SOBSASF2-RF4605XBOX RF Kids Grip

User manual of XBOX RF JOYPAD 1.) Connect power of XBOX console, TV and AV cable correctly, insert the receiver of RF JOYPAD into port of XBOX console. Then turn on the power and hold down the switch at side of joypad to “ON” position. 2.) Here, RF JOYPAD begin work, receiver of RF joypad begin checking transmitted ID signal. If the receiver can be checked the ID signal, then indicator light of the receiver will on ; if the receiver can not checked the signal or signal is very weakly, then indicator light of receiver will flash.(if a lot of RF JOYPAD used at the same time, RF JOYPAND and receiver can be automatic checked, automatic distributed, that is to say, a RF JOYPAD corresponding with a receiver and don’t disturb each other. when you draw off the receiver, the original record lost, when you turn on the power again, they will be redistribute ID 3.) BACK key have exit function, START key have begin play function. 4.) Function key A, B, X, Y WHITE , BLACK,LT, RT key are main function keys ,there are different functions in other play. 5.) “+” key at the left of Joypad have up, down, left and right directional select function. 6.) L key have turn left function, R key have turn right function. However, there are different in other play 7.) Left and right sticks (3D) regards as directional control keys 8.) Green LED at the left of RF receiver is receiver indicator light (when it receive the signals, it is on, otherwise, it is flash).red LED at the right of RF receiver is power indicator light. 9.) When you need copy play, you only insert the XBOX memory card into RF receiver and go on . 10.) Vibration intensity control: At the left bottom of joypad have a vibration switch, it can be adjust vibration intensity. OFF is close vibration, middle position (100) is normal vibration, right position (125) is strong vibration. 11.) MACRO is programme, in some of games, several of skills need two or three keys combinatorial to finish. You only kept the skills into the JOYPAD at the beginning after used the “MACRO” function. When you play the game next time ,you only press the enactive key(L2,R2,L3,R3),then it can issue the skills function. A. SETTING MACRO 1.) When you press the MACRO key, the red light LED will on. 2.) Press setting key, for example LT key (only LT, RT, WHITE, BALCK keys can be setting MACRO function), Here, red LED of MACRO will flash. 3.) Press function keys and setting to enact key (a set of MACRO can be setting 15 function keys, press the several of key at the same time, record one times, and it will be automatic keep record and exit after 15 times. 4.) If you setting less 15 keys, and want to exit, you can only re-press MACRO key. B. CANCEL MACRO 1.) Press MACRO 2.) Press setting key (LT or RT) 3.) Press MACRO key, can be cancel the MACRO function C. SETTING THE SPEED OF MACRO Speed of action: 0.03 seconds and 0.1 second. Ways of setting as follows: Fast motion: press MACRO press up key (indicator of MACRO will be curst out after flash 6 times) Slow motion: Press MACRO press down key (indicator of MACRO will be curst out after flash 3 times) For example: in some of games, the skill is to combination down, right-down, right, down, right-down, right, RT,RT, RT.Then the step of setting as below (setting key is LT, speed is fast): 1.)MARCO key UP key MARCO key (setting speed) 2.)MARCO LT DOWN RIGHT DOWN RIGHT DOWN RIGHT DOWN RIGHT RT BLACK RT BLACK RT MACRO key. The LT have skill function when you set by above step. P.S: (1.) Only LT, RT, BLACK and BLACK keys can be setting MACRO function, and original function will be lost after setting MARCO. (2.) A set of MARCO can be setting 15 function keys more. (press the function keys at the same time will be record one time) (3.) In the MACRO setting, BLACK,START do separator key to separate two of same action. (4.) when setting MARCO, regard the action as the biggest force. (5.) Setting MARCO have memory function if you shut off power 12.) Turbo operation: TURBO is speedup key a.) Turbo ON/OFF Press Turbo and functions key, this key will come into Turbo estate, if you press Turbo and functions key again, you will cancel Turbo function of this key b.) Speed of Turbo Press TURBO and START key to change the speed of TURBO, there are three speed of Turbo, when you press the Turbo and Start , then change one time speed. 13.) CLEAR operation: CLEAR is cleanup key, if you clear the TURBO function of setting key , you only press the setting key and CLEAR key, it can be clear the TURBO function. 14.) SLEEPING and WAKENING: Because the JOYPAD adopt battery power supply, so in order to prolong longevity of service, joypad will be enter sleep state in the 2 minutes without press any keys, In the sleep state, press any key (BLACK, START, L, R, CROSS KEY LT, RT, A, B , X, Y, WHITE, BLACK, TURBO, SLOW )can be waken joypad after 3 seconds, but Stick did not waken joypad. Federal Communications Commission(FCC) Statement This Equipment has been tested and found to comply with the limits for FCC, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You ar…

Text truncated - open the document above for the full version.

1.Dlngle side 2.Controllet side XBOX 2.4G Wireless Gamepad Diagram 3.3v XBOX SPI bus Cypress Cy7c65113 NordIC nRF2401 SPI 12MHz Crystal 16MHz Crystal PCB embedded antenna 4-AAA Size battery SONIX Sn8p1707 NordIC nRF2401 SPI PCB embedded antenna 3.0V Regulator Motors Buttons Joysticks

REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 2 EXTERNAL OF EUT REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Front View of EUT Back View of EUT REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Top View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: ASIAN GAMES CORP. FCC ID: SOBSASF2-RF4605 FCC ID: SOBSASF2-RF4605 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 3 INTERNAL OF EUT REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Open View of EUT Internal of EUT – 1 REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Internal of EUT – 2 Internal of EUT – 3 REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Internal of EUT – 4

Wireless Gamepad for XBOX Theory of Operation . The radio system is mainly composed of three parts: radio modem, frequency synthesizer and baseband microprocessor.. The packetized frame is transmitted to the wireless gamepad. When gamepad replies, this radio receives the data, un-packetize it. The radio modem is a FSK modem running at 250 kbps with GFSK encoding to avoid frequency drifting. Frequency is controlled by a frequency synthesizer which adjusts a voltage-controlled RF oscillator dynamically for accurate frequency management. A total of 79 channels can be selected conversing the frequency range of 2.402 – 2.480GHz. The antenna is an embedded PCB antenna matching is done by using lumped inductors and capacitors. The radio is a half-duplex system and powered by 4-AAA size batteries. The total average power consumption of the radio system is about 25 mA at 3.3V.

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 10-Oct-2003 Sheet of File: E:\My Work\ProtelWork\PSII(NordIC).ddb Drawn By: CE 1 DR2 2 CLK2 3 DOUT2 4 CS 5 DR1 6 CLK1 7 DATA 8 DVDD 9 VSS 10 XC2 11 XC1 12 VDD_PA 13 ANT1 14 ANT2 15 VSS_PA 16 VDD 17 VSS 18 IREF 19 VSS 20 VDD 21 VSS 22 PWR_UP 23 VDD 24 U1NRF2401 DATA 2 CLK1 3 DR1 4 CS 5 DOUT2 6 CLK2 7 DR2 8 CE 9 PWR_UP 10 VDD 11 GND 12 GND 1 J1NRF2401_PORT VCC Y116M R11M C122pF C222pF C733nF C610nF C51nF VCC R222K L13.6nHL222nH C42.2nF C322pF C91.0pFC81.0pF C101.5pF RF I/O C11*4.7uF nRF2401 RF module 1.0aQiulin RF , PROTEL PCB , nAN24-01rev1_1.pdf Single end connection to 50o antenna, , ,. . PCB-quarterwave-2_4GHz-dipole-feb03.pdf,N ote: 1. C11 Gerber file ; 2. L1,L2 2.7GHz ; 3. C8,C9,C10 ; 4. J1 12Pin ; 5. Module 25mm, GND ; 6. Gerber file . Gerber file . Gerber file: nRF2401_single_netw_0603_1-1.zip

REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 Page: 1 of 31 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: XBOX RF Kids Grip Brand Name: ASIAN GAMES Model Name: SF2-RF4605 FCC ID: SOBSASF2-RF4605 Report No.: ER/2004/B0016 Issue Date: Nov. 25, 2004 FCC Rule Part: 15.249 Prepared for ASIAN GAMES CORP. 8F-7,No. 14, Lane 609, Sec. 5, Chung Hsin Rd., San Chung City, Taipei Hsien, Taiwan, R.O.C. Prepared by SGS Taiwan Ltd. No. 134, Wu Kun g Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA VERIFICATION OF COMPLIANCE Applicant: ASIAN GAMES CORP. 8F-7,No. 14, Lane 609, Sec. 5, Chung Hsin Rd., San Chung City, Taipei Hsien, Taiwan, R.O.C. Product Description: XBOX RF Kids Grip Brand Name: ASIAN GAMES FCC ID Number: SOBSASF2-RF4605 Model No.: SF2-RF4605 Model Difference: N/A File Number: ER/2004/B0016 Date of Receive: Nov. 01, 2004 Date of test: Nov. 01, ~Nov. 23, 2004 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.249. The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 25, 2004 Sky Wang Approved By Date Nov. 25, 2004 Vincent Su REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Version Version No. Date 00 Nov. 25, 2004 REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Table of Contents 1. GENERAL INFORMATION ................................................................................................5 1.1 PRODUCT DESCRIPTION.........................................................................................................................5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................................5 1.3 TEST METHODOLOGY.............................................................................................................................5 1.4 TEST FACILITY.......................................................................................................................................5 1.5 SPECIAL ACCESSORIES...........................................................................................................................5 1.6 EQUIPMENT MODIFICATIONS.................................................................................................................5 2. SYSTEM TEST CONFIGURATION ...................................................................................6 2.1 EUT CONFIGURATION............................................................................................................................6 2.2 EUT EXERCISE.......................................................................................................................................6 2.3 TEST PROCEDURE...................................................................................................................................6 2.4 LIMITATION............................................................................................................................................7 2.5 CONFIGURATION OF TESTED SYSTEM....................................................................................................9 3. SUMMARY OF TEST RESULTS ......................................................................................10 4. CONDUCTED EMISSIONS TEST (NOT APPLICABLE IN THIS REPORT)............11 4.1 MEASUREMENT PROCEDURE: ..............................................................................................................11 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................11 4.3 MEASUREMENT EQUIPMENT USED: .....................................................................................................11 4.4 MEASUREMENT RESULT: ....................................…

Text truncated - open the document above for the full version.

REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 1 PHOTOGRAPHS OF SET UP REPORT NO: ER/2004/B0016 ID: SOBSASF2-RF4605 DATE: Nov. 25, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Radiated Emission Setup Photos