TG3-ST150PERM MAGNET SAND SCULPT DEVICE

1.PERM MAGNET SAND SCULPT DEVICE 2.Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name FKA Distributing Co., LLC Address 3000 N. Pontiac Trail , Commerce Township, Michigan, 48390, United States FRN 0013791793 Grantee Code TG3 FCC ID TG3-ST150 Authorized Contact Name Mark Straight Contact Email [email protected] Contact Phone (248) 863-3014 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List FKA Distributing Co., LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. FKA Distributing Co., LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Date: 2024/6/13 Print Name: Mark Straight Title: ENGINEERING MANAGER *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2024/6/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: FKA Distributing Co., LLC Company Name: FKA Distributing Co., LLC FRN: 0013791793 FRN: 0013791793 Grantee Code: TG3 Contact Name: Mark Straight Contact Name Mark Straight Address: 3000 N. Pontiac Trail Address: 3000 N. Pontiac Trail City/Province/Zip: Commerce Township, Michigan, 48390 City/Province/Zip: Commerce Township, Michigan, 48390 Telephone: (248) 863-3014 Telephone: (248) 863-3014 Fax: (248) 863-3146 Fax: (248) 863-3146 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: TG3-ST150 ATTN: Director of Certification: We, FKA Distributing Co., LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, FKA Distributing Co., LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Mark Straight Name (Printed): Mark Straight Title: ENGINEERING MANAGER Title: ENGINEERING MANAGER Signature: Signature:

FKA Distributing Co., LLC Authority letter FCC Date: 2024/6/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: TG3-ST150 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Mark Straight Title: ENGINEERING MANAGER Signature: On behalf of Company: FKA Distributing Co., LLC

FKA Distributing Co., LLC Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: FKA Distributing Co., LLC 3000 N. Pontiac Trail Commerce Township, Michigan, 48390, United States Regarding: Confidentiality Request regarding application for FCC ID: TG3-ST150 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Mark Straight Title: ENGINEERING MANAGER Signature: On behalf of Company: FKA Distributing Co., LLC

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 6 Appendix External Photos for GZCR2405000482AT Test Model No.: ST-150 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 6 of 6 - End of the Appendix -

颜色对照表：1 技术要求： 1.文字清晰正确，材质50番消银龙 2.印刷墨迹不允许出现掉墨、印刷重影、模糊现象 3.未标注公差±2mm 后盖标 Black FCC ID:TG3-ST150 IC:20834-ST150 Model: ST-150 Rated Voltage:12V Rated Current: 3A Made in China R70mm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 8 Appendix Internal Photos for GZCR2405000482AT Test Model No.: ST-150 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 8 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 8 ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 8 of 8 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR240500048203 Page: 1 of 9 FCC ID: TG3-ST150 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2405000482AT Applicant:FKA Distributing Co., LLC Address of Applicant:3000 N. Pontiac Trail, Commer Township, Michigan, 48390, United States Manufacturer:FKA Distributing Co., LLC Address of Manufacturer:3000 N. Pontiac Trail, Commer Township, Michigan, 48390, United States Factory:Electrical Appliance Branch of Zhangzhou Easepal Industrial Corporation Address of Factory:No.36 Longkun Road, Hongjian Village, Jiaomei Town, Zhangzhou Taiwanese Investment Zone, Fujian Product Name:PERM MAGNET SAND SCULPT DEVICE Model No.: ST-150, ST-150-CE, ST-150-BK, ST-150XXXXXX (Where X can be any letter A-Z or number 0-9)   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:Homedics Standard(s) : KDB447498D01 General RF Exposure Guidance v06 47 CFR Part 1.1310 Date of Receipt: 2024-05-14 Date of Evaluation: 2024-05-29 Date of Issue: 2024-07-08 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR240500048203 Page: 2 of 9 Revision Record VersionReport No.DateRemark 01GZCR2405000482032024-07-08Original Authorized for issue by: Pank Feng/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR240500048203 Page: 3 of 9 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 47 CFR Part 1.1310Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: ST-150, ST-150-CE, ST-150-BK, ST-150XXXXXX (Where X can be any letter A-Z or number 0-9) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance color and model number. There are two options of AC/DC adapter for the EUT referred to section 4.1 with difference on the type of AC plug and model number. Therefore, only one model ST-150 with AC/DC adapter HP36A-1203000-AU PP-ST150BKADP was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR240500048203 Page: 4 of 9 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1General Description of Applied Standards........................................................................................7 5.2RF Exposure Evaluation....................................................................................................................7 5.2.1Limit & Test Method......................................................................................................................7 5.2.2Conclusion....................................................................................................................................8 6EUT Constructional Details (EUT Photos).............................................................................................9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR240500048203 Page: 5 of 9 4General Information 4.1Details of E.U.T. Power supply:DC 12 V powered by AC/DC adapter as below: Option 1: Model: HP36A-1203000-AU PP-ST150BKADP Option 2: Model: HP36A-1203000-AU PP-ST150CEADP Input: AC 100-240V 50/60Hz Output: DC 12V 3A Cable(s):DC cable:1.8m unshielded Operation Frequency:2402MHz to 2480MHz Modulation Type:GFSK Number of Channels:40 Channel Spacing:2MHz Antenna Type:PCB Antenna Antenna Gain:-2.37 dBi according to antenna specification Antenna Number:1 Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, No.198, Kezhu Road, Science City, Economic & Technological Development Area, Guangzhou, Guangdong, China 510663 Tel: +86 20 82155555 No tes…

Text truncated - open the document above for the full version.

ShenzhenHi-LinkElectronicCo.,Ltd PCBANTDatasheet ITEMANTSPEC ModelName2.4GANT Center Frequency HorizontalVertical 240024502500240024502500 -3.47-2.89-4.58-2.66-3.46-3.25 MAX.Gain-2.37dB PolarizationHorizontalandVertical AzimuthBeam Pattern Omni-directional Impedance50Ohm Antenna Length 48.30mm ManufacturerShenzhenHi-LinkElectronicCo.,Ltd Add 17F，BuildingE,XingheWORLD,MinzhiStreet,LongHuadistrict,Shenzhen 518131 AntennaPhoto&Length(mm)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240500048202 Page: 1 of 59 FCC ID: TG3-ST150 Ricky Liu Manager TEST REPORT Application No.: GZCR2405000482AT Applicant:FKA Distributing Co., LLC Address of Applicant:3000 N. Pontiac Trail, Commer Township, Michigan, 48390, United States Manufacturer:FKA Distributing Co., LLC Address of Manufacturer:3000 N. Pontiac Trail, Commer Township, Michigan, 48390, United States Factory:Electrical Appliance Branch of Zhangzhou Easepal Industrial Corporation Address of Factory:No.36 Longkun Road, Hongjian Village, Jiaomei Town, Zhangzhou Taiwanese Investment Zone, Fujian Product Name:PERM MAGNET SAND SCULPT DEVICE Model No.: ST-150, ST-150-CE, ST-150-BK, ST-150XXXXXX (Where X can be any letter A-Z or number 0-9)   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:Homedics Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-05-14 Date of Test: 2024-05-21 to 2024-05-29 Date of Issue: 2024-07-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240500048202 Page: 2 of 59 Revision Record VersionReport No.DateRemark 01GZCR2405000482022024-07-08Original Authorized for issue by: Pank Feng/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240500048202 Page: 3 of 59 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult Conducted Emissions at AC Power Line (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240500048202 Page: 4 of 59  Declaration of EUT Family Grouping: Model No.: ST-150, ST-150-CE, ST-150-BK, ST-150XXXXXX (Where X can be any letter A-Z or number 0-9) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance color and model number. There are two options of AC/DC adapter for the EUT referred to section 4.1 with difference on the type of AC plug and model number. Therefore, only one model ST-150 with AC/DC adapter HP36A-1203000-AU PP-ST150BKADP was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240500048202 Page: 5 of 59 3Contents Page 1Cover Page.................................................................................................................................................1 2Test Summary............................................................................................................................................3 3Contents.....................................................................................................................................................5 4General Information...................................................................................................................................7 4.1Details of E.U.T. ..................................................................................................................................7 4.2Description of Support Units................................................................................................................7 4.3Measurement Uncertainty...................................................................................................................8 4.4Test Location.......................................................................................................................................8 4.5Test Facility.........................................................................................................................................9 4.6Deviation from Standards....................................................................................................................9 4.7Abnormalities from Standard Conditions.............................................................................................9 5Equipment List.........................................................................................................................................10 6Radio Spectrum Technical Requirement...............................................................................................13 6.1Antenna Requirement............................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 5 Appendix Test Setup Photo for GZCR240500048202 Test Model No.: ST-150 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 5 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 5 Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 5 Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 5 of 5 - End of the Appendix -