TOAJL1710BLCD Monitor

=[MZ 5IV]IT JL1710B LCD Monitor FCC COMPLIANCE STATEMENT NOTE: FCC Compliance Statement ......................................... i Monitor Features ......................................................... 2 General Information .................................................... 2 Safety Instructions ....................................................... 3 Equipment Check list ................................................... 5 INTRODUCTION Power Management .................................................. 12 Timing Guide............................................................... 13 Pin Assignment .......................................................... 14 Troubleshooting .......................................................... 15 Specifications ............................................................ 16 REFERENCE Installation....................................................................... 6 Control Buttons............................................................... 7 On-Screen Display ......................................................... 8 GETTING STARTED Menu Descriptions ....................................................... 9 ON-SCREEN CONTROLS TABLE OF CONTENTS 01 TABLE OF CONTENTS 02 MONITOR FEATURES MONITOR FEATURES Supports Analog IBM compatible PC, Apple Macintosh TM (Adapter optional). Supports DPMS for monitor power management. Supports DDC2B. On Screen Control: Contrast, Brightness, Color Temp, H-Position, V-Position Phase, Clock, Auto Adjust, Auto Color, OSD H-Pos, OSD V-Pos, OSD Timer, Language, Signal Source, Mode, Stand Light Timer. Built-in color active matrix TFT (Thin Film Transistor) Liquid Crystal Display (LCD) that uses amorphous silicon TFTs as a switching device. Resolution: up to 1280 X 1024. Color: 16.2M Color support. Pixel pitch: 0.264 mm (H) X 0.264 mm (W) Scanning frequency: 30 KHz ~ 80 KHz (H), 55 Hz ~ 75 Hz (V). Universal power supply: AC 100-240V allowed. Power consumption Normal: 40 Watt Max. Off: 3 Watt Max. Outside dimension: 387 mm (W) X 394 mm (H) X 201.8 mm (D). Front View Rear View Side View General Information Your new LCD monitor incorporates the latest state-of the art color Liquid Crystal Display (LCD) technology providing a wider viewing angle with higher contrast ratio. Your new LCD monitor has many advantages: safe from electromagnetic wave, lights, sharps and slims. This makes the monitor extremely suitable in the environ ment of administration, transportation system research, etc. Your new LCD monitor is designed for Analog, Digital inputs. Your new LCD monitor does not emit any X-ray radiation and the magnetic emission greatly reduces the eyestrain. Moreover, our On Screen Controls on the front of the panel provide flexibility with simple controls. You can use these controls to adjust the display as you desire. Your new LCD monitor incorporates an active TFT module. It has a 1280 X 1024 pixel resolution, high contrast, wide viewing angle and colors up to 16.2M. SAFETY INSTRUCTIONS 03 SAFETY INSTRUCTIONS Caution TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. Do not open any covers on the monitor. No user serviceable parts are inside. In an emergency, disconnect the AC power plug. To avoid electrical shock, disconnect the power cord from the monitor before connecting the signal cable to the computer. Keep away from liquids and flame. Do not immerse this monitor in water or any other liquid. Do not use this device in excessively hot conditions. Handle the power cord with care. Do not bend the power cord excessively or place heavy objects on it. Do not use a damaged power cord, doing so can result in fire or electrical shock hazards. When disconnecting the power cord, always grasp the plug, not the cord. The liquid crystals in the display panel contain several irritants. If the panel is damaged or broken, do not allow the liquid to come in contact with skin, eyes, or mouth. If you come in contact with the liquid, flush the affected area with running water for at least 15 minutes, then consult a doctor. Handle this monitor with care when moving it. When lifting the monitor, support it with one hand holding the stand, and one hand holding the LCD screen. Always disconnect the power cord when moving this monitor. Do not lay this monitor in a horizontal position when operating. 1 2 3 4 5 6 7 8 9 SAFETY INSTRUCTIONS 04 SAFETY INSTRUCTIONS Handling Due to its fragile glass panel, this monitor must be handled with caution and not be exposed to impact or shock. Never touch the display area or rub it with a hard object or tool, as the panel is easily scratched. Cleaning The display area is sensitive to scratching. Do not use ketone-type cleaners (i.e. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride to clean the panel. Doing so may result in permanent damage. Water, IPA (Iso Prophyl Alcohol) and Hexane are safe cleaners. Do not allow oil or water to penetrate the display, this will cause staining and discoloration. Avoid getting food particles and fingerprints on the display area at all times. Storage Store the monitor in a dark place away from sunlight and ultraviolet (UV) radiation, this may cause air bubbles to develop within the glass panel. Do not store the display in temperatures higher than 104°F/40°C or humidity greater than 90%. Avoid condensation. 05 EQUIPMENT CHECK LIST EQUIPMENT CHECK LIST Before operating your display, please check to make sure that all of the Items listed are present in your package: The monitor and items may not match the following illustrations exactly. ❖ Power Requirements The monitor is equipped with an auto-sensing power supply for voltage ranging from 100-120VAC/200-240VAC, 50/60Hz. Confirm the power rating of the AC Source before you plug the AC cable to the wall outlet. AC to DC AdapterPower CordUser Manual Monitor Sig…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A LTM170EU -L21 ODD 8 CHIP CON TROL CONNECTOR 12VONLY D-SUB RGB IN ANALOG INPUT PART LCD OUTPUT POWER CC&F MCU PART OSD NST_JL1710B_REV0 DIGITAL PART INVERTER AUDIO SXGA 17" MP MCUW78E65P EVEN8 24C21 SCALER :RTD2523B LVDS 30P DRAWING DATE : 2005, 08,11 SCL/SDA LVDS 20P VGA LVDS (LG, ) 삼성 LVDS ( ) 삼성 SINGLE P OWER LTM170EX -L01 24C02 DVI DDC 24C02 DDC DVI DIGITAL INPUT PART TDA7496L AUDIO OUTPUT MAIN CLOCK24.000MHz MAIN CLOCK: 24.000MHz TYPE: SMD, C0:18pF <Doc> <RevCode> <Title> B 11 Wednesday, October 12, 2005 TitleSize Document Number Rev Date: Sheet of

Appendix C. External Photographs E05.1010.FCC.615N / Page C1 of C1 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Front View of EUT Rear View of EUT

Appendix A. FCC ID Label and Location E05.1010.FCC.615N / Page A1 of A2 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel: 82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Product label sample with FCC label information Following is a sample copy of the label that will be placed on the rear cabinet of the product. The FCC ID label and compliance statement are marked in the product label. IBRIDGE CO., LTD. 17” LCD MONITOR FCC ID : TOAJL1710B Model No. : JL1710B POWER : Adapter Input – AC 100-240 V, 50-60 Hz Output – DC 12 V, 3.33 A Serial No : N/A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Manufacturer: IBRIDGE CO., LTD. Made in Korea Appendix A. FCC ID Label and Location E05.1010.FCC.615N / Page A2 of A2 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel: 82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) Label here

Appendix D. Internal Photographs E05.1010.FCC.615N / Page D1 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 View of Inside Appendix D. Internal Photographs E05.1010.FCC.615N / Page D2 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Component side view of Main board Appendix D. Internal Photographs E05.1010.FCC.615N / Page D3 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Solder side view of Main board Appendix D. Internal Photographs E05.1010.FCC.615N / Page D4 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Component side view of inverter board Appendix D. Internal Photographs E05.1010.FCC.615N / Page D5 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Solder side view of inverter board Appendix D. Internal Photographs E05.1010.FCC.615N / Page D6 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Component side view of OSD board Solder side view of OSD board Appendix D. Internal Photographs E05.1010.FCC.615N / Page D7 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 View of LCD panel View of LCD panel label Appendix D. Internal Photographs E05.1010.FCC.615N / Page D8 of D8 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 View of AC/DC Adapter label Inside view of Stand

FCC TEST REPORT E05.1010.FCC.615N / Page 5 of 15 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab : #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 2. PRODUCT INFORMATION 2.1 General Remark 2.2 Equipment Description The Equipment Under Test (EUT) is the IBRIDGE CO., LTD., 17” LCD MONITOR, JL1710B 2.3 General Specification Chassis Type Plastic List of Each OSC. Or X-Tal. Freq. (>=1MHz) X-Tal 24 MHz Size 17” Diagonal Display Size 337.92 mm (H) x 270.336 mm(V) Type TFT active matrix LCD Panel Pixel Pitch 0.264 x 0.264 mm Left / Right 75/ 75 Viewing Angles Up / Down 75/ 60 Horizontal Sync 30 ~ 80 kHz Vertical Sync 55 ~ 75 Hz Display Color 16.2 M colors Frequency Surface Treatment Anti-glare coating Contrast Ratio Typ. 700:1 Luminance of White Typ. 300 cd/ Compatibility PC IBM XT, AT, 386, 486, Pentium or PS/2 and compatibles (from VGA and DVI up to 1280X1024@75 Hz) Display Resolution Max 1280X1024@75 Hz (60 Hz for optimal display Input Signal 15-pin D-SUB, 24-pin DVI Connectors Power Jack Type DC +12V In Input AC 100~240V, 50~60 Hz Output DC 12V Power Consumption 40 watts (Maximum) Temperature 32F to 104F (-25 to 40 ) Humidity 20 % RH to 80 % RH (no condensation) Operating Altitude To 10,000 feet Temperature -13F to 104F (0 to 40 ) Storage Conditions Humidity 5 % RH to 90 % RH (no condensation) Dimension 387 mm (W) X 394 mm (H) X 201.8 mm (D) Weight Net 5.0 kg (11 lbs)

www.etl.re.kr E-RAE Testing Laboratory This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the ETL,Inc. Electromagnetic Emission FCC MEASUREMENT REPORT CERTIFICATION OF COMPLIANCE FCC Part 15 Certification Measurement This 17” LCD MONITOR, Model JL1710B has been tested in accordance with the measurement procedures specified in ANSI C63.4-2001 at the ETL/EMC Test Laboratory and has been shown to be complied with the electromagnetic radiated emission limits specified in FCC Rule Part 15 Subpart B: I attest to the accuracy of data. All measurement herein was performed by me or was made under my supervision and is correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Cheon Sik, Kim / Chief Engineer ETL Inc. #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea PRODUCT : 17” LCD MONITOR MODEL/TYPE NO : JL1710B FCC ID : TOAJL1710B APPLICANT : IBRIDGE CO., LTD. #15-15, Yeouido-Dong, Youngdeungpo-Gu, 150-872, Seoul, Korea Attn.: Jae Hyun, Joo / Director FCC CLASSIFICATION : Class B personal computers and peripherals FCC RULE PART(S) : FCC Part 15 Subpart B FCC PROCEDURE : Certification TRADE NAME : CYFiX TEST REPORT No. : E05.1010.FCC.615N DATES OF TEST : September 28 – October 07, 2005 DATES OF ISSUE : Octiber 07, 2005 TEST LABORATORY : ETL Inc. ( FCC Registration Number : 95422) #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea Tel : (031) 885-0072 Fax : (031) 885-0074 FCC TEST REPORT E05.1010.FCC.615N / Page 2 of 15 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab : #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Table of Contents FCC Measurement Report 1. Introduction 2. Product Information 3. Description of Tests 4. Test Condition 5. Test Results 5.1 Summary of Test Results 5.2 Conducted Emissions Measurement 5.3 Radiated Emissions Measurement 6. Sample Calculation 7. List of test Equipment for Measurement Appendix A. FCC ID Label and Location Appendix B. Test Setup Photographs Appendix C. External Photographs Appendix D. Internal Photographs Appendix E. Block Diagram Appendix F. User Manual FCC TEST REPORT E05.1010.FCC.615N / Page 3 of 15 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab : #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Scope – Measurement and determination of electromagnetic emission(EME) of radio frequency devices including intentional radiators and/or unintentional radiators for compliance with the technical rules and regulations of the U.S Federal Communications Commission(FCC) General Information z EUT Type : 17” LCD MONITOR z Model Number : JL1710B z FCC ID : TOAJL1710B z S/N : N/A z FCC Rule Part(s) : FCC Part 15 Subpart B z Test Procedure : ANSI C63.4-2001 z FCC Classification : Class B personal computers and peripherals z Dates of Tests : September 28 – October 07, 2005 z Place of Tests : ETL Inc. EMC Testing Lab (FCC Registration Number : 95422) 584, Sangwhal-Ri, Kanam-Myun, Yoju-Kun, Kyounggi-Do, Korea Tel : (031) 885-0072 Fax : (031) 885-0074 z Test Report No. : E05.1010.FCC.615N Applicant Name : IBRIDGE CO., LTD. Address : #15-15, Yeouido-Dong, Youngdeungpo-Gu, Seoul, 150-872, Korea Attention : Jae Hyun, Joo / Director FCC TEST REPORT E05.1010.FCC.615N / Page 4 of 15 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab : #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 1. INTRODUCTION The measurement for radiated and conducted emission test were conducted at the open area test site of E-RAE Testing Laboratory Inc. facility located at 584, Sangwhal-ri, Ganam-myun, Youju-kun, Kyoungki-do, Korea. The open area test site is constructed in conformance with the requirements of the ANSI C63.4-2001 and CISPR Publication 16. The ETL has site descriptions on file with the FCC for 3 and 10 meter site configurations. Detailed description of test facility was found to be in compliance with the requirements of Section 2.948 FCC Rules according to the ANSI C63.4-2001 and registered to the Federal Communications Commission(Registration Number : 95422 ). The measurement procedure described in American national standard for method of measurement of radio-noise emission from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz (ANSI C.63.4-2001) was used in determining radiated and conducted emissions from the IBRIDGE CO., LTD. Model: JL1710B FCC TEST REPORT E05.1010.FCC.615N / Page 5 of 15 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab : #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 2. PRODUCT INFORMATION 2.1 General Remark 2.2 Equipment Description The Equipment Under Test (EUT) is the IBRIDGE CO., LTD., 17” LCD MONITOR, JL1710B 2.3 General Specification Chassis Type Plastic List of Each OSC. Or X-Tal. Freq. (>=1MHz) X-Tal 24 MHz Size 17” Diagonal Display Size 337.92 mm (H) x 270.336 mm(V) Type TFT active matrix LCD Panel Pixel Pitch 0.264 x 0.264 mm Left / Right 75/ 75 Viewing Angles Up / Down 75/ 60 Horizontal Sync 30 ~ 80 kHz Vertical Sync 55 ~ 75 Hz Display Color 16.2 M colors Frequ…

Text truncated - open the document above for the full version.

Appendix B. Test Setup Photographs E05.1010.FCC.615N / Page B1 of B2 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Conducted Emission Test Setup Appendix B. Test Setup Photographs E05.1010.FCC.615N / Page B2 of B2 Head Office: # 371-51 Kasan-Dong, Keumcheon-ku, Seoul, 153-803, Korea / Tel : 82-2-858-0786, Fax : 82-2-858-0788 EMC Lab: #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea /Tel:82-31-885-0072, Fax:82-31-885-0074 Form NO: ETL(E)004A4001201-0 Radiated Emission Test Setup