T990584008PROFLAME G-FIRE

Operating manual A) Transmitter 1. There are 1 pressed key on the launcher’s kneading board and 1 2-grade switch on the side of the launcher 2. Use 3 7th “AAA” battery to supply power 3. Turn the switch on the side of the launcher to “ON” and press the key, the LED turns on and loose the key, the LED turns off. 4. Turn the switch on the side of the launcher to “OFF”. It wouldn’t be any response when press the key B) Receiver 1. There is a 3-grade switcher on the receiver’s kneading board. 2. Use 4 “AA” battery to supply power 3. When turns the switch on the kneading board to “ON”, the receiver will turn on automatically and at this moment, the remoter has no response when press the remoter. Turn the switch to on the kneading board “OFF”, the receiver will turn off directly, and at this moment, the remoter has no response when press the remoter. When turns the switch to “REMOTE”, the gas fireplace will be controlled by the remoter. 4. When the receiver primary receives the effective code sent out by the launcher, it will sound three "Bi - " sound to indicate that the receiver is learning the code. In order to guarantee learning quality, when it learns, please let the receiver in the 2m areas. 5. Every receiver can learn 2 kinds of codes. It means that every receiver can accept 2 launcher’s control. 6. The receiver code only can work in 3 minutes after the receiver get power. The receiver cannot learn code only if exceed 3 minutes unless get power again. 7. When the receiver receives effective codes, if in off condition it will sound a “Bi—” sound and then turn on receiver but if in on condition it will sound 2 “Bi—” then turn off receiver. 8. The effective receive distance is 10m. 9. The life of battery is 5 months. Federal Communications Commission (FCC) Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Note: The manufacturer is not responsible for any radio of TV interference caused by unauthorized modification to this equipment. Such modification could void the user’s authority to operate the equipment.

CONFIDENTIALITY FORM Date: July 31, 2006 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. SIT LA PRECISA S.p.A. would like the following documents regarding this submission for FCC ID: T990584008 to be kept confidential. 1. Schematic 2. Block Diagram 3. Operational Description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Li Hai Bo

Applicant: SIT LA PRECISA S.p.A. FCC ID: T990584008 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper label. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/Proposed FCC ID Label Location FCC ID: T990584008

Applicant: SIT LA PRECISA S.p.A. FCC ID: T990584008 EUT inside whole view Main board component side Main board solder side

The test report consists 18 pages in total. It may be duplicated completely for legal use with the allowance of the applicant. It shall not be reproduced except in full, without the written approval of Ke Mei Ou Laboratory Corporation. The test result in the report only applied to the tested sample. FCC TEST REPORT Under : FCC 15 Subpart C, Paragraph 15.231 Prepared For : SIT LA PRECISA S.p.A. Viale dell’ Industria 31,33 35129 Padova - Italy July 28, 2006 FCC ID: T990584008 EUT: Proflame G-Fire Model: 0584008 Report Type: Original Report Test Engineer: Jacky Huang Test Date: May 6, 2006 Review By: Apollo Liu / Manager FEDERAL COMMUNICATIONS COMMISSION Registration Number: 125782 INDUSTRY CANADA Registration Number: IC4986 Ke Mei Ou Laboratory Co., Ltd. 7A, Jiaxiangge, Jiahuixincheng, No.3027, Shennan Rd., Futian, Shenzhen, Guangdong, P.R.China. Zip Code: 518033 Tel: + 86 755 83642690 Fax: + 86 755 83297077 www.kmolab.com SIT LA PRECISA S.p.A. FCC ID: T990584008 KMO FCC ID Report Report #: KSZ2006042801J Page 2 of 2 TABLE OF CONTENTS 1. General Information....................................................................................................................................................3 1. 1 Notes......................................................................................................................................................................3 1. 2 Testing Laboratory..................................................................................................................................................3 1. 3 Details of Applicant................................................................................................................................................3 1. 4 Application Details..................................................................................................................................................3 1. 5 Test Item.................................................................................................................................................................3 1. 6 Test Standards.........................................................................................................................................................3 2. Technical Test...............................................................................................................................................................4 2. 1 Summary of Test Results.........................................................................................................................................4 3. EUT Modifications.......................................................................................................................................................4 4. Conducted Power Line Test.........................................................................................................................................5 4. 1 Test Equipment.......................................................................................................................................................5 4. 2 Test Procedure........................................................................................................................................................5 4. 3 Test Setup...............................................................................................................................................................5 4. 4 Configuration of The EUT.......................................................................................................................................6 4. 5 EUT Operating Condition........................................................................................................................................6 4. 6 Conducted Power Line Emission Limits..................................................................................................................7 4. 7 Conducted Power Line Test Result...........................................................................................................................7 5. Radiated Emission Test................................................................................................................................................8 5. 1 Test Equipment.......................................................................................................................................................8 5. 2 Test Procedure........................................................................................................................................................8 5. 3 Radiated Test Setup.................................................................................................................................................8 5. 4 Configuration of The EUT.......................................................................................................................................9 5. 5 EUT Operating Condition........................................................................................................................................9 5. 6 Radiated Emission Limit.........................................................................................................................................9 5. 7 Radiated Emission Test Result...............................................................................................................................10 6. Technical Characteristic.............................................................................................................................................11 6. 1 Band Edge............................................................................................................................................................11 6.1.1 Test Equipment...................................................................................................................................................11 6.1.2 Test Proc…

Text truncated - open the document above for the full version.

Applicant: SIT LA PRECISA S.p.A. FCC ID: T990584008 Radiated emission test view