TG3-ARMH970Remote

waterless home fragrance diffuser INSTRUCTION MANUAL AND WARRANTY INFORMATION please take a moment now register your product at www.Homedics.com/register Your valuable input regarding this product will help us create the products you will want in the future. ARMH-970-CA | L-03893, Rev. 1 ITM. / ART. 1748527 2 READ AND SAVE THESE INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING IMPORTANT SAFETY INSTRUCTIONS • Use this product only for its intended use as described in this manual. • Always place diffuser on a firm, flat, level surface. • Always keep diffuser vertical when oil bottle has been installed to reduce likelihood of oil leaking and damaging the diffuser. • DO NOT use attachments not recommended by Homedics. • DO NOT use any other AC Adapter than what is supplied with the product. Use of any other AC adapter may damage the product and may increase the risk of harm to the user or property. Only AC Adapter bearing Part #: PP- ARMADP15 should be used. • DO NOT place or store this product where it can fall or be dropped into a tub or sink. • DO NOT place or drop into water or any other liquid. • Turn off product when not in use. • NEVER operate this product if it has a damaged cord, plug, cable, or housing. • If the cord or product sustains damage, you must stop using this product immediately and contact Homedics Consumer Relations (see warranty information online for contact information). • DO NOT attempt to modify or repair the unit. Servicing must be performed by professional or qualified personnel. • Keep away from heated surfaces. • Always keep the product away from high temperatures and fire. • Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents. • NEVER cover the product when it is in operation. • This unit should not be used by children without adult supervision. • Keep this product out of the reach of children. • Please dispose of battery in accordance with local, state, province, and country regulations. • DO NOT use outdoors. • This product is intended for indoor, household use only WARNING: Chemical burn hazard. Keep batteries away from children. WARNING: This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 3 123 456 789 1hr2hr4hr 8hr HOW TO USE 1. Take out the diffuser head. 2. Twist off the bottle. 3. Twist on 120 ml SereneScents™ oil bottle. 4. Put the diffuser head back in the machine. 1 hr 2 hr 4 hr 8 hr Control Panel (on diffuser base)Remote Control Decrease intensity Intensity level buttons Timer buttons Power Increase intensity Power Timer Intensity level display 124 3 5 4 Power ON Plug in adapter to wall and diffuser. The diffuser will beep to indicate that the diffuser is plugged in and ON. If plugged in already, press the button located on the diffuser base or remote. Power OFF Press to turn off the diffuser. Intensity Setting The diffuser has 9 scent levels. On the diffuser base, press to increase the intensity, press to decrease the intensity. On the remote press your preferred (1-9) level to start. Remote Control Remove pull tab from remote control before using. Timer Press timer button on diffuser to cycle through the timer options: 1, 2, 4, or 8 hours and off. On the remote, the user can select the desired timer duration or turn the timer off by pressing the corresponding button. HOW TO OPERATE EQUIPMENT CLEANING The diffuser may need to be cleaned when: 1. You’re about to change to another SereneScents™ 120 ml oil bottle. 2. The atomization volume becomes weak. Cleaning steps: 1. Fill a clean bottle with 90% isopropyl alcohol or higher. 2. Install this bottle to the diffuser and turn the diffuser on level 9. Let it work for 10 minutes. 3. Turn OFF diffuser, remove bottle with isopropyl alcohol and replace with bottle of fragrance oil. 5 BATTERY REPLACEMENT INSTRUCTIONS: BATTERY PRECAUTIONS: • Use only the size and type of batteries specified. • Clean the battery contacts and the contacts of the device with a dry cloth prior to installing the batteries. • Ensure the battery is installed correctly with regard to polarity (+ /–). • Remove battery from the device when the device is not used for an extended period. • Keep batteries away from children. • Remove depleted batteries from the unit promptly. Dispose of used batteries safely. • Recycle or dispose of batteries properly in accordance with all local, state, province, and country regulations. Do not open batteries or dispose of in fire. WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN • Swallowing may lead to serious injury, in as little as 2 hours, or death due to chemical burns and potential perforation of the esophagus. • If you suspect your child has swallowed or inserted a button battery, immediately seek urgent medical assistance. • Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. DO NOT use if compartment is not secure. • Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous. • Tell others about the risk associated with button batteries. 1. Remove battery holder and battery from remote 2. Remove battery from battery holder 3. Install new CR2025 battery into the battery holder following the polarity as shown. 4. Insert battery holder and new battery into the remote 6 TROUBLESHOOTING Before asking to have the machine repaired, please try to diagnose the problem following the below instructions. BreakdownSolution Not diffusing • Make sure the power is ON or…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name FKA Distributing Co., LLC Address 3000 N. Pontiac Trail , Commerce Township, Michigan, United States, 48390 Grantee Code TG3 FCC ID TG3-ARMH970 Authorized Contact Name Mark Straight Contact Email [email protected] Contact Phone 2488633000 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List FKA Distributing Co., LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. {$applicant_company_FCC} (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023/6/20 Print Name: Mark Straight Title: Senior Project Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023/6/20 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: FKA Distributing Co., LLC Company Name: FKA Distributing Co., LLC Grantee Code: TG3 FRN: 0013791793 Contact Name: Mark Straight Contact Name: Mark Straight Address: 3000 N. Pontiac Trail Address: 3000 N. Pontiac Trail City/Province/Zip: Commerce Township, Michigan, 48390 City/Province/Zip: Commerce Township, Michigan, 48390 Telephone: 2488633000 Telephone: 2488633000 Fax: 2488633000 Fax: 2488633000 Email: mark.straight@f kabrands.com Email: mark.straight@f kabrands.com Applicable Equipment: FCC ID: TG3-ARMH970 ATTN: Director of Certif ication: We, FKA Distributing Co., LLC and FKA Distributing Co., LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States f or matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, {$applicant_company_FCC} and FKA Distributing Co., LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent f or service of process in the United States f or no less than one year af ter either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name: Mark Straight Name: Mark Straight Title: Senior Project Engineer Title: Senior Project Engineer

FKA Distributing Co., LLC Authority letter FCC Date: 2023/6/20 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: TG3-ARMH970 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application f or equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same ef f ect as acts of our own. We, the undersigned, hereby certif y that we are not subject to a denial of f ederal benef its, that includes FCC benef its, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application f or certif ication on our behalf , I acknowledge that all responsibility f or complying with the terms and conditions f or Certif ication, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until f urther written notice f rom the applicant. Name (Printed): Mark Straight Title: Senior Project Engineer : On behalf of Company: FKA Distributing Co., LLC

FKA Distributing Co., LLC Conf idential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: FKA Distributing Co., LLC 3000 N. Pontiac Trail Commerce Township, Michigan, 48390, United States Regarding: Conf identiality Request regarding application f or FCC ID: TG3-ARMH970 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request conf idential treatment of the documents listed below, associated with the certif ication application ref erenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary inf ormation not released to the public. Public disclosure of this inf ormation may prove harmf ul to the business of the applicant. Sincerely, Name (Printed): Mark Straight Title: Senior Project Engineer On behalf of Company: FKA Distributing Co., LLC

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2305000429HS Test Model No.: PP-ARMH970RMT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4

33.5mm 15.2mm WARNING CHEMICAL BURN HAZARD. KEEP BATTERIES OUT OF REACH OF CHILDREN SEE MANUAL FCC ID: TG3-ARMH970 IC: 20834-ARMH970 Remote PP-ARMH970RMT

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 2 Appendix Internal Photos for GZCR2305000429HS Test Model No.: PP-ARMH970RMT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 2 EUT Constructional Details (EUT Photos) RF transmitter ANT

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230500042903 FCC ID: TG3-ARMH970 Page: 1 of 11 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2305000429HS Applicant:FKA Distributing Co., LLC Address of Applicant:3000 N. Pontiac Trail, Commerce Township, Michigan, 48390, United States Manufacturer:Guangzhou Chiyang Scent Technology Co., LTD. Address of Manufacturer:4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun Town, Panyu Guangzhou, Guangdong, 511495 China Factory:Guangzhou Chiyang Scent Technology Co., LTD. Address of Factory:4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun Town, Panyu Guangzhou, Guangdong, 511495 China Equipment Under Test (EUT): EUT Name:Remote Model No.: PP-ARMH970RMT Trade Mark:Homedics Standard(s) : 47 CFR Part 2.1093 Date of Receipt: 2023-05-09 Date of Evaluation: 2023-05-26 Date of Issue: 2023-07-12 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230500042903 Page: 2 of 11 Revision Record VersionReport No.DateRemark 01GZCR2305000429032023-07-12Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230500042903 Page: 3 of 11 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure 47 CFR Part 2.1093 47 CFR Part 2.109347 CFR Part 2.1093Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230500042903 Page: 4 of 11 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................5 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1RF Exposure Evaluation....................................................................................................................7 5.1.1Limit & Test Method......................................................................................................................7 5.1.2Conclusion..................................................................................................................................10 6EUT Constructional Details (EUT Photos)...........................................................................................11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230500042903 Page: 5 of 11 4General Information 4.1Details of E.U.T. Power supply:DC 3 V (1*CR2050) Operation Frequency433.92 MHz Channel Numbers:1 Modulation Type:ASK Antenna Type:PCB antenna 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ● ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Innovation Science and Economic Development Canada for Wireless Device Testing laboratories to test to Canadian radio equipment requirements. Registration No. 4620B, CAB identifier: CN0052. ● VCCI (Registration No.: R-12460, C-12584, G-20107 and T-11179) The 10m Semi-anechoic chamber, 966 Anechoic Chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures w…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230500042902 FCC ID: TG3-ARMH970 Page: 1 of 31 Ricky Liu Manager TEST REPORT Application No.: GZCR2305000429HS Applicant:FKA Distributing Co., LLC Address of Applicant:3000 N. Pontiac Trail, Commerce Township, Michigan, 48390, United States Manufacturer:Guangzhou Chiyang Scent Technology Co., LTD. Address of Manufacturer:4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun Town, Panyu Guangzhou, Guangdong, 511495 China Factory:Guangzhou Chiyang Scent Technology Co., LTD. Address of Factory:4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun Town, Panyu Guangzhou, Guangdong, 511495 China Equipment Under Test (EUT): EUT Name:Remote Model No.: PP-ARMH970RMT Trade Mark:Homedics Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2023-05-09 Date of Test: 2023-05-23 to 2023-05-26 Date of Issue: 2023-07-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230500042902 Page: 2 of 31 Revision Record VersionReport No.DateRemark 01GZCR2305000429022023-07-12Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230500042902 Page: 3 of 31 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult 20dB Bandwidth ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.231(c) Pass Radiated Emissions below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Dwell Time (15.231(a)) ANSI C63.10 (2013) Section 7.5 47 CFR Part 15, Subpart C 15.231(a) Pass Field Strength of the Fundamental Signal (15.231(b)) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions above 1GHz 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.6 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230500042902 Page: 4 of 31 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................6 4.4Test Location.....................................................................................................................................6 4.5Test Facility.......................................................................................................................................7 4.6Deviation from Standards..................................................................................................................7 4.7Abnormalities from Standard Conditions...........................................................................................7 5Equipment List.........................................................................................................................................8 6Radio Spectrum Technical Requirement.............................................................................................10 6.1Antenna Requirement......................................................................................................................10 6.1.1Test Requirement:.......................................................................................................................10 6.1.2Conclusion..................................................................................................................................10 7Radio Spectrum Matter Test Results...................................................................................................11 7.120dB Bandwidth..............................................................................................................................11 7.1.1E.U.T. Operation.........................................................................................................................11 7.1.2Test Mode Description................................................................................................................11 7.1.3Test Setup Diagram....................................................................................................................11 7.1.4Measurement Procedure and Data............................................................................................12 7.2Radiated Emissions below 1GHz....................................................................................................13 7.2.1E.U.T. Operation....................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 2 Appendix Test Setup Photo for GZCR230500042902 Test Model No.: PP-ARMH970RMT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 2 Test Setup Photo Radiated Emissions below 1GHz & Field Strength of the Fundamental Signal (15.231(b)) Radiated Emissions above 1GHz