SV9-NYNEBASSBluetooth speaker

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body FCC Radiation Exposure Statement Nyne Bass Safety Guide EN Bluetooth Speaker Series EN Specifications are subject to change without notice. All registered and unregistered trademarks are property of their respective owners. Nyne Multimedia Inc. All rights reserved. SG-Bass-10-10-2013-V. 1.0 nyne.com Important Safety The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un- isolated, dangerous voltage within the inside of the device that may be of sufficient magnitude to constitute a risk of electric shock to persons. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the device. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. WARNING: Where the mains plug/ appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. Read these instructions before operation. Keep these instructions for future reference. Follow all instructions for installation, use and maintenance of the device. To avoid tilt or drop, place the device on a flat and hard surface. To clean the device, disconnect power first. Clean only with soft and dry cloth. To ensure compatibility, only use accessories recommended by the manufacturer. When the device is suddenly moved from cold to warm surroundings, condensation may form in the housing of the device. Before use, leave the device in the warm environment until the moisture evaporates. Keep the device away from heat sources, such as a radiator, heater, oven, amplifier, naked flames or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the apparatus. Never block any ventilation openings. Install in accordance with the manufacture’s instructions. • Do not expose the device to sand or dust, or cover it with items, such as newspapers, table cloths, or curtains. • Do not operate the device in an enclosed cabinet. Leave sufficient free space around the device for adequate ventilation. Do not attempt to repair or service the device yourself. Opening or removing the cabinet may expose you to electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. Do not use the device if any abnormality occurs. If any smoke or odor becomes apparent, contact your dealer immediately. Do not try to repair the device yourself. Avoid using dropped or damaged appliances. If the device is dropped and the housing is damaged, the internal components may not function normally. Stop use and contact your dealer for repair. Continued use of the device may cause fire or electric shock. To reduce the risk of electric shock, do not touch any connector with wet hands. Never remove the housing of the device. Never lubricate any part of the device. Never place the device on top of any other electrical equipment. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Notice Modification Any modification (such as removing the speaker grill) to the device, without prior authorization from the manufacturer, may void your warranty and authority to operate the device. FCC compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. EN • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. CE statement This product complies with the radio interference requirements of the European Community. Recycling Packaging Observe the local regulations for how to dispose of the packaging materials. WEEE …

Text truncated - open the document above for the full version.

Dong guan Synst Electronics.Co.,Ltd *************************************************************************** the undersigned, hereby confirm that any of our production units bearing the following models numbers are said to be identical in cosmetics, materials, PCB layout, electrical, mechanical, and physical design, including software/firmware and they are different in the products are difference in model number only. 1) Model No.: NYNE Bass Item Name: Bluetooth speaker 2) Model No.: NB400 Item Name: Bluetooth speaker Signature 签名： Name 名字： Yabo.Cui/ Manager ate 日期： 2013-10-29 ****************************************************************************

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china 2013/10/11 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Dong guan Synst Electronics.Co.,Ltd . to act as a Certification Body for certifying for the following project(s): Product description: Bluetooth speaker model name: NYNE Bass , NB400 FCC ID: SV9-NYNEBASS We affirm that between SIEMIC and ___ Dong guan Synst Electronics.Co.,Ltd _ , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Yabo.Cui/ Manager Contact information / address: The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china 2013/10/11 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: SV9-NYNEBASS We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Yabo.Cui/ Manager Contact information / address: The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china

FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 96 of 107 12 PHOTOS OF EUT External Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 97 of 107 External Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 98 of 107 External Photos M/N: NYNE Bass

Labeling place

FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 99 of 107 Internal Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 100 of 107 Internal Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 101 of 107 Internal Photos M/N: NYNE Bass Bluetooth Antenna FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 102 of 107 Internal Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 103 of 107 Internal Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 104 of 107 Internal Photos M/N: NYNE Bass FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 105 of 107 Internal Photos M/N: NYNE Bass Adapter 1 Photos FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 106 of 107 Adapter 1 Photos Adapter 2 Photos FCC ID：SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 107 of 107 Adapter 2 Photos

FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1310004 Page 1 of 3 FCC 47 CFR MPE REPORT Dong guan Synst Electonics.Co.,Ltd Bluetooth speaker Model Number: NYNE Bass FCC ID: SV9-NYNEBASS Prepared for : Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1310004 Date of Test : September 09~ November 29, 2013 Date of Report : December 03, 2013 FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1310004 Page 2 of 3 Maximum Permissible Exposure 1、Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a)、Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b)、Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2、MPE Calculation Method E (V/m) = (30*P*G) 0.5/d Power Density: Pd (W/m2) = E2/377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d2) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1310004 Page 3 of 3 3、Calculated Result and Limit Adapter 1 Antenna gain Model Frequency (MHz) Peak output power (dBm) Peak output power (mW) (dBi) (Linear) Power Density (S) (mW/cm2) Limited of Power Density (S) (mW/cm2) Test Result 2402 2.444 1.7550 1 0.00035 1 Compiles 2440 3.925 2.4690 1 0.00049 1 Compiles GFSK 2480 4.848 3.0540 1 0.00061 1 Compiles Adapter 2 Antenna gain Model Frequency (MHz) Peak output power (dBm) Peak output power (mW) (dBi) (Linear) Power Density (S) (mW/cm2) Limited of Power Density (S) (mW/cm2) Test Result 2402 3.081 2.0330 1 0.00040 1 Compiles 2440 4.258 2.6660 1 0.00053 1 Compiles GFSK 2480 4.775 3.0030 1 0.00060 1 Compiles Note: dBm = 10log(mW)

FCC ID: SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 1 of 107 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Dong guan Synst Electonics.Co.,Ltd Bluetooth speaker Model Number: NYNE Bass FCC ID: SV9-NYNEBASS Prepared for : Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1310003 Date of Test : September 09~ November 29, 2013 Date of Report : December 03, 2013 FCC ID: SV9-NYNEBASS EST Technology Co.,Ltd Report No.ESTE-R1310003 Page 2 of 107 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION.........................................................................................................................3 1. GENERAL INFORMATION.................................................................................................................5 1.1. Description of Device (EUT) ........................................................................................................... 5 2. SUMMARY OF TEST.........................................................................................................................6 2.1. Summary of test result...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Assistant equipment used for test ..................................................................................................... 8 2.4. Block Diagram ................................................................................................................................. 8 2.5. Test mode ......................................................................................................................................... 8 2.6. Channel List for Bluetooth ............................................................................................................... 9 2.7. Test Equipment............................................................................................................................... 10 3 POWER LINE CONDUCTED EMISSION TEST........................................................................................11 3.1. Limit................................................................................................................................................... 11 3.2. Block Diagram of Test Setup ......................................................................................................... 11 3.3 Test Procedure ................................................................................................................................ 11 3.4. Test Result ...................................................................................................................................... 11 3.5. Test data ......................................................................................................................................... 12 4 RADIATED EMISSION TEST................................................................................................................16 4.1 Limit.................................................................................................................................................... 16 4.2. Test Procedure ................................................................................................................................ 17 4.3 Block Diagram of Test setup .......................................................................................................... 17 4.4 Test Result ...................................................................................................................................... 17 4.5 Test Data ........................................................................................................................................ 18 5 CONDUCTED SPURIOUS EMISSION.................................................................................................54 5.1 Limit ............................................................................................................................................... 54 5.2 Test Procedure ................................................................................................................................ 54 5.3 Test Result ...................................................................................................................................... 54 5.4 Test Data ........................................................................................................................................ 55 6 BAND EDGE COMPLIANCE TEST...................................................................................................68 6.1 Limit ............................................................................................................................................... 68 6.2 Test Procedure ................................................................................................................................ 68 6.3 Test Result ...................................................................................................................................... 68 6.4 Test Data ........................................................................................................................................ 69 7 6dB Bandwidth Test.....................................................................................................................77 7.1 Limit ............................................................................................................................................... 77 7.2 Test Procedure ...........................................................…

Text truncated - open the document above for the full version.

FCC ID: SV9-NYNEBASS EST Technology Co.,Ltd Report No. ESTE-R1310001 Page 95 of 108 12. TEST SETUP PHOTO Conducted Test FCC ID: SV9-NYNEBASS EST Technology Co.,Ltd Report No. ESTE-R1310001 Page 96 of 108 Radiated Test (30-1000 MHz) FCC ID: SV9-NYNEBASS EST Technology Co.,Ltd Report No. ESTE-R1310001 Page 97 of 108 Radiated Test (1000-25000 MHz)