TVE-1117013IP Camera

FortiCam CD51 QuickStart Guide forticam-CD51.indd 1forticam-CD51.indd 17/6/2021 9:18:40 AM7/6/2021 9:18:40 AM July 6, 2021 1st Edition Copyright © 2021 Fortinet, Inc. All rights reserved. Fortinet ® , FortiGate ® , FortiCare ® and FortiGuard ® , and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. Technical Documentation https://docs.fortinet.com Knowledge Base https://kb.fortinet.com Forums https://forum.fortinet.com Customer Service & Support https://support.fortinet.com Training Services https://training.fortinet.com forticam-CD51.indd 2forticam-CD51.indd 27/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Package Contents 4 Hardware Installation 5 Mounting Plate Details 12 Status LED Explanation 14 Camera Connection 15 Technical Specifications 17 Register for Support 19 Cautions and Warnings 20 Regulatory Notices 21 Table of Contents forticam-CD51.indd 3forticam-CD51.indd 37/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Page 4 Package Contents Camera Box • FortiCam camera • QSG • EMT adapter • Mounting plate • Replacement dry pack Accessory Box • Torx T10 allen key • Waterproof connection kit • Grounding kit • Machine bolt kit • 4x M4 bolts (M4x10mm) • Screw and plug kit • 2x short screw (4x20mm) • 2x long screw (4x32mm) • 2x anchors • T-bar mount kit • 2x 3/4” clips • 2x 1” clips • 2x M3 bolts (M3x16mm) • 2x M3 nuts forticam-CD51.indd 4forticam-CD51.indd 47/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Page 5 Hardware Installation • Before installing surveillance cameras, design your system carefully and verify the location and coverage of each camera. Additionally, decide whether to run the cables through the wall/ceiling (drilling required) or along the wall/ceiling through the cable notch on the base. • Install the camera in a protected location that is not easily accessible, and is away from impacts or heavy vibrations. • Avoid exposure to direct sunlight in outdoor installation for better image quality and longer service life. • Provide adequate grounding to the unit and the PoE injector, in compliance with your local electrical code or regulations. The grounding wire color must be a green-and-yellow combination and the conductor size must be a minimum of 18 AWG. • Hire qualified technicians to carry out maintenance and repairs. Disconnect power from the unit when performing maintenance tasks. forticam-CD51.indd 5forticam-CD51.indd 57/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Page 6 There are multiple ways to install the CD51 camera. To determine your optimal installation method, consult the Mounting Guide. The following procedure demonstrates installing the camera on the wall or ceiling using the standard mounting procedure: Important: Important: Only remove the protective wrap from the camera lens when the entire installation process is completed to avoid damage and scratches. Note:Note: You can use the longer screws and plugs to directly mount the camera body to a surface without using the mounting plate. Note:Note: For mounting the camera on a tiled suspended ceiling, select the fitting pair of T-bar clips and attach them to the camera body using the M3 bolts and nuts. Use the tip of the allen key to hold the nuts and push them down in the mounting holes while tightening the M3 bolts. Click the camera directly on a T-bar rail, making sure it is a correct fit. 1. Place the mounting plate on the ceiling or wall and mark the drilling positions using any opposite pair of holes or slots. Keep in mind the direction of the camera facing and where the cable leaves the camera when mounting. Consult the Mounting Plate Details diagram on page 13 for facing direction and an explanation of the mounting holes. forticam-CD51.indd 6forticam-CD51.indd 67/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Page 7 2. Drill holes at the marked positions and use the supplied plugs and screws to attach the mounting plate to the surface. 3. Remove the small cover at the side of the camera if the cable is not fed through a hole in the wall or ceiling. 4. If using Electro Mechanical Tubing, attach the EMT adapter to the mounting plate with the two M3 nuts supplied in the T-bar mounting kit. Install the ¾” EMT conduit to the camera location and attach it to the EMT adapter. Use the short screws (4mm x 20mm) and plugs to connect the adapter plate to the surface. forticam-CD51.indd 7forticam-CD51.indd 77/6/2021 9:18:40 AM7/6/2021 9:18:40 AM Page 8 5. Assemble the waterproof connector onto the Ethernet cable. 6. Connect the Ethernet cable. The cable can be stored in the EMT tubing or in the hole in the wall or ceiling. 7. Open camera housing using the 3 cover screws with…

Text truncated - open the document above for the full version.

FortiCam CD55 QuickStart Guide forticam-CD55.indd 1forticam-CD55.indd 17/6/2021 9:17:46 AM7/6/2021 9:17:46 AM July 6, 2021 1st Edition Copyright © 2021 Fortinet, Inc. All rights reserved. Fortinet ® , FortiGate ® , FortiCare ® and FortiGuard ® , and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. Technical Documentation https://docs.fortinet.com Knowledge Base https://kb.fortinet.com Forums https://forum.fortinet.com Customer Service & Support https://support.fortinet.com Training Services https://training.fortinet.com forticam-CD55.indd 2forticam-CD55.indd 27/6/2021 9:17:46 AM7/6/2021 9:17:46 AM Package Contents 4 Hardware Installation 5 Mounting Plate Details 12 Status LED Explanation 14 Camera Connection 15 Technical Specifications 17 Register for Support 19 Cautions and Warnings 20 Regulatory Notices 21 Table of Contents forticam-CD55.indd 3forticam-CD55.indd 37/6/2021 9:17:46 AM7/6/2021 9:17:46 AM Page 4 Package Contents Camera Box • FortiCam camera • QSG • EMT adapter • Mounting plate • Replacement dry pack Accessory Box • Torx T10 allen key • Waterproof connection kit • Grounding kit • Machine bolt kit • 4x M4 bolts (M4x10mm) • Screw and plug kit • 2x short screw (4x20mm) • 2x long screw (4x32mm) • 2x anchors • T-bar mount kit • 2x 3/4” clips • 2x 1” clips • 2x M3 bolts (M3x16mm) • 2x M3 nuts forticam-CD55.indd 4forticam-CD55.indd 47/6/2021 9:17:46 AM7/6/2021 9:17:46 AM Page 5 Hardware Installation • Before installing surveillance cameras, design your system carefully and verify the location and coverage of each camera. Additionally, decide whether to run the cables through the wall/ceiling (drilling required) or along the wall/ceiling through the cable notch on the base. • Install the camera in a protected location that is not easily accessible, and is away from impacts or heavy vibrations. • Avoid exposure to direct sunlight in outdoor installation for better image quality and longer service life. • Provide adequate grounding to the unit and the PoE injector, in compliance with your local electrical code or regulations. The grounding wire color must be a green-and-yellow combination and the conductor size must be a minimum of 18 AWG. • Hire qualified technicians to carry out maintenance and repairs. Disconnect power from the unit when performing maintenance tasks. forticam-CD55.indd 5forticam-CD55.indd 57/6/2021 9:17:46 AM7/6/2021 9:17:46 AM Page 6 There are multiple ways to install the CD55 camera. To determine your optimal installation method, consult the Mounting Guide. The following procedure demonstrates installing the camera on the wall or ceiling using the standard mounting procedure: Important: Important: Only remove the protective wrap from the camera lens when the entire installation process is completed to avoid damage and scratches. Note:Note: You can use the longer screws and plugs to directly mount the camera body to a surface without using the mounting plate. Note:Note: For mounting the camera on a tiled suspended ceiling, select the fitting pair of T-bar clips and attach them to the camera body using the M3 bolts and nuts. Use the tip of the allen key to hold the nuts and push them down in the mounting holes while tightening the M3 bolts. Click the camera directly on a T-bar rail, making sure it is a correct fit. 1. Place the mounting plate on the ceiling or wall and mark the drilling positions using any opposite pair of holes or slots. Keep in mind the direction of the camera facing and where the cable leaves the camera when mounting. Consult the Mounting Plate Details diagram on page 13 for facing direction and an explanation of the mounting holes. forticam-CD55.indd 6forticam-CD55.indd 67/6/2021 9:17:47 AM7/6/2021 9:17:47 AM Page 7 2. Drill holes at the marked positions and use the supplied plugs and screws to attach the mounting plate to the surface. 3. Remove the small cover at the side of the camera if the cable is not fed through a hole in the wall or ceiling. 4. If using Electro Mechanical Tubing, attach the EMT adapter to the mounting plate with the two M3 nuts supplied in the T-bar mounting kit. Install the ¾” EMT conduit to the camera location and attach it to the EMT adapter. Use the short screws (4mm x 20mm) and plugs to connect the adapter plate to the surface. forticam-CD55.indd 7forticam-CD55.indd 77/6/2021 9:17:47 AM7/6/2021 9:17:47 AM Page 8 5. Assemble the waterproof connector onto the Ethernet cable. 6. Connect the Ethernet cable. The cable can be stored in the EMT tubing or in the hole in the wall or ceiling. 7. Open camera housing using the 3 cover screws with…

Text truncated - open the document above for the full version.

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Confidentiality Request Date: March 1, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: TVE-1117013 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Description ● Software Security For U-NII Devices The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Power of Attorney Date: March 1, 2021 FCC ID: TVE-1117013 To whom it may concern, We, the undersigned, Fortinet, Inc., hereby authorize Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, and the signing of documents relating to these matters. Any documents submitted by Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) within the scope of this authorization shall have the same effects as if submitted by Fortinet, Inc., provided, in all events, (a) Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) has acted legally, in good faith and properly in furtherance of obtaining the FCC approval of our products, (b) the only documents submitted by Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) on our behalf have been reviewed and approved by an authorized representative of Fortinet, Inc. in advance of Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) submittal, and (c) Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”) provides to the Fortinet Legal team a copy of the document submitted at the same time as submittal. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Reference No.: BDYS-WTW-P21010020_EXT Page No. 1 / 9 CONSTRUCTION PHOTOS OF EUT Model: FCM-CD51 Reference No.: BDYS-WTW-P21010020_EXT Page No. 2 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 3 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 4 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 5 / 9 Model: FCM-CD55 Reference No.: BDYS-WTW-P21010020_EXT Page No. 6 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 7 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 8 / 9 Reference No.: BDYS-WTW-P21010020_EXT Page No. 9 / 9

- Dimension: 55*32 mm - Material: #50 Silver Polyester Label - Coating: #25 Matt Transparent OPP Film - Outside handle: with adhesive backing - Color: Black - Dimension: 40*30 mm - Material: #50 White Polyester Label - Outside handle: with adhesive backing Abbie 2021/02/08 6710A8263000 1 1 Tiffany 比例：100 % SN Label - 6710A0483010 Sliver Label - 6710A8263000 HOT R1 55 32 Model : FCM-CDxx HWID : XXXXXX-XXXX-XXXX Fortinet P/N : PXXXXX-01-01 S/N : XXXXXXXX00000001 MAC : XX:XX:XX:XX:XX:XX FortiCam CD51 Model:FCM-CD51 FCM-CD51 FCM-CD55 FCC ID: TVE-1117013 IC: 7280B-1117013 CAN ICES-3 (B) / NMB-3 (B) Input: 48Vdc 0.35A(POE) Date: YYYY-MM-DD R-NZ FortiCam CD55 Model:FCM-CD55 FCC ID: TVE-1117013 IC: 7280B-1117013 CAN ICES-3 (B) / NMB-3 (B) Input: 48Vdc 0.35A(POE) R-NZ General Comment: *The rating label revised by EC13103-01 *圖面型號僅供參考，型號/FCC ID/輸入/版本別 請依照客戶 Fortinet SILVER_LABEL_INFORMATION_FORM通知更新. *The certification symbols are based on the Silver Label Format: P02251-01-42_MECH_LABEL_SILVER_2X4IN_released_REL01_ROHS-6_20201222 *安規符號根據銀標格式製作: P02251-01-42_MECH_LABEL_SILVER_2X4IN_released_REL01_ROHS-6_20201222 *FortiCloud Key Fonts is Arial Bold. *FortiCloud Key 字型使用Arial Bold. Assembled in Taiwan Date: YYYY-MM-DD Assembled in Taiwan IP67IP67

Reference No.: BDYS-WTW-P21010020_INT Page No. 1 / 9 CONSTRUCTION PHOTOS OF EUT Model: FCM-CD51 Reference No.: BDYS-WTW-P21010020_INT Page No. 2 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 3 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 4 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 5 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 6 / 9 Model: FCM-CD55 Reference No.: BDYS-WTW-P21010020_INT Page No. 7 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 8 / 9 Reference No.: BDYS-WTW-P21010020_INT Page No. 9 / 9

Report No.: SABDYS-WTW-P21010020 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABDYS-WTW-P21010020 FCC ID: TVE-1117013 Test Model: FCM-CD51, FCM-CD55 Series Model: FCM-CD51xxxxxx, FORTICAM-CD51xxxxxx, FortiCam CD51xxxxxx, FCM-CD55xxxxxx, FORTICAM-CD55xxxxxx, FortiCam CD55xxxxxx (where "x" can be used as "A-Z", or "0-9", or "-", or blank for software changes or marketing purposes only) Received Date: Jan. 04, 2021 Test Date: Feb. 05 ~ May 14, 2021 Issued Date: May 21, 2021 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABDYS-WTW-P21010020 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 5 Report No.: SABDYS-WTW-P21010020 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABDYS-WTW-P21010020 Original release. May 21, 2021 Report No.: SABDYS-WTW-P21010020 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: IP Camera Brand: Fortinet Test Model: FCM-CD51, FCM-CD55 Series Model: FCM-CD51xxxxxx, FORTICAM-CD51xxxxxx, FortiCam CD51xxxxxx, FCM-CD55xxxxxx, FORTICAM-CD55xxxxxx, FortiCam CD55xxxxxx (where "x" can be used as "A-Z", or "0-9", or "-", or blank for software changes or marketing purposes only) Sample Status: Engineering sample Applicant: Fortinet lnc. Test Date: Feb. 05 ~ May 14, 2021 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 21, 2021 Polly Chien / Specialist Approved by : , Date: May 21, 2021 Bruce Chen / Senior Project Engineer Report No.: SABDYS-WTW-P21010020 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max. AV Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412~2462 20.21 3.4 20 0.046 1 WLAN 5180~5240 18.75 4.1 20 0.038 1 WLAN 5745~5825 17.19 2.9 20 0.020 1 BT EDR 2402~2480 3.81 3.4 20 0.001 1 BT LE 2402~2480 5.01 3.4 20 0.001 1 * The device WLAN 2.4GHz, 5GHz and BT cannot transmit simultane…

Text truncated - open the document above for the full version.

Report No.: RFBDYS-WTW-P21010020-1 Page No. 1 / 72 Report Format Version:6.1.2 FCC Test Report Report No.: RFBDYS-WTW-P21010020-1 FCC ID: TVE-1117013 Test Model: FCM-CD51, FCM-CD55 Series Model: FCM-CD51xxxxxx, FORTICAM-CD51xxxxxx, FortiCam CD51xxxxxx, FCM-CD55xxxxxx, FORTICAM-CD55xxxxxx, FortiCam CD55xxxxxx (where "x" can be used as "A-Z", or "0-9", or "-", or blank for software changes or marketing purposes only) (Refer to item 3.1 for more details) Received Date: Jan. 04, 2021 Test Date: Feb. 05 ~ May 14, 2021 Issued Date: May 21, 2021 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBDYS-WTW-P21010020-1 Page No. 2 / 72 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 41 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 41 4.2.2 Test Instruments ................................................................................................................................ 41 4.2.3 Test Procedures ...............…

Text truncated - open the document above for the full version.

Reference No.: BDYS-WTW-P21010020_TSup Page No. 1 / 3 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Reference No.: BDYS-WTW-P21010020_TSup Page No. 2 / 3 Radiated Emission below 1GHz Test Reference No.: BDYS-WTW-P21010020_TSup Page No. 3 / 3 Radiated Emission above 1GHz Test