TVE-240201Network Security Gateway

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 909 Kifer Road Sunnyvale, CA 94086 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 23, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Fortinet Inc. (“the applicant”) certifies that the equipment FCC ID: TVE-240201 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Fortinet Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 909 Kifer Road Sunnyvale, CA 94086 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [ Fortinet Inc., Grantee Code TVE] (“the applicant”) certifies that, as of the date of the filing of application, [Fortinet, Inc.] (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information for the designated agent is: Company Name: Fortinet, Inc. Physical U.S. address: 909 Kifer Road, Sunnyvale, CA 94086, United States Email: [email protected] Telephone number: 1 (408) 235-7700 FRN: 0014392971 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely yours, Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Andrew Ji Name: Title: Sr. Director Operations Title: Email: [email protected] Email: Date: July 23, 2024 Date:

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 909 Kifer Road Sunnyvale, CA 94086 Request for Confidential Treatment Date: July 23, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidential Treatment – Application for Equipment Authorization (FCC ID: TVE-240201) To Whom It May Concern: Fortinet, Inc. (“Fortinet”) hereby respectfully requests that the Federal Communications Commission (“FCC”) withhold from public inspection and grant long term confidential treatment pursuant to 47 CFR §§ 0.457 and 0.459 to the information listed below and accompanying the Application for Equipment Authorization referenced above.  Schematics  Block Diagrams  Operational Descriptions The above-listed materials contain Fortinet trade secrets, and proprietary information not customarily released to the public and treated as confidential by Fortinet. Fortinet has invested significant time and resources in the research, design, and development of the product(s) and materials described above. The public disclosure of this information could therefore result in substantial competitive harm to Fortinet, as well as result in the provision of unjustified benefits to its competitors. We understand that pursuant to 47 CFR § 0.457, disclosure of this Application and the above-listed accompanying materials will not be made. Fortinet wishes to clarify that in no event shall the FCC nor any of its direct or indirect organizations, access Fortinet source code or reverse engineer any Fortinet products. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued:  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all test reports, FCC ID label cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340, Fax: 408-235-7737 E-mail: [email protected]

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 909 Kifer Road Sunnyvale, CA 94086 Power of Attorney July 23, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Power of Attorney for Application for Equipment Authorization (FCC ID: TVE-240201) To whom it may concern: We, the undersigned, Fortinet, Inc. (“Fortinet”), hereby authorize Sporton International Inc. to act on our behalf as our agent, in the following matters exclusively related to authorization of Fortinet’s products by the Federal Communications Commission (the “FCC”): Application for Equipment Authorization submission, including supporting materials and related correspondence. Any document(s) submitted by Sporton International Inc. within the scope of this authorization shall have the same effect as if submitted by Fortinet, provided, in all events, (a) Sporton International Inc. has acted legally, in good faith and properly in furtherance of obtaining authorization of Fortinet’s products by the FCC, (b) the only documents submitted by Sporton International Inc. on Fortinet’s behalf have been reviewed and approved, in advance and in writing, by an authorized representative of Fortinet with requisite authority, and in advance of submission of such documents to the FCC by Sporton International Inc., and (c) Sporton International Inc. provides a copy of the document(s) submitted to the Fortinet legal team at [email protected] at the same time such documents are submitted to the FCC. This Power of Attorney is effective as of the date of signature hereof and shall remain in effect until December 31, 2024, unless revoked earlier in writing by Fortinet. Sporton International Inc. shall only exercise the powers granted herein under Fortinet’s express instructions. For the avoidance of doubt, any exercise of these powers shall be deemed null and void if performed in absence of or deviating from Fortinet’s instructions and/or in violation of the restrictions of this Power of Attorney, applicable laws and/or Fortinet’s policies. This Power of Attorney explicitly excludes the power to delegate Power of Attorney (sub-delegation). Should you have any questions regarding the Application for Equipment Authorization, please do not hesitate to contact Fortinet directly via the contact information provided below. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 909 Kifer Road Sunnyvale, CA 94086 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 30, 2024 Subject: Professional Installation Attestation FCC ID: TVE-240201 Product Name: Network Security Gateway To whom it may concern, We, the undersigned, hereby declare that the device will be distributed through a controlled distribution channel. This device is not intended for sale to the general public. Professional training and support is provided as part of authorized partner programs. If you have any questions regarding the authorization, please do not hesitate to contact us. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected]

Label back of thedevice

640.05703.0011 FWF-30G LBL Silver_39*24.2mm _640.00K0U.0043 1MCP00 Catherine 06/14/2024 Andreaus Liu Angie 1MCP00 CAN ICES-003 (B) / NMB-003 (B) FCC ID: TVE-240201 IC: 7280B-240201 M FWF-30G 12Vdc 2A 整合型安全閘道器 Model: FWF-30G FortiWiFi 30G Input : 12Vdc 2A 640.05703.0011 FWF-30G LBL Silver_39*24.2mm _640.00K0U.0043 1MCP00 Catherine 06/14/2024 Andreaus Liu Angie 1MCP00 CAN ICES-003 (B) / NMB-003 (B) FCC ID: TVE-240201 IC: 7280B-240201 M FWF-31G 12Vdc 2A 整合型安全閘道器 Model: FWF-31G FortiWiFi 31G Input : 12Vdc 2A

TEL : 886-3-327-3456 Page : 1 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 RF EXPOSURE EVALUATION REPORT FCC ID : TVE-240201 Equipment : Network Security Gateway Brand Name : FORTINET Model Name : FortiWiFi 30Gxxxxxxxxxx, FORTIWIFI 30Gxxxxxxxxxx, FWF-30Gxxxxxxxxxx FortiWiFi 31Gxxxxxxxxxx, FORTIWIFI 31Gxxxxxxxxxx, FWF-31Gxxxxxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software purposes or marketing purposes only) Applicant : Fortinet Inc. 909 KIFER RD SUNNYVALE CA 94086 UNITED STATES Manufacturer : Fortinet Inc. 909 KIFER RD SUNNYVALE CA 94086 UNITED STATES Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 4 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 5 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 6 4.1. Standalone Power Density Calculation ............................................................................................. 6 4.2. Collocated Power Density Calculation ............................................................................................... 6 TEL : 886-3-327-3456 Page : 3 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 History of this test report Report No. Version Description Issued Date FA450904 Rev. 01 Initial issue of report Jul. 30, 2024 TEL : 886-3-327-3456 Page : 4 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Network Security Gateway Brand Name FORTINET Model Name FortiWiFi 30Gxxxxxxxxxx, FORTIWIFI 30Gxxxxxxxxxx, FWF-30Gxxxxxxxxxx FortiWiFi 31Gxxxxxxxxxx, FORTIWIFI 31Gxxxxxxxxxx, FWF-31Gxxxxxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software purposes or marketing purposes only) FCC ID TVE-240201 Wireless Technology and Frequency Range WLAN 2.4 GHz Band: 2400 MHz ~ 2483.5 MHz WLAN 5.2 GHz Band: 5150 MHz ~ 5250 MHz WLAN 5.3 GHz Band: 5250 MHz ~ 5350 MHz WLAN 5.6 GHz Band: 5470 MHz ~ 5725 MHz WLAN 5.8 GHz Band: 5725 MHz ~ 5850 MHz Mode WLAN: 802.11a/b/g/n/ac/ax HT20/HT40/VHT20/VHT40/VHT80/HE20/HE40/HE80 EUT Stage Production Unit Reviewed by: Jason Wang Report Producer: Carlie Tsai 2. Maximum RF average output power among production units Band Maximum Average Power (dBm) Ant 1 Ant 2 Ant 1+2 2.4GHz WLAN 22.5 22.0 25.0 5GHz WLAN 26.0 25.5 28.5 TEL : 886-3-327-3456 Page : 5 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 6 of 6 FAX : 886-3-328-4978 Issued Date : Jul. 30, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA450904 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) Power Density / Limit WLAN2.4GHz Band Ant 1+2 3.24 25.00 28.24 0.67 666.81 0.133 1.000 0.133 WLAN5GHz Band Ant 1+2 3.27 28.50 31.77 1.50 1503.14 0.299 1.000 0.299 4.2. Collocated Power Density Calculation WLAN 2.4GHz Band Ant 1+2 Power Density / Limit WLAN 5GHz Band Ant 1+2 Power Density / Limit Σ(Power Density / Limit) of WLAN 2.4GHz + WLAN 5GHz 0.133 0.299 0.432 Note: 1. Σ(Power Density / Limit): This is a summation of [(power density for each transmitter/antenna included in the simultaneous transmission)/ (corresponding MPE limit)], WLAN 2.4GHz + WLAN 5GHz. 2. Considering the WLAN transmitter of the EIRP performance listed in the table above, the aggregated (power density /limit) is smaller than 1, and MPE of 2 collocated transmitters is compliant. Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

Page 1 of 27 WIESON TECHNOLOGIES CO., LTD. WIESON 3D CHAMBER TEST REPORT Customer: 緯創 Project Name: LTE 4G+5G WIESON P/N: ARY118-0047-001-00 Antenna Type: Dipole Version No. : 02 Contact Information: Tel:02-2647-1896 PM: Eison Chou [email protected] Ext.6377 Engineer: Wippen @wieson.com Ext.6712 Page 2 of 27 WIESON TECHNOLOGIES CO., LTD. INDEX. I. ELECTRONIC CHARACTERISTICS ..................................................................................... 3 II. Summary： ............................................................................................................................... 4 III. S-Parameter Measurement： .................................................................................................... 4 IV. Antenna Photos&Drawing： .................................................................................................... 5 V. S-Parameter Measurement Result： ......................................................................................... 6 VI. S-Parameter Measurement Result： ......................................................................................... 7 VII. The Test Information Anechoic Chamber ................................................................................. 8 VIII. Antenna Measurement Photo .................................................................................................. 12 IX. Antenna Measurement Result ................................................................................................. 13 X. 3D Radiation Pattern of LTE Antenna.................................................................................. 17 Revision History Revision Date Engineer Description 01 2020/10/22 Wen NEW RELEASE 01 2024/05/22 Aiden Update No part of the information shown of this document may be used in any way without office stamp or written consent of WIESON TECHNOLOGIES CO., LTD. Page 3 of 27 WIESON TECHNOLOGIES CO., LTD. I. ELECTRONIC CHARACTERISTICS Item Specification Specification Specification Specification Operating Frequency(GHz) 0.617~0.960 1.452~2.690 3.3-5.850 5.925-7.125 Bandwidth 343 MHz (Min.) 1238 MHz (Min.) 2625 MHz (Min.) 1200 MHz (Min.) Return Loss -6 dB (Max) -6 dB (Max) -6 dB (Max) -6 dB (Max) Polarization Linear Linear Linear Linear Azimuth Bandwidth Omni-directional Omni-directional Omni-directional Omni-directional Peak Gain 1.62dBi(Max) 3.72dBi(Max) 3.2dBi(Max) 3.09dBi(Max) Impedance 50Ω 50Ω 50Ω 50Ω Material PCB PCB PCB PCB Maximum Power 1W 1W 1W 1W V.S.W.R 3 : 1 3 : 1 3 : 1 3 : 1 Radiation Omni directional Omni directional Omni directional Omni directional Efficiency >45% >43% >45% >35% Connector SMA SMA SMA SMA Cable type OD:1.37 OD:1.37 OD:1.37 OD:1.37 Operating Temperature -10~60°C -10~60°C -10~60°C -10~60°C Storage temp -10~70°C -10~70°C -10~70°C -10~70°C Page 4 of 27 WIESON TECHNOLOGIES CO., LTD. II. Summary： This report to account for the measurement setup and result of the Antenna. The measurement setup includes s-parameter, pattern, and gain measurement. The measured data for Antenna are presented and analysis. III. S-Parameter Measurement： A. Reflection coefficient : (a) Instrument：Network Analyzer. (b) Setup： (1) Calibrate the Network Analyzer by one port calibration using O.S.L. calibration kits. (2) Connect the antenna under test to the Network Analyzer. (3) Measure the S11(reflection coefficient) shown in Fig. 1. (4) Generally, the S11 is less than –10dB to ensure the 90% power into antenna and only less than 10% power back to system. Fig.1 Antenna measured in Network Analyzer Page 6 of 27 WIESON TECHNOLOGIES CO., LTD. V. S-Parameter Measurement Result： Return Loss 頻率 (MHz) 617 960 1452 1710 2690 3300 4200 4400 5925 6525 7125 S11(dB) -21.9 -6.7 -9.5 -18 -11.1 -14.7 -15.7 -16.2 -6.9 -6.1 -7.1 Page 7 of 27 WIESON TECHNOLOGIES CO., LTD. VI. S-Parameter Measurement Result： VSWR 頻率 (MHz) 617 960 1452 1710 2690 3300 4200 4400 5925 6525 7125 VSWR 1.17 2.7 2 1.28 1.76 1.45 1.39 1.36 2.61 2.92 2.45 Page 8 of 27 WIESON TECHNOLOGIES CO., LTD. VII. The Test Information Anechoic Chamber A. Scope This statement of work defines the requirements of a far-field antenna measurement range, which includes (1) One 560 cm (W) x 325 cm (H) x 620 cm (L) Antenna Measurement Anechoic Chamber, detailed requirements refer section B . (2) One Far-field Antenna Measurement System with spinning linear CP measurement capabilities, detailed requirement refer section E & F . (3) One broad-band transmitted antenna, detailed requirements refer section G . B. Antenna Measurement Anechoic Chamber Fully anechoic chamber with dimension 560 cm in width, 325 cm in height and 620 cm in length. The quiet zone of this Chamber shall be greater than Page 9 of 27 WIESON TECHNOLOGIES CO., LTD. 60 cm @ 400MHz~900MHz, 43 cm @2.4 GHz, 31 cm @5.8 GHz,. Contractor should be aware of this anechoic chamber is going to be used for performing far-filed antenna measurement. C. Electrical specifications Frequency Range: 400 MHz to 6 GHz, Quiet zone size: >60 cm @ 400MHz~900MHz, >43 cm @2.4 GHz, >31 cm @5.8 GHz. Quiet zone ripple: < +/- 1.5 dB @500(400)MHz~800MHz, < +/-0.75 dB @800MHz~1.5GHz, < +/- 0.5 dB @1.5GHz~6.0GHz Field Probing Frequency Peak-to-Peak Amplitude Taper (Within specified Quiet Zone Area) Quiet Zone Size (cm) Compliant 0.9 GHz < 0.75 dB 60 Yes 1.575 GHz < 0.5 dB 43 Yes 1.8 GHz < 0.5 dB 43 Yes 2.4 GHz < 0.5 dB 43 Yes 5.8 GHz < 0.5 dB 31 Yes Page 10 of 27 WIESON TECHNOLOGIES CO., LTD. D. Absorbers We shall design and install proper absorbers on the inner walls of the chamber to guarantee the electrical specifications. However, the absorbers height shall be no less than 24" which enables the space in the chamber to be around 438 cm (W) x 203 cm (H) x 513 cm (L). All the absorber used shall meet NRL-8093 fire retardant regulations E. Far-field Antenna Measurement System We shall supply all the hardware and software which are capable of characterizing antenna radiation patterns from 30 KHz to 6 GHz using the exist…

Text truncated - open the document above for the full version.

TEL : 886-3-327-0868 Page Number : 1 of 28 FAX : 886-3-327-0855 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FR15CWL AC MA Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR450904A FCC RADIO TEST REPORT FCC ID : TVE-240201 Equipment : Network Security Gateway Brand Name : FORTINET Model Name : FortiWiFi 30Gxxxxxxxxxx, FORTIWIFI 30Gxxxxxxxxxx, FWF-30Gxxxxxxxxxx FortiWiFi 31Gxxxxxxxxxx, FORTIWIFI 31Gxxxxxxxxxx, FWF-31Gxxxxxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-“, or blank for software purposes or marketing purposes only) Applicant : Fortinet Inc. 909 KIFER RD SUNNYVALE CA 94086 UNITED STATES Manufacturer : Fortinet Inc. 909 KIFER RD SUNNYVALE CA 94086 UNITED STATES Standard : FCC PART 15 Subpart C §15.247 The product was received on May 17, 2024 and testing was performed from Jun. 12, 2024 to Jul. 11, 2024. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 28 FAX : 886-3-327-0855 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FR15CWL AC MA Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR450904A Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 7 1.3 Testing Location ................................................................................................................................ 8 1.4 Applicable Standards ......................................................................................................................... 8 2 Test Configuration of Equipment Under Test ......................................................................................... 9 2.1 Carrier Frequency and Channel ........................................................................................................ 9 2.2 Test Mode ........................................................................................................................................ 10 2.3 Connection Diagram of Test System ............................................................................................... 11 2.4 Support Unit used in test configuration and system ........................................................................ 11 2.5 EUT Operation Test Setup .............................................................................................................. 12 2.6 Measurement Results Explanation Example ................................................................................... 12 3 Test Result ................................................................................................................................................ 13 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 13 3.2 Output Power Measurement ............................................................................................................ 14 3.3 Power Spectral Density Measurement ............................................................................................ 15 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 17 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 18 3.6 AC Conducted Emission Measurement........................................................................................... 23 3.7 Antenna Requirements .................................................................................................................... 25 4 List of Measuring Equipment .................................................................................................................. 26 5 Measurement Uncertainty ....................................................................................................................... 28 Appendix A. Conducted Test Results Appendix B. AC Conducted Emission Test Result Appendix C. Radiated Spurious Emission Appendix D. Radiated Spurious Emission Plots Appendix E. Duty Cycle Plots Appendix F. Setup Photographs TEL : 886-3-327-0868 Page Number : 3 of 28 FAX : 886-3-327-0855 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FR15CWL AC MA Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR450904A History of this test report Report No. Version Description Issue Date FR450904A 01 Initial issue of report Jul. 31, 2024 FR450904A 02 Revise Antenna Requirements This report is an updated version, replacing the report issued on Jul. 31, 2024. Aug. 07, 2024 TEL : 886-3-327-0868 Page Number : 4 of 28 FAX : 886-3-327-0855 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FR15CWL AC MA Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR450904A Summary of Test R…

Text truncated - open the document above for the full version.

TEL : 886-3-327-0868 Page Number : A2-26 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11ax HE40_FullRU Test Channel : 03 TEL : 886-3-327-0868 Page Number : A2-27 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level Middle Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11ax HE40_FullRU Test Channel : 06 TEL : 886-3-327-0868 Page Number : A2-28 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11ax HE40_FullRU Test Channel : 09 TEL : 886-3-327-0868 Page Number : A2-29 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A Number of TX = 2, Ant. 2 (Measured) 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11b Test Channel : 01 TEL : 886-3-327-0868 Page Number : A2-30 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level Middle Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11b Test Channel : 06 TEL : 886-3-327-0868 Page Number : A2-31 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11b Test Channel : 09 TEL : 886-3-327-0868 Page Number : A2-32 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11b Test Channel : 10 TEL : 886-3-327-0868 Page Number : A2-33 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11b Test Channel : 11 TEL : 886-3-327-0868 Page Number : A2-34 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level Low Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11g Test Channel : 01 TEL : 886-3-327-0868 Page Number : A2-35 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level Middle Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11g Test Channel : 06 TEL : 886-3-327-0868 Page Number : A2-36 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR450904A 100kHz PSD reference Level High Channel Plot Spurious Emission 30MHz~1GHz Spurious Emission 1GHz~26.5GHz Test Mode : 802.11g Test Channel : 10 TEL : 886-3-327-0868 Page Number : A2-37 of 50 FAX : 886-3-327-0855 FCC RADIO TEST REPORT…

Text truncated - open the document above for the full version.