TVE-111M01Secure Network Extension Device

QuickStart Guide FortiExtender 200F FortiExtender-200F-QuickStart.indd 1FortiExtender-200F-QuickStart.indd 11/25/2021 12:19:34 PM1/25/2021 12:19:34 PM January 25, 2021 Copyright © 2020 Fortinet, Inc. All rights reserved. Fortinet ® , FortiGate ® , FortiCare ® and FortiGuard ® , and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. FortiExtender-200F-QuickStart.indd 2FortiExtender-200F-QuickStart.indd 21/25/2021 12:19:34 PM1/25/2021 12:19:34 PM QuickStart Guide Register for Support Register your Fortinet product to receive: • Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di: • Supporto Tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce Debe registrar el producto para recibir: • Apoyo técnico • Nuevas funcionalidades del producto • Protección contra ataques 登録のお願い 本日、フォーティネット製品の登録をしてくだ さい。 登録すると次のメリットがあります。 テクニカルサポート • 新機能の追加 • 新しい脅 威への防御 请马上注册 您的飞塔产品 您在注册以后才能得到技术支持、新产品特点 信息、最新威胁防护 https://support.fortinet.com Toll free: 1 866 648 4638 Phone: 1 408 486 7899 Fax: 1 408 235 7737 Email: [email protected] FortiExtender-200F-QuickStart.indd 3FortiExtender-200F-QuickStart.indd 31/25/2021 12:19:35 PM1/25/2021 12:19:35 PM Packing List QuickStart Guide Anchors and Screws Rubber Feet FortiExtender 200F 12V/1A Power Adapter Power Adapter Plug Tips (US/EU) Wall-mount Ears 4 FortiExtender-200F-QuickStart.indd 4FortiExtender-200F-QuickStart.indd 41/25/2021 12:19:35 PM1/25/2021 12:19:35 PM Power Adapter Plug Tips (US/EU) Product Description FortiExtender 200F is a data terminal device to serves as an extension of the FortiGate LAN interface, which connects to the central FortiGate through a secured L-2 tunnel, to apply central Layer-2 through Layer-7 security solutions for small branch and remote offices. It features five GbE RJ-45 ports, each of which can be independently configured as a WAN or LAN port using the software. 5 FortiExtender-200F-QuickStart.indd 5FortiExtender-200F-QuickStart.indd 51/25/2021 12:19:35 PM1/25/2021 12:19:35 PM Ports, LEDs, and Buttons USB Port RJ45 Port LEDs 12V Input (Use the 12V/1A power adapter) Console Port WAN/LAN Port LEDsSystem LED Bluetooth LED FortiGate LED Bluetooth Button Reset/Default Button Grounding Tab (Optional) Power Input 6 FortiExtender-200F-QuickStart.indd 6FortiExtender-200F-QuickStart.indd 61/25/2021 12:19:35 PM1/25/2021 12:19:35 PM LEDBehavior and Description SYS (System) • Off—No power. • Green—In normal operation; flashing when booting up. • Amber—Error/warning. FGT (FortiGate) • Green Steady—Connected to centeral FortiGate. • Green Flashing—Connecting to central FortiGate. • Amber Steady—Failed to connect to central FortiGate. • Off—Not connected to central FortiGate (No attempt has been made yet). BT (Bluetooth) • Green Steady—The Bluetooth configuration window is open, waiting for pairing and bluetooth system configuration. • Blue Flashing—Bluetooth configuration is in progress. • Blue Steady—Bluetooth configuration is completed. The LED will turn off in 5 seconds. WAN/LAN Port LEDs PortBehavior and Description 1• On—Port 1 configured as WAN port. • Off— Port 1 configured as LAN port. 2• On—Port 2 configured as WAN port. • Off— Port 2 configured as LAN port. 3• On—Port 3 configured as WAN port. • Off—Port 3 configured as LAN port. 4• On—Port 4 configured as WAN port. • Off—Port4 configured as LAN port. 5• On—Port 5 configured as WAN port. • Off—Port 5 configured as LAN port. Operation Status LEDs 7 FortiExtender-200F-QuickStart.indd 7FortiExtender-200F-QuickStart.indd 71/25/2021 12:19:35 PM1/25/2021 12:19:35 PM RJ-45 Ports LEDs PortBehavior and Description 1• Green Steady—1000M network connected. • Green Flashing—1000M network activity. • Amber Steady—100M network connected. • Amber Flashing—100M network activity. • OFF—No network connected. 2• Green Steady—1000M network connected. • Green Flashing—1000M network activity. • Amber Steady—100M network connected. • Amber Flashing—100M network activity. • OFF—No network connected. 3• Green Steady—1000M network connected. • Green Flashing—1000M network activity. • Amber Steady—100M network connected. • Amber Flashing—100M network activity. • OFF—No network connect…

Text truncated - open the document above for the full version.

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Confidentiality Request Date: December 28, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: TVE-111M01 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Descriptions The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Power of Attorney Date: December 27, 2020 FCC ID: TVE-111M01 To whom it may concern, We, the undersigned, Fortinet, Inc., hereby authorize Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, and the signing of documents relating to these matters. Any documents submitted by Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch within the scope of this authorization shall have the same effects as if submitted by Fortinet, Inc., provided, in all events, (a) Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch has acted legally, in good faith and properly in furtherance of obtaining the FCC approval of our products, (b) the only documents submitted by Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch on our behalf have been reviewed and approved by an authorized representative of Fortinet, Inc. in advance of Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch submittal, and (c) Keny Xu of SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch provides to the Fortinet Legal team a copy of the document submitted at the same time as submittal. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, ________________________ Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Fortinet, Inc. Address 899 Kifer Road, Sunnyvale, CA 94086 USA Grantee Code TVE FCC ID TVE-111M01 Authorized Contact Name Andrew Ji Contact Email [email protected] Contact Phone 408-235-7700 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the A, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1 g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2/27/2021 Print Name: Andrew Ji Title: Sr. Director of Operations *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM2011011885CR FCC ID: TVE-111M01 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

Label Location

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZEM2011011885CR FCC ID: TVE-111M01 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188504 Page: 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Evaluation Report Application No.: SZEM2011011885CR Applicant: Fortinet Inc. Address of Applicant: 899 Kifer Road, Sunnyvale CA 94086, USA Manufacturer: Fortinet Inc. Address of Manufacturer: 899 Kifer Road, Sunnyvale CA 94086, USA Equipment Under Test (EUT): Product Name: Secure Network Extension Device Model No.: FortiExtender 200Fxxxxxx, FORTIEXTENDER-200Fxxxxxx, FEX-200Fxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only)   Please refer to section 4.1 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FORTINET FCC ID: TVE-111M01 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 Date of Receipt: 2020-11-23 Date of Test: 2020-11-30 to 2020-12-30 Date of Issue: 2020-12-31 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188504 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-12-31 Original Authorized for issue by: Damon Su/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188504 Page: 3 of 7 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION .................................................................................................................................... 5 4.3 TEST FACILITY ...................................................................................................................................... 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ........................................................................................ 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 5 5 RF EXPOSURE EVALUATION ............................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................. 6 5.1.1 Limits .......................................................................................................................................... 6 5.1.2 Test Procedure ........................................................................................................................... 6 4.1.3 EUT RF EXPOSURE EVALUATION ........................................................................................................... 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188504 Page: 4 of 7 4 General Information 4.1 General Description of EUT Rated voltage: DC 12V Test voltage: AC 120V Power adapter: Model No.:WB-12G12R Input: 100-240V 50/60Hz, 0.3A Output: 12V 1A. For BT Operation Frequency: 2402MHz to 2480MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Bluetooth Version: V5.0 Dual mode Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: PIFA Antenna Antenna Gain: 2.38dBi For BLE Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Dual mode Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PIFA Antenna Antenna Gain: 2.38dBi Declaration of EUT Family Grouping: Model No.: FortiExtender 200Fxxxxxx, FORTIEXTENDER-200Fxxxxxx, FEX-200Fxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) Only the model FEX-200F was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model names, software(the software Software does not affect RF performance) and marketing purposes. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188504 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188502 Page: 1 of 79 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2011011885CR Applicant: Fortinet Inc. Address of Applicant: 899 Kifer Road, Sunnyvale CA 94086, USA Manufacturer: Fortinet Inc. Address of Manufacturer: 899 Kifer Road, Sunnyvale CA 94086, USA Equipment Under Test (EUT): EUT Name: Secure Network Extension Device Model No.: FortiExtender 200Fxxxxxx, FORTIEXTENDER-200Fxxxxxx, FEX-200Fxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only)   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FORTINET FCC ID: TVE-111M01 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-11-23 Date of Test: 2020-11-30 to 2020-12-30 Date of Issue: 2020-12-31 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188502 Page: 2 of 79 Revision Record Version Chapter Date Modifier Remark 01 2020-12-31 Original Authorized for issue by: Damon Su/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188502 Page: 3 of 79 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Declaration of EUT Family Grouping: Model No.: FortiExtender 200Fxxxxxx, FORTIEXTENDER-200Fxxxxxx, FEX-200Fxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) Only the model FEX-200F was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model names, software(the software Software does not affect RF performance) and marketing purposes. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101188502 Page: 4 of 79 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 7 4.4 TEST LOCATION ............................................................................................................................. 8 4.5 TEST FACILITY ............................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................13 6.1 ANTENNA REQUIREMENT ................................................................................................................13 6.1.1 Test Requirement: ....................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2011011885CR FCC ID: TVE-111M01 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions