SPI-4XXKPMRELECTRONIC NETWORK DOOR LOCKING EQUIPMENT

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Installation Guide(s) A7763A 10/04 Installation Instructions For Profile Series Hardwired Networked v.S1 Cylindrical Lock Table of Contents This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced TV technician for help This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme avec la norme NMB-003 du Canada. Warning 1 Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning General Description.....................................................1 Specifications ............................................................1 Features ..................................................................1 Parts Breakdown .......................................................2-3 Installation Instructions ...............................................4-9 Operational Check ......................................................10 1 2 3 4 5 6 7 Page Warning ! To comply with “Fire Listed” doors, battery operated units must be replaced with alkaline batteries only. For installation assistance, contact SARGENT at 800-810-WIRE (9473) 1 For installation assistance, contact SARGENT at 800-810-WIRE (9473) The SARGENT Profile Series v.S1 Keypad Cylindrical Lock is designed for areas which require stand alone authorized entry. It is a self-contained microprocessor-controlled keypad with non-volatile memory. The keypad will hold a total of 2000 (S1-LU, S1-PK, S1-PA) different user codes. This product is operated by six (6) “AA” alkaline batteries or by the SARGENT 3267 9VDC power supply. General Description 2 Specifications • Latch – 1/2" standard 3/4" throw fire-rated double doors (optional) (41- prefix) • Deadlocking latch • Outside lever controlled by keypad, or key retracts latch • Inside lever retracts latch • Locks furnished for 1-3/4" doors only • U.L. Listed Features • Non volatile memory • Motor driven, battery operated • Battery operated with 6 “AA” alkaline batteries • Low battery alert–4 chirps after code entry • Optional external power, sargent 3267 9vdc power supply • External remote “request to enter” • Master, Emergency or Supervisory code will unlock door when low battery has expired • 2000 (S1-LU, S1-PK, S1-PA) users • Programming is done at a central computer for monitoring and access control of each door via a gateway and network wiring using TekControl™ software • Pin Code, Proximity Card, Fob are optional • Operates utilizing any two to six digits per code. Digits may be repeated and codes may start with zero • Cylinder override • Entry of three wrong User Codes disables all codes for ten seconds. Yellow LED on solid • Piezo horn can be heard with each keystroke or turned off by Master or Supervisory Code 3 4 Profile Series v. S1 Cylindrical Lock TEKControl Software Data (RS232) TEKLock 4200 Access Control Server (Gateway) 120VAC L/N/G Ethernet LAN Network Interface Card Profile Series v. S1 1 2 3 2 Parts Breakdown For installation assistance, contact SARGENT at 800-810-WIRE (9473) 5 Profile Series v. S1 Cylindrical Lock 1 17 21 Optional 21 21 10 11 13 15 6 2 7 12 18 16 9 14 7 21 3 25 23 5 24 19 4 3 For installation assistance, contact SARGENT at 800-810-WIRE (9473) Profile Series v. S1 Cylindrical Lock ITEM PART No. DESCRIPTION REQ’D 110-20002-3/4" Backset Latch (Standard)1 10-20533-3/4" Backset Latch (23 Prefix)1 10-20585" Backset Latch (25 Prefix)1 10-26343/4" Throw (41 Prefix)1 210-3136Outside Escutcheon Key Pad, Key Pad/Prox (S1-LU, S1-PK)1 10-3137Outside Escutcheon Prox Only (S1-PA)1 10-3016Outside Escutcheon Housing Only1 52-2432Key Pad/Proximity Bezel Assembly w/ Harness (S1-LU, S1-PK)1 52-2431Prox Only Bezel Assembly w/ Harness/(S1-PA) 1 310-3132Inside Escutcheon and 2000 User Controller (S1-LU)1 10-3133Inside Escutcheon and Key Pad/Prox or Prox Only Controller (S1-PA, S1-PK)1 10-3015Inside Escutcheon Housing Only1 52-28912000 User Key Pad Controller Assembly (S1-LU)1 52-28922000 User Prox Only or Prox Key Pad Controller Assy. (S1-PA, S1-PK)1 410-0523“B” Inside Lever/Passage1 10-2204“J” Inside Lever/Passage NOTE: Coastal Levers & Cylinders other than Standard— See 10 Line Parts Pages 1 10-0501“L” Inside Lever/Passage1 10-0545“P” Inside Lever/Passage1 10-0534“B” Inside Lever (75- Handicap Warning)1 10-2245“J” Inside Lever (75- Handicap Warning)1 10-0512“L” Inside Lever (75- Handicap Warning)1 10-0556“P” Inside…

Text truncated - open the document above for the full version.

Profile Series v. S1 Cylindrical Lock For External power supply see instruction sheet A7477 Plug into TB2 Ground Tab E3 Power/Remote Unlock Connector TB2 Motor Connector TB1 2 PIN DPS DPS DX DX LX LX MOTOR POWER MOTOR POWER 6 PIN SARGENT 3267 9VDC Power Supply 120VAC L/N/G TEKControl Software Power Power Data (RS232) Data (RS232) TEKLock 4200 Access Control Server (Gateway) 120VAC L/N/G RJ45 Profile Series v. S1 Ethernet LAN Network Interface Card SARGENT Profile Series v.S1 Hard-Wired Ethernet Typical Application RJ45 RJ45 RJ45 Profile Series v. S1 8 wire Electric Hinge with 8-pin connectors 6" Power/Remote Unlock Harness (52-3010) with 8-pin connector supplied Red Black +9 (-) (EGND) Green Orange White REX REX 123 7 6 54 8 Blue Brown Ye l l o w Data Out Data In RTS 8 wires Door raceway harness with 8 and 4-pin ElectroLynx connectors. The 4-pin connectors are not used 9 For installation assistance, contact SARGENT at 800-810-WIRE (9473) 10 For installation assistance, contact SARGENT at 800-810-WIRE (9473) Profile Series v. S1 Cylindrical Lock Security screw Security tool 01-0297 included Inside of door Battery cover Battery keeper 4. Install battery keeper clip by inserting tabs into bottom slots. To remove keeper, pull on top tab (Fig. 3). 5. Attach battery cover to inside escutcheon making sure to line up tabs with retaining slots in battery cover. Secure with security screw (Ref. Fig. 4). -- + - + - + - + + - + - 3. Place (6) “AA” batteries into the compartment being careful to align polarity properly (Ref. Fig. 2). - Polarity + Polarity Bottom slots Top tab Tabs Retaining slots 11. Battery Installation Fig. 1 For Battery powered units Fig. 3 Fig. 2Fig. 4 2 - F R O N T Test for proper operation before closing door For RF Technology version, see Section 8 to install Battery Keeper Do not install batteries if controller is powered by external power supply 11 For installation assistance, contact SARGENT at 800-810-WIRE (9473) Profile Series v. S1 Cylindrical Lock Operational Check 7 For devices with cylinders: 1. Insert key into cylinder and rotate. 2. The key will retract the latch. Key should rotate freely. 3. Inside lever retracts latch. 4. Enter 1234* to unlock outside lever handle and retract latch. To remove the battery keeper, a flat bladed screwdriver or similar tool must be used. Insert the screwdriver into the slot at the top of the battery keeper, lift up and pull the top of the keeper away from the batteries. To install, insert the tabs on the bottom of the keeper into the battery compartment slots and press the keeper tightly against batteries. Removal procedure for the Battery Keeper: Insert screwdriver tip and lift up Battery keeper Tip out Keeper tabs Installation Instructions For Wall Mount Door Controller January 11, 2006 Revision 1.0 Table of Contents 1. Warnings .....................................................................................................................3 1.1. FCC Warnings .................................................................................................... 3 1.2. Battery Warning.................................................................................................. 3 2. General Description .................................................................................................... 4 3. Features ....................................................................................................................... 4 4. Connectors ..................................................................................................................4 4.1. Main Controller Board ........................................................................................ 4 4.2. Power Board........................................................................................................ 5 5. Configuration Jumpers................................................................................................ 5 6. LED Indicators............................................................................................................ 6 7. Installation Instructions............................................................................................... 6 7.1. Physical Mounting .............................................................................................. 6 7.2. Controller Wiring................................................................................................ 7 8. Specifications ..............................................................................................................8 1. Warnings 1.1. FCC Warnings The lock controller boards comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) the boards may not cause harmful interference, and (2) the boards must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to any of the products connected to this network not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The lock controller boards have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If his equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiver antenna • Increase the separation between the equipment and receiv…

Text truncated - open the document above for the full version.

2 CONFIDENTIALITY REQUEST September 8, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen Single Access Lock Inc. respectfully requests confidentiality of certain materials provided with the submission of the model 4XXKP/MR under FCC ID SPI-4XXKPMR in accordance with FCC Regulations 0.459. The confidentiality request applies to the following exhibits • Schematics • Bills of Material • Block Diagram • Theory of Operation The 4XXKP/MR has been developed at considerable effort and expense by Single Access Lock Inc. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the companies business advantage. I appreciate your assistance in this matter Regards, Herbert Guck Chief Operating Officer Single Access Lock 300 Satellite Blvd. Suwanee Ga. 30024

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR External Photographs Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 1: External – Low Profile Standard Door Access Lock Front Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 2: External – Low Profile Standard Door Access Lock Back Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 3: External – Low Profile Standard Door Access Lock Side Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 4: External – Wall Mount Door Controller Front Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 5: External – Wall Mount Door Controller Back Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 6: External – Wall Mount Door Controller Side

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Label Information 2 Installing the FCC label on a Low Profile Lock 4XXKP/MR Install the FCC label just above the battery pack to the right of the RJ11 connector.Label Information:FCC ID: SPI-4XXKPMRTHIS DEVICE ALSO CONTAINS FCC ID RTTAB-WLNBTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.(1) THIS DEVICE MAY CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERNCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 2 Installing the FCC label on a Wall Mount 4XXKP/MR Install the FCC label on the back of the plastic enclosure containing the PCB assembly in the upper left hand corner.Label Information:FCC ID: SPI-4XXKPMRTHIS DEVICE ALSO CONTAINS FCC ID RTTAB-WLNBTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.(1) THIS DEVICE MAY CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERNCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Internal Photographs Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 1: Internal – PCB Front View Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 2: Internal – PCB Back View Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 3: Internal – PCB Front and Back View – Radio Module Removed Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 4: Internal – Radio Module Front View Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 5: Internal – Radio Module Rear View

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Test Begin Date: August 4, 2005 Test End Date: December 9, 2005 Report Issue Date: January 5, 2005 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612 Prepared by: Reviewed by: J. Kirby Munroe Manager Wireless Certifications ACS, Inc. R. Sam Wismer Engineering Manager ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 15 pages 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Table of Contents 1.0 General 3 1.1 Purpose 3 1.2 Product Description 3 1.3 Product Variants 3 2.0 Test Facilities 4 2.1 Location 4 2.2 Laboratory Accreditations/Recognitions/Certifications 4 2.3 Radiated Emissions Test Site Description 5 2.3.1 Semi-Anechoic Chamber Test Site 5 2.3.2 Open Area Tests Site (OATS) 6 2.4 Conducted Emissions Test Site Description 7 3.0 Applicable Standards and References 8 4.0 List of Test Equipment 8 5.0 Support Equipment 9 6.0 EUT Setup Block Diagram 9 7.0 Summary of Tests 10 7.1 Section 15.207 – AC Power Line Conducted Emissions 10 7.1.1 Test Methodology 10 7.1.2 Test Results 10 7.2 Section 15.209 – Radiated Spurious Emissions (Intentional Radiators) 13 7.2.1 Test Methodology 13 7.2.2 Distance Correction 13 7.2.3 Test Results – Low Profile Enclosure 13 7.2.4 Test Results – Wall Mount Enclosure 14 7.2.5 Test Results – Band-edge 14 7.3 Section 15.109 – Radiated emissions (Unintentional Radiators) 15 7.3.1 Test Methodology 15 7.3.2 Test Results 15 8.0 Conclusion 15 Additional Exhibits Included In Filing Internal Photographs External Photographs Test Setup Photographs Product Labeling BOM Information to Users Theory of Operation System Block Diagram Schematics Model: 4XXKP/MR FCC ID: SPI-4XXKPMR ACS Report: 05-0270-15C Advanced Compliance Solutions Page 3 1.0 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 of the FCC’s Code of Federal Regulations for the Single Access Lock model 4XXKP/MR. 1.2 Product Description The 420 or 460 KP or MR models are microprocessor-controlled network system controllers which provide the ability for access control at a single point within a firm’s network of access control situations be they any type of door. These single devices or access points may be powered by external low power 12 VDC or 24 VDC or batteries. They are linked to a network controlled authorization system that grants or limits access. On the KP models there are two methods to grant access at the device. They are through a keypad entry or proximity card (125 KHz only). On the MR models they can be through a keypad or magnet card reader that can read clock and data stream from Magnetic stripe Cards. The controller electronics for each enclosure type are identical with the addition of a power board on the wall mount door controllers. The product variants are electrically identical with the exception of the 802.11 module for the 460 KP and 460 MR. Although the 802.11 radio module is not present in the 420 KP and 420 MR variants, the electrical connection is available. 1.3 Product Variants Enclosure Variants: Low Profile Standard Door Access Lock Wall Mount Door Controller Product Variants: 420 KP - Keypad & Proximity Sensor, Battery or low power DC with Network Connection 420 MR - Magnetic reader to locking device with Network Connection, Battery or low power DC 460 KP - Keypad & Proximity Sensor, 802.11 Radio, Battery or low power DC with Network Connection 460 MR - Magnetic reader to locking device with Network Connection, 802.11 Radio, Battery or low power DC Note: For the purpose of this report both the Low profile Standard Door Access Lock and the Wall Mount Door Controller was evaluated. It represented the worst case configuration which contained the proximity sensor and 802.11b radio. The 802.11b radio module is modular approved under FCC ID: RTTAB-WLNB therefore testing was performed on the proximity sensor only to show compliance with Part 15 Subpart C. Model: 4XXKP/MR FCC ID: SPI-4XXKPMR ACS Report: 05-0270-15C Advanced Compliance Solutions Page 4 2.0 TEST FACILITIES 2.1 Location The radiated and conducted emissions test sites are located at the following address: Advanced Compliance Solutions 5015 B.U. Bowman Drive Buford, GA 30518 Phone: (770) 831-8048 Fax: (770) 831-8598 2.2 Laboratory Accreditations/Recognitions/Certifications The Semi-Anechoic Chamber Test Site, Open Area Test Site (OATS) and Conducted Emissions Site have been fully described, submitted to, and accepted by the FCC, Industry Canada and the Japanese Voluntary Control Council for Interference by information technology equipment. In addition, ACS is compliant to ISO 17025 as certified by the National Institute of Standards and Technology under their National Voluntary Laboratory Accreditation Program. The following certification numbers have been issued in recognition of these accreditations and certifications: FCC Registration Number: 89450 Industry Canada Lab Code: IC 4175 VCCI Member Number: 1831 ƒ VCCI OATS Registration Number R-1526 ƒ VCCI Conducted Emissions Site Registration Number: C-1608 NVLAP Lab Code: 200612 Model: 4XXKP/MR FCC ID: SPI-4XXKPMR ACS Report: 05-0270-15C Advanced Compliance Solutions Page 5 2.3 Radiated Emissions Test Site Description 2.3.1 Semi-Anechoic Chamber Test Site The Semi-Anechoic Chamber Test Site consists of a 20’ x 30’ x 18’ shielded enclosure. The chamber is lined with Toyo Ferrite Grid Absorber, model number FFG-1000. The ferrite tile grid is 101 x 101 x 19mm thick and weighs approximately 550 grams. These tiles are mounted on steel panels and i…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.209 ACS Report Number: 05-0270-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Test Setup Photographs Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 1: Test Setup – Radiated Emissions – Low Profile Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 2: Test Setup – Radiated Emissions – Wall Mount Model: 4XXKP/MR Advanced Compliance Solutions FCC ID: SPI-4XXKPMR 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 3: Test Setup – AC Powerline Conducted Emissions – Wall Mount