TAPMC-ST1323BTinduction cooker

Firstbuild.com Safety Information ........2-3 Box Contents .................4 Using The Cooktop Cooktop Operation & App ........5 Cooking in Direct Mode .......... Cooking in Precise Mode......... 6 7 Cleaning & Care Cleaning the Cooktop Glass ..... . 8 The Paragon Probe ......... . . . . . . 9 FAQ Warranty Information ... . . . . . . .12 Parag o n Precis i o n C ookto p Write the model and serial numbers here: Model # _____________________ Serial # ______________________ You can find them on a label under the cooktop. Choosing Cookware .... . . . . . . . . .10 Error & Miscellaneous Codes .... 11 For the latest information, please visit www.paragoninduction.com This appliance is not intended to be used by children. Children should be supervised when cooktop is in use. Do not store items of interest to children above the cooktop, children climbing on the cooktop to reach items could be seriously injured. Use this cooktop only for its intended purpose as described in this Use & Care Guide. Do not use this appliance for other than intended use, household use only. Do not use outdoors. Do not attempt to repair or replace any part The power cord is over 1.4 meters in length; to reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking o parts. To prevent electrical shock, do not immerse cord, plugs or the unit in water for cleaning. Do not operate any appliance with a damaged cord or plug or a er the appliance malfuctions or has been damaged in any manner. Return appliance to the nearest facility for examination, repair or adjustment. See page 12 for more info. of your cooktop. See page 12 for more info. CAUTION: Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units. Do not use a towel or other bulky cloth in place of pot holders. . Do not touch surface elements as they may still be hot during and a er use. Allow su…cient time for cooling first. Do not heat unopened food containers. Pressure could build up and the container could burst, Do not let cord hang over edge of table or counter, or touch hot surfaces. causing an injury. GENERAL SAFETY INSTRUCTIONS Do not store or use flammable materials near The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. the cooktop, including paper, plastic, pot holders, linens, wall coverings, curtains, drapes and gasoline or other flammable vapors and liquids. Do not let cooking grease or other flammable materials accumulate in or near the cooktop. Grease on the cooktop may ignite. In the event of a fire, do not use water or grease on fires. Never pick up a flaming pan. Turn the controls o & unplug the cooktop. Smother a flaming pan on a surface unit by covering the pan completely with a well-fitted lid, cookie sheet or flat tray. Use a multi-purpose dry chemical or a foam-type fire extinguisher. Never leave the Paragon Cooktop unattended at medium or high heat settings. Use the proper pan size - select cookware having flat bottoms within a size range of 6 to 11 inches in diameter. Do not place on or near a hot gas or electric burner, or in a heated oven. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. To disconnect, turn any control to o, then remove plug from wall outlet. Failure to do so may result in fire or personal injury. READ AND SAVE THESE INSTRUCTIONS Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death. When using electrical appliances, basic safety precautions should always be followed, including the following: WARNING: IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. S AFET Y INF ORMA TION KEEP FLAMMABLE MATERIALS AWAY FROM THE COOKTOP WARNING WARNING: 2 :Persons with a pacemak- er or similar medical device should exercise caution when using or standing near an induction cooktop while it is in operation. The electromag- netic field may aect the working of the pace- maker or similar medical device. It is advisable to consult your doctor or the pacemaker manufac- turer about your particular situation. IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. READ AND SAVE THESE INSTRUCTIONS S AFET Y INF ORMA TION Use care when touching the cooktop. The glass surface of the cooktop will retain heat aer the controls have been turned o. Do not cook on a broken cooktop. If the glass cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact FirstBuild for support questions. Avoid scratching the glass cooktop. The cooktop can be scratched with items such as knives, sharp instruments, rings or other jewelry, and rivets on clothing. Use CERAMA BRYTE ® ceramic Cooktop Cleaner and CERAMA BRYTE ® Cleaning Pad to clean the cooktop. Be sure to only clean when the cooking surface is cool, a wet sponge or cloth on a hot surface can cause steam burns. Some cleaners can produce noxious fumes if applied to a hot surface. Read and follow all instructions This appliance has a POLARIZED plug (one blade that is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. A power-supply cord should be used to reduce the risk resulting from becoming entangled in or tripping over a cord. and warnings on the cleaning cream label. NOTE: Sugary spills are an exception Do not place metallic spoons, forks, knives or plates on the cooktop surface, as they may interact with…

Text truncated - open the document above for the full version.

Guangdong MD Consumer Electric Manufacturing Co., Ltd 022311 – 6 Authority to Act as Agent Date: 2015-12-04 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _____ SGS-CSTC Standards Technical Services Co., Ltd._____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 – 12 months)_____ By: __________________________ _______ Pan Ian__________ (Signature 1 ) (Print name) Title: ___ Certificate Administrator _____ On behalf of: ____ Guangdong MD Consumer Electric Manufacturing Co., Ltd _ (Company Name) Telephone: _8675726334263 ___ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Guangdong MD Consumer Electric Manufacturing Co., Ltd 022311 – 6 Request for Confidentiality Date: _2015-12-04_____ Subject: Confidentiality Request for FCC ID:__TAPMC-ST1323BT Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ____Guangdong MD Consumer Electric Manufacturing Co., Ltd_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ ________Pan Ian________________ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

External Photo

Label location

55mm 55mm FCC ID: TAPMC-STW1323BT contains FCC ID: ZKJ-BLEA003 Date code: xxxx This product complies with FCC rule parts 18 Induction Cooker Model: MC-ST1323BT Power: Voltage/Frequency: 120V~ 60Hz CAUTION:DO NOT IMMERSE IN WATER NE PAS IMMERGER HOUSEHOLD USE ONLY POUR USAGE DOMESTIQUE SEULEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. xxxx 代表年月，根据订单评审变更

Internal Photo

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, G uangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: ee. [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 Report No.: GZEM151000552701 Page: 1 of 18 FCC ID: TAPMC-ST1323BT Authorized Signature: Kobe Jian Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 Cover Page TEST REPORT The following sample(s) was/were submitted and identified on behalf of the client as: Application No.: GZEM1510005527HS Applicant: Guangdong MD Consumer Electric Manufacturing Co.,Ltd Manufacturer: Same as the applicant. FCC ID: TAPMC-ST1323BT Product Description: induction cooker Model No.: MC-STW1323BT Standards: CFR 47 FCC PART 18: 2014 Date of Receipt: 2015-10-30 Date of Test: 2015-11-02 to 2015-11-05 Date of Issue: 2015-12-07 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM151000552701 Page: 2 of 18 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-12-07 Original Authorized for issue by: Tested By 2015-11-02 to 2015-11-05 (Terry Lai) / Project Engineer Date Prepared By 2015-12-04 (June Chen) / Clerk Date Checked By 2015-12-07 (Crystal Wang) / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM151000552701 Page: 3 of 18 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 3 Test Summary Electromagnetic Interference (EMI) Test Test Requirement Test Method Class / Severity Result Conducted Emi…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 CONDUCTED EMISSIONS, 9 KHZ TO 30 MHZ TEST SETUP 1.2 RADIATED EMISSIONS, 9 KHZ TO 30 MHZ TEST SETUP