TQB-PREDATIONRemote Control

User's Manual – Predation Remote Control This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. (3) This device can automatically deactivate the transmitter within not more than 5 seconds of being released. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The Device Data: 1. Model designation: Predation 2. Power: 3V battery 3. Frequency: 433 MHz Operation instruction: Step: 1. Switch on the call unit by pressing ON/OFF button. 2. Put the call unit away from the remote control unit up to 250 feet 3 Push the PLAY button on the remote control unit. The LED on the remote control will light indicating that the remote control is working when a button is pushed. The remote control will not work if two or more buttons are pushed at the same time. 4 The call unit will sound when the PLAY button on the remote control is pushed. Once the button is released the sound will not stop until the sound cycle ends. 5 The volume of the control unit is controlled by the “VOL UP” and “VOL DOWN” buttons on the remote control unit. The LED light will light to show that the remote control unit is working when a button is pushed. 6 Press the PAUSE button to pause the sound. Pressing the PAUSE button again will cause the sound to continue. The LED light will light to show that the remote control unit is working when a button is pushed. 7 Press the NEXT button to step up to the next recorded sound. Press the PREVIOUS button to step down to the next recorded sound. The LED light will light to show that the remote control unit is working when a button is pushed. 8 Press DECOY button to power on/off accessory decoy items. The LED light will light to show that the remote control unit is working when a button is pushed. 9 Press REPEAT button to continuously play a selected sound. Pressing the REPEAT button a second time will turn off the continuous play feature. The LED light will light to show that the remote control unit is working when a button is pushed. 10 When finished using the remote control unit, do not forget to turn the call unit off by pressing the ON/OFF button. The LED light will light to show that the remote control unit is working when a button is pushed.

Attention: Intertek ETL Semko Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: GRE North America FCC ID: TQB-PREDATION To whom it may concern, Request is hereby submitted by GRE North America to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: GRE North America Inc. wishes to keep these items confidential to maintain a competitive advantage in the marketplace. The $145 fee for confidentiality has been submitted along with the fee for certification. If you have questions or need further information, please contact the undersigned. Sincerely, Tim Hall Tim Hall Manager, Sales/Technology GRE North America Inc. Date: GRE North America 3030 McEver Road Bldg. 1 Suite 100 Gainesville, Georgia 30504 Ph: 770-538-0630 Fax: 770-538-0640 [email protected]

EMC Report for GRE North America on the M789 FCC Part 15.231 File: 3091771ATL-001 FCC ID: TQB-Predation Page 1 of 20 TEST REPORT Report Number: 3091771ATL-001 Project Number: 3091771 April 27th, 2006 Testing performed on the Remote Control Model Number: M789 to FCC Part 15.231 For GRE North America Test Performed by: Test Authorized by: Intertek ETL Semko 1950 Evergreen Blvd, Suite 100 Duluth, GA 30096 GRE North America 3030 McEver Road Gainsville, Georgia 30504 Prepared by: Date: April 27th, 2006 Chris Capelle, Project Engineer Reviewed by: Date: April 27th, 2006 David J. Schramm, EMC Department Manager All services undertaken are subject to the following general policy: This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST, or any agency of the US Government. Intertek EMC Report for GRE North America on the M789 FCC Part 15.231 File: 3091771ATL-001 FCC ID: TQB-Predation Page 2 of 20 TABLE OF CONTENTS 1 Summary of Tests .......................................................................................................................... 4 2 General Description....................................................................................................................... 5 2.1 Product Description............................................................................................................. 5 2.2 Related Submittal(s) Grants ................................................................................................ 5 2.3 Test Methodology................................................................................................................ 5 2.4 Test Facility........................................................................................................................ 6 3 System Test Configuration............................................................................................................ 6 3.1 Support Equipment.............................................................................................................. 6 3.2 Cabling................................................................................................................................ 6 3.3 Block Diagram of Test Setup .............................................................................................. 6 3.4 Justification ......................................................................................................................... 7 3.5 Software Exercise Program................................................................................................. 7 3.6 Mode of Operation during Test ........................................................................................... 7 3.7 Modifications Required for Compliance.............................................................................. 7 3.8 Additions, deviations and exclusions from standards .......................................................... 7 4 Measurement Results .................................................................................................................... 8 4.1 Radiated Emission...............................................................................................................8 4.1.1 Procedure ............................................................................................................... 8 4.1.2 Field Strength Calculation...................................................................................... 8 4.1.3 Modifications Required for Compliance................................................................. 9 4.1.4 Test Result ............................................................................................................. 9 4.2 AC Line Conducted Emission............................................................................................. 12 4.2.1 Measurement Procedure ......................................................................................... 12 4.2.2 Test Result ............................................................................................................. 12 4.3 Occupied Bandwidth Plot .................................................................................................... 13 4.4 Transmitter Duty Cycle Calculation and Measurements ..................................................... 14 5 Antenna Requirement.................................................................................................................... 19 6 List of test equipment .................................................................................................................... 20 7 Document History .......................................................................................................................... 20 INDEX OF FIGURES Figure 4-1: Bandwidth plot...........................................................................................................................13 Figure 4-2: Output – Pulse Train Sequence Width .......................................................................................14 Figure 4-3: Output – Pulse Sequenc…

Text truncated - open the document above for the full version.