SOBSASF2-RF4201USB RF PR0 GRIP

Operation Manual of USB-2222 USB 2.4GHz RF Controller 1. Brief Introduction Thank you for purchasing our USB 2.4GHz RF controller. This controller is composed of Receiver and RF Controller with 4 axis and 12 fire buttons. this product supports Windows98/ME/2000/XP and has passed the Test of USB Telecommunication Protocol. 2. Feature z 4 axis and 12 fire buttons. 1 POV under the default interface of Windows system: X axis / Y axis Z axis Rz axis POV z USB 1.1 Port, compatible with USB2.0, plug and play type z Support Direct7.0A version and up, support most of dual vibration function z 2.4GHz RF Technology z Force connection function z Key off and motor on function z Low power consumption: For USB receiver, the load current < 15mA For RF controller (no vibration condition), the load current < 10mA z Support sleeping and awakening function, the load current for RF controller under sleeping condition < 0.4mA z LED indicator z TURBO LED indicator z Turbo speed adjustable z LED indicator & motor power off automatically under low voltage condition 3. Function description: 1). The connection of USB-2222G wireless controller and its installation of driving program: Program installation under Windows98/Me/Window2000/WinXP a). Enter Windows Insert disc Double click “SETUP”, and install the driving program as PC indicates. b). Start Control Panel Game Controller; c).Insert the plug of USB Receiver into PC USB port install the driving program as PC indicates PC will find out “Wireless USB Joystick” driving program automatically Attribute 2). RF Controller’s connection: a). Connect the USB Receiver with PC b). After loading the “RF controller” batteries, turn on the power switch, the controller and the receiver will connect automatically, thus the USB Receiver’s LED light is always on. c)..If the RF controller can’t be connected automatically when it is used for the first time, then press FC key to make “USB Receiver” come into force connection status, at this moment, the LED light of USB Receiver is on fast flashing, press and hold the controller’s key 9+key 11 simultaneously to make a re-matching for the controller. + 1 2 3 4 5 67 8 9 10 11 12 3). Turbo operation: a). Key from 1 to 8 can be separately set as Turbo key.: Press and hold “Turbo + digital key”, the pressed key bears Turbo function. Press “clear + digital key” if you want to clear up the digital key’s turbo function, the key’s Turbo status information will be saved in the USB Receiver, once the USB Receiver has no electricity, the key’s Turbo status information will be lost. b). 3 kinds of speed-adjusting functions: Press “Turbo + key 10” to change the Turbo speed. 4). Sleeping and awakening : As the controller’s power supply is from battery, in order to extend the battery life as far as possible, the controller will have no any key within 3 minutes and the 3D rocker has no wide range movement, then the controller will enter into sleeping status to save power. During sleeping, press any key to awaken it up , but the rocker can’t wake up the controller. 5). Motor on & off function: Select key “ 9+12” to shut off the motor’s vibration function and press again the key “9+12” to start the motor’s vibration function. 6). Low voltage detecting: The the battery’s voltage is lower than 3.2V, ,the Link LED and Turbo LED will flash simultaneously, and will automatically estimate the motor to save battery. 7). Automatic calibration: Shaking the left and right 3D rocker in a wide range can calibrate it automatically. 4. Batteries Installation 5. Keystroke Layout: 6. Troubleshooting 1.) The controller still can’t work after installing the software and hardware . z Check whether the controller cable is strongly connected to PC; z Make sure that the indication of the option “Game Port Controller” in the “Game Controller” in menu “Control Panel” is “Confirmation”, and “Controller ID” shows “1”. z Make sure that controller’s I/O setting value has no conflict with the other peripheral setting. z Restar PC if the controller still cannot work. 2.) The”Wireless USB Joystick” driving program can’t be installed or there is no response while testing the controller after installation. z DirectX Version is too low. A version of DirectX 7.0 or up is required 3.) There is no vibration from motor while playing racing games. z Exit the game and reenter it.( Do not draw or plug the USB controller during the game operation ) z If it still cannot work normally, restart your PC. 4.) Some analog axis can go into effect automatically after entering into the games. z Does the controller has no calibration or or has not been confirmed after calibrations. ? z Enter Option Controllers Dead Zone to adjust the range of the dead zone to keep the axis within the range of dead zone. Function Zone Dead Zone Function Zone Axis Axis 5.) The motor keeps on vibrating while playing the games. z Enter FORCE FEEDBACK and turn down or turn off the engine. Engine 6.) The intensity of the motor vibration becomes weak after entering the games. z Enter FORCE FEEDBACK and adjust the intensity of STICK VOLUME and ROAD EFFECTS to be stronger. 7.) You feel it difficult to make the corrections on testing platform. z Press “Default” first, and then press “Set”. 8.) There is no vibration from motor on testing platform. z DirectX Version is too low. A version of DirectX 7.0 or up is required. 9.) No controller driving program can be found after plug the controller. into PC. z When windows requires to specify some file path during the previous Driver installation, it jumped over the file or specified wrong files. z Solution: after inserting the device, delete the devices such as “man-machine port equipment” ,“Somatological Input Equipment”, “Hidclass” or the corresponding controller’s devices with exclamation mark under the menu of” sound, video and game controller “ , then re-insert the controller and you’ll find its driving program. 10.) Does driver fails to install ? z Install it by copying the drive…

Text truncated - open the document above for the full version.

REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 2 EXTERNAL OF EUT REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Front View of EUT Back View of EUT REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Top View of EUT Bottom View of EUT

REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 3 INTERNAL OF EUT REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Open View of EUT Internal of EUT – 1 REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Internal of EUT – 2 Internal of EUT – 3 REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Internal of EUT – 4

Wireless Gamepad for PC Theory of Operation 08/20/2004 . 1. Dongle Side Radio The radio system is mainly composed of three parts: radio modem, frequency synthesizer and baseband microprocessor. The radio is interfaced with PC via a 4-pin connector. PC sends a command to the radio every 16 milliseconds. The radio takes the data from PC, packetize the data by adding preambles, frame information, and error checking bytes. The packetized frame is transmitted to the wireless gamepad. When gamepad replies, this radio receives the data, un-packetize it, and sends to PC. The radio modem is a FSK modem running at 250 kbps with GFSK encoding to avoid frequency drifting. Frequency is controlled by a frequency synthesizer which adjusts a voltage-controlled RF oscillator dynamically for accurate frequency management. A total of 79 channels can be selected conversing the frequency range of 2.402 – 2.480GHz. The antenna is an embedded PCB antenna matching is done by using lumped inductors and capacitors. The radio is a half-duplex system and is powered by a 5V -> 3.3V regulator, power source provided by PC. The total average power consumption of the radio system is about 25 mA at 3.3V. 2. Gamepad Side Radio Gamepad side radio operates in similar way to Dongle Side Radio as described in previous section. A total of 79 channels can be selected conversing the frequency range of 2.402 – 2.480GHz.. It scans keystrokes on the gamepad. Similarly, the data is packetized in the same way as Station Side Radio. The joypad radio is powered by 4-AAA size batteries and down regulated to 3.0V. Another provides power for two vibration motors in the gamepad.

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 10-Oct-2003 Sheet of File: E:\My Work\ProtelWork\PSII(NordIC).ddb Drawn By: CE 1 DR2 2 CLK2 3 DOUT2 4 CS 5 DR1 6 CLK1 7 DATA 8 DVDD 9 VSS 10 XC2 11 XC1 12 VDD_PA 13 ANT1 14 ANT2 15 VSS_PA 16 VDD 17 VSS 18 IREF 19 VSS 20 VDD 21 VSS 22 PWR_UP 23 VDD 24 U1NRF2401 DATA 2 CLK1 3 DR1 4 CS 5 DOUT2 6 CLK2 7 DR2 8 CE 9 PWR_UP 10 VDD 11 GND 12 GND 1 J1NRF2401_PORT VCC Y116M R11M C122pF C222pF C733nF C610nF C51nF VCC R222K L13.6nHL222nH C42.2nF C322pF C91.0pFC81.0pF C101.5pF RF I/O C11*4.7uF nRF2401 RF module 1.0aQiulin RF , PROTEL PCB , nAN24-01rev1_1.pdf Single end connection to 50o antenna, , ,. . PCB-quarterwave-2_4GHz-dipole-feb03.pdf,N ote: 1. C11 Gerber file ; 2. L1,L2 2.7GHz ; 3. C8,C9,C10 ; 4. J1 12Pin ; 5. Module 25mm, GND ; 6. Gerber file . Gerber file . Gerber file: nRF2401_single_netw_0603_1-1.zip

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 8-Mar-2004 Sheet of File: E:\My Work\ProtelWork\PSII(NordIC).ddb Drawn By: VCC Q101S8550 VCC A -+ Left Motor Q18050 Vbat R11133* R1122.7K D14148 C9 104 A -+ Right Motor Q28050 R11333* R1142.7K D24148 C14104 Vbat C104 103 LEFT_MOTOR LEFT_MOTOR 123456789 1011121314151617181920 J2Writer-20PIN VPPD0D1D2D3D4D5D6D7 VCC CECLKOEPGMRST VPP Y112M C102 22P C103 22P CLK C1014.7uF R1012.7K VCC CE D0D1D2D3 PGM OE VCC R104 10KR105 10KR106 10K GND 1 VIN 2 VOUT 3 U2HT7530 VCC P1Battery C201100uF C203104 C20247uF VCC C105104 RST USB 2.4GHz RF Gamepad(EEPROM only) 3.0aQiulin R10710K R10810K R1152.7K RY100K RX100K LY100K LX100K 1 VPP 2 P0.0/INT0 3 P0.1/INT1 4 P0.2/INT2 5 RST 6 P1.5 7 P1.4 8 P1.3 9 VDD 10 P1.2 11 P1.1 12 P1.0 13 P2.0 14 P2.1 15 P2.2 16 P2.3 17 VSS 18 AVSS 19 P4.7/AIN7 20 P4.6/AIN6 21 P4.5/AIN5 22 P4.4/AIN4 23 P4.3/AIN3 24 P4.2/AIN2 25 P4.1/AIN1 26 P4.0/AIN0 27 AVREF 28 VDD/AVDD 29 DAO 30 P5.7 31 P5.6 32 P5.5 33 P5.4/TC0/PWM0 34 P5.3/TC1/PWM1 35 P5.2/SO 36 P5.1/SI 37 P5.0/SCK 38 P2.4 39 P2.5 40 P2.6 41 P2.7 42 VSS 43 XOUT 44 XIN U1IC1 VCC D4 D5 D6 D7 QFP44 DIE Vbat ADC_VREF ADC_VREF Up-GND Right-VDD DATA 2 CLK1 3 DR1 4 CS 5 DOUT2 6 CLK2 7 DR2 8 CE 9 PWR_UP 10 VDD 11 GND 12 GND 1 J1NRF2401_PORT VCC RF Module K312 K410 K57K65K7UpK8LeftK9DownK10Right K114 K123 K17ClearK18Turbo LED1 Turbo LED R1021K VCC LED2 Link LED R1031K VCC K19 K211 K132 K141 K156 K168 R11010k R10910k VCC 1.5V*4 LVD_C Q201S9012 R2013.9K R20220K R20339K LVD Vbat Q202S8050 R204100K R2052.7K LVD_C LVD D3 4148 D4 4148 D5 4148 D6 4148 D7 4148 D8 4148 CS 1 CLK 2 DI 3 DO 4 VSS 5 ORG 6 NC 7 VCC 8 U30093LC46 R30110K VCC C301104P 1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 20-Aug-2004 Sheet of File: E:\My Work\ProtelWork\RF gamepad.ddb Drawn By: P0.0 1 P0.1 2 P0.2 3 P0.3 4 P1.0 5 VSS 6 VPP 7 Vreg/P2.0 8 P2.1 9 P2.2 10 VCC 11 D- 12 D+ 13 P1.1 14 P0.7 15 P0.6 16 P0.5 17 P0.4 18 U100CY7C63231A R101 22K R102 22K R103 22K R104 22K R105 22K R106 22K R10733K R10833K R10933K R11033K R11133K R11233K 1234 J101USB Plug R1181.3K R1191K D100Indicator V5 C202100nF C201100nF VCC C1024.7uF C10110nF nRF2401 USB Dongle with CY7C63231A 1.4Qiulin VCC R113 100K R114 100K R115 100K C103104 DATA 2 CLK1 3 DR1 4 CS 5 DOUT2 6 CLK2 7 DR2 8 CE 9 PWR_UP 10 VDD 11 GND 12 GND 1 J1NRF2401_PORT VCC RF Module R12010K R12110K V5 V5 3.3V , 100mA S101FC(Force Connect) GND 1 VIN 2 VOUT 3 U200HT7533 V5

REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 Page: 1 of 25 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: USB RF PR0 GRIP Brand Name: ASIAN GAMES Model Name: SF2-RF4201 FCC ID: SOBSASF2-RF4201 Report No.: ER/2004/90005 Issue Date: Nov. 08, 2004 FCC Rule Part: 15.249 Prepared for ASIAN GAMES CORP. 8F-7,No. 14, Lane 609, Sec. 5, Chung Hsin Rd., San Chung City, Taipei Hsien, Taiwan, R.O.C. Prepared by SGS Taiwan Ltd. No. 134, Wu Kun g Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA VERIFICATION OF COMPLIANCE Applicant: ASIAN GAMES CORP. 8F-7,No. 14, Lane 609, Sec. 5, Chung Hsin Rd., San Chung City, Taipei Hsien, Taiwan, R.O.C. Product Description: USB RF PR0 GRIP Brand Name: ASIAN GAMES FCC ID Number: SOBSASF2-RF4201 Model No.: SF2-RF4201 Model Difference: N/A File Number: ER/2004/90005 Date of Receive: Sep. 16, 2004 Date of test: Sep. 17, ~ Oct. 01, 2004 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2001) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.249. The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 08, 2004 Sky Wang Approved By Date Nov. 08, 2004 Vincent Su REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Version Version No. Date 00 Nov. 08, 2004 REPORT NO: ER/2004/90005 ID: SOBSASF2-RF4201 DATE: Nov. 08, 2004 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Table of Contents 1. GENERAL INFORMATION ................................................................................................5 1.1 PRODUCT DESCRIPTION.........................................................................................................................5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................................5 1.3 TEST METHODOLOGY.............................................................................................................................5 1.4 TEST FACILITY.......................................................................................................................................5 1.5 SPECIAL ACCESSORIES...........................................................................................................................5 1.6 EQUIPMENT MODIFICATIONS.................................................................................................................5 2. SYSTEM TEST CONFIGURATION ...................................................................................6 2.1 EUT CONFIGURATION............................................................................................................................6 2.2 EUT EXERCISE.......................................................................................................................................6 2.3 TEST PROCEDURE...................................................................................................................................6 2.4 LIMITATION............................................................................................................................................7 2.5 CONFIGURATION OF TESTED SYSTEM....................................................................................................9 3. SUMMARY OF TEST RESULTS ......................................................................................10 4. CONDUCTED EMISSIONS TEST (NOT APPLICABLE IN THIS REPORT)............11 4.1 MEASUREMENT PROCEDURE: ..............................................................................................................11 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................11 4.3 MEASUREMENT EQUIPMENT USED: .....................................................................................................11 4.4 MEASUREMENT RESULT: .......................................…

Text truncated - open the document above for the full version.