TVE-24100012Wireless Access Point

QuickStart Guide FortiAP-C220C, FAP-C220C FortiAP-C225C, FAP-C225C FortiAP-C220SC, FAP-C220SC FortiAP-C225SC, FAP-C225SC July 09, 2015 Copyright© 2015 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations,and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. QuickStart Guide Register for Support Register your Fortinet product to receive: • Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di: • Supporto Tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce Debe registrar el producto para recibir: • Apoyo técnico • Nuevas funcionalidades del producto • Protección contra ataques 登録のお願い 本日、フォーティネット製品の登録をしてください。 登録すると次のメリットがあります。 テクニカルサポート • 新機能の追加 • 新しい脅威への防御 请马上注册 您的飞塔产品 您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护 https://support.fortinet.com Toll free: 1 866 648 4638 Phone: 1 408 486 7899 Fax: 1 408 235 7737 Email: [email protected] Box Includes 6 Mounting Bracket FortiAP QuickStart Guide QuickStart Guide FortiAP device Wall/Ceiling Mounting Hardware Kit External Antennas (Models C225C and C225SC) QuickStart Guide Video http://video.fortinet.com/video/38/fortigate-and-fortiwifi-quick-start-guide-5-0 Before You Begin Write down details typically provided by your network administrator or ISP. 7 DHCP It is normal to not require a hostname, but your ISP might require it. Hostname Static IP address IP Address Subnet Mask Default Gateway Primary/Secondary DNS 8 Installation 1 The unit can be mounted on a desk or on a wall or ceiling using the provided wall/ceiling mounting hardware kit. F A P - C 2 2 5 C FortiAP-C225C / FAP-C225C and FortiAP-C225SC / FAP-C225SC have external antennas. Attach the antennas to the antenna mounts before you install the unit to a wall or ceiling. Note: FortiAP-C220C / FAP-C220C and FortiAP-C220SC / FAP-C220SC have internal antennas. This step is not applicable when installing those models. 9 To attach the unit to a wall or ceiling Before you begin: Select an appropriate location, mark the locations on the wall or ceiling where the anchors will be inserted, and then drill the mounting holes. 1. Insert the anchors into the mounting holes. 2. Use the screws to attach the mounting bracket to the anchors. 3. Mount the device on the mounted mounting bracket, then rotate it counterclockwise to secure it in place. 10 Basic Connections 2 Connect the FortiAP device to a FortiGate controller or an Internet connection. If you are using Power over Ethernet (PoE), ensure that the cable is connected to an applicable port on your FortiGate device or PoE injector. Optionally, connect the device to a power outlet using the optional power adapter. Optional Power Connection Ethernet Port Internet Caution: Adequate grounding must be provided to the FortiAP unit and the PoE injector, in compliance with your local electrical code or regulations. Warning: This device complies with IEEE 802.3af PoE specification. Do not use any PoE injectors that are not IEEE 802.3af compliant as they may damage your device. 11 FortiAP Setup 3 FortiAP Setup Video http://video.fortinet.com/video/92/basicfortiap-setup If FortiGate is on the same network as the FortiAP: 1. Use FortiGate to preauthorize the FortiAP device. 2. Refer to the “Access Point Deployment” section of the Deploying Wireless Networks Guide found at http://docs.fortinet.com. 3. Plug FortiAP into your local Ethernet connection. The FortiAP will self-configure. Or 1. Instead of preauthorizing, you can use FortiGate to authorize the FortiAP device after you have connected the FortiAP to the network. 2. Within two minutes of connecting the FortiAP to FortiGate, the device appears on the Managed FortiAP page in the Web-based Manager: authorize and assign a profile to the device. If FortiGate is not on the same network as the FortiAP: 1. Log into FortiAP directly (IP address: 192.168.1.2) with username admin and no password, and specify the IP address of the controlling FortiGate. 2. Connect to FortiAP via the CLI using the instructions in the “Connecting to FortiAP CLI” section of the Deploying Wireless Networks guide. 3. Specify the IP address of the controlling FortiGate: config capwap wtp acIpAddr 0.0.0.0 where 0.0.0.0 is the address of the FortiGate. 4. The FortiAP device connects to FortiGate, and then you can authorize the FortiAP. 12 Power Optional power adapter connection. 12V DC, 2A LAN/WAN RJ45 10/100/1000 Gigabit …

Text truncated - open the document above for the full version.

CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Wireless Access Point Model Name FORTIAP-C220Cxxxxxx; FAP-C220Cxxxxxx; FORTIAP-C225Cxxxxxx; FAP-C225Cxxxxxx Brand Name fortinet Applicant Fortinet, Inc. Address 899 Kifer Road, Sunnyvale, CA 94086 USA Standard(s) FCC Part 15, Subpart B: 2014 ANSI C63.4-2009 Report(s) BTL-FICE-1-1504C174 The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331

Project No.: 1504C174 Page 2 of 12 Project No.: 1504C174 Page 3 of 12

Project No.: 1504C174 Page 2 of 10 Project No.: 1504C174 Page 3 of 10 Project No.: 1504C174 Page 4 of 10

FCC ID: TVE-24100012 IC: 7280B-24100012 CAN ICES-3(B)/NMB-3(B) Indoor use only Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA. 94086 USA Input: 48Vdc(POE) or 12Vdc 2A Product of China FORTIAP-C220C FCC ID: TVE-24100012 IC: 7280B-24100012 CAN ICES-3(B)/NMB-3(B) Indoor use only Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA. 94086 USA Input: 48Vdc(POE) or 12Vdc 2A Product of China FAP-C220C

FCC ID: TVE-24100012 IC: 7280B-24100012 CAN ICES-3(B)/NMB-3(B) Indoor use only Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA. 94086 USA Input: 48Vdc(POE) or 12Vdc 2A Product of China FORTIAP-C225C FCC ID: TVE-24100012 IC: 7280B-24100012 CAN ICES-3(B)/NMB-3(B) Indoor use only Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA. 94086 USA Input: 48Vdc(POE) or 12Vdc 2A Product of China FAP-C225C

Project No.: 1504C174 Page 4 of 12 Project No.: 1504C174 Page 5 of 12 Project No.: 1504C174 Page 6 of 12 Project No.: 1504C174 Page 7 of 12 Project No.: 1504C174 Page 8 of 12 Project No.: 1504C174 Page 9 of 12 Project No.: 1504C174 Page 10 of 12 Project No.: 1504C174 Page 11 of 12 Project No.: 1504C174 Page 12 of 12

Project No.: 1504C174 Page 5 of 10 Project No.: 1504C174 Page 6 of 10 Project No.: 1504C174 Page 7 of 10 Project No.: 1504C174 Page 8 of 10 Project No.: 1504C174 Page 9 of 10 Project No.: 1504C174 Page 10 of 10

FCC RF EXPOSURE REPORT FCC ID: TVE-24100012 Project No. : 1504C174 Equipment : Wireless Access Point Model : FORTIAP-C220Cxxxxxx, FAP-C220Cxxxxxx, FORTIAP-C225Cxxxxxx, FAP-C225Cxxxxxx Applicant : Fortinet, Inc. Address : 899 Kifer Road, Sunnyvale, CA 94086 USA According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna 2.4G Internal antenna Ant. Brand P/N Antenna TypeConnectorGain (dBi) Note 1 RFPCA3806 17NNAB301 PCB N/A 3.00 2.4G 2 RFPCA3806 20NNAB301 PCB N/A 4.16 2.4G External antenna Ant. Brand P/N Antenna Type ConnectorGain (dBi) Note 1 RF21S00081ADipole R-SMA 4.30 2.4G 2 RF21S00081ADipole R-SMA 4.30 2.4G 5G Internal antenna Ant. Brand P/N Antenna TypeConnectorGain (dBi) Note 3 RFPCA1610 06NN5B301 PCB N/A 3.38 5G 4 RFPCA1610 13NN5B301 PCB N/A 3.08 5G External antenna Ant. Brand P/N Antenna Type ConnectorGain (dBi) Note 3 RF21S00081ADipole R-SMA 4.64 5G 4 RF21S00081ADipole R-SMA 4.64 5G TEST RESULTS 2.4G Internal antenna EUT： Wireless Access Point Model Name : FAP-C220C Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX B MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.16 2.6062 17.02 50.3501 0.026118631 Complies 4.16 2.6062 17.82 60.5341 0.031401501 Complies 4.16 2.6062 17.99 62.9506 0.032655051 Complies EUT： Wireless Access Point Model Name : FAP-C220C Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX G MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.16 2.6062 21.98 157.7611 0.081837131 Complies 4.16 2.6062 21.91 155.2387 0.080528641 Complies 4.16 2.6062 22.31 170.2159 0.088297901 Complies EUT： Wireless Access Point Model Name : FAP-C220C Temperature: 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N-20M MODE_ Total /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.16 2.6062 22.9 194.9845 0.101146391 Complies 4.16 2.6062 23.02 200.4472 0.103980131 Complies 4.16 2.6062 22.9 194.9845 0.101146391 Complies EUT： Wireless Access Point Model Name : FAP-C220C Temperature: 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N-40M MODE_ Total /CH03, CH06, CH09 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.16 2.6062 23.53 225.4239 0.116936571 Complies 4.16 2.6062 23.45 221.3095 0.114802241 Complies 4.16 2.6062 23.48 222.8435 0.115598011 Complies 2.4G External antenna EUT： Wireless Access Point Model Name : FAP-C225C Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX B MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.3 2.6915 17.97 62.6614 0.033569921 Complies 4.3 2.6915 17.89 61.5177 0.032957201 Complies 4.3 2.6915 17.69 58.7489 0.031473891 Complies EUT： Wireless Access Point Model Name : FAP-C225C Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX G MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.3 2.6915 22.29 169.4338 0.090771681 Complies 4.3 2.6915 22.15 164.0590 0.087892211 Complies 4.3 2.6915 22.31 170.2159 0.091190661 Complies EUT： Wireless Access Point Model Name : FAP-C225C Temperature: 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N-20M MODE_ Total /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.3 2.6915 22.83 191.8669 0.102789881 Complies 4.3 2.6915 22.96 197.6970 0.105913271 Complies 4.3 2.6915 20.88 122.4616 0.065607031 Complies EUT： Wireless Access Point Model Name : FAP-C225C Temperature: 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N-40M MODE_ Total /CH03, CH06, CH09 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 4.3 2.6915 23.4 218.7762 0.117206141 Complies 4.3 2.6915 23.58 228.0342 0.122166001 Complies 4.3 2.6915 23.58 228.0342 0.122166001 Complies Band 1 Internal antenna EUT： Wireless Access Point Model Name : FAP-C220C Temperature: 28 °C Relative Humidity: 60 % Test Voltage : AC 120V/60Hz Test Mode : TX A MODE /CH36, CH40, CH48 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 3.38 2.1777 14.97 31.4051 0.013612891 Complies 3.38 2.1777 14.95 31.2608 0.013550351 Complies 3.38 2.1777 15.02 31.7687 0.013770521 Complies EUT： Wireless Access Point Model Name : FAP-C220C Temperature: 28 °C Relative Humidity: 60 % Test Voltage : AC 120V/60Hz Test Mode : TX N-20M MODE_ Total /CH36, CH40, CH48 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Dens…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-2-1504C174 Page 1 of 54 6 FCC&IC Radio Test Report FCC ID: TVE-24100012  IC: 7280B-24100012  This report concerns (check one): Original Grant Class II Change Project No. : 1504C174 Equipment : Wireless Access Point Model Name for FCC : FORTIAP-C220Cxxxxxx; FAP-C220Cxxxxxx; FORTIAP-C225Cxxxxxx; FAP-C225Cxxxxxx Model Name for IC : FORTIAP-C220C; FAP-C220C; FORTIAP-C225C; FAP-C225C Applicant : Fortinet, Inc. Address: 899 Kifer Road, Sunnyvale, CA 94086 USA Date of Receipt : May 05. 2015 Date of Test : May 05. 2015~Jun.15.2015 Issued Date : Jun.16.2015 Tested by : BTL Inc. Testing Engineer : (David Mao) Technical Manager: (Leo Hung) Authorized Signatory: (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FICP-2-1504C174Page 2 of 54 6 Declaration BTLrepresents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measuremen t Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTLshall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTLissued reports. BTL’s report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FICP-2-1504C174Page 3 of 54 6 Table of ContentsPage 1 . CERTIFICATION7 2 . SUMMARY OF TEST RESULTS8 2.1 TEST FACILITY9 2.2 MEASUREMENT UNCERTAINTY9 3 . GENERAL INFORMATION10 3.1 GENERAL DESCRIPTION OF EUT10 3.2 DESCRIPTION OF TEST MODES 15 3.3 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING17 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 21 3.5 DESCRIPTION OF SUPPORT UNITS21 4 . EMC EMISSION TEST22 4.1 CONDUCTED EMISSION MEASUREMENT22 4.1.1 POWER LINE CONDUCTED EMISSION 22 4.1.2 TEST PROCEDURE22 4.1.3 DEVIATION FROM TEST STANDARD22 4.1.4 TEST SETUP23 4.1.5 EUT OPERATING CONDITIONS23 4.1.6 EUT TEST CONDITIONS23 4.1.7 TEST RESULTS23 4.2 RADIATED EMISSION MEASUREMENT24 4.2.1 RADIATED EMISSION LIMITS24 4.2.2 TEST PROCEDURE25 4.2.3 DEVIATION FROM TEST STANDARD25 4.2.4 TEST SETUP25 4.2.5 EUT OPERATING CONDITIONS26 4.2.6 EUT TEST CONDITIONS26 4.2.7 TEST RESULTS (9K TO 30MHz)27 4.2.8 TEST RESULTS (BETWEEN 30 TO 1000 MHz)27 4.2.9 TEST RESULTS (ABOVE 1000 MHz)27 5 . 26dB SPECTRUM BANDWIDTH28 5.1 APPLIED PROCEDURES / LIMIT28 5.1.1 TEST PROCEDURE28 5.1.2 DEVIATION FROM STANDARD28 5.1.3 TEST SETUP28 5.1.4 EUT OPERATION CONDITIONS28 5.1.5 EUT TEST CONDITIONS28 5.1.6 TEST RESULTS28 6 . MAXIMUM CONDUCTED OUTPUT POWER29 Report No.: BTL-FICP-2-1504C174Page 4 of 54 6 Table of ContentsPage 6.1 APPLIED PROCEDURES / LIMIT29 6.1.1 TEST PROCEDURE29 6.1.2 DEVIATION FROM STANDARD30 6.1.3 TEST SETUP30 6.1.4 EUT OPERATION CONDITIONS30 6.1.5 EUT TEST CONDITIONS30 6.1.6 TEST RESULTS30 7 . ANTENNA CONDUCTED SPURIOUS EMISSION31 7.1 APPLIED PROCEDURES / LIMIT31 7.1.1 TEST PROCEDURE31 7.1.2 DEVIATION FROM STANDARD31 7.1.3 TEST SETUP31 7.1.4 EUT OPERATION CONDITIONS31 7.1.5 EUT TEST CONDITIONS31 7.1.6 TEST RESULTS31 8 . POWER SPECTRAL DENSITY TEST32 8.1 APPLIED PROCEDURES / LIMIT32 8.1.1 TEST PROCEDURE32 8.1.1 DEVIATION FROM STANDARD33 8.1.2 TEST SETUP33 8.1.3 EUT OPERATION CONDITIONS33 8.1.4 EUT TEST CONDITIONS33 8.1.5 TEST RESULTS33 9 . FREQUENCY STABILITY MEASUREMENT34 9.1 APPLIED PROCEDURES / LIMIT34 9.1.1 TEST PROCEDURE34 9.1.2 DEVIATION FROM STANDARD34 9.1.3 TEST SETUP35 9.1.4 EUT OPERATION CONDITIONS35 9.1.5 EUT TEST CONDITIONS35 9.1.6 TEST RESULTS35 10 . MEASUREMENT INSTRUMENTS LIST36 ATTACHMENT A - CONDUCTED EMISSION46 ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ)51 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ)54 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ)79 ATTACHMENT E - BANDWIDTH316 ATTACHMENT F - MAXIMUM OUTPUT POWER361 Report No.: BTL-FICP-2-1504C174Page 5 of 54 6 Table of ContentsPage ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION396 ATTACHMENT H - POWER SPECTRAL DENSITY441 ATTACHMENT I - FREQUENCY STABILITY542 Report No.: BTL-FICP-2-1504C174Page 6 of 54 6 REPORT ISSUED HISTORY Issued No.DescriptionIssued Date BTL-FICP-2-1504C174Original Issue.Jun. 16, 2015 Report No.: BTL-FICP-2-1504C174Page 7 of 54 6 1. CERTIFICATION Equipment: Wireless Access Point Brand Name: fortinet Model Name for FCC: FORTIAP-C220Cxxxxxx; FAP-C220Cxxxxxx; FORTIAP-C225Cxxxxxx; FAP-C225Cxxxxxx Model Name for IC: FORTIAP-C220C; FAP-C220C; FORTIAP-C225C; FAP-C225C Applicant: Fortinet, Inc. Manufacturer: Shenzhen Netcore Industrial Ltd. Address: 4F&5F R&D BuildingˈOriental Cyberport, High-Tech Industrial Park, Nanshan, Shenzhen, China. Factory: Dongguan City Netcore Network Technology Co.,Ltd. Address: No.10-1,Sankeng Road,Qinghutou,Tangxia Town,Don guan City Date of Test: May 05. 2015~Jun.15.2015 Test Sample: ENGINEERING SAMPLE Standard(s): FCC Part15, Subpart E(15.407) / ANSI C63.10: 2013 FCC KDB 789033 D02 General UNII Test Procedures New Rules v01. Canada RSS-247 Issue 1 May 2015 RSS-GEN I…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-2-1504C174Page 401 of 546 Test Mode:UNII-1/TX N40 Mode_ANT 4 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 402 of 546 Test Mode:UNII-3/TX A Mode TX A Mode CH149 TX A Mode CH165 Report No.: BTL-FICP-2-1504C174Page 403 of 546 Test Mode:UNII-3/TX N20 Mode_ANT 3 TX HT20 mode CH149 TX HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 404 of 546 Test Mode:UNII-3/TX N20 Mode_ANT 4 TX HT20 mode CH149 X HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 405 of 546 Test Mode:UNII-3/TX N40 Mode_ANT 3 UNII-3/TX HT40 mode CH151 UNII-3/TX HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 406 of 546 Test Mode:UNII-3/TX N40 Mode_ANT 4 TX HT40 mode CH151 HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 407 of 546 Test Mode:UNII-1/TX AC20 Mode_ANT 3 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 408 of 546 Test Mode:UNII-1/TX AC20 Mode_ANT 4 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 409 of 546 Test Mode:UNII-1/TX AC40 Mode_ANT 3 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 410 of 546 Test Mode:UNII-1/TX AC40 Mode_ANT 4 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 411 of 54 6 Test Mode:UNII-1/TX AC80 Mode_ANT 3 TX mode CH42 Report No.: BTL-FICP-2-1504C174Page 412 of 546 Test Mode:UNII-1/TX AC80 Mode_ANT 4 TX mode CH42 Report No.: BTL-FICP-2-1504C174Page 413 of 546 Test Mode:UNII-3/TX AC20 Mode_ANT 3 TX AC HT20 mode CH149 TX AC HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 414 of 546 Test Mode:UNII-3/TX AC20 Mode_ANT 4 TX AC HT20 mode CH149 TX AC HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 415 of 546 Test Mode:UNII-3/TX AC40 Mode_ANT 3 TX AC HT40 mode CH151 TX AC HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 416 of 546 Test Mode:UNII-3/TX AC40 Mode_ANT 4 TX AC HT40 mode CH151 TX AC HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 417 of 546 Test Mode:UNII-3/TX AC80 Mode_ANT 3 TX AC HT80 mode CH155 Report No.: BTL-FICP-2-1504C174Page 418 of 546 Test Mode:UNII-3/TX AC80 Mode_ANT 4 TX AC HT80 mode CH155 Report No.: BTL-FICP-2-1504C174Page 419 of 546 External antenna Test Mode:UNII-1/TX A Mode TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 420 of 546 Test Mode:UNII-1/TX N20 Mode_ANT 3 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 421 of 546 Test Mode:UNII-1/TX N20 Mode_ANT 4 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 422 of 546 Test Mode:UNII-1/TX N40 Mode_ANT 3 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 423 of 546 Test Mode:UNII-1/TX N40 Mode_ANT 4 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 424 of 546 Test Mode:UNII-3/TX A Mode TX A Mode CH149 TX A Mode CH165 Report No.: BTL-FICP-2-1504C174Page 425 of 546 Test Mode:UNII-3/TX N20 Mode_ANT 3 TX HT20 mode CH149 TX HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 426 of 546 Test Mode:UNII-3/TX N20 Mode_ANT 4 TX HT20 mode CH149 X HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 427 of 546 Test Mode:UNII-3/TX N40 Mode_ANT 3 UNII-3/TX HT40 mode CH151 UNII-3/TX HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 428 of 546 Test Mode:UNII-3/TX N40 Mode_ANT 4 TX HT40 mode CH151 HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 429 of 546 Test Mode:UNII-1/TX AC20 Mode_ANT 3 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 430 of 546 Test Mode:UNII-1/TX AC20 Mode_ANT 4 TX mode CH36 TX mode CH48 Report No.: BTL-FICP-2-1504C174Page 431 of 546 Test Mode:UNII-1/TX AC40 Mode_ANT 3 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 432 of 546 Test Mode:UNII-1/TX AC40 Mode_ANT 4 TX mode CH38 TX mode CH46 Report No.: BTL-FICP-2-1504C174Page 433 of 546 Test Mode:UNII-1/TX AC80 Mode_ANT 3 TX mode CH42 Report No.: BTL-FICP-2-1504C174Page 434 of 546 Test Mode:UNII-1/TX AC80 Mode_ANT 4 TX mode CH42 Report No.: BTL-FICP-2-1504C174Page 435 of 546 Test Mode:UNII-3/TX AC20 Mode_ANT 3 TX AC HT20 mode CH149 TX AC HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 436 of 546 Test Mode:UNII-3/TX AC20 Mode_ANT 4 TX AC HT20 mode CH149 TX AC HT20 mode CH165 Report No.: BTL-FICP-2-1504C174Page 437 of 546 Test Mode:UNII-3/TX AC40 Mode_ANT 3 TX AC HT40 mode CH151 TX AC HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 438 of 546 Test Mode:UNII-3/TX AC40 Mode_ANT 4 TX AC HT40 mode CH151 TX AC HT40 mode CH159 Report No.: BTL-FICP-2-1504C174Page 439 of 546 Test Mode:UNII-3/TX AC80 Mode_ANT 3 TX AC HT80 mode CH155 Report No.: BTL-FICP-2-1504C174Page 440 of 546 Test Mode:UNII-3/TX AC80 Mode_ANT 4 TX AC HT80 mode CH155 Report No.: BTL-FICP-2-1504C174Page 441 of 546 ATTACHMENT H - POWER SPECTRAL DENSITY Report No.: BTL-FICP-2-1504C174Page 442 of 546 Internal antenna Test Mode: UNII-1/ TX A Mode_CH36/CH40/CH48 Channel Frequency (MHz) Power Density (dBm/MHz) Duty Factor (dBm/MHz) Power Density + Duty Factor (dBm/MHz) Limit (dBm/MHz) CH3651803.670.103.7717.00 CH4052003.400.103.5017.00 CH4852403.890.103.9917.00 Channel Frequency (MHz) Power Density + Duty Factor (dBm/MHz) Antenna Gain (dBi) EIRP Power Density (dBm/MHz) EIRP Limit (dBm/MHz) CH3651803.773.387.1510.00 CH4052003.503.386.8810.00 CH4852403.993.387.3710.00 CH36 Report No.: BTL-FICP-2-1504C174Page 443 of 546 CH40 CH48 Report No.: BTL-FICP-2-1504C174Page 444 of 546 Test Mode: UNII-1/TX N20 Mode_CH36/CH40/CH48_ANT 3 Channel Frequency (MHz) Power Density (dBm/MHz) Duty Factor (dBm/MHz) Power Density + Duty Factor (dBm/MHz) Limit (dBm/MHz) CH3651800.280.290.5717.00 CH4052000.510.290.8017.00 CH4852400.720.291.0117.00 Channel Frequency (MHz) Power Density + Duty Factor (dBm/MHz) Antenna Gain (dBi) EIRP Power Density (dBm/MHz) EIRP Limit (dBm/MHz) CH3651800.573.38 3.95 10.00 CH4052000.803.384.1810.00 CH4852401.013.384.3910.00 CH36 Report No.: BTL-FICP-2-1504C174Page 445 of 546 CH40 CH48 Report No.: BTL-FICP-2-1504C174Page 446 of 546 Test Mode: UNII-1/TX N20 Mode_CH36/CH40/CH48_ANT 4 Channel Frequency (MHz) Power Density (dBm/MHz) Duty Factor (dBm/MHz) Power Density + Duty Factor (dBm/MHz) Limit (dBm/MH…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-1-1504C174 Page 27 of 254 10. EUT TEST PHOTO Conducted Measurement Photos Internal antenna Report No.: BTL-FICP-1-1504C174 Page 28 of 254 Conducted Measurement Photos External antenna Report No.: BTL-FICP-1-1504C174 Page 29 of 254 Radiated Measurement Photos 9KHz to 30MHz Internal antenna Report No.: BTL-FICP-1-1504C174 Page 30 of 254 Radiated Measurement Photos 9KHz to 30MHz External antenna Report No.: BTL-FICP-1-1504C174 Page 31 of 254 Radiated Measurement Photos 30MHz to 1000MHz Internal antenna Report No.: BTL-FICP-1-1504C174 Page 32 of 254 Radiated Measurement Photos 30MHz to 1000MHz External antenna Report No.: BTL-FICP-1-1504C174 Page 33 of 254 Radiated Measurement Photos Above 1000MHz Internal antenna Report No.: BTL-FICP-1-1504C174 Page 34 of 254 Radiated Measurement Photos Above 1000MHz External antenna