TCN024Wall Terminal

Annex A 1-2776/21-01-01_AnnexA External photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Tobias Wittenmeier Testing Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2022-07-20Document No. 1-2776/21-01-01_AnnexA2/4 Photo 3 Photo 4 2022-07-20Document No. 1-2776/21-01-01_AnnexA3/4 Document history VersionApplied changesDate of release initial release2022-07-20 - END OF DOCUMENT - 2022-07-20Document No. 1-2776/21-01-01_AnnexA4/4

Label und Location Info – WT 300 / WT 310 Produkt Ansichten der Vorderseite (dem Nutzer zugewand) WT 310 Ettikett / Typenschild (17,5 x 8) mm² Verpackung Ettikett / Typenschild: (47 x 84) mm² Häfele Hafeti: Name Hersteller + Anschrift S/N Etikett Label und Location Info – WRU 400 / WRU 410 Produkt Ansichten der Vorderseite (dem Nutzer zugewand) WRU 410 Ettikett / Typenschild (17,5 x 8) mm² Verpackung Ettikett / Typenschild : (47 x 84) mm² Häfele Hafeti: Name Hersteller + Anschrift S/N Etikett

Annex B 1-2776/21-01-01_AnnexB Internal photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Tobias Wittenmeier Testing Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2022-07-20Document No. 1-2776/21-01-01_AnnexB2/4 Photo 3 2022-07-20Document No. 1-2776/21-01-01_AnnexB3/4 Document history VersionApplied changesDate of release initial release2022-07-20 - END OF DOCUMENT - 2022-07-20Document No. 1-2776/21-01-01_AnnexB4/4

BNetzA - CAB - 02/21 - 102 SAR Test exclusion documentation according to FCC KDB 447498, RSS-102 Report identification number: 1-2776/21-01-10 Exclusion (FCC) contains the module with the following certification numbers FCC ID TCN-024 This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-2776/21-01-10 © CTC advanced GmbH Page 2 of 4 EUT technologies: Technologies: Max. declared cond. AVG Power Max. measured EIRP @ 30m 1) Antenna gain MAX EIRP for RF exposure NFC 13.56 MHz 22.55 dBm (180 mW) 3) 43.1 dBμV (Peak) = -32.16 dBm < 0 dBi 22.55 dBm (180 mW) BT LE 2450 MHz 2) 8.0 dBm (6.31 mW) -- 4.9 dBi 12.9 dBm (14.5 mW) NOTE: The measured PEAK EIRP @30m proofs that the EUT antenna gain is far below 0dBi and that considering the max. declared output power of 22.55 dBm (=180 mW) is by far larger than the EIRP. Thus for it is correct to use the conducted value as the worst case base for the RF exposure calculation. 1) Test result taken from CTC advanced GmbH report 1-2776/21-01-05-B. 2) Values for BT LE 2450 MHz according customer declaration. 3) Max. power from data sheet – WRU 400/410: 0.6 W (Duty Cyle 30%) Collocation overview: Active scenario: Technology 1 2 3 4 NFC 13.56 MHz x x BT LE 2450 MHz x x Declared minimum safety distance: 20cm According the manual a safety distance of 20cm shall be applied between the user (and/or bystanders) to the EUT antenna whilst active transmitting. Test report no.: 1-2776/21-01-10 © CTC advanced GmbH Page 3 of 4 SAR test exclusion according to KDB447498 (General RF Exposure Guidance v06) (3a) Standalone SAR test exclusion below 100 MHz at test separation distances > 50mm and < 200mm ( Threshold 100MHz > 50mm ) × (1+log(100/f)) where Threshold 1-g;10-g is 3 for 1-g; 7.5 for 10-g d seperation is the min. test separation distance ( >50mm and <200mm ) f is the RF channel transmit frequency Threshold 50mm; 100MHz < 50mm is Threshold 1-g;10-g × d / f 0.5 with f = 100MHz and d=50mm Threshold 100MHz > 50mm is (Threshold 50mm; 100MHz < 50mm ) + (d seperation -50mm ) × f / 150 with f = 100MHz The table below gives the calculated maximal power that could be used for source based time averaged conducted power, adjusted for tune up tolerance. If this is below the calculated value SAR testing is excluded. frequency d separation Powerlimit [MHz] [mm] < 50mm > 50mm [mW] [dBm] [mW] 13.56 199.99 3 128.64 228.63 427.03 22.55 180 yes Threshold 1-g P max-declared Exclusion Threshold 50mm (100MHz) 2b) Standalone SAR test exclusion for 1.5 GHz to 6 GHz at test separation distances ≥ 50mm [Threshold 50mm + (d separation - 50mm) × 10] where Threshold 1-g;10-g is 3 for 1-g; 7.5 for 10-g d seperation is the min. test separation distance; not less than 50mm f is the RF channel transmit frequency Threshold 50mm is Threshold 1-g;10-g × d / f 0.5 ; with d = 50mm The table below gives the calculated maximal power that could be used for source based time averaged conducted power, adjusted for tune up tolerance. If this is below the calculated value SAR testing is excluded. frequencyd separation Powerlimit [MHz][mm][mW][dBm][mW] 2450.00200395.831595.8312.9019.50yes Threshold 1-g Threshold 50mm P max-declared Exclusion Test report no.: 1-2776/21-01-10 © CTC advanced GmbH Page 4 of 4 Collocation: Overview: Technology , [MHz] NFC, 13.56 MHz BT LE, 2450 Exemption based on SAR , 200 mm distance SAR , 200mm distance Limit EIRP [mW]: 427.03 1595.83 Result EIRP [mW]: 180.0 19.5 Limit-Exhaustion [%] 42.2 1.2 Collocated percentage [%] Verdict: 43.4 PASS

Measurement Results 1-7959/19-01-07_log1_conducted Test logging This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Mihail Dorongovskij Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Table of Content IUT Summary3 1. Common2G4 Peak Output Power conducted 3MHz_3MHz ~ BT LE 1 Msps4 2. FCC Part 15.247 Maximum Peak Conducted Output Power DTS ~ BT LE 1 Msps8 3. FCC Part 15.247 Bandwidth 6dB DTS ~ BT LE 1 Msps15 4. FCC Part 15.247 Peak Power Spectral Density DTS ~ BT LE 1 Msps19 5. FCC Part 15.247 Bandwidth 99PCT-20dB ~ BT LE 1 Msps23 6. FCC Part 15.247 Restricted Band Edge Conducted Avg DC corrected DTS ~ BT LE 1 Msps30 7. FCC Part 15.247 TX Spurious Conduced ~ BT LE 1 Msps35 Document No. 1-7959/19-01-07_log1_conducted2/38 IUT Summary IUT DEFINITION ManufacturerSphinx Electronics GmbH &Co. KG TypeFT 200 / FT 200 CAP Serial No.NI Setup No.NI SW VersionNI HW VersionNI Comment 1NI Comment 2NI IUT Common Settings Tlow [°C]-20 Tmid [°C]20 Thigh [°C]55 Vlow [V]3.3 Vmid [V]3.8 Vhigh [V]4.2 Imax [A]1 Auto Control enabled Power Supply | Climatic BoxNo | No Antenna Gain [dBi]0 Additional Path Loss [dB]0.7 IUT Common Settings BT Low Energy Intermodulation Value N3 Image Freq. Low | Mid | High [MHz]0 | 0 | 0 Power Class2 1 Mbps supportedTrue | TXpayload 255 | RXpayload 255 2 Mbps supportedFalse | TXpayload 255 | RXpayload 255 Longrange S8 supportedFalse | TXpayload 255 | RXpayload 255 Longrange S2 supportedFalse | TXpayload 255 | RXpayload 255 Signaling Settings None | HCI | 1 | B24K | None | S1 | None | On Signaling RF Settings RF1com | 0 | 0 | On | User InteractionYes Switch Matrix & Pathcompensation enabledYes Document No. 1-7959/19-01-07_log1_conducted3/38 1. Common2G4 Peak Output Power conducted 3MHz_3MHz ~ BT LE 1 Msps Test References TC Start08.08.2019 15:39:17 System Version1.0.0.16 Test SpecificationNone Test Method Class / TC Version / TC IDTC_VM_Common2G4_Peak_Output_Power_Conducted_3MHz_3MHz_V01 Version: 0.0.1 | TCID_Common2G4_1 My DescriptionPeak Output Power conducted 3MHz/3MHz - BT LE 1 Msps Add. Information Test Parameter Technology to testBT LE 1 Msps Antenna Port used1 Temperaturemid Voltagemid Frequency low to testTrue | Freq [MHz] 2402 Frequency mid to testTrue | Freq [MHz] 2440 Frequency high to testTrue | Freq [MHz] 2480 PatternPRBS9 Switched PathIUT - SignalingUnit - SpectrumAnalyzer Devices in useSigBT: Rohde&Schwarz,CBT-1153.9000.35,100185,CBT 6X02.P02 | SA: Rohde&Schwarz,FSV-30,1321.3008K30/103170,3.40 Document No. 1-7959/19-01-07_log1_conducted4/38 Test at TX 2402 MHz READ SA SETTINGS: Ref. Level [dBm]7.71 Ref. Lev. offs [dB]10.51 Input Attenuation [dB]15 Freq. Start [MHz]2399.500 Freq. Stop [MHz]2404.500 Resolution BW. [MHz]3.000000 Video BW. [MHz]3.000000 DetectorPOS Sweep Time [ms]1000 Sweep Points/Section1001 Sweep Count10 Sweep ModeMAXH Used Sweep TypeSWE RESULT: TC_VM_Common2G4_Peak_Output_Power_Conducted_3MHz_3MHz_V01 Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power---30.00-2.5dBmInformation Peak Power---10000.562341mWInformation Frequency at Peak------2401.66MHzInformation Plot_Common2G4 Peak Output Power conducted 3MHz_3MHz ~ BT LE 1 Msps_08082019_153943.png Document No. 1-7959/19-01-07_log1_conducted5/38 Test at TX 2440 MHz READ SA SETTINGS: Ref. Level [dBm]6.44 Ref. Lev. offs [dB]10.6 Input Attenuation [dB]15 Freq. Start [MHz]2437.500 Freq. Stop [MHz]2442.500 Resolution BW. [MHz]3.000000 Video BW. [MHz]3.000000 DetectorPOS Sweep Time [ms]1000 Sweep Points/Section1001 Sweep Count10 Sweep ModeMAXH Used Sweep TypeSWE RESULT: TC_VM_Common2G4_Peak_Output_Power_Conducted_3MHz_3MHz_V01 Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power---30.00-3.74dBmInformation Peak Power---10000.422669mWInformation Frequency at Peak------2439.705MHzInformation Plot_Common2G4 Peak Output Power conducted 3MHz_3MHz ~ BT LE 1 Msps_08082019_154029.png Document No. 1-7959/19-01-07_log1_conducted6/38 Test at TX 2480 MHz READ SA SETTINGS: Ref. Level [dBm]6.61 Ref. Lev. offs [dB]10.65 Input Attenuation [dB]15 Freq. Start [MHz]2477.500 Freq. Stop [MHz]2482.500 Resolution BW. [MHz]3.000000 Video BW. [MHz]3.000000 DetectorPOS Sweep Time [ms]1000 Sweep Points/Section1001 Sweep Count10 Sweep ModeMAXH Used Sweep TypeSWE RESULT: TC_VM_Common2G4_Peak_Output_Power_Conducted_3MHz_3MHz_V01 Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power---30.00-3.43dBmInformation Peak Power---10000.453942mWInformation Frequency at Peak------2480.235MHzInformation Plot_Common2G4 Peak Output Power conducted 3MHz_3MHz ~ BT LE 1 Msps_08082019_154111.png TEST FINISHED General Verdict08.08.2019 15:41:11 / RT: 114 sPASS Document No. 1-7959/19-01-07_log1_conducted7/38 2. FCC Part 15.247 Maximum Peak Conducted Output Power DTS ~ BT LE 1 Msps Test References TC Start08.08.2019 15:41:15 System Version1.0.0.16 Test SpecificationFCC Part 15.247 Test MethodDTS: KDB 558074 D01 V05 - Chapter 8.3.1.1 RBW ≥ DTS Bandwidth Class / TC Version / TC IDTC_VM_FCC15247_Maximum_Peak_Conducted_Output_Power_DTS_V01 Version: 0.0.1 | TCID_FCC15247_3 My DescriptionFCC 15.247 Maximum Peak Output Power Conducted DTS - BT LE 1 Msps Add. Information Test Parameter Technology to testBT LE 1 Msps Antenna Port used1 Temperaturemid Voltagemid Frequency low to testTrue | Freq [MHz] 2402 Frequency mid to testTrue | Freq [MHz] 2440 Frequency high to testTrue | Freq [MHz] 2480 PatternPRBS9 Switched PathIUT - SignalingUnit - SpectrumAnalyzer Devices in useSigBT: Rohde&Schwarz,CBT-1153.9000.35,100185,CBT 6X02.P02 | SA: Rohde&Schwarz,FSV-30,1321.3008K30/103170,3.40 Document No. 1-7959/19-01-07_log1_conducted8/38 Test at TX 2402 MHz READ SA SETTINGS: Ref. Level [dBm]2.65 Ref. Lev. offs [dB]10.51 In…

Text truncated - open the document above for the full version.

BNetzA - CAB - 02/21 - 102 TEST REPORT Test report no.: 1-7959/19-01-07 Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Sphinx Electronics GmbH &Co. KG Tullastr. 3 79341 Kenzingen / GERMANY Phone: +49 7 64 49 22 80 Contact: Jan Römmelt e-mail: [email protected] Phone: +49 7644 / 9228-61 Manufacturer Sphinx Electronics GmbH &Co. KG Tullastr. 3 79341 Kenzingen / GERMANY Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices RSS - Gen Issue 5 Spectrum Management and Telecommunications Radio Standards Specification - General Requirements for Compliance of Radio Apparatus For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Furniture Locking System Model name: FT 200 / FT 200 CAP FCC ID: TCN021 IC: 5103A-021 Frequency: DTS band 2400 MHz to 2483.5 MHz Technology tested: Bluetooth ® LE Antenna: PCB trace antenna Power supply: 12.0 V DC by external power supply Temperature range: 0°C to +55°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Andreas Luckenbill Mihail Dorongovskij Lab Manager Lab Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-7959/19-01-07 © CTC advanced GmbH Page 2 of 47 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 2.3 Test laboratories sub-contracted ...................................................................................................... 3 3 Test standard/s, references and accreditations .......................................................................................... 4 4 Test environment ............................................................................................................................................ 5 5 Test item .......................................................................................................................................................... 5 5.1 General description ............................................................................................................................. 5 5.2 Additional information ........................................................................................................................ 5 6 Sequence of testing ....................................................................................................................................... 6 6.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ................................................................. 6 6.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ................................................................ 7 6.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ................................................................ 8 6.4 Sequence of testing radiated spurious above 18 GHz .................................................................... 9 7 Description of the test setup ....................................................................................................................... 10 7.1 Shielded semi anechoic chamber .................................................................................................... 11 7.2 Shielded fully anechoic chamber .................................................................................................... 12 7.3 Radiated measurements > 18 GHz ................................................................................................... 13 7.4 Conducted measurements Bluetooth system ................................................................................ 14 7.5 AC conducted .................................................................................................................................... 15 8 Measurement uncertainty ............................................................................................................................ 16 9 Summary of measurement results ............................................................................................................. 17 10 Additional comments ............................................................................................................................ 18 11 Measurement results ............................................................................................................................ 19 11.1 System gain .................................................................................................................................... 19 11.2 Power spectral density ........…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-2776/21-01-06-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Sphinx Electronics GmbH & Co. KG Tullastr. 3 79341 Kenzingen / GERMANY Phone: +49 7 64 49 22 80 Contact: Waldemar Dzierzenga e-mail: [email protected] Manufacturer Sphinx Electronics GmbH & Co. KG Tullastr. 3 79341 Kenzingen / GERMANY Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Wall Terminal Set (Reader + Controller) Model name: WT 400 (WRU 400 + WTC 200) / WT 410 (WRU 410 + WTC 200) FCC ID: TCN024 ISED certification number: 5103A-024 Frequency: 2400 MHz to 2483.5 MHz Technology tested: Bluetooth ® LE Antenna: Integrated antenna Power supply: 12 – 24 V DC by external power supply Temperature range: -25°C to +70°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Marco Bertolino Michael Dorongovski Lab Manager Lab Manager Radio Communications Radio Communications Test report no.: 1-2776/21-01-06-A © CTC advanced GmbH Page 2 of 33 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 3 2.1 Notes and disclaimer ............................................................................................................................ 3 2.2 Application details ................................................................................................................................ 3 2.3 Test laboratories sub-contracted ......................................................................................................... 3 3 Test standard/s, references and accreditations .............................................................................................. 4 4 Reporting statements of conformity – decision rule ...................................................................................... 5 5 Test environment ............................................................................................................................................. 6 6 Test item .......................................................................................................................................................... 6 6.1 General description ............................................................................................................................... 6 6.2 Additional information .......................................................................................................................... 6 7 Sequence of testing ......................................................................................................................................... 7 7.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ..................................................................... 7 7.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .................................................................... 8 7.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ..................................................................... 9 7.4 Sequence of testing radiated spurious above 18 GHz ....................................................................... 10 8 Description of the test setup.......................................................................................................................... 11 8.1 Shielded semi anechoic chamber ....................................................................................................... 12 8.2 Shielded fully anechoic chamber ........................................................................................................ 13 8.3 Radiated measurements > 18 GHz ...................................................................................................... 14 9 Measurement uncertainty .............................................................................................................................. 15 10 Summary of measurement results ......................................................................................................... 16 11 Additional comments .............................................................................................................................. 17 12 Measurement results .............................................................................................................................. 18 12.1 Band edge compliance radiated ...................................................................................................... 18 12.2 Spurious emissions radiated below 30 MHz ................................................................................... 20 12.3 Spurious emissions radiated 30 MHz to 1 GHz .........................................................................…

Text truncated - open the document above for the full version.

Annex D 1-2776/21-01-01_AnnexD Setup photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Tobias Wittenmeier Testing Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2022-07-20Document No. 1-2776/21-01-01_AnnexD2/7 Photo 3 Photo 4 2022-07-20Document No. 1-2776/21-01-01_AnnexD3/7 Photo 5 Photo 6 2022-07-20Document No. 1-2776/21-01-01_AnnexD4/7 Photo 7 Photo 8 2022-07-20Document No. 1-2776/21-01-01_AnnexD5/7 Photo 9 2022-07-20Document No. 1-2776/21-01-01_AnnexD6/7 Document history VersionApplied changesDate of release initial release2022-07-20 - END OF DOCUMENT - 2022-07-20Document No. 1-2776/21-01-01_AnnexD7/7