SYW-LAN11SYNCLED ROUND WALL LANTERN, LED SQUARE WALL LANTERN

We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this LED Square Wall Lantern. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric. USE AND CARE GUIDE LED SQUARE WALL LANTERN Questions, problems, missing parts? Before returning to store, visit feit.com/help for further assistance. Model: LAN11SQ/SYNC/BZ Table of Contents Safety Information □ WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly. CAUTION: Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. NOTICE: All electrical connections must be in accordance with local and national standards, National Electric Code (N.E.C.) in the US and Canadian Electrical Code (C.E.C.) in Canada. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. □ □ □ □ Limited Warranty 2WWW.FEIT.COM Supplier’s Declaration of Conformity: 47 CFR § 2.1077 Compliance Information Responsible Party: Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA Unique Identifier: LAN11SQ/SYNC/BZ This product is warrantied to be free from defects in workmanship and materials for up to 3 years from date of purchase. If the product fails within the warranty period, please contact feit electric at [email protected], visit feit.Com/contact-us for instructions on replacement or refund. Replacement or refund is your sole remedy. Except to the extent prohibited by applicable law, any implied warranties are limited in duration to the duration of this warranty. Liability for incidental or consequential damages is hereby expressly excluded. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. CAN ICES-005 (B). RF Exposure. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Operation without Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operation with Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Operation with Smart Bridge . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this LED Round Wall Lantern. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric. USE AND CARE GUIDE LED ROUND WALL LANTERN Questions, problems, missing parts? Before returning to store, visit feit.com/help for further assistance. Model: LAN11RND/SYNC/BZ Table of Contents Safety Information For your safety, always remember to: □ WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly. CAUTION: Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. NOTICE: All electrical connections must be in accordance with local and national standards, National Electric Code (N.E.C.) in the US and Canadian Electrical Code (C.E.C.) in Canada. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. □ □ □ □ Limited Warranty 2WWW.FEIT.COM Supplier’s Declaration of Conformity: 47 CFR § 2.1077 Compliance Information Responsible Party: Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA Unique Identifier: LAN11RND/SYNC/BZ This product is warrantied to be free from defects in workmanship and materials for up to 3 years from date of purchase. If the product fails within the warranty period, please contact feit electric at [email protected], visit feit.com/contact-us for instructions on replacement or refund. Replacement or refund is your sole remedy. Except to the extent prohibited by applicable law, any implied warranties are limited in duration to the duration of this warranty. Liability for incidental or consequential damages is hereby expressly excluded. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. CAN ICES-005 (B). RF Exposure. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Operation without Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operation with Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Operation with Smart Bridge . . . . …

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Feit Electric Company FRN: 0024691990 Contact Name: Aaron Feit Address: 4901 Gregg Road Pico Rivera, California 90660, United States Telephone No: (562) 463-2852-103 Email: [email protected] Applicant: Company name: Feit Electric Company Product Description: LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN Grantee code: SYW FCC ID: SYW-LAN11SYNC Contact Name: Aaron Feit Address: 4901 Gregg Road Pico Rivera, California 90660, United States Telephone No: (562) 463-2852-103 Email: [email protected] [Feit Electric Company ] certifies that, as of the date of this filing of the application with the TCB, [Feit Electric Company ] is our designated US agent for service of process for the above referenced FCC ID. [Feit Electric Company ] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Feit Electric Company ] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The Feit Electric Company is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/05/24 Applicant’s Name: Aaron Feit US Agent’s Name: Aaron Feit Title: President Title: President Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Feit Electric Company Grantee code: SYW FCC ID: SYW-LAN11SYNC Contact Name: Aaron Feit Address: 4901 Gregg Road Pico Rivera, California 90660, United States Telephone No: (562) 463-2852-103 Fax No: (562) 908-6360 Email: [email protected] i. [Feit Electric Company ] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Feit Electric Company ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Feit Electric Company ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2023-05-24 Applicant’s Name: Aaron Feit Title: President Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Feit Electric Company 4901 Gregg Road Pico Rivera, California 90660, United States Declaration letter FCC ID: SYW- Dear Sir, We, Feit Electric Company declare product: LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN with the model numbers LAN11SQ/SYNC/BZ, LAN11RND/SYNC/BZ, LAN11RND/SYNCXXX, LAN11SQ/SYNC/XXX, UWL330/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX, UWL329/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX, there is no electrical change has been made to the equipment that alters the compliance characteristics. These models are the same except for model name, color and shade of the appearance. Please kindly handle on the project. LAN11SYNC Thank you! Sincerely, Signature: Name: Aaron Feit Title: President

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Feit Electric Company Address: 4901 Gregg Road Pico Rivera, California 90660, United States Product Name: LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN Model Number: LAN11SQ/SYNC/BZ, LAN11RND/SYNC/BZ, LAN11RND/SYNCXXX, LAN11SQ/SYNC/XXX, UWL330/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX, UWL329/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX FCC Identifier: SYW-LAN11SYNC We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Aaron Feit Date: 03/24/2023 Title: President Signature of applicant:

C5266091_X10_Ed.2 1/1 Feit Electric Company Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 03/24/2023 Subject: Request for Confidentiality FCC ID: SYW-LAN11SYNC To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Aaron Feit Title: President

5014385 CONFORMS TO UL STD. 1598 CERTIFIED TO CSA STD.C22.2 No. 250.0 5014385 CONFORMS TO UL STD. 1598 CERTIFIED TO CSA STD.C22.2 No. 250.0 25#White PET+pp 49.7*49.7

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC2210308F-1 FCC ID: SYW-LAN11SYNC RF EXPOSURE EVALUATION EUT Specification EUT LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN Model Name LAN11SQ/SYNC/BZ, LAN11RND/SYNC/BZ, LAN11RND/SYNCXXX, LAN11SQ/SYNC/XXX, UWL330/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX, UWL329/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX Frequency band (Operating) 2.402GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others(Bluetooth: 2.402GHz ~ 2.480GHz) Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power -1.99 dBm (0.632mW) Antenna gain -3.49dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure (MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) 300-1500 -- -- F/1500 1500-100000 -- -- 1 Dongguan Nore Testing Center Co., Ltd. Report No.: NTC2210308F-1 FCC ID: SYW-LAN11SYNC Friis transmission formula: Pd=(Pout*G)\(4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result EIRP= E-104.8+20logD=93.26-104.8+20log3=-1.99dBm Max Output power (dBuV/m) Gain Channel Frequency (MHz) Max Output power (dBm) Tolerance Max Tune-U P power (mW) Power density at 20cm (mW/ cm 2 ) Power density Limits (mW/cm 2 ) GFSK 93.26 -3.49 2402 -1.99 ± 0.5 0.710 0.00006 1

Page 1 of 5 Feit Electric Company Specification for approval Customer: Feit Electric Company Antenna model number: LAN11SQ/SYNC/BZ -ANT Antenna type: PCB Antenna Date: 2023.05.09 Page 2 of 5 1. Product Overview & Dimension 1.9cm 1.4cm Page 3 of 5 2. Test Result 2.1 VSWR Frequency (MHz) 2400 2450 2500 VSWR 1.520 1.071 1.462 Page 4 of 5 2. Test Result 2.2 Gain & Efficiency Frequency (MHz) Efficiency (%) Average Gain (dB) Peak Gain (dBi) 2400 4.95 -3.50 -3.49 2450 4.02 -3.63 -3.52 2500 4.64 -3.75 -3.61 Page 5 of 5 2. Test Result Horizontal Vertical

Report No.: NTC2210308FV00 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 27 FCC RADIO TEST REPORT Applicant........................... : Feit Electric Company Address............................. : 4901 Gregg Road Pico Rivera, California 90660, United States Manufacturer...................... : National State Industries Limited Address............................. : XinXing Group, WuLian Village, FengGang Town, DongGuan City, Guangdong Province, 523695 China Factory............................. : National State Industries Limited Address............................. : XinXing Group, WuLian Village, FengGang Town, DongGuan City, Guangdong Province, 523695 China Product Name..................... : LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN Brand Name....................... : Feit, Naspil Model No. ......................... : LAN11SQ/SYNC/BZ (For additional models and model difference refers to section 2.) FCC ID.............................. : SYW-LAN11SYNC Measurement Standard......... : 47 CFR FCC Part 15, Subpart C (Section 15.249) Receipt Date of Samples...... : November 01, 2022 Date of Tested..................... : November 01, 2022 to January 04, 2023 Date of Report..................... : March 11, 2023 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2210308FV00 Page 2 of 27 Table of Contents 1. Summary of Test Result ...................................................................................................................................... 4 2. General Description of EUT ................................................................................................................................ 5 3. Test Channels and Modes Detail ........................................................................................................................ 7 4. Configuration of EUT ........................................................................................................................................... 7 5. Modification of EUT ............................................................................................................................................. 7 6. Description of Support Device ............................................................................................................................. 8 7. Test Facility and Location ................................................................................................................................... 9 8. Applicable Standards and References .............................................................................................................. 10 9. Deviations and Abnormalities from Standard Conditions ................................................................................. 10 10. Test Conditions ............................................................................................................................................... 10 11. Measurement Uncertainty ............................................................................................................................... 11 12. Sample Calculations ....................................................................................................................................... 12 13. Test Items and Results ................................................................................................................................... 13 13.1 Conducted Emissions Measurement ............................................................................................................ 13 13.2 Radiated Spurious Emissions and Restricted Bands Measurement ............................................................ 17 13.3 20dB Bandwidth Measurement ..................................................................................................................... 24 13.4 Antenna Requirement ................................................................................................................................... 26 14. Test Equipment List......................................................................................................................................... 27 Report No.: NTC2210308FV00 Page 3 of 27 Revision History Report Number Description Issued Date NTC2210308FV00 Initial Issue 2023-03-11 Report No.: NTC2210308FV00 Page 4 of 27 1. Summary of Test Result FCC Rules Description of Test Result Remarks §15.207 (a) AC Power Conducted Emission PASS --- §15.249(a)/ 15.209 Radiated Emissions PASS --- §15.249(d)/ 15.205 Band Edge PASS --- §15.215(c) 20dB Bandwidth PASS --- §15.203 Antenna Requirement PASS --- Report No.: NTC2210308FV00 Page 5 of 27 2. General Description of EUT Product Information Product name: LED ROUND WALL LANTERN, LED SQUARE WALL LANTERN Main Model Name: LAN11SQ/SYNC/BZ Additional Model Name: LAN11RND/SYNC/BZ, LAN11RND/SYNCXXX, LAN11SQ/SYNC/XXX, UWL330/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX, UWL329/600/82765LEDP/RGBCCT/ONESYNC/RF-XXX Model Difference: These models have the same circuit schematic, construction, PCB Layout and critical components. Their differences are model name, color and shade of the appearance due to trading purpose. S/N: 2210-6832 Brand Name: Feit, Naspil Hardware version: V1.0 Software version: V1.0 Rating: AC 120V 60Hz Typical arrangement: Table-top I/O Port: N/A Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional information Note: According to model differences and th…

Text truncated - open the document above for the full version.

FCC ID: SYW-LAN11SYNC Test Photo Radiated emission (Below 30MHz) Radiated emission (30-1000MHz) FCC ID: SYW-LAN11SYNC Radiated emission (Above 1000MHz) Conducted Emission