TVE-121203Secured Wireless Access Point

FortiAP 24D QuickStart Guide December 02, 2014 20-521-254742-20141202 Copyright© 2014 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations,and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. QuickStart Guide Register for Support Register your Fortinet product to receive: • Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di: • Supporto Tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce Debe registrar el producto para recibir: • Apoyo técnico • Nuevas funcionalidades del producto • Protección contra ataques 登録のお願い 本日、フォーティネット製品の登録をしてください。 登録すると次のメリットがあります。 テクニカルサポート • 新機能の追加 • 新しい脅威への防御 请马上注册 您的飞塔产品 您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护 https://support.fortinet.com Toll free: 1 866 648 4638 Phone: 1 408 486 7899 Fax: 1 408 235 7737 Email: [email protected] Box Includes 4 Ethernet Cable Wall Mount Kit FortiAP 24D QuickStart Guide QuickStart Guide FortiAP 24D Before You Begin Write down details that you may need from your network administrator or ISP. 5 DSL PPPoE Username Password Cable Modem DHCP It is normal to not require a hostname, but your ISP may require it. Hostname Static IP address IP Address Subnet Mask Default Gateway Primary/Secondary DNS 6 7 Mounting 1 M3x16L Screw Anchor 1. Select an appropriate location and mark the location on the wall where the anchors will be located. 2. Insert the anchors provided in the wall mount kit into the wall in the marked locations. If necessary, drill holes into the wall with an appropriately sized drill bit prior to inserting the anchors. 3. Screw the provided M3x16L screws into the two anchors, leaving enough of the screws exposed to ensure that the unit can be mounted on them. 4. Mount the FortiAP unit onto the screws and ensure that it is mounted securily. You can now proceed with connecting your FortiAP unit. 8 Basic Connections 2 Connect your FortiAP device to a FortiGate controller or an Internet connection. If you are using Power over Ethernet (PoE), ensure that the cable is connected to an applicable port on your FortiGate device or PoE injector. Optionally, connect your device to a power outlet using the optional power adapter. Caution: Adequate grounding must be provided to the FortiAP unit and the PoE injector, in compliance with your local electrical code or regulations. Warning: This device complies with IEEE 802.3af PoE specification. Do not use any PoE injectors that are not IEEE 802.3af compliant as they may damage your device. Optional Power Connection WAN Port Internet 9 FortiAP Setup 3 Cloud provisioning with FortiCloud FortiGate secured on local network OR A B Ethernet Port FortiAPFortiGate FortiCloud Internet FortiAP FortiAP Setup Video http://video.fortinet.com/video/92/basic-fortiap-setup WAN Port WAN Port 10 1. Visit http://www.forticloud.com and sign in or create a new account. 2. Click the “Add Device” link, enter the unique FortiCloud key located on your FortiAP device, then click Submit. 3. Deploy the FortiAP to an existing AP network, or create a new AP network, then click Submit. 4. Follow the prompts to associate the FortiAP device to an SSID. 5. Connect your FortiAP to an Internet connection. This can be a modem or another source of Internet connectivity. The FortiAP will self-configure. FortiCloud A 11 Deployment through a FortiGate B If your FortiGate is on the same network as your FortiAP: 1. Preauthorize your FortiAP device using your FortiGate. If you are not familiar with deploying a FortiAP using your FortiGate, refer to the “Access Point Deployment” section of the Deploying Wireless Networks Guide found at http://docs.fortinet.com. 2. Plug your FortiAP into your local Ethernet connection. The FortiAP will self-configure. Or 1. Instead of preauthorizing, you can authorize your FortiAP via the FortiGate after you have connected the FortiAP to your local Ethernet. 2. Within two minutes of connecting the FortiAP to your FortiGate, the device will appear on the Managed FortiAP page in the Web-based Manager: authorize and assign a profile to the device. If your FortiGate is not on the same network as your FortiAP: 1. Log in to the FortiAP directly (IP address: 192.168.1.2) with username admin and no password, and specify the IP address of the controlling FortiGate. 2. Connect to the FortiAP via the CLI using the instructions in the “Connecting to FortiAP CLI” section of the Depl…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Label location

Page 3 Page 4 Page 5 Page 6 Page 7

Report No.: SA140822C02 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA140822C02 MODEL NO.: FortiAP-24Dxxxxxx, FORTIAP-24Dxxxxxx, FAP-24Dxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) FCC ID: TVE-121203 RECEIVED: Aug. 22, 2014 TESTED: Aug. 28 ~ Sep. 18, 2014 ISSUED: Sep. 25, 2014 APPLICANT: Fortinet lnc. ADDRESS: 899 Kifer Road Sunnyvale, CA 94086 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA140822C02 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 5 Report No.: SA140822C02 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140822C02 Original release. Sep. 25, 2014 Report No.: SA140822C02 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Secured Wireless Access Point MODEL: FortiAP-24Dxxxxxx, FORTIAP-24Dxxxxxx, FAP-24Dxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) BRAND: Fortinet lnc. APPLICANT: Fortinet lnc. TESTED: Aug. 28 ~ Sep. 18, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: FORTIAP-24D) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Sep. 25, 2014 Pettie Chen / Senior Specialist APPROVED BY : , DATE : Sep. 25, 2014 Ken Liu / Senior Manager Report No.: SA140822C02 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 24.90 5.64 20 0.225 1 5180-5240 19.96 8.25 20 0.132 1 5745-5825 15.91 8.25 20 0.052 1 NOTE: 2.4GHz Band: Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /2]= 5.64dBi 5.0GHz Band: Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /2]= 8.25dBi *The 2.4 and 5GHz cannot transmit simultaneously.

Report No.: RF140822C02 1 of 63 Report Format Version 5.2.0 FCC TEST REPORT REPORT NO.: RF140822C02 MODEL NO.: FORTIAP-24Dxxxxxx ( where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) (Refer to Item 3.1 for more detail) FCC ID: TVE-121203 RECEIVED: Aug. 22, 2014 TESTED: Aug. 28 ~ Sep. 18, 2014 ISSUED: Sep. 25, 2014 APPLICANT: Fortinet lnc. ADDRESS: 899 Kifer Road Sunnyvale, CA 94086 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140822C02 2 of 63 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................................. 10 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 12 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 13 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 16 4. TEST TYPES AND RESULTS ..................................................................................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 17 4.1.2 TEST INSTRUMENTS ................................................................................................................. 18 4.1.3 TEST PROCEDURES ................................................................................................................. 19 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 19 4.1.5 TEST SETUP ............................................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 21 4.1.7 TEST RESULTS .......................................................................................................................... 22 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 36 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 36 4.2.2 TEST INSTRUMENTS ................................................................................................................. 36 4.2.3 TEST PROCEDURES ................................................................................................................. 37 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 37 4.2.5 TEST SETUP ............................................................................................................................... 37 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 37 4.2.7 TEST RESULTS .......................................................................................................................... 38 4.3 6dB BANDWIDTH MEASUREMENT ........................…

Text truncated - open the document above for the full version.

Report No.: RF140822C02-1 1 of 63 Report Format Version 5.2.0 FCC TEST REPORT (15.407) REPORT NO.: RF140822C02-1 MODEL NO.: FORTIAP-24Dxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software changes or marketing purposes only) (Refer to Item 3.1 for more detail) FCC ID: TVE-121203 RECEIVED: Aug. 22, 2014 TESTED: Aug. 28 ~ Sep. 18, 2014 ISSUED: Sep. 25, 2014 APPLICANT: Fortinet lnc. ADDRESS: 899 Kifer Road Sunnyvale, CA 94086 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140822C02-1 2 of 63 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ......................................................................................................... 4 1. CERTIFICATION ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................................ 6 2.1 MEASUREMENT UNCERTAINTY ...................................................................................... 6 3. GENERAL INFORMATION ..................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................................... 7 3.2 DESCRIPTION OF TEST MODES ..................................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................... 10 3.3 DUTY CYCLE OF TEST SIGNAL ..................................................................................... 12 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................................. 13 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST .............................................................. 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................. 16 4. TEST TYPES AND RESULTS .............................................................................................. 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................ 17 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .................... 17 4.1.3 TEST INSTRUMENTS ...................................................................................................... 18 4.1.4 TEST PROCEDURES ....................................................................................................... 19 4.1.5 DEVIATION FROM TEST STANDARD ............................................................................. 19 4.1.6 TEST SETUP .................................................................................................................... 20 4.1.7 EUT OPERATING CONDITION ........................................................................................ 21 4.1.8 TEST RESULTS ................................................................................................................ 22 4.2 CONDUCTED EMISSION MEASUREMENT ................................................................... 40 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................. 40 4.2.2 TEST INSTRUMENTS ...................................................................................................... 40 4.2.3 TEST PROCEDURES ....................................................................................................... 41 4.2.4 DEVIATION FROM TEST STANDARD ............................................................................. 41 4.2.5 TEST SETUP .................................................................................................................... 41 4.2.6 EUT OPERATING CONDITIONS...................................................................................... 41 4.2.7 TEST RESULTS ................................................................................................................ 42 4.3 TRANSMIT POWER MEASUREMENT ............................................................................ 46 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT .......................................................... 46 4.3.2 TEST SETUP .........…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Test Mode A) 2 CONDUCTED EMISSION TEST (Test Mode B) 3 RADIATED EMISSION TEST (2.4GHz Band: Test Mode A) 4 RADIATED EMISSION TEST (2.4GHz Band: Test Mode B) 5 RADIATED EMISSION TEST (5GHz Band: Test Mode A) 6 RADIATED EMISSION TEST (5GHz Band: Test Mode B)