SVS-CB-MOTConfigurable electronic board that controls the system through wired and wireless devices. Externally powered at 110/230 Vac. Wall mounted.

FCC/ISED REGULATORY NOTICES Parque Tecnológico de Andalucía C/Marie Curie, 21 · 29590 Málaga + 34 900 400 445 · www.airzone.es 47 CFR § 2.1077 Compliance Information In accordance with FCC Rules and Regulation Modification statement Corporacion Empresarial Altra S.L. has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Wireless notice This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS‐102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with the FCC/ISED RF exposure limits and has been evaluated in compliance with mobile exposure conditions. The equipment must be installed and operated with minimum distance of 20 cm of the human body. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. NOTIFICATIONS RÉGLEMENTAIRES FCC/ISED Parque Tecnológico de Andalucía C/Marie Curie, 21 · 29590 Málaga + 34 900 400 445 · www.airzone.es 47 CFR § 2.1077 Informations de conformité Conformément aux règles et règlements de la FCC Déclaration de modification Corporación Empresarial Altra S.L n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur. Déclaration d'interférence Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Wireless avis Le présent appareil est conforme à l'exposition aux radiations FCC / ISED définies pour un environnement non contrôlé et répond aux directives d'exposition de la fréquence de la FCC radiofréquence (RF) et RSS‐102 de la fréquence radio (RF) ISED règles d'exposition. L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur. Cet appareil est conforme aux limites d'exposition RF d'ISDE/FCC et a été évalué conformément aux conditions d'exposition mobile. L'équipement doit être installé et utilisé à une distance minimale de 20 cm du corps humain. Notice relative aux appareils numériques FCC Classe B Cet équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de classe B, conformément à la section 15 du règlement de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l’énergie radiofréquence. S'il n'est pas installé et utilisé conformément aux instructions, il peut causer des interférences nuisibles aux communications radio. Cependant, rien ne garantit que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception de radio ou de télévision, ce qui peut être déterminé en éteignant et en rallumant l'équipement, l'utilisateur est invité à tenter de corriger l'interférence en appliquant une ou plusieurs des mesures suivantes : -Réorientez ou déplacez l'antenne de réception. -Augmentez la distance entre l'équipement et le récepteur. -Connectez l'équipement à une prise d'un circuit différent de celui auquel le récepteur est connecté. -Consultez votre revendeur ou un technicien radio / télévision expérimenté. CAN ICES-3 (B) / NMB-3 (B) Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003. AVISOS REGULADORES DE FCC/ISED Parque Tecnológico de Andalucía C/Marie Curie, 21 · 29590 Málaga + 34 900 400 445 · www.airzone.es 47 CFR § 2.1077 Información de cumplimiento De acuerdo con las normas y reglamentos de FCC Declaración de modificaciones Corporación Empresarial Altra S.L no aprueba ningún cambio o modificación en el dispositivo por parte del usuario. Cualquier cambio o modificación puede anular la autoridad del usuario para manejar el equipo. Declaración de interferencias. Este dispositivo cumple con el apartado 15 de las Normas FCC y con la licencia estándar RSS de la industria de…

Text truncated - open the document above for the full version.

(ES) CARACTERÍSTICAS TÉCNICAS (EN)TECHNICAL SPECS (PT) CARACTERÍSTICAS TÉCNICAS (FR) CARACTÉRISTIQUES TECHNIQUES (IT) CARATTERISTICHE TECNICHE (DE) TECHNISCHE DATEN CENTRAL DE SISTEMA AIRZONE FLEXA 3.0 AIRZONE FLEXA 3.0 MAIN CONTROL BOARD CENTRAL DE SISTEMA AIRZONE FLEXA 3.0 PLATINE CENTRALE AIRZONE DU SYSTEME IBPRO6 SCHEDA CENTRALE AIRZONE FLEXA 3.0 SYSTEMZENTRALE AIRZONE FLEXA 3.0 (ES) MONTAJE / (EN) ASSEMBLY (PT) MONTAGEM / (FR) MONTAGE (IT) MONTAGGIO / (DE) MONTAGE AZCE8CB1MOT / AZCE8CB2MOT Airzone AZCE8CB1MOT 195 mm 55,5 mm 180 mm N L V máx.110/230 Vac I máx.250 mA Fréquence / Frequenza / Frequenz60/50 Hz Consommation Stand-by / Consumo Stand-by / Stand-by-Leis- tungsauf nahme 2.10 W (110 Vac) 3.12 W (230 Vac) Protection contre surtension / Protezione contro sovratensione / Überstromschutz Modul 250 mA AZ1 - AZ2 - AZ3 - IU - CAN Câble torsadé et blindé / Cavo schermato / Abgeschirmtes Kabel und umflochten 2 x 0,22 + 2 x 0,5 mm 2 V máx12 V DM1 Câble torsadé et blindé / Cavo schermato / Abgeschirmtes Kabel und umflochten 2 x 0,22 + 2 x 0,5 mm 2 Protocole de communication / Protocollo di comunicazione / Kommunikationsprotokoll MODBUS RS-485 Par – 19200 bps P3 Protocole de communication / Protocollo di comunicazione / Kommunikationsprotokoll Airzone Fréquence / Frequenza / Frequenz 868.12 MHz (EU) 915.2 MHz (EEUU, Canada, Australia, Nueva Zelanda) Puissance de transmission / Potenza di trasmissione / Strahlungsleistung 0 dBm Distance maximale en champ libre / Distanza massima in spazio aperto/ Max. Abstand im f reien Raum 40 m M1 ... M8 Nombre de sorties / Nº uscite / Anzahl Ausgänge8 Nombre maximal de moteurs par sortie / Nº massimo di motori per uscita / Max. Anzahl Antriebe pro Ausgänge 2 V max12 V I max150 mA O1 - O2 Nombre de relais / Nº di relè / Anzahl Relais2 V max250 Vac / 24 V I max12 A Températures opérative / Termperature operative / Betriebstemperaturen De stockage / Stoccaggio / Lagerung-20 ... 70 ºC De fonctionnement / Funzionamento / Betrieb0 ... 50ºC Aspectos mecánicos / Mechanical aspects / Aspectos mecânicos Degré de protection/ Grado di protezione/ SchutzklasseIP 21 Poids / Peso / Gewicht554 g Bluetooth protocole / protocollo / Pro- tokoll Bluetooth v5.0 and BLE specificaction Classe / Classe / KlasseClass-1, class-2 and class-3 transmitter N L V máx.110/230 Vac I máx.250 mA Frecuencia / Frequency / Frequência60/50 Hz Consumo Stand-by / Stand-by consumption / Consumo em stand-by 2.10 W (110 Vac) 3.12 W (230 Vac) Protección sobre corriente módulo / Module over-current protection / Proteção sobrecorrente módulo 250 mA AZ1 - AZ2 - AZ3 - IU - CAN Cable apantallado y trenzado / Shielded twisted pair / Cabo blindado e trançado 2 x 0,22 + 2 x 0,5 mm 2 V máx12 V DM1 Cable apantallado y trenzado / Shielded twisted pair / Cabo blindado e trançado 2 x 0,22 + 2 x 0,5 mm 2 Protocolo de comunicaciones / Communications protocol / Protocolo de comunicação MODBUS RS-485 Par – 19200 bps P3 Protocolo de comunicaciones / Communications protocol / Protocolo de comunicação Airzone Frecuencia / Frequency / Frequência 868.12 MHz (EU) 915.2 MHz (EEUU, Canada, Australia, Nueva Zelanda) Potencia de radiación / Radiation power / Potência de radiação0 dBm Distancia máxima en espacio libre / Maximum distance in open space Distância máxima em espaço livre 40 m M1 ... M8 Nº de salidas / Nº of outputs / Nº de saídas8 Nº máximo de motorizaciones por salidas / Maximum number of outputs per damper / Nº máximo de motorizações por saídas 2 V max12 V I max150 mA O1 - O2 Nº de relés / Nº of relays / Nº de relés2 V max250 Vac / 24 V I max12 A Temperaturas operativas / Operating temperaturas / Temperatura de operaçao Almacenaje / Storage / Armazenamento -20 ... 70 ºC Funcionamiento / Operation / Funcionamento0 ... 50ºC Aspectos mecánicos / Mechanical aspects / Aspectos mecânicos Grado de protección / Protection class / Grau de proteçãoIP 21 Peso / Weight / Peso554 g Bluetooth Protocolo / protocol / ProtocoloBluetooth v5.0 and BLE specificaction Clase / Class / ClasseClass-1, class-2 and class-3 transmitter Equipo electrónico configurable encargado de hacer la gestión del sistema, mediante dispositivos cableados e inalámbricos. Alimentación externa a 110 / 230 Vac. Montaje en superficie. Funcionalidades: • Control y gestión del estado de los termostatos, hasta 8 zonas. • Salidas de alimentación para elementos motorizados. • Salida de relé configurable como ventilación mecánica (VMC) o caldera. • Gestión de pasarelas de control a equipos de climatización. • Comunicación con equipos de control integral de la instalación. • Comunicaciones con otros sistemas de control externo mediante bus de integración. Para más información de nuestros productos remítase a myzone.airzone.es Configurable electronic board that controls the system through wired and wireless devices. Externally powered at 110 / 230 Vac. Wall mounted. Functionalities: • Control and management of the thermostats (up to 8 zones). • Power outputs for motorized elements. • Relay outlet configurable as CMV (Controlled Mechanical Ventilation) or boiler. • Control gateway management. • Communication with units of integral control of the installation. • Communications with other external control systems through integration bus. For further information about our products, go to myzone.airzone.es Equipamento eletrônico configurável responsável pela gestão do sistema, mediante dispositivos com cabos e sem fios. Alimentação externa a 110 / 230 Vac. Montagem em superf ície. Funcionalidades: • Controlo e gestão do estado dos termostatos, até 8 zonas. • Saídas de alimentação para elementos motorizados. • Saídas de relés configuráveis como ventilação mecânica (VMC) ou caldeira. • Gestão de passarelas de controlo a equipamentos de climatização. • Comunicação com equipamentos de controlo integral da instalação. • Comunicação com outros sistemas de controlo externo mediante barramento de integração. Para obter mais informações sobre nossos produtos, consulte myzone.ai…

Text truncated - open the document above for the full version.

FCB045_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 05/06/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certifications concerning “covered” equipment. Section 2.911(d)(5)(i)- (ii) FCC ID: SVS-CB-MOT We, CORPORACION EMPRESARIAL ALTRA S.L., located in C/ Marie Curie, 21 – Málaga (Spain) Postcode/Zip Code: 29590; certify that: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, __________________________ By: Jose Miguel Peña Title: Product Quality Manager Company: Corporación Empresarial Altra S.L. Telephone: +34 900 400 445 e-mail: [email protected]

FCB046_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 05/06/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certification designating a U.S. agent for service of process. As required by section 2.911(d)(7), FCC ID: SVS-CB-MOT We, CORPORACION EMPRESARIAL ALTRA S.L., located in C/ Marie Curie, 21 – Málaga (Spain), Postcode/Zip Code: 29590,; certify that: AIRZONE NORTH AMERICA CORP. Address: 1800 SW 1st Ave. Suite # 203, Miami, Florida. Zip 33129 United States of America Victoria Garcia Massimo [email protected] FRN: 0033622051 Is our designated U.S. agent for service of process and we acknowledge: - our consent to accept service of process in the United States for matters related to the applicable equipment at the physical U.S. address and email address of the designated U.S. agent - the acceptance to maintain an U.S. agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Designated U.S. Agent Sincerely, ________________ By: Jose Miguel Peña Title: Product Quality Manager Company: Corporación Empresarial Altra S.L. Telephone: +34 900 400 445 e-mail: [email protected] We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address stated above. __________________ By: Victoria Garcia Massimo Title: NA Operations Manager Company: Airzone North America Corp. Telephone: +1 954 9402137 e-mail: [email protected]

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 05/04/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: SVS-CB-MOT We, CORPORACION EMPRESARIAL ALTRA S.L., C/ Marie Curie, 21 – Málaga (Spain) Postcode/Zip Code: 29590, hereby authorize DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía Severo Ochoa, 2 & 6 | 29590 | Málaga | Spain Mr. /Ms. Alberto Rico, e-mail: [email protected], Phone: (34) 95 261 94 06 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Jose Miguel Peña Title: Product Quality Manager Company: Corporación Empresarial Altra S.L. Telephone: +34 900 400 445 e-mail: [email protected]

FCB012_04 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 05/04/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: SVS-CB-MOT To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, CORPORACION EMPRESARIAL ALTRA S.L. hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Short Term Permanent SDR software and security information Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, __________________________ By: Jose Miguel Peña Title: Product Quality Manager Company: Corporación Empresarial Altra S.L. Telephone: +34 900 400 445 e-mail: [email protected]

Integration declaration From: To: Corporación Empresarial Altra S.L. Address: C/ Marie Curie, 21 – Málaga (Spain) Postcode/Zip Code: 29590 Regulatory Certification Body DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Related to product: Type of equipment: Central Flexa 4 Brand: AIRZONE Model: AZCE8CB2MOT To whom it may concern: We, Corporación Empresarial Altra S.L., hereby declares that the Espressif ESP32- C3-MINI-1 module has not been modified and has been integrated following module’s manufacturer instructions for the installation such as input voltages considering extreme voltages, driver software, environmental conditions, etc... Wi-Fi functionality has been disabled for this integration, only Bluetooth functionality is available in the host product. Then, FCC and ISED certifications for Espressif ESP32-C3-MINI-1 module remain applicable, valid and representative of the module as it is manufactured today and are representative for the certification of the host device AZCE8CB2MOT. By: Alejandro Torres P.A. Title: Certification Engineer Company: Corporación Empresarial Altra S.L. Telephone: +34 900 400 445 Date: 05/22/2023

PRODUCT UNDER CERTIFICATION CLIENT: ALTRA CORPORATION PROJECT: 72082B TYPE OF PRODUCT: Central Flexa 4 BRAND NAME: AIRZONE MODEL NAME: AZCE8CB2MOT EXTERNAL PHOTOS

PRODUCT UNDER CERTIFICATION CLIENT: ALTRA CORPORATION PROJECT: 72082B TYPE OF PRODUCT: Central Flexa 4 BRAND NAME: AIRZONE MODEL NAME: AZCE8CB2MOT INTERNAL PHOTOS

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 72082RAN.002A1 2023-07-12 Test report No: NIE: 72082RAN.002A1 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091; FCC 47 CFR Part 1.1307 FCC 47 CFR Part 1.1310 (*) Identification of item under evaluation CENTRAL FLEXA 4 (*) Trademark AIRZONE (*) Model and /or type reference AZCE8CB2MOT (USA) (*) Other identification of the product HW version: V1.0 SW Version: V3.5.0 FCC ID: SVS-CB-MOT IC ID: 24685-CBMOT (*) Features SRD, Bluetooth (See data sheet) (*) Manufacturer CORPORACIÓN EMPRESARIAL ALTRA S.L. C/ MARIE CURIE 21, MÁLAGA (29590), SPAIN Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. FCC 47 CFR Part 1.1307: Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. FCC 47 CFR Part 1.1310: Radiofrequency radiation exposure limits. Summary IN COMPLIANCE Approved by (name / position & signature) Miguel Lacave Antennas Lab Manager Date of issue 2023-07-12 Report template No FAN36_02 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 72082RAN.002A1 Page 2 of 10 2023-07-12 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 4 Appendix A: FCC RF Exposure assessment result ..................................................................... 5 General description of the device under evaluation ................................................................ 6 Evaluation Results .................................................................................................................. 6 Appendix B: FCC RF Exposure information ................................................................................ 7 RF Exposure determination of exemption ............................................................................... 8 RF Exposure evaluation ....................................................................................................... 10 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 72082RAN.002A1 Page 3 of 10 2023-07-12 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item under evaluation", "Trademark", "Model and/or type reference", “Other identification of the product”, “Features”, “Manufacturer” and “General description of the device”). 2. Maximum output power, maximum antenna gain and use distance information. DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client Company name: CORPORACIÓN EMPRESARIAL ALTRA S.L. Postal address: C/ MARIE CURIE 21, MÁLAGA (29590), SPAIN Contact person: ALEJANDRO TORRES Telephone / e-mail: +34 900 400 445 / [email protected] DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 72082RAN.002A1 Page 4 of 10 2023-07-12 Document history Report number Date Description 72082RAN.002 2023-04-26 First release 72082RAN.002A1 2023-07-12 Second release: The ISM t…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: 72082REM.002 2023-01-16 ISED CABid: ES1909 Lab Company Number: 4621A Test report No: NIE: 72082REM.002 Test report FCC Rules and Regulations CFR 47, Part 15, Subpart B & Subpart C (10-1-20 Edition) ICES-003 Issue 7 (October 2020) RSS-Gen Issue 5 (April 2018) (*) Identification of item tested CENTRAL FLEXA 4 (*) Trademark AIRZONE (*) Model and /or type reference AZCE8CB2MOT (USA) (*) Derived model not tested AZCE8CB1MOT (EU) Other identification of the product Not provided data (*) Features FCC ID: SVS-CB-MOT IC: 24685-CBMOT HW version: V1.0 SW version: V3.5.0 Features: SRD, Bluetooth (See data sheet) Manufacturer CORPORACIÓN EMPRESARIAL ALTRA S.L. C/ MARIE CURIE 21, MÁLAGA (29590), SPAIN Test method requested, standard FCC Rules and Regulations CFR 47, Part 15, Subpart B & Subpart C (10-1-20 Edition) ICES-003 Issue 7 (October 2020) & RSS-Gen Issue 5 (April 2018) Summary IN COMPLIANCE Approved by (name / position & signature) José Manuel Gómez Industrial & Automotive EMC Lab. Manager Date of issue 2023-01-16 Report template No FDT08_24 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: 72082REM.002 Page 2 of 25 2023-01-16 Index ACRONYMS ................................................................................................................................................................. 3 COMPETENCES AND GUARANTEES ....................................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................................. 4 UNCERTAINTY ............................................................................................................................................................ 4 DATA PROVIDED BY THE CLIENT ............................................................................................................................ 4 USAGE OF SAMPLES ................................................................................................................................................. 5 TEST SAMPLE DESCRIPTION ................................................................................................................................... 6 IDENTIFICATION OF THE CLIENT ............................................................................................................................. 8 TESTING PERIOD AND PLACE .................................................................................................................................. 8 DOCUMENT HISTORY ................................................................................................................................................ 8 ENVIRONMENTAL CONDITIONS ............................................................................................................................... 9 REMARKS AND COMMENTS ................................................................................................................................... 10 TESTING VERDICTS ................................................................................................................................................. 10 LIST OF EQUIPMENT USED DURING THE TEST .......................................................................…

Text truncated - open the document above for the full version.