TTM-105P25M5 GHz Point to Point Fixed Link Radio Module

r-Series Digital Microwave Radios Installation and Management Manual Includes Models: EX-4.9r, EX-4.9r-c, EX-4.9r-x, EX-4.9r-xc EX-5r, EX-5r-c, EX-5r-x, EX-5r-xc Part Number: 50000007 Date: 2007-06-28 Exalt Communications Inc. r-series Installation and Management Manual 5000007 (ETS) ii 2007-05-31 (draft) Legal Notice The information contained herein is the property of Exalt Communications, Inc. (“Exalt”) and is supplied without liability for errors or omissions. No part of this document may be reproduced, in any form, except as authorized by contract or other written permission from the owner. Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. The contents of this document are current as of the date of publication. Exalt reserves the right to change the contents without prior notice. The publication of information in this document does not imply freedom from patent or other rights of Exalt or others. © 2007 Exalt Communications Inc. All rights reserved. The Exalt logo is a trademark of Exalt Communications, Inc. Open-Source License Information In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the EX-5r Digital Microwave Radios make use of public (open-source) software/firmware within the terms of use of their respective shared license agreements. Exalt will supply copies of any of this code, within the terms of their individual licensing agreements, upon request. Open-Source Code License Agreement Website Linux Operating System GNU GPL Version 2 www.gnu.org BusyBox CLI GNU GPL Version 2 www.gnu.org; www.busybox.net GoAhead Web Server Copyright (c) 2003 GoAhead Software, Inc. All Rights Reserved. www.goahead.com U-boot Boot Code GNU GPL Version 2 www.gnu.org www.sourceforge.net Net-SNMP (see Copyright Notices on page 84) www.sourceforge.net Exalt Communications Inc. r-series Installation and Management Manual 5000007 (ETS) iii 2007-05-31 (draft) About this Document This manual provides a complete description of the EX-5r family of Digital Microwave Radios and related software. This manual provides planners, engineers, installers, system administrators, and technicians general and specific information related to the planning, installation, operation, management, and maintenance of these devices. Revision History Date Detail 2006-09-18 EX-5r release 1.0.0 2006-12-20 Draft for ETSI/CE 2007-02-12 Draft for 4.9r series 2007-04-15 Draft for WEEE, RoHS, DFS 2007-06-11 Draft for RLK, EU, Regulatory Compliance Appendix 2007-06-25 Update for DFS, removed Proxim antenna Exalt Communications Inc. r-series Installation and Management Manual 5000007 (ETS) iv 2007-05-31 (draft) General Compliance and Safety The usage of radio transmission devices is subject to specific regulatory requirements governed by regional legislation. In most cases, the specific device must be authorized for use in a given country and must be installed and adjusted in accordance with specific radio-frequency settings and in a manner that has been authorized specific to the device itself in accordance with the specific location of the device. Some users may be completely or partially restricted from use of the device. Please consult local governmental agency/agencies for regulatory requirements before use, or contact Exalt or your Exalt authorized dealer for assistance. Do not modify this device in any way without the express written consent of Exalt. Modification voids the manufacturer warranty, and may also be illegal in accordance to government regulations. In addition, there are no user-serviceable parts or assemblies inside the product housing. There may also be voltages, signals, and mechanisms within the device that could be harmful to human safety. The mounting of this device and associated peripherals and connections (inclusive of antenna mast, antenna, cabling, egress, lightning protection devices, grounding, power, and so on) may be subject to regional requirements for health and human safety. A qualified professional installer and an electrician are highly recommended, and may be required by law. Exalt cannot warranty the device or be found liable for any unauthorized use or installation of the device. Safety Icons The following icons denote specific types of information. Note This symbol means take note. Notes contain helpful suggestions or references to materials not contained in the manual. Caution This symbol means be careful. There is a risk of equipment damage or loss of data. To reduce the risk, follow the instructions. This is a general warning, caution, or risk of danger. Warning This warning symbol means there is a risk of electric shock. This situation could cause bodily injury. To reduce the risk, before working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Exalt Communications Inc. r-series Installation and Management Manual 5000007 (ETS) v 2007-05-31 (draft) Safety Notices 1. Review this entire guide for important installation instructions BEFORE attempting to install this product. 2. This product is intended to be installed, used, and maintained by experienced telecommunications personnel only. 3. Employ a properly licensed or authorized electrician to install or evaluate/certify the installation of all power and grounding related to the use of this equipment and all connected devices. 4. The device(s) shall only be connected to AC or DC sources within the device specifications. Use a separate breaker circuit at the power source. 5. Lightning, surge protection devices, and earth grounding are required for most installations to ensure human safety. Consult a qualified electrician. 6. Servicing of this device should be performed by authorized personnel only. Do not disassemble this device. By opening or removing any covers you may expose yourself to hazardous energy parts. In…

Text truncated - open the document above for the full version.

i-Series Digital Microwave Radios Installation and Management Guide Models included: EX-2.4i EX-2.4i-16 EX-4.9i EX-5i EX-5i-16 Part Number: 50000001 Date: 2007-01-03 (draft) Exalt Communications, Inc. Exalt i-Series Installation and Management Guide 5000001 1 2007-06-25 Legal Notice The information contained herein is the property of Exalt Communications, Inc. (“Exalt”) and is supplied without liability for errors or omissions. No part of this document may be reproduced, in any form, except as authorized by contract or other written permission from the owner. Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. The contents of this document are current as of the date of publication. Exalt reserves the right to change the contents without prior notice. The publication of information in this document does not imply freedom from patent or other rights of Exalt or others. © 2007 Exalt Communications Inc. All rights reserved. The Exalt logo is a trademark of Exalt Communications, Inc. Open-Source License Information In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the Exalt i-Series of Digital Microwave Radios make use of public (open-source) software/firmware within the terms of use of their respective shared license agreements. Exalt will supply copies of any of this code, within the terms of their individual licensing agreements, upon request. Open-Source Code License Agreement Website Linux Operating System GNU GPL Version 2 www.gnu.org BusyBox CLI GNU GPL Version 2 www.gnu.org; www.busybox.net GoAhead Web Server Copyright (c) 2003 GoAhead Software, Inc. All Rights Reserved. www.goahead.com U-boot Boot Code GNU GPL Version 2 www.gnu.org www.sourceforge.net Net-SNMP (see Copyright Notices on page 117) www.sourceforge.net Exalt Communications, Inc. Exalt i-Series Installation and Management Guide 5000001 2 2007-06-25 About this Document This manual provides a complete description of the Exalt i-Series of Digital Microwave Radios and related software. This manual provides planners, engineers, installers, system administrators, and technicians general and specific information related to the planning, installation, operation, management, and maintenance of these devices. Revision History Date Products and Release code 2006-04-28 EX-2.4i initial release v1.0 2006-05-03 EX-2.4i maintenance release v1.0.1 2006-07-06 EX-5i initial release v1.0.0 2006-09-01 EX-2.4i release v1.1.0 (Mode2 feature release) EX-2.4i-16 and EX-5i-16 initial release v1.0.0 2006-09-27 EX-5i release 1.1.0 (SNMP feature release) 2006-10-27 EX-2.4i v1.2.0 (Sync and VLAN feature releases) EX-5i release v2.0.0 (Sync and VLAN feature releases) EX-2.4i and EX-5i-16 v1.1.1 (Sync feature release) 2007-01-03 EX-4.9i initial release 2007-04-15 Draft for WEEE, RoHS, DFS 2007-06-11 Draft for RLK, EU, Regulatory Compliance Appendix 2007-06-25 Update for DFS, removed Proxim antenna Exalt Communications, Inc. Exalt i-Series Installation and Management Guide 5000001 3 2007-06-25 General Compliance and Safety The usage of radio transmission devices is subject to specific regulatory requirements governed by regional legislation. In most cases, the specific device must be authorized for use in a given country and must be installed and adjusted in accordance with specific radio-frequency settings and in a manner that has been authorized specific to the device itself in accordance with the specific location of the device. Some users may be completely or partially restricted from use of the device. Please consult local governmental agency/agencies for regulatory requirements before use, or contact Exalt or your Exalt authorized dealer for assistance. Do not modify this device in any way without the express written consent of Exalt. Modification voids the manufacturer warranty, and may also be illegal in accordance to government regulations. In addition, there are no user-serviceable parts or assemblies inside the product housing. There may also be voltages, signals, and mechanisms within the device that could be harmful to human safety. The mounting of this device and associated peripherals and connections (inclusive of antenna mast, antenna, cabling, egress, lightning protection devices, grounding, power, and so on) may be subject to regional requirements for health and human safety. A qualified professional installer and an electrician are highly recommended, and may be required by law. Exalt cannot warranty the device or be found liable for any unauthorized use or installation of the device. Safety Icons The following icons denote specific types of information. Note This symbol means take note. Notes contain helpful suggestions or references to materials not contained in the manual. Caution This symbol means be careful. There is a risk of equipment damage, loss of data, or injury to persons. To reduce the risk, follow the instructions. This is a general warning, caution, or risk of danger. Warning This warning symbol means there is a risk of electric shock. This situation could cause bodily injury. To reduce the risk, before working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Exalt Communications, Inc. Exalt i-Series Installation and Management Guide 5000001 4 2007-06-25 Safety Notices 1. Review this entire guide for important installation instructions BEFORE attempting to install this product. 2. This product is intended to be installed, used, and maintained by experienced telecommunications personnel only. 3. Employ a properly licensed or authorized electrician to install or evaluate/certify the installation of all power and grounding related to the use of this equipment and all connected devices. 4. The device(s) shall only be connected to AC or DC sources within the device specifications. Use a separate break…

Text truncated - open the document above for the full version.

EX-5 Series Digital Microwave Radio Module Part Number: 5xxxxxxx Date: 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide 5xxxxxxx 1 2007-06-29 Legal Notice The information contained herein is the property of Exalt Communications, Inc. (“Exalt”) and is supplied without liability for errors or omissions. No part of this document may be reproduced, in any form, except as authorized by contract or other written permission from the owner. Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. The contents of this document are current as of the date of publication. Exalt reserves the right to change the contents without prior notice. The publication of information in this document does not imply freedom from patent or other rights of Exalt or others. © 2007 Exalt Communications Inc. All rights reserved. The Exalt logo is a trademark of Exalt Communications, Inc. Open-Source License Information In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the Exalt EX-5 Series of Digital Microwave Radios make use of public (open- source) software/firmware within the terms of use of their respective shared license agreements. Exalt will supply copies of any of this code, within the terms of their individual licensing agreements, upon request. Open-Source Code License Agreement Website Linux Operating System GNU GPL Version 2 www.gnu.org BusyBox CLI GNU GPL Version 2 www.gnu.org; www.busybox.net GoAhead Web Server Copyright (c) 2003 GoAhead Software, Inc. All Rights Reserved. www.goahead.com U-boot Boot Code GNU GPL Version 2 www.gnu.org www.sourceforge.net Net-SNMP (see Copyright Notices on page 14) www.sourceforge.net Exalt Communications, Inc. Exalt EX-5 Series Guide 5xxxxxxx 2 2007-06-29 About this Document This manual provides a description of the Exalt EX-5 Series Digital Microwave Radio Module. Revision History Date Products and Release code 2007-06-29 EX-5 Series Radio Module Guide Exalt Communications, Inc. Exalt EX-5 Series Module Guide 5xxxxxxx 3 2007-06-29 General Compliance and Safety The usage of radio transmission devices is subject to specific regulatory requirements governed by regional legislation. In most cases, the specific device must be authorized for use in a given country and must be installed and adjusted in accordance with specific radio-frequency settings and in a manner that has been authorized specific to the device itself in accordance with the specific location of the device. Some users may be completely or partially restricted from use of the device. Please consult local governmental agency/agencies for regulatory requirements before use, or contact Exalt or your Exalt authorized dealer for assistance. Do not modify this device in any way without the express written consent of Exalt. Modification voids the manufacturer warranty, and may also be illegal in accordance to government regulations. In addition, there are no user-serviceable parts or assemblies inside the product housing. There may also be voltages, signals, and mechanisms within the device that could be harmful to human safety. The mounting of the system and associated peripherals and connections (inclusive of antenna mast, antenna, cabling, egress, lightning protection devices, grounding, power, and so on) may be subject to regional requirements for health and human safety. A qualified professional installer and an electrician may be required by law. Exalt cannot warranty the device or be found liable for any unauthorized use or installation of the device. Safety Icons The following icons denote specific types of information. Note This symbol means take note. Notes contain helpful suggestions or references to materials not contained in the manual. Caution This symbol means be careful. There is a risk of equipment damage, loss of data, or injury to persons. To reduce the risk, follow the instructions. This is a general warning, caution, or risk of danger. Warning This warning symbol means there is a risk of electric shock. This situation could cause bodily injury. To reduce the risk, before working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Exalt Communications, Inc. Exalt EX-5 Series Guide 5xxxxxxx 4 2007-06-29 Safety Notices 1. Review this entire guide for important installation instructions BEFORE attempting to install this product. 2. The end-product is intended to be installed, used, and maintained by experienced telecommunications personnel only. 3. Do not move or alter the marking labels. Exalt Communications, Inc. Exalt EX-5 Series Module Guide 5xxxxxxx 5 2007-06-29 Table of Contents Legal Notice........................................................................................................................ 1 Open-Source License Information ...................................................................................... 1 About this Document .......................................................................................................... 2 Revision History ............................................................................................................. 2 General Compliance and Safety.......................................................................................... 3 Safety Icons..................................................................................................................... 3 Safety Notices ..................................................................................................................... 4 Introduction......................................................................................................................... 7 Related Documentation and Software ............................................................................ 7 The Exalt EX-5 Series of Digital Microwave Radio…

Text truncated - open the document above for the full version.

580 Division St., Campbell, CA 95008 USA Tel: +1 (408) 871-1804 fax: +1 (408) 871-9750 June 28, 2007 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; 580 Division St., Campbell, CA 95008 USA Tel: +1 (408) 871-1804 fax: +1 (408) 871-9750 g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Lisa Moratti Compliance Manager Exalt Communications, Inc.

580 Division St., Campbell, CA 95008 USA Tel: +1 (408) 871-1804 fax: +1 (408) 871-9750 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: TTM-105P25M To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 45 days after the grant is issued. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Lisa Moratti Compliance Manager Exalt Communications, Inc. Email: [email protected] Phone: +1 (408) 871-1804 x-295 www.exaltcom.com

580 Division St., Campbell, CA 95008 USA Tel: +1 (408) 871-1804 fax: +1 (408) 871-9750 Exalt Communications, Inc. FCC ID: TTM-105P25M Request for transmitter modular approval Transmitter Module Characteristics Item Requirements EUT 1 Have its own RF shielding Device is equipped with Metal shielding to cover RF section. Refer to external photos. 2 Have buffered modulation/data inputs (if such inputs are provided), All inputs to the modules are buffered through logic or microprocessor inputs. 3 Have it own power supply regulation Internal 5V, 3.3V, 10V, and 7.8V power regulators on digital board. Refer to Block diagram. 4 Meet the antenna requirements of Section 15.203 Device is equipped with unique antenna connector. Refer to external photos. 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested inside the metal enclosure for limited modular approval. Refer to setup photos. 6 Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Two proposed FCC ID label format are included in the filing. One of label is to be placed on the module and the other label is to be placed on the outside of system. Refer to FCC ID label format and location file. 7 The modular transmitter is manufactured so that the user cannot influence the operation of the transmitter that will operate outside of the scope of the regulations. Refer to “User’s Guide” Exhibit 8 Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). meet Commission's RF exposure limits Lisa Moratti Compliance Manager Exalt Communications Inc. Phone: +1(408) 871-1804 x-295 Email: [email protected] www.exaltcom.com

PROPOSED FCC ID LABEL AND LOCATION Bottom of Module FCC Label Location EXALT COMMUNICATIONS INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: TTM-105P25M PROPOSED FCC ID LABEL FOR HOST DEVICE EXALT COMMUNICATIONS INC. This device contains FCC ID: TTM-105P25M

Mid-band Gain dBi3dB (Azimuth/Elevation) Beamwidth (mid-band)(degrees) AndrewP2F-52-N2-foot Dish 29.45.4 AndrewP3F-52-N3-foot Dish 33.43.8 AndrewP4F-52-NXA4-foot Dish 34.93 AndrewP6F-52-NXA6-foot Dish 37.61.8 AndrewHP2F-52-NPA2-foot HP Dish 295.4 AndrewHP3F-52-NPA3-foot HP Dish 333.8 AndrewHP4F-52-NPA4-foot HP Dish 34.53 AndrewHP6F-52-NPA6-foot HP Dish 37.21.8 AndrewFPA5250D06-N6-inch Panel 1819.3 AndrewFPA5250D12-N1-foot Panel 23.69.6 GabrielDFPS.5-526-inch Panel18 19 GabrielDFPD1-521-foot Panel 23.59.4 GabrielDFPD2-522-foot Panel 284.6 GabrielQF2-52-N2-foot Dish 28.55.6 GabrielQF2.5-52-N2.5-foot Dish 31.24.4 GabrielQF4-52-N4-foot Dish 34.82.7 GabrielQF6-52N6-foot Dish 37.81.9 GabrielHQF2-52-N2-foot HP Dish 28.25.7 GabrielHQF4-52-N4-foot HP Dish 34.42.8 GabrielHQF6-52-N6-foot HP Dish 37.41.9 MTIMT-4850017.5-inch Panel 1918 MTIMT-4850021-foot Panel 239 MTIMT-48600418-inch Panel 266 MTIMT-4860012-foot Panel 284.5 Radio WavesFP.5-5-186-inch Panel18 20 Radio WavesFP1-5-241-foot Panel 23.810 Radio WavesFP2-5-282-foot Panel 284.5 Radio WavesSP1-5.21-foot Dish 22.511.1 Radio WavesSP2-5.22-foot Dish 296.1 Radio WavesHP2-5.22-foot HP Dish 28.66.1 Radio WavesSP3-5.23-foot Dish 324 Radio WavesSP4-5.24-foot Dish 34.83 Radio WavesSP6-5.26-foot Dish 37.92 RFSSPF2-52A2-foot Dish 27.96.2 RFSSPF3-52A3-foot Dish 31.44.2 RFSSPF4-52A4-foot Dish 33.93.1 RFSSPF6-52A6-foot Dish 37.42.1 RFSSDF4-52A4-foot HP Dish 33.93.1 RFSSDF6-52A6-foot HP Dish 37.42.1 RFSMA0528-19AN7.5-inch Panel 1918 RFSMA0528-23AN1-foot Panel 239 RFSMA0528-28AN2-foot Panel 284.5 ManufacturerModel #Description

7 KP GRIDPAK ® Antennas – F-Series Unpressurized Single Polarized Type DiameterAntennaAntennaRadomeGain,dBiBeamwidth Cross Pol. F/B Ratio VSWR Max. Numberft (m)InputColorLowMid-Band TopDegreesDisc.,dBdB(R.L., dB) KP3F-23-NWM3 (0.9)N FemaleUnpaintedNone24.725.125.38.138301.20 (20.8) KP3F-23-FWM3 (0.9)F Flange, FemaleUnpaintedNone24.725.125.38.138301.20 (20.8) KP3F-23-EWM3 (0.9)7/8" EIA FlangeUnpaintedNone24.725.125.38.138301.20 (20.8) KP4F-23-NWM4 (1.2)N FemaleUnpaintedNone27.227.527.86.930301.20 (20.8) KP4F-23-FWM4 (1.2)F Flange, FemaleUnpaintedNone27.227.527.86.930301.20 (20.8) KP4F-23-EWM4 (1.2)7/8" EIA FlangeUnpaintedNone27.227.527.86.930301.20 (20.8) KP6F-23-NWM6 (2.0)N FemaleUnpaintedNone31.031.331.64.530361.10 (26.4) KP6F-23-FWM6 (2.0)F Flange, FemaleUnpaintedNone31.031.331.64.530361.10 (26.4) KP6F-23-EWM6 (2.0)7/8" EIA FlangeUnpaintedNone31.031.331.64.530361.10 (26.4) KP8F-23-NWM8 (2.4)N FemaleUnpaintedNone32.632.933.13.430351.08 (28.3) KP8F-23-FWM8 (2.4)F Flange, FemaleUnpaintedNone32.632.933.13.430351.08 (28.3) KP8F-23-EWM8 (2.4)7/8" EIA FlangeUnpaintedNone32.632.933.13.430351.08 (28.3) KP10F-23-NWM10 (3.0)N FemaleUnpaintedNone34.534.835.13.030381.08 (28.3) KP10F-23-FWM10 (3.0)F Flange, FemaleUnpaintedNone34.534.835.13.030381.08 (28.3) KP10F-23-EWM10 (3.0)7/8" EIA FlangeUnpaintedNone34.534.835.13.030381.08 (28.3) KP13F-23-NWM13 (4.0)N FemaleUnpaintedNone37.037.237.52.430381.08 (28.3) KP13F-23-FWM13 (4.0)F Flange, FemaleUnpaintedNone37.037.237.52.430381.08 (28.3) KP13F-23-EWM13 (4.0)7/8" EIA FlangeUnpaintedNone37.037.237.52.430381.08 (28.3) * Horizontal = 13.3 degrees ** Horizontal = 8.7 degrees *** Horizontal = 6.7 degrees **** Horizontal = 3.4 degrees Type DiameterPolarizationAntennaAntennaRadomeGain,dBiBeamwidth Cross Pol. F/B Ratio VSWR Max. Numberft (m)InputColorLow Mid-BandTopDegreesDisc.,dBdB(R.L., dB) Standard Antennas – Unpressurized P2F-52-N7A2 (0.6)SingleN FemaleGrayNone29.029.430.15.430411.5 (14.0) P2F-52-NXA2 (0.6)SingleN FemaleGrayMolded29.029.430.15.430411.5 (14.0) PX2F-52-N7A2 (0.6)DualN FemaleGrayNone29.029.430.15.430411.5 (14.0) PX2F-52-NXA2 (0.6)DualN FemaleGrayMolded29.029.430.15.430411.5 (14.0) P3F-52-N7A3 (1.0)SingleN FemaleGrayNone33.433.433.53.830421.5 (14.0) P3F-52-NXA3 (1.0)SingleN FemaleGrayMolded33.433.433.53.830421.5 (14.0) PX3F-52-N7A3 (1.0)DualN FemaleGrayNone33.433.433.53.830421.5 (14.0) PX3F-52-NXA3 (1.0)DualN FemaleGrayMolded33.433.433.53.830421.5 (14.0) P4F-52-N7A4 (1.2)SingleN FemaleGrayNone34.534.935.33.030521.5 (14.0) P4F-52-NXA4 (1.2)SingleN FemaleGrayMolded34.534.935.33.030521.5 (14.0) PX4F-52-N7A4 (1.2)DualN FemaleGrayNone34.534.935.33.030521.5 (14.0) PX4F-52-NXA4 (1.2)DualN FemaleGrayMolded34.534.935.33.030521.5 (14.0) P6F-52-N7A6 (1.8)SingleN FemaleGrayNone37.037.638.11.830491.5 (14.0) P6F-52-NXA6 (1.8)SingleN FemaleGrayMolded37.037.638.11.830491.5 (14.0) PX6F-52-N7A6 (1.8)DualN FemaleGrayNone37.037.638.11.830491.5 (14.0) PX6F-52-NXA6 (1.8)DualN FemaleGrayMolded37.037.638.11.83…

Text truncated - open the document above for the full version.