
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
ANT GND 49.860MHZ TX CAR DIAGRAM Power Supply 9V RF AMP Modulator Program- compiling key RF Oscillator IC Encoder
Label Drawing 40mm Remote Control CAR Transmitter Model No.:001A-49 30mm FCC ID: TQWCAR49 Work Frequency: 49.860MHz 30mm Power: DC 9.0V Made in China 40mm 40mm Remote Control CAR Transmitter Model No.:001B-49 30mm FCC ID: TQWCAR49 Work Frequency: 49.860MHz 30mm Power: DC 9.0V Made in China 40mm
Operation Description of the Remote Control Car System. A) The Remote Control Unit ( Transmitter) Once the push power on switch, The control signal switch: TWU 1 (forward) TWU2(Backward), TWU3(Turn Left) TWU4(Turn Right) and EA1(Turbo) sending the corresponding signal to TX Module pin: S1, S2, S3, S4 and X1 respectively. The TX Moduleโs Encoder Control Circuit Unit generate the approximate required control signal and combine with 49.860 MHz Oscillation frequency, then modulate to precisely transmitter frequency. Finally the modulated 49.860MHz radio frequency is transmitted out via the transmission antenna. B) The Remote Control Car Main Unit: The receiver antenna (Ant module 1 from receiver circuit) receives the modulated 49.860MHz signal from TX module. The received signal is sent to RX-moduleโs Base band Control Function Decoder Unit for signal demodulation. The demodulate Unit(RX module) send out signal to Q15 (for forward), Q17 (for backward), Q11 (Turn Right), Q12 for (Turn left) and Q3 (Turbo), these transistors amplifier the signal and drive motor unit.
Page 1 of 23 FCC ID: TQWCAR49 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20051875 FCC CERTIFICATION On Behalf of Camke Development Ltd. Remote Control Car Transmitter Model No.: 001A-49, 001B-49 FCC ID: TQWCAR49 Prepared for : Camke Development Ltd. Address : Rm 1103-1105 Silvercord, Tower 2, 30 Canton Road, Tsimshatsui, Kowloon, Hongkong Prepared by : ACCURATE TECHNOLOGY CO. LTD Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20051875 Date of Test : November 3, 2005 Date of Report : November 8, 2005 Page 2 of 23 FCC ID: TQWCAR49 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20051875 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION.......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility......................................................................................................................4 1.3. Measurement Uncertainty.........................................................................................................................4 2. MEASURING DEVICE AND TEST EQUIPMENT..................................................................... 5 3. RADIATED EMISSION FOR FCC PART 15 SECTION 15.235(B)........................................... 6 3.1. Block Diagram of Test Setup....................................................................................................................6 3.2. The Field Strength of Radiation Emission Measurement Limits..............................................................6 3.3. Configuration of EUT on Measurement...................................................................................................7 3.4. Operating Condition of EUT....................................................................................................................7 3.5. Test Procedure..........................................................................................................................................7 3.6. The Field Strength of Radiation Emission Measurement Results............................................................8 4. FUNDAMENTAL RADIATED EMISSION FOR FCC PART 15 SECTION 15.235(A).......... 9 4.1. Block Diagram of Test Setup....................................................................................................................9 4.2. The Emission Limit For Section 15.235(a)..............................................................................................9 4.3. EUT Configuration on Measurement.....................................................................................................10 4.4. Operating Condition of EUT..................................................................................................................10 4.5. Test Procedure........................................................................................................................................10 4.6. The Emission Measurement Result........................................................................................................11 5. BAND EDGES FOR FCC PART 15 SECTION 15.235(B)......................................................... 12 5.1. The Requirement For Section 15.235(b)................................................................................................12 5.2. Configuration of EUT on Measurement.................................................................................................12 5.3. Operating Condition of EUT..................................................................................................................13 5.4. Test Procedure........................................................................................................................................13 5.5. The Field Strength of Radiation Emission Measurement Results..........................................................14 APPENDIX I ( TEST CURVES) (6pages) Page 3 of 23 Test Report Certification Applicant : Camke Development Ltd. Manufacturer : Chaoda Plastic Toys Factory EUT Description : Remote Control Car Transmitter (A) MODEL NO.: 001A-49, 001B-49 (B) SERIAL NO.: N/A (C) POWER SUPPLY: 9V DC (โ6F22โ batteries 1ร) Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart C Section 15.235: 2004 & ANSI C63.4: 2003 The device described above is tested by ACCURATE TECHNOLOGY CO. LTD to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C Section 15.235 limits. The measurement results are contained in this test report and ACCURATE TECHNOLOGY CO. LTD is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of ACCURATE TECHNOLOGY CO. LTD. Date of Test : November 3, 2005 Prepared by : (Engineer) Reviewer : (Quality Manager) Approved & Authorized Signer : (Manager) FCC ID: TQWCAR49 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20051875 Page 4 of 23 1. GENERAL INFORMATION 1.1. Description of Device (EUT) EUT : Remote Control Car Transmitter Model Number : 001A-49, 001B-49 (Note: The samples are same except the appearance color are different, So we prepare 001A-49 for test only.) Power Supply : 9V DC (โ6F22โ batteries 1ร) Applicant : Camke Development Ltd. Address : Rm 1103-1105 Silvercord, Tower 2, 30 Canton Road, Tsimshatsui, Kowloon, Hongkong Manufacturer : Chaoda Plastic Toys Factory Address : Fengxiang Industrial Zone, Chengโฆ
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 49.86 MHz - 49.86 MHz | - |

Remote Control Toy Transmitter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter