SWX-UVCG6EDG6 Edge Dome

Federal Communicaons Commission Authorizaon and Evaluaon Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16/02/2026 Ref: A esta on Statement Part 2.911(d)(7) Filing FCC ID: SWX Ubiqui Inc cerfies that, as of the dates of this applicaon, Americas Compliance Consulng LLC dba iCerfi is our designated U.S. agent for service of process for the above referenced FCC ID. Manufacturer accepts to maintain an agent for no less than two year aer the grantee has terminated all marke ng and importaon or the conclusion of any commission-related proceeding involving the equipment. iCerfi accepts, as of the date of the filing of the applicaon, the obligaon of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Informaon: Name: Americas Compliance Consulng LLC dba iCerfi FCC FRN: 0033399411 Address: 5809 US-2, Suite B, Albeni Plaza Priest River, Idaho 83856, United States Contact Person: Paul Preston Tel: +1 (866) 885-4575 Email: fccagent@icerfi.com Sincerely, Ubiqui IncAmericas Compliance Consulng LLC dba iCerfi FRN: 0012268215FRN: 0033399411 Alex MaconPaul Preston [email protected]@icerfi.com 1-408-942-3084+1 (866) 885-4575 Signature: Signature:

Date: March 3, 2026 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) Filing – FCC ID: SWX-UVCG6ED Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization under 47 CFR §2.903. Furthermore, the equipment is not produced or provided by any entity listed on the FCC’s Covered List. This includes, but is not limited to, cybersecurity and antivirus software developed or distributed by Kaspersky Lab, Inc., its successors, or its assignees. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer www.ui.com

Date: March 3, 2026 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(ii) Filing – FCC ID: SWX-UVCG6ED Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List 1 as an entity producing “covered” equipment. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer 1 https://www.fcc.gov/supplychain/coveredlist www.ui.com

Date: March 3, 2026 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-UVCG6ED, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commission’s Rules, Ubiquiti Inc. hereby requests permanent confidential treatment of the accompanying information as outlined below: Block Diagram Schematics Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the important rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alex Macon Ubiquiti lnc. Compliance Manager www.ui.com

Power of Attorney Date: March 3, 2026 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Cerpass Technology Corporation Address : No.10, Lane 2, Lianfu Street, Luzhu District, Taoyuan City, Taiwan R.O.C. e-mail : [email protected] Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Sincerely, Alex Macon Ubiquiti, lnc. Compliance Manager www.ui.com

Ubiquiti Inc. E-Label Information Model: UVC-G6-Edge-Dome A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information On e-label In Manual FCC/ISED ID number Yes No FCC logo / DoC logo No No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes No Class A / B Digital Device user manual statements 1 Yes No Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 Yes No Describe any other FCC regulatory information included in e-label 1 Yes No 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to 784748 D02 e labelling v01 section II D 3(b) The e-label is provided as the below: B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: E-label and warning statements can be found SOP to obtain E-label information can be obtained by Scanning folding QR code. E-label 3 steps SOP as enclosed No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the last page of user manual. C. Labeling for Importation and Purchasing Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC/ISED ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts The FCC ID and model number are present on the product packaging. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided.

CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 1 of 9 FCC ID. : SWX-UVCG6ED Radio Frequency Exposure Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : G6 Edge Dome Model No. : UVC-G6-Edge-Dome Trade Name : UBIQUITI FCC ID. : SWX-UVCG6ED I HEREBY CERTIFY THAT : The sample was received on Feb. 10, 2026 and the testing was completed on Mar. 02, 2026 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 2 of 9 FCC ID. : SWX-UVCG6ED CONTENTS 1. Summary of Test Procedure and Test Results ...................................................................................... 4 1.1. Applicable Standards ................................................................................................................. 4 2. Test Configuration of Equipment under Test ......................................................................................... 5 2.1. Feature of Equipment under Test ............................................................................................... 5 2.2. General Information of Test ........................................................................................................ 6 2.3. Measurement Uncertainty .......................................................................................................... 6 3. Test Equipment and Ancillaries Used for Tests ..................................................................................... 7 4. Radio Frequency Exposure .................................................................................................................. 8 4.1. Applicable Standards ................................................................................................................. 8 4.2. EUT Specification ....................................................................................................................... 9 4.3. Test Result.................................................................................................................................. 9 CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 3 of 9 FCC ID. : SWX-UVCG6ED History of this test report Report No. Issued Date Description 26020073-TRFCC02 Mar. 13, 2026 Original CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 4 of 9 FCC ID. : SWX-UVCG6ED 1. Summary of Test Procedure and Test Results 1.1. Applicable Standards FCC Rules and Regulations Part 2.1091 FCC Rule . Description of Test Result 2.1091 . Radio Frequency Exposure PASS *The lab has reduced the uncertainty risk factor from test equipment, environment and staff technicians which according to the standard on contract. Therefore, the test result will only be determined by standard requirement, measurement uncertainty evaluation is not considered. CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 5 of 9 FCC ID. : SWX-UVCG6ED 2. Test Configuration of Equipment under Test 2.1. Feature of Equipment under Test Operation Frequency Range 2400MHz-2483.5MHz Center Frequency Range 2402MHz-2480MHz Modulation Type GFSK Modulation Technology DTS Data Rate 1Mbps Antenna Type PIFA Antenna Antenna Gain 1.0 dBi Note: For more details, please refer to the User’s manual of the EUT. CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 6 of 9 FCC ID. : SWX-UVCG6ED 2.2. General Information of Test Organization Cerpass Technology Corp. Test Site Cerpass Technology Corporation Test Laboratory Address: No.10, Ln. 2, Lianfu St., Luzhu Dist., Taoyuan City 33848, Taiwan (R.O.C.) Tel: +886-3-3226-888 Fax: +886-3-3226-881 FCC TW1439, TW1079 IC 4934E-1, 4934E-2 Frequency Range Investigated Conducted: from 150kHz to 30 MHz Radiation: from 9kHz to 25,000MHz Test Distance The test distance of radiated emission from antenna to EUT is 3 M. Test Item Test Site Test period Environmental Conditions Tested By RF Conducted RFCON02-NK 2026/03/02 26.1°C / 51% Leon Huang 2.3. Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2). Measurement Item Uncertainty AC Power Line Conduction(150kHz~30MHz) ±3.2dB Radiated Spurious Emission(9kHz~30MHz) ±3.4dB Radiated Spurious Emission(30MHz~1GHz) ±5.2dB Radiated Spurious Emission(1GHz~40GHz) ±5.2dB Conducted Spurious Emission ±2.1dB 6dB Bandwidth ±4.4% 20dB Bandwidth ±4.5% Occupied Bandwidth ±4.4% Peak Output Power(Conducted Power Meter) ±1.1dB Dwell Time / Deactivation Time ±3.5% Power Spectral Density ±2.0dB Duty Cycle ±3.5% CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC02 CERPASS TECHNOLOGY CORP. Issued date : Mar. 13, 2026 T-FD-523-0 V1.1 Page No. : 7 of 9 FCC ID. : SWX-UVCG6ED 3. Test Equipment and Ancillaries Used for Tests Test Item RF Conducted Test Site RFCON01-NK Instrument Manufacturer Model No Serial No Calibration Date Valid Date CAX Signal Analyzer KEYSIGHT N9000B MY57100339 2025/10/23 2026/10/22 Power Meter Anritsu ML2495A 1224005 2026/01/27 2027/01/26 Power Sensor Anritsu MA2411B 1207295 2026/01/27 2027/01/26 Attenuator KEYSIGHT 8491B MY39250703 2026/01/29 2027/01/28 CERPASS T…

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC01 Cerpass Technology Corp. Issued Date : Mar. 13, 2026 T-FD-506-0 Ver 1.8 Page No. : 1 of 61 FCC ID. : SWX-UVCG6ED FCC RADIO TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : G6 Edge Dome Model No. : UVC-G6-Edge-Dome Trade Name : UBIQUITI FCC ID. : SWX-UVCG6ED I HEREBY CERTIFY THAT : The sample was received on Feb. 10, 2026 and the testing was completed on Mar. 02, 2026 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: 26020073-TRFCC01 Cerpass Technology Corp. Issued Date : Mar. 13, 2026 T-FD-506-0 Ver 1.8 Page No. : 2 of 61 FCC ID. : SWX-UVCG6ED CONTENTS 1. Summary of Test Procedure and Test Results ................................................................................ 5 1.1 Applicable Standards ................................................................................................................. 5 2. Test Configuration of Equipment under Test ................................................................................... 6 2.1 Feature of Equipment under Test ............................................................................................... 6 2.2 Carrier Frequency of Channels .................................................................................................. 6 2.3 Test Mode and Test Software ..................................................................................................... 7 2.4 Description of Test System ......................................................................................................... 7 2.5 General Information of Test ........................................................................................................ 8 2.6 Measurement Uncertainty .......................................................................................................... 8 3. Test Equipment and Ancillaries Used for Tests ............................................................................... 9 4. Antenna Requirements ..................................................................................................................... 11 4.1 Standard Applicable ................................................................................................................. 11 4.2 Antenna Construction and Directional Gain ............................................................................. 11 5. Test of AC Power Line Conducted Emission ................................................................................. 12 5.1 Test Limit .................................................................................................................................. 12 5.2 Test Procedures ....................................................................................................................... 12 5.3 Typical Test Setup .................................................................................................................... 13 5.4 Test Result and Data ................................................................................................................ 14 5.5 Test Photographs ..................................................................................................................... 16 6. Test of Spurious Emission (Radiated) ............................................................................................ 17 6.1 Test Limit .................................................................................................................................. 17 6.2 Test Procedures ....................................................................................................................... 18 6.3 Typical Test Setup .................................................................................................................... 19 6.4 Test Result and Data (9kHz ~ 30MHz)..................................................................................... 20 6.5 Test Result and Data (30MHz ~ 1GHz) ................................................................................... 20 6.6 Test Result and Data (Bandedge) ............................................................................................ 22 6.7 Test Result and Data (1GHz ~ 3GHz) ...................................................................................... 28 6.8 Test Result and Data (3GHz ~ 18GHz) .................................................................................... 34 6.9 Test Result and Data (18GHz ~ 25GHz) .................................................................................. 46 6.10 Restricted Bands of Operation ................................................................................................. 48 6.11 Test Photographs (30MHz ~ 1GHz) ......................................................................................... 49 6.12 Test Photographs (1GHz ~ 25GHz) ......................................................................................... 50 7. Test of Spurious Emission (Conducted)......................................................................................... 52 7.1 Test Limit .................................................................................................................................. 52 7.2 Test Procedure ......................................................................................................................... 52 7.3 Test Setup Layout .................................................................................................................... 52 7.4 Test Result and Data ........................................................................…

Text truncated - open the document above for the full version.

G6-Edge-Dome Antenna Datasheet Authorized by: Sony Chayadi Outline •AUT Environment −Instrument Information −Test Method •Antenna Performance −BT Antenna AUT Environment Instrument Information Instrument ListManufacturerCalibration DateCalibration Due Date Transfer SwitchingMVG2025/11/132026/11/12 TX AmplificationMVG2025/11/132026/11/12 RX AmplificationMVG2025/11/132026/11/12 Active SwitchingMVG2025/11/132026/11/12 Network AnalyzerR&S ZNB2025/11/132026/11/12 Radiocom TesterAnritsu MT88212025/11/132026/11/12 Full SystemSG24-Standard2025/11/132026/11/12 Calibration Record •Full system calibration, including each instrument, will proceed once per year. •Regular calibration, including efficiency/peak gain consistency check, will proceed with bi-monthly. Test Method Measurement Standard •To fix device on the turntable, and laser positioning the height level in the center of the probe. •Align the chamber coordinate and UI coordinate. •Sampling the antenna pattern according to Phi increment 5º / Theta increment 5º. •Finished 3D data collection along with Theta-175º~Theta175º and Phi0º~Phi180º •Frequency resolution setup depends on the different bands. X Y Z Antenna Performance [G6-Edge-Dome] Antenna Performance BT Working frequency2400 - 2480 MHz Antenna typePIFA Gain1 dBi Model117-06465 Drawing Manufacturer: Ubiquiti Inc. Address: 685 3 rd Avenue Floor New York, NY 10017 United States