contact: Firm Name: Owasys Advanced Wireless Devices, S.L. Telephone: +34 946025323 Ext: Fax No: +34 946025353 First Name: Africa Middle Initial: Last Name: Hernández Address Line 1: Parque Tecnológico, 207-B P.O.Box: Address Line 2: City: Zamudio Country (if foreign address): Spain Zip/Postal Code: E-48170 E-mail: [email protected] Item 7. Non-Technical Contact: Firm Name: Owasys Advanced Wireless Devices, S.L. Telephone: +34 946025323 Ext: Fax No: +34 946025353 First Name: Africa Middle Initial: Last Name: Hernández Address Line 1: Parque Tecnológico, 207-B P.O.Box: Address Line 2: City: Zamudio Country (if foreign address): Spain Zip/Postal Code: E-48170 E-mail: [email protected] Item 8. * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules? If "Yes" see instructions. (please mark as appropriate) X Yes Ο No Item 9. Does the applicant request that the Commission defer grant of this application pursuant 47 CFR § 0.457(d)(1)(ii)? (See instructions) NO If so, specify date when grant may be issued (MM/DD/YYYY format): Item 10. * Equipment Class: PCE Licensed transmitter * Description of Product as it is Marketed: Dual band GSM/GPRS (class 8): 850/1900 mobile phone (NOTE: This text will appear below the equipment class on the grant) Item 11. * Application is for: (please mark as appropriate) X Original Equipment (See instructions) Ο Change in identification of presently authorized equipment: Original FCC ID: Grant Date (MM/DD/YYYY format): Ο Class II permissive change or modification of presently authorized equipment (See instructions) DOC-FCC009 4/14/2005 Page 2 of 3 Item 12. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? If either of the above questions is answered "Yes" complete section 12(c). Ο Yes X No Ο Yes X No (c) The related application: Ο has been granted under the FCC ID listed to the right Ο is in the process of being filed under the FCC ID listed to the right Ο is pending with the FCC under the FCC ID listed to the right FCC ID Item 13. Name of test firm and contact person on file with the FCC, if different from applicant or contact person: Firm Name: Centro de Tecnologia de las Comunicaciones S.A. Last Name: Telephone +34952619100 Ext Fax No. +3495261913 E-mail: [email protected] Item 14. Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization. Read each certification carefully before answering and signing this application Equipment Specifications: Rule Part Frequency Range (MHz) Power (W) Frequency Tolerance and Units Emission Designator Note Codes 22H 824.2 - 848.8 1.95 1.0 PM 247KGXW 24E 1850.2 - 1909.8 0.99 1.0 PM 243KGXW WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTITUTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503). Item 15. *SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION: The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? X Yes Ο No Item 16. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. IN accepting a Grant of Equipment Authorization issued by the FCC as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes i…

Text truncated - open the document above for the full version.