SV9-NYNETTBluetooth speaker

Nyne TT Quick User Guide EN Bluetooth Speaker Series EN All registered and unregistered trademarks are property of their respective owners. Nyne Multimedia Inc. All rights reserved. QUG-TT-11-3-2013-V.1.0 nyne.com Extend the stand and place the speaker on a hard flat surface. Connect power. Tip: The speaker is only compatible with the original power adapter included in the package. Slide the power switch to the ON position. +The built-in battery starts charging automatically. Tip: The speaker is fully charged when the indicator turns from white to green. You can use either the AC power or built-in battery as power supply. ENEN EN Pressto power on. +The Bluetooth indicatorflashes blue, indicating that the speaker is in pairing mode. Tips: If there is no power to the speaker after you press the power button, check that: (1) the speaker is connected to AC power or the battery is fully charged; (2) you have slided the power switch to the ON position. If the problem remains, slide the power switch to the OFF and then ON position again. You can pressagain or slide the power switch to the OFF position to power off. To save power, the speaker turns off automatically after 30 minutes of inactivity. EN Nyne TT (1) Make sure that the speaker is in pairing mode. (2) Enable Bluetooth on your device to be paired with the speaker. (3) Select ‘Nyne TT’ from the available devices (enter the password ‘0000’ if necessary) to start pairing and connection with the speaker. (4) After successful connection, the Bluetooth indicatorturns solid blue and the speaker beeps. Tips: This speaker supports automatic connection with a previously paired device after power-off and power-on again. You can press and hold for more than 2 seconds to enter manual pairing mode. In this way, you can pair the speaker with a new Bluetooth device. You can press and hold both + and - for more than 10 seconds to clear all paired Bluetooth devices. This speaker is Siri-compatible. EN (1) Connect an auxiliary audio device to the speaker through the supplied 3.5mm audio cable. (2) Play and control music on the audio device, and use +/- on the speaker to adjust volume if necessary. Tip: When the 3.5mm audio cable is plugged in, the speaker switches to AUX IN mode automatically. When it is unplugged, the speaker switches back to Bluetooth mode and connects with the previously paired device automatically. If no device is available, the speaker enters pairing mode. EN Play music on your device paired and connected with the speaker. During music play: • Press +/- to adjust volume. • Press to skip to the previous or next song. When you make a call or there is an incoming call, you can use the speaker as a speaker phone. • When there is an incoming call, you can press to receive the call. • During a call, you can press to end the call. • When using Siri on your Apple devices, you can press twice to enable Siri support on the speaker. Tips: Music play is paused during a call and resumed automatically when the call ends. You can press and hold to disconnect the current Bluetooth connection. EN Charge your mobile device through the 5V USB charging socket. EN Nyne TT Safety Guide EN Bluetooth Speaker Series EN All registered and unregistered trademarks are property of their respective owners. Nyne Multimedia Inc. All rights reserved. SG-TT-11-3-2013-V. 1.0 nyne.com Important Safety with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un- isolated, dangerous voltage within the inside of the device that may be risk of electric shock to persons. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the device. or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects not be placed on apparatus. WARNING: Where the mains plug/ appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as Read these instructions before operation. Keep these instructions for future reference. Follow all instructions for installation, use and maintenance of the device. To avoid tilt or drop, place the device To clean the device, disconnect dry cloth. To ensure compatibility, only use accessories recommended by the manufacturer. When the device is suddenly moved from cold to warm surroundings, condensation may form in the housing of the device. Before use, leave the device in the warm environment until the moisture evaporates. Keep the device away from heat sources, such as a radiator, heater, direct sunlight. lighted candles, should be placed on the apparatus. Never block any ventilation openings. Install in accordance with the manufacture’s instructions. • Do not expose the device to sand or dust, or cover it with items, such as newspapers, table cloths, or curtains. • Do not operate the device in an enclosed cabinet. Leave device for adequate ventilation. Do not attempt to repair or service the device yourself. Opening or removing the cabinet may expose you to electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to Do not use the device if any abnormality occurs. If any smoke or odor becomes apparent, contact your dealer immediately. Do not try to repair the device yourself. Avoid using dropped or damaged appliances. If the device is dropped and the housing is damaged, the internal components may not function normally. Stop use and contact your dealer for repair. Continued use of shock. To reduce the risk of electric shock, do not touch any connector with wet hands. Never remove the housing of…

Text truncated - open the document above for the full version.

Dong guan Synst Electronics.Co.,Ltd *************************************************************************** the undersigned, hereby confirm that any of our production units bearing the following models numbers are said to be identical in cosmetics, materials, PCB layout, electrical, mechanical, and physical design, including software/firmware and they are different in the products are difference in model number only. 1) Model No.: NYNE TT Item Name: Bluetooth speaker 2) Model No.: NB450 Item Name: Bluetooth speaker Signature 签名： Name 名字： Yabo.Cui/ Manager ate 日期： 2013-11-04 ****************************************************************************

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china 2013/11/04 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Dong guan Synst Electronics.Co.,Ltd . to act as a Certification Body for certifying for the following project(s): Product description: Bluetooth speaker model name: NYNE TT , NB450 FCC ID: SV9-NYNETT We affirm that between SIEMIC and ___ Dong guan Synst Electronics.Co.,Ltd _ , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Yabo.Cui/ Manager Contact information / address: The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china 2013/11/11 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: SV9-NYNETT We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Yabo.Cui/ Manager Contact information / address: The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong.china

FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 98 of 106 13. PHOTOS OF EUT External Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 99 of 106 External Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 100 of 106 External Photos M/N: NYNE TT

34.5mm 50mm NYNE TT Model No.: NYNE TT FCC ID: SV9-NYNETT Input: 12V 2.5A MADE IN CHINA Serial number Size: 46 x 10mm 97.00 253.00 214.9.00 14.5 11.3 63.5 CONNECTORS TEXT: Embossed 0.5mm up FCC Warnings: Embossed 0.5mm up FCC Label Location: Concave 0.3mm down Size: L35mm x H34.5mm Silkprint: Print Cool Gray 8C Model No.: NYNE TT FCC ID: SV9-NYNETT Input: 12V 2.5A MADE IN CHINA 14.2mm 18mm 33.8mm 5.25mm

FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 101 of 106 Internal Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 102 of 106 Internal Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 103 of 106 Internal Photos M/N: NYNE TT Bluetooth Antenna FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 104 of 106 Internal Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 105 of 106 Internal Photos M/N: NYNE TT FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 106 of 106 Adapter Photos M/N: NYNE TT

FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1312008 Page 1 of 3 FCC 47 CFR MPE REPORT Dong guan Synst Electonics.Co.,Ltd Bluetooth speaker Model Number: NYNE TT FCC ID: SV9-NYNETT Prepared for : Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1312008 Date of Test : November 04~ November 29, 2013 Date of Report : December 05, 2013 FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1312008 Page 2 of 3 Maximum Permissible Exposure 1、Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a)、Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b)、Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2、MPE Calculation Method E (V/m) = (30*P*G) 0.5/d Power Density: Pd (W/m2) = E2/377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d2) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained FCC ID: SV9-NYNBASS EST Technology Co.,Ltd Report No. ESTE-R1312008 Page 3 of 3 3、Calculated Result and Limit Adapter 1 Antenna gain Model Frequency (MHz) Peak output power (dBm) Peak output power (mW) (dBi) (Linear) Power Density (S) (mW/cm2) Limited of Power Density (S) (mW/cm2) Test Result 2402 -0.074 0.9830 1 0.00020 1 Compiles 2440 2.271 1.6870 1 0.00034 1 Compiles GFSK 2480 4.261 2.6670 1 0.00053 1 Compiles Note: dBm = 10log(mW)

FCC ID: SV9-NYNETT (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 1 of 68 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Dong guan Synst Electonics.Co.,Ltd Bluetooth speaker Model Number: NYNE TT FCC ID: SV9-NYNETT Prepared for : Dong guan Synst Electronics.Co.,Ltd The Science&Technology Industrial Park Houjie Town, Dongguan,Guangdong. china Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1312007 Date of Test : November 04~ 29, 2013 Date of Report : December 05, 2013 FCC ID: SV9-NYNETT (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 2 of 68 TABLE OF CONTENTS Description Page TESTREPORT VERIFICATION.........................................................................................................................3 1.G ENERAL INFORMATION.................................................................................................................5 1.1.Description of Device (EUT) ........................................................................................................... 5 2.SUMMARY OF TEST.........................................................................................................................6 2.1.Summary of test result...................................................................................................................... 6 2.2.Test Facilities ................................................................................................................................... 7 2.3.Assistant equipment used for test ..................................................................................................... 8 2.4.Block Diagram ................................................................................................................................. 8 2.5.Test mode ......................................................................................................................................... 8 2.6.Channel List for Bluetooth ............................................................................................................... 8 2.7.Test Equipment................................................................................................................................. 9 3POWER LINE CONDUCTED EMISSIONTEST........................................................................................10 3.1. Limit................................................................................................................................................... 10 3.2.Block Diagram of Test Setup ......................................................................................................... 10 3.3Test Procedure ................................................................................................................................ 10 3.4.Test Result ...................................................................................................................................... 10 3.5.Test data ......................................................................................................................................... 11 4RADIATEDEMISSIONTEST................................................................................................................13 4.1 Limit.................................................................................................................................................... 13 4.2.Test Procedure ................................................................................................................................ 14 4.3Block Diagram of Test setup .......................................................................................................... 14 4.4Test Result ...................................................................................................................................... 14 4.5Test Data ........................................................................................................................................ 15 5CONDUCTED SPURIOUSEMISSION.................................................................................................33 5.1Limit ............................................................................................................................................... 33 5.2Test Procedure ................................................................................................................................ 33 5.3Test Result ...................................................................................................................................... 33 5.4Test Data ........................................................................................................................................ 34 6BANDEDGE COMPLIANCE TEST...................................................................................................40 6.1Limit ............................................................................................................................................... 40 6.2Test Procedure ................................................................................................................................ 40 6.3Test Result ...................................................................................................................................... 40 6.4Test Data ........................................................................................................................................ 41 76dB Bandwidth Test.....................................................................................................................45 7.1Limit ............................................................................................................................................... 45 7.2Test Procedure ............................................................................…

Text truncated - open the document above for the full version.

FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 95 of 106 12. TEST SETUP PHOTO Conducted Test FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 96 of 106 Radiated Test (30-1000 MHz) FCC ID: SV9-NYNETT EST Technology Co.,Ltd Report No. ESTE-R1312005 Page 97 of 106 Radiated Test (1000-25000 MHz)