TVE-3617T01066Secured Wireless Access Point

FortiAP 432F, 234F QuickStart Guide February 9, 2021 Copyright© 2021 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. 2 Product Registration Thank you for purchasing a Fortinet Device. http://support.fortinet.com Register to access: ▪ Cloud Management ▪ FortiGuard Updates ▪ Firmware Upgrades ▪ Technical Support ▪ Warranty Coverage Please register your FortiGate: Vous devez enregistrer le produir: Debe registrar el producto: 登録のお願い: 请马上注册: 3 Table of Contents Box Includes .........................................................................................6 Interfaces ..............................................................................................8 LED Indicators ......................................................................................9 Wall Installation ..................................................................................10 Pole Installation ..................................................................................11 PoE Injector Installation .....................................................................12 Waterproof Cabling ............................................................................13 External Antenna Installation .............................................................14 Box Includes .......................................................................................16 Interfaces ............................................................................................18 LED Indicators ....................................................................................19 Wall Installation ..................................................................................20 Pole Installation ..................................................................................21 PoE Injector Installation .....................................................................22 Waterproof Cabling ............................................................................23 Device Setup ......................................................................................24 FortiAP Cloud .....................................................................................25 FortiAP Deployment ...........................................................................26 45 FAP-432F FAP-234F SETUP Box Includes 67 FortiAP 432F Mounting Bracket for External Antennas N-Type Omni AntennasQuickStart Guide PoE Injector and AC Cord (100V-220V AC input, 54V DC output) Mounting Kit (pole straps, mounting bolts and screws, grounding cable and screw) Wall Mount BracketPole Mount Bracket FAP-432F 98 1 5 8 1 6 2 6 9 2 7 34 7 10 3 8 4 9 5 10 RESET A3 WiFi Dual Band Antenna LAN 2 1GE / PSE (RJ45) A2 WiFi Dual Band Antenna LAN 1 2.5GE / PoE (RJ45) WiFi Third Radio Antenna CONSOLE (RJ45) BLE Antenna A1 WiFi Dual Band Antenna A4 WiFi Dual Band Antenna Interfaces 4 5 BLE, ZigBee & Scanning Off: BLE, ZigBee & Radio 3 are off Amber: Radio 3 is on Blinking Amber: Radio 3 is scanning Blue: BLE is on Blinking Blue: BLE is transmitting Red: ZigBee is on Blinking Red: ZigBee is transmitting Green: BLE, ZigBee & Radio 3 are on Blinking Green: BLE, ZigBee & Radio 3 are transmitting 2 WiFi Off: Radio 1 & 2 are off Blue: Radio 1 is on Blinking Blue: Radio 1 is transmitting Amber: Radio 2 is on Blinking Amber: Radio 2 is transmitting Green: Radio 1 & 2 are on Blinking Green: Radio 1 & 2 are transmitting LAN 1 (2.5 Gbps 802.3at PoE RJ45) Off: Link is off Green: Link is on Blinking Green: Transmitting at 2.5Gbps Blinking Amber Transmitting at 100Mbps 3 LAN 2 (1Gbps 802.3at PSE RJ45) Off: Link is off Green: Link is on Blinking Green: Transmitting at 1Gbps Blinking Amber Transmitting at 100Mbps 1 1 2 3 4 5 Power Off: Device is off Green: Device is on Blinking Green: Booting up or upgrading Amber: Reserved for customizations 2 2 2 2 1 1 1 1 FAP-432F LED Indicators 1011 Your device mounts on a wall using the provided wallmount bracket and screws.Your device comes with a pole mount bracket, straps, and screws. You can mount the device to a pole vertically. Wall Installation Pole Installation FAP-432F 1. Mark the location of the mounting bolts using the wallmount bracket 2. Drill holes and hammer the bolts into the drilled holes 3. Attach the wallmou…

Text truncated - open the document above for the full version.

899 Kifer Road Sunnyvale, CA 94086, USA TEL: 408 235 7700 FAX: 408 235 7737 P R O F E S S I O N A L I N S T A L LA T I O N A T T E S T A T I O N Date: 2021-02-05 FCC ID: TVE-3617T01066 We, Fortinet Inc., hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is Secured Wireless Access Point and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test reports. FAP-234F Antenna Type Patch Antenna Connector IPEX Antenna No. Gain (dBi) 2400MHz 2450MHz 2500MHz UNII-1 & UNII-2A UNII-2C UNII-3 Ant1 9.47 10.2 10.16 - - - Ant2 9.24 10.25 9.73 - - - Ant3 - - - 9.75 9.94 10.02 Ant4 - - - 9.81 10.17 10.02 Antenna Type Patch Antenna Connector IPEX Scanning 3.38 3.38 3.84 4.92 4.54 4.8 BLE 4.25 4.99 4.15 - - - 899 Kifer Road Sunnyvale, CA 94086, USA TEL: 408 235 7700 FAX: 408 235 7737 3. The applicant should address the following items when justifying professional installation. (1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer. (2) Marketing — Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only. (3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use. (4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer? Device is Secured Wireless Access Point and it requires professional installer to ensure the appropriate output power / installation configuration is used during installation to comply with EIRP limits. Device uses unique antenna connectors. 4. Other professional installation requirements (1) Installation must be controlled. Description: The product will be distributed through controlled distribution channel which has special trained professional to install this product (2) Installed by licensed professionals. Description: Device sold to dealer who hires installers and need special trained professional in configuring and installing the product. (3) Installation requires special training. Description: The product need special programming, access to keypad, field strength measurements made, so must need special trained professional in configuring and installing the product. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Andrew Ji / Director TEL: 408 235 7700 FAX: 408 235 7737 E-mail: [email protected]

Operating Description-Antenna Spec.

899 Kifer Road, Sunnyvale, CA 94086 Tel: 408.235.7700 Fax: 408.235.7737 Date: 2021-01-21 FCC ID: TVE-3617T01066 AUTHORIZATION LETTER To Whom It May Concern: Fortinet Inc., hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/Supervisor of BV CPS Taoyuan on Fortinet Inc.’s behalf, within the scope of the powers granted herein, and shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Andrew Ji / Director TEL: 408 235 7700 FAX: 408 235 7737 E-mail: [email protected]

Reference No.: BDYS-WTW-P20110362_EXT Page 1/7 CONSTRUCTION PHOTOS OF EUT Reference No.: BDYS-WTW-P20110362_EXT Page 2/7 Reference No.: BDYS-WTW-P20110362_EXT Page 3/7 Reference No.: BDYS-WTW-P20110362_EXT Page 4/7 Reference No.: BDYS-WTW-P20110362_EXT Page 5/7 Reference No.: BDYS-WTW-P20110362_EXT Page 6/7 Reference No.: BDYS-WTW-P20110362_EXT Page 7/7

Reference No.: BDYS-WTW-P20110362_INT Page 1/7 CONSTRUCTION PHOTOS OF EUT Ant. 5 Ant. 6 Ant. 1 Ant. 2 Ant. 3 Ant. 4 Reference No.: BDYS-WTW-P20110362_INT Page 2/7 Reference No.: BDYS-WTW-P20110362_INT Page 3/7 Reference No.: BDYS-WTW-P20110362_INT Page 4/7 Reference No.: BDYS-WTW-P20110362_INT Page 5/7 Reference No.: BDYS-WTW-P20110362_INT Page 6/7 Reference No.: BDYS-WTW-P20110362_INT Page 7/7

Report No.: SABDYS-WTW-P20110362 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABDYS-WTW-P20110362 FCC ID: TVE-3617T01066 Test Model: FAP-234F Series Model: FortiAP 234Fxxxxxx, FAP-234Fxxxxxx, FORTIAP-234Fxxxxxx (Where "x" can be used as "A-Z", or "0-9", or “-", or blank for software changes or marketing purposes only) Received Date: Nov. 11, 2020 Test Date: Nov. 16 ~ Dec. 31, 2020 Issued Date: Jan. 27, 2021 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth ourfindings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABDYS-WTW-P20110362 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SABDYS-WTW-P20110362 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABDYS-WTW-P20110362 Original release Jan. 27, 2021 Report No.: SABDYS-WTW-P20110362 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Secured Wireless Access Point Brand: Fortinet Test Model: FAP-234F Series Model: FortiAP 234Fxxxxxx, FAP-234Fxxxxxx, FORTIAP-234Fxxxxxx (Where "x" can be used as "A-Z", or "0-9", or “-", or blank for software changes or marketing purposes only) Sample Status: Engineering sample Applicant: Fortinet lnc. Test Date: Nov. 16 ~ Dec. 31, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jan. 27, 2021 Celine Chou / Senior Specialist Approved by : , Date:Jan. 27, 2021 Bruce Chen / Senior Project Engineer Report No.: SABDYS-WTW-P20110362 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 36cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SABDYS-WTW-P20110362 Page No. 6 / 7 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Radio Frequency Band (MHz) Max AV Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2G traffic radio (Radio 1) CDD Mode 2412-2462 25.71 13.24 36 0.482 1 Beamforming Mode 2412-2462 22.34 13.24 36 0.222 1 5GHz traffic radio (Radio 2) CDD Mode 5180-5240 25.46 13.11 36 0.442 1 5745-5825 25.71 13.11 36 0.468 1 Beamforming Mode 5180-5240 22.45 13.11 36 0.221 1 5745-5825 22.70 13.11 36 0.234 1 5G Scanning radio (Radio 3) 2412-2462 21.09 3.84 36 0.019 1 5180-5240 20.34 4.92 …

Text truncated - open the document above for the full version.

Report No.: RFBDYS-WTW-P20110362-1 Page No. 1 / 133 Report Format Version:6.1.2 FCC Test Report Report No.: RFBDYS-WTW-P20110362-1 FCC ID: TVE-3617T01066 Test Model: FAP-234F Series Model: FortiAP 234Fxxxxxx, FAP-234Fxxxxxx, FORTIAP-234Fxxxxxx (Where "x" can be used as "A-Z", or "0-9", or “-", or blank for software changes or marketing purposes only) Received Date: Nov. 11, 2020 Test Date: Nov. 17 ~ Dec. 30, 2020 Issued Date: Jan. 27, 2021 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBDYS-WTW-P20110362-1 Page No. 2 / 133 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes .................................................................................................................. 11 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 12 3.3 Duty Cycle of Test Signal .................................................................................................................. 16 3.4 Description of Support Units ............................................................................................................. 18 3.4.1 Configuration of System under Test .................................................................................................. 18 3.5 General Description of Applied Standards and References ............................................................. 19 4 Test Types and Results ...................................................................................................................... 20 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 20 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 20 4.1.2 Test Instruments ................................................................................................................................ 21 4.1.3 Test Procedures ................................................................................................................................. 22 4.1.4 Deviation from Test Standard ............................................................................................................ 23 4.1.5 Test Setup .......................................................................................................................................... 23 4.1.6 EUT Operating Conditions ................................................................................................................. 24 4.1.7 Test Results ....................................................................................................................................... 25 4.2 Conducted Emission Measurement .................................................................................................. 65 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 65 4.2.2 Test Instruments ................................................................................................................................ 65 4.2.3 Test Procedures ..........................................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: BDYS-WTW-P20110362_TSup Page No. 1 / 3 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Reference No.: BDYS-WTW-P20110362_TSup Page No. 2 / 3 Radiated Emission Test (Above 1GHz) Reference No.: BDYS-WTW-P20110362_TSup Page No. 3 / 3 Radiated Emission Test (Below 1GHz)