T5U-HB556Wireless HDMI Transmitter

stream high-definition multimedia content from your computer t o your home With QMI Wireless HDMI Transmitter and Receiver, you can wirelessly • Your computer must have an available HDMI port and an available USB port. • Your TV (or o ther e xt ernal display) must have an available HDMI port. NOTE: If the HDMI port o n your TV is occupied with another device , consi de r using an HDMI swit ch purcha sed separat ely f rom an elec tr oni cs r etailer. • For optimal performance, locate the TV adapter no f ur ther than 5 m (16.4 ft) from the PC adapter. 2 Connect the Receiver t o your TV or o ther e xt ernal display and to ext ernal power. Befor e You Begin Components 3 If you connected to a TV, press the inpu t s our ce button on the TV to selec t the HDMI inpu t. Whe n the compo nents are connected co rrec tl y and the correc t s our ce is selec ted , the image on the co mputer display will be shown on the TV. NOTE: If you are using an ext ernal display other than a TV, the display may not ha ve an inpu t s our ce inpu t button and the sour ce may cycle automatically. NOTE: It may t ak e a few seconds for the adapt ers t o link to each other and for the image on the computer t o display on the TV (or o ther e xt ernal display) . 4 If desir ed , attac h the PC adapt er t o the computer u sing the PC adapter clip and insert the Transmitter into the adapter stand. NOTE: If desir ed , y ou can also insert the PC adapter into a stand instead of u sing the clip . OR NOTE: The location of the computer ports may var y. NOTE: If the PC adapt er li gh t does n ot turn on after connecting with the USB ca ble, tr y connecting with the USB splitter cable instead. 1 Connect the Transmitter t o the computer. *The source button, u pgr ade port, a nd menu button can be used only during and after a software upgr ade. 1 Power l ight • On: T he adapter i s on. • Off: T he adapter i s off. 2 Link l ight • On: T he adapter i s linked t o t he PC adapter. • Blinking: T he adap ter i s attempting t o link to t he PC adapter. 3 Source button* 4 Upgrade port* 5 HDMI p ort: Conn ects t he adapter to your T V. 6 Power c onnector: Conn ects t he adapter t o external p ower. 7 Menu button* Receiver Stands and Clip 1 Adapter stands (2): Use t he s tands to store the adapters i n a vertical ori entat ion. 2 PC adapter clip: Use t he clip t o attach t he PC adapter t o your notebook PC display t o save valuable desk space and provide enh anced mobility. 2 1 *The r eset button is only used during a software upgr ade. T he power/upgr ade port is also used during a software upgr ade. 1 Power l ight • On: T he adapter i s on. • Off: T he adapter i s off. 2 Link l ight • On: T he adapter i s linked t o t he TV adapter. • Blinking: T he adapter i s attempt- ing t o link to t he TV adapter. 3 Power/upgrade port*: Conn ects the adapter t o your c omputer. 4 HDMI p ort: Conn ects t he adapter to your c omputer. 5 Reset b utton* Transmitter 1 Power adapter and cable: Conn ects t he TV adapter t o external p ower. 2 HDMI c ables ( 2): • Short c able: Conn ects t he PC adapter t o your c omputer. • Long cab le: Conn ects t he TV adapter t o your T V or o ther external d isplay. 3 USB cable: C onn ects t he PC adapter t o your c omputer. 4 USB splitter cable: Conn ects t he PC adapter t o 2 USB ports on your c omputer when a single USB port d oes not p rovide enough power for t he adapter. Cables 1 3 4 2 8/16/2010 11:48:05 AM QMI Wireless HDMI Transmitter & Receiver Qui ck Setu p entertainment Regulatory and Safety Notices Federal Communications Commission notice This equipment has been t est ed and found to compl y with the limits for a Cla ss B digit al device , pursuant to Par t 1 5 of the FCC Rules. T hese limits are desi gned to provi de rea sona ble protec ti on against harmf ul in terference in a resi dential installation. T his equipment gene rat es, u ses, and can radiat e r adio f req ue nc y ene rgy and, if not installed and used in accordance with the instr ucti ons , may cause harmf ul interference to r adio communications . However, there is no guaran tee that interference will not occur in a parti cular ins tallation. If this equipment does cause harmf ul interference to r adio or t ele visi on r eception, whi ch can be determined by turning the equipment o ff and on, the user is encour aged to try t o correc t the interference by one or more o f the follo wing measur es: • Reo rient or r elocate the receiving antenna. • Inc rea se the separati on betwee n the equipment and receiver. • Connect the equipment t o an outle t o n a cir cuit different from that to whi ch the receiver is connected . • Consult the dealer o r an experienced radio or t ele visi on t ec hnician for help . expressl y approved by HP may void the user’s auth orit y t o operat e the equipment. Cables To maintain compli ance with FCC Rules and Regulations , connecti ons to this device must be made with shi elded cables having metallic RFI/EMI connector h oods. Dec lar ation of Confor mity f or products mar ked wit h the FCC l og o (U nited State s only) This device compli es with Par t 1 5 of the FCC Rules. Operati on is subject t o the follo wing 2 conditions: 1. This device may not cause harmf ul interference. 2.T his device must accept any interference received , including interference that may cause undesir ed operati on. Canada notices This Cla ss B digit al apparatus meets all req uir ements of the Canadian Interference-C ausing Equipment in terference. T he second is that the wir ele ss device must accept any interference, including interference that may cause undesir ed operati on of the device . CAUT ION: Whe n using IEEE 802.11a wir ele ss L AN, this product is restricted to indoor u se, due to its operati on in the 5.15 t o 5.2 5 GHz freq ue nc y r ange. Industr y Canada req uir es this product t o be used indoors f or the freq ue nc y r ange of 5 .15 GHz to 5.2 5 GHz to r educe the potential for harmf ul in terference to co -c hannel mobil…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

HP LOGO: Process = Prin ted Color = PMS 877C CONNECTOR ICONS: Process = Pad Prin ted Color = PMS 877C REAR IO HOUSING: Mater ial = Plastic Plastic Color = Black Plastic Finish = Matt e/ MT11010 or less Surface = Bar e Plastic *r ear housing is heat staked to top housing FRONT HOUSING: Mater ial = Plastic Plastic Color = Black Plastic Finish = Matt e/ MT11010 or less Surface = Bar e Plastic *front housing is heat staked to top housing LABEL: Siz e need to be small as possible The label area should be recessed 0.3mm for its location FEET 4X: Mater ial = Rubber Rubber Color = Black Rubber Finish = MT11020 BOTTOM HOUSING: Mater ial = LG ‘L upoy’ Lupoy Color = Black Lupoy Finish = High Gloss Surface = Bar e Lupoy TOP HOUSING: Mater ial = LG ‘L upoy’ Lupoy Color = Black Lupoy Finish = High Gloss Surface = Bar e Lupoy wireless HDMI transmitter REGULATORY INFO: Process = Printed Color = PMS 877C E142692 LISTED I.T.E HB556 Wireless HDMI Transmitter

Page 3 Page 4 Page 5 Page 6

Product name: Wireless HDMI transmitter/PC Adaptor Model Name: HB556/HSTNN-QR01 Brand Name: Quanta Microsystems, Inc/Hewlett-Packard Company Description The HM516 is a WHDI wireless A/V transmitter; it works together with HM517 WHDI wireless A/V receiver to deliver A/V streams wirelessly. The highest resolution for video stream is 1080p/60Hz and the audio stream bandwidth can support up to 8 PCM audio channels. Features z 2 transmit and 1 receive antenna z Transmission Range – 5 to 10 meters z Video – up to 1080p/60Hz z Audio – One I2S channel and one SPDIF channel with 48kHz z 4.9 – 5.9GHz unlicensed band z RGB/YCbCr color space with 10-bit color z Video Formats - 480i, 480p, 576i, 576p, 720p, 1080i, 1080p - VGA (640x480) - SVGA (800x600) - XGA (1024x768) - SXGA (1280x1024) - UXGA (1600x1200) - 854x800, 1280x768, 1366x768 z Audio Formats - 8 PCM streams (48kHz x 24 bit) - S/PDIF DTS, Dolby TrueHD, Dolby Digital Plus, AC-3 (5.1 channel) z HDCP 1.0 Specification Interface Digital video: 30-bit RGB or YCrCb Digital audio: I2S and SPDIF Two-Wire serial bus slave interface One interrupt line Network Standard 5GHz unlicensed band Modulation OFDM/16QAM Technique Proprietary Operating Frequency 5.15GHz to 5.850GHz Transfer data rate 63Mbps TX Duty Cycle 95% RF Power 2T1R ; 9 +/- 0.4 dBm each path; total 12 dBm max. Operating Channels 5190MHz / 5230MHz / 5755MHz / 5795 MHz / 5835 MHz Antenna With PCB integrated antennas. Antenna Connector N/A Antenna Gain(Max.) 4.7dbi@5190MHz; 4.7dbi@5310MHz; 5.0dbi@5550MHz; 5.8dbi@5835MHz Supply Voltage 5.25V~4.75V Power Consumption 5 w typically I/O Definition Connector Description Remark Tact Switch (1) For firmware upgrade. Act with USB connector Mini USB To receive 5V power supply from power source For firmware upgrade. Act with Tact Switch (1) HDMI connector HDMI Receptacle connector. To input HDMI signals from generator Function Block Diagram Tx RFIC AMN3110 Tx BB AMN2120 ANT ANT ANT ANT ANT BALUN BALUN BALUN BALUN BALUN PA PA PA PA LPF LPF LPF LPF BPF HDMI Rx CAT6023 μC STM32F103CBT6 USB connector Flash 40MHz 27MHz 16MHz CLK40M Tx I/Q Rx I/Q RSSI PA enable SPI Reset WHDI bus D0~35 WHDI DCLK ResetHDMI INT 5V→3.3V 5V→1.8V 5V→1.0V USB D+/D- HDM I connector TMDS DDC LED (Power ON) LED (Link) GPIO HPD 3.3V 1.8V 3.3V 3.3V 3.3V 1.0V 3.3V EDID EEPROM SPI SPI INT I2C I2S SPDIF Tx RFIC AMN3110 Tx BB AMN2120 ANT ANT ANT ANT ANT BALUN BALUN BALUN BALUN BALUN PA PA PA PA LPF LPF LPF LPF BPF HDMI Rx CAT6023 μC STM32F103CBT6 USB connector Flash 40MHz 27MHz 16MHz CLK40M Tx I/Q Rx I/Q RSSI PA enable SPI Reset WHDI bus D0~35 WHDI DCLK ResetHDMI INT 5V→3.3V 5V→1.8V 5V→1.0V USB D+/D- HDM I connector TMDS DDC LED (Power ON) LED (Link) GPIO HPD 3.3V 1.8V 3.3V 3.3V 3.3V 1.0V 3.3V EDID EEPROM SPI SPI INT I2C I2S SPDIF 2 TX path reserved for develop NOT apply for this version.

Report No.: SA990714C10 Report Format Version 3.0.1. 1 RF EXPOSURE REPORT REPORT NO.: SA990714C10 MODEL NO.: HB556, HSTNN-QR01 FCC ID: T5U-HB556 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Quanta Microsystems, Inc. ADDRESS: 188 Wenhwa 2nd Rd., Kueishan Hsiang Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Report No.: SA990714C10 Report Format Version 3.0.1. 2 1. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 3. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 4. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5190-5230 12.4 4.7 20 0.010 1.00 5755-5795 11.9 5.8 20 0.012 1.00

Report No.: RF990714C10 1 Report Format Version 3.0.1 FCC TEST REPORT (15.247) REPORT NO.: RF990714C10 MODEL NO.: HB556 (Refer to item 3.1 for the more details) FCC ID: T5U-HB556 RECEIVED: Jul. 22, 2010 TESTED: Aug. 10 ~ Aug. 26, 2010 ISSUED: Aug. 27, 2010 APPLICANT: Quanta Microsystems, Inc. ADDRESS: 188 Wenhwa 2nd Rd., Kueishan Hsiang Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 40 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF990714C10 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION ...................................................................................................... 4 2. SUMMARY OF TEST RESULTS .............................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 5 3. GENERAL INFORMATION....................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 6 3.2 DESCRIPTION OF TEST MODES........................................................................... 7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................... 7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................... 8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 10 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................... 10 4. TEST TYPES AND RESULTS (FOR 5.0GHz BAND)............................................. 11 4.1 RADIATED EMISSION MEASUREMENT .............................................................. 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT............................................ 11 4.1.2 TEST INSTRUMENTS............................................................................................ 12 4.1.3 TEST PROCEDURES ............................................................................................ 13 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 13 4.1.5 TEST SETUP ......................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 14 4.1.7 TEST RESULTS ..................................................................................................... 15 4.2 CONDUCTED EMISSION MEASUREMENT ......................................................... 18 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 18 4.2.2 T EST INSTRUMENTS........................................................................................... 18 4.2.3 TEST PROCEDURES ............................................................................................ 19 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 19 4.2.5 TEST SETUP ......................................................................................................... 20 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 20 4.2.7 TEST RESULTS ..................................................................................................... 21 4.3 6dB BANDWIDTH MEASUREMENT ..................................................................... 23 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ................................................... 23 4.3.2 TEST INSTRUMENTS............................................................................................ 23 4.3.3 TEST PROCEDURE .............................................................................................. 23 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 24 4.3.5 TEST SETUP ......................................................................................................... 24 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 24 4.3.7 TEST RESULTS ..................................................................................................... 25 4.4 MAXIMUM OUTPUT POWER ................................................................................ 26 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT ................................ 26 Report No.: RF990714C10 3 Report Format Version 3.0.1 4.4.2 INSTRUMENTS...................................................................................................... 26 4.4.3 TEST PROCEDURES ............................................................................................ 26 4.4.4 DEVIATION FROM TEST STANDARD .................................................................. 27 4.4.5 TEST SETUP ......................................................................................................... 27 4.4.6 EUT OPERATING CONDITIONS ........................................................................... 27 4.4.7 TEST RESULTS ..................................................................................................... 28 4.5 POWER SPECTRAL DENSITY MEASUREMENT................................................. 29 4.5.1 LIM…

Text truncated - open the document above for the full version.

Report No.: RF990714C10-2 1 Report Format Version 3.0.1 FCC TEST REPORT (15.249) REPORT NO. :RF990714C10-2 MODEL NO. :HB556 (Refer to item 3.1 for the more details) FCC ID:T5U-HB556 RECEIVED :Jul. 22, 2010 TESTED :Aug. 10 ~ Aug. 26, 2010 ISSUED :Aug. 27, 2010 APPLICANT : Quanta Microsystems, Inc. ADDRESS : 188 Wenhwa 2nd Rd., Kueishan Hsiang Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 24 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF990714C10-2 2 Report Format Version 3.0.1 Table of Contents 1. CERTIFICATION .......................................................................................................3 2. SUMMARY OF TEST RESULTS ...............................................................................4 2.1 MEASUREMENT UNCERTAINTY ............................................................................4 3. GENERAL INFORMATION........................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..........................................................................5 3.2 DESCRIPTION OF TEST MODES............................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...........................................8 3.4 DESCRIPTION OF SUPPORT UNITS ......................................................................8 4. TEST TYPES AND RESULTS ...................................................................................9 4.1 RADIATED EMISSION MEASUREMENT .................................................................9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................................9 4.1.2 TEST INSTRUMENTS ............................................................................................10 4.1.3 TEST PROCEDURES ............................................................................................. 11 4.1.4 DEVIATION FROM TEST STANDARD ................................................................... 11 4.1.5 TEST SETUP ..........................................................................................................12 4.1.6 EUT OPERATING CONDITIONS ............................................................................12 4.1.7 TEST RESULTS ......................................................................................................13 4.2 CONDUCTED EMISSION MEASUREMENT ..........................................................15 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................15 4.2.2 TEST INSTRUMENTS ............................................................................................15 4.2.3 TEST PROCEDURES .............................................................................................16 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................16 4.2.5 TEST SETUP ..........................................................................................................17 4.2.6 EUT OPERATING CONDITIONS ............................................................................17 4.2.7 TEST RESULTS ......................................................................................................18 4.3 BAND EDGES MEASUREMENT ............................................................................20 4.3.1 LIMITS OF BAND EDGES MEASUREMENT .........................................................20 4.3.2 TEST INSTRUMENTS ............................................................................................20 4.3.3 TEST PROCEDURE ...............................................................................................20 4.3.4 DEVIATION FROM TEST STANDARD ...................................................................20 4.3.5 EUT OPERATING CONDITION ..............................................................................20 4.3.6 TEST RESULTS ......................................................................................................21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..............................................22 6. INFORMATION ON THE TESTING LABORATORIES ............................................23 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.....................................................................................24 Report No.: RF990714C10-2 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: Wireless HDMI Transmitter (Refer to item 3.1 for the more details) MODEL NO.: HB556 (Refer to item 3.1 for the more details) BRAND: QMI (Refer to item 3.1 for the more details) APPLICANT: Quanta Microsystems, Inc. TESTED: Aug. 10 ~ Aug. 26, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: HB556) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations re…

Text truncated - open the document above for the full version.

Report No.: RF990714C10-1 1 Report Format Version 3.0.1 FCC TEST REPORT (15.407) REPORT NO.: RF990714C10-1 MODEL NO.: HB556 (Refer to item 3.1 for the more details) FCC ID: T5U-HB556 RECEIVED: Jul. 22, 2010 TESTED: Aug. 10 ~ Aug. 26, 2010 ISSUED: Aug. 27, 2010 APPLICANT: Quanta Microsystems, Inc. ADDRESS: 188 Wenhwa 2nd Rd., Kueishan Hsiang Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 45 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF990714C10-1 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION...................................................................................................... 4 2. SUMMARY OF TEST RESULTS ............................................................................. 5 2.1 MEASUREMENT UNCERTAINTY........................................................................... 5 3. GENERAL INFORMATION ...................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 6 3.2 DESCRIPTION OF TEST MODES .......................................................................... 7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ..................................................... 7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 10 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 10 4. TEST TYPES AND RESULTS ............................................................................... 11 4.1 RADIATED EMISSION MEASUREMENT ............................................................. 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ........................................... 11 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ......... 11 4.1.3 TEST INSTRUMENTS........................................................................................... 12 4.1.4 TEST PROCEDURES ........................................................................................... 13 4.1.5 DEVIATION FROM TEST STANDARD.................................................................. 13 4.1.6 TEST SETUP......................................................................................................... 14 4.1.7 EUT OPERATING CONDITION............................................................................. 14 4.1.8 TEST RESULTS .................................................................................................... 15 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 18 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...................................... 18 4.2.2 TEST INSTRUMENTS........................................................................................... 18 4.2.3 TEST PROCEDURES ........................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD.................................................................. 19 4.2.5 TEST SETUP......................................................................................................... 20 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 20 4.2.7 TEST RESULTS .................................................................................................... 21 4.3 MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT .......................... 23 4.3.1 LIMITS OF MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT........ 23 4.3.2 TEST INSTRUMENTS........................................................................................... 23 4.3.3 TEST PROCEDURE.............................................................................................. 24 4.3.4 DEVIATION FROM TEST STANDARD.................................................................. 24 4.3.5 TEST SETUP......................................................................................................... 24 4.3.6 EUT OPERATING CONDITIONS .......................................................................... 24 4.3.7 TEST RESULTS .................................................................................................... 25 4.4 PEAK POWER EXCURSION MEASUREMENT ................................................... 27 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT................................. 27 4.4.2 TEST INSTRUMENTS........................................................................................... 27 4.4.3 TEST PROCEDURE.............................................................................................. 27 4.4.4 DEVIATION FROM TEST STANDARD.................................................................. 28 4.4.5 TEST SETUP......................................................................................................... 28 4.4.6 EUT OPERATING CONDITIONS .......................................................................... 28 4.4.7 TEST RESULTS .................................................................................................... 29 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT ..................................... 31 4.5.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT................... 31 4…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST