U23CT6150DECT 6.0 Kitchen Phone System - Base

Model CT6150 SeriesDECT 6.0 Kitchen PhoneSpeakerphone SystemUser ' s Guide Your new GE telephone system is EXPANDABLE up to a total of4 handsets (by purchase of optional Model TBD handset withcharge cradle)Equipment Approval InformationYour telephone equipment is approved for connection to the Public SwitchedTelephone Network and is in compliance with parts 15 and 68, FCC Rules andRegulations and the Technical Requirements for Telephone Terminal Equipmentpublished by ACTA.1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information,the US number and Ringer Equivalence Number (REN) for the equipment. Youmust, upon request, provide this information to your telephone company.The REN is useful in determining the number of devices you may connect toyour telephone line and still have all of these devices ring when your telephonenumber is called. In most (but not all) areas, the sum of the RENs of all devicesconnected to one line should not exceed 5. To be certain of the number ofdevices you may connect to your line as determined by the REN, you shouldcontact your local telephone company.A plug and jack used to connect this equipment to the premises wiring andtelephone network must comply with the applicable FCC Part 68 rules andrequirements adopted by the ACTA. A compliant telephone cord and modularplug is provided with this product. It is designed to be connected to acompatible modular jack that is also compliant. See installation instructions fordetails.Notesz This equipment may not be used on coin service provided by the telephone company. z Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with yourlocal telephone company. z Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. z If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarmequipment. If you have questions about what will disable alarm equipment,consult your telephone company or a qualified installer. US Number is located on the cabinet bottom. REN Number is located on the cabinet bottom. Notice: This CT6150 telephone is compliant with the DECT 6.0 standardwhich operates in the 1.92GHz to 1.93GHz frequency range. 2 Rights of the Telephone Company Should your equipment cause trouble on y our line which may harm thetelephone network, the telephone company shall, where practicable, notify youthat temporary discontinuance of service may be required. Where prior noticeis not practicable and the circumstances warrant such action, the telephonecompany may temporarily discontinue service immediately. In case of suchtemporary discontinuance, the telephone company must: (1) promptly notify youof such temporary discontinuance; (2) afford you the opportunity to correct thesituation; and (3) inform you of your right to bring a complaint to the Commissionpursuant to procedures set forth in Subpart E of Part 68, FCC Rules andRegulations.The telephone company may make changes in its communications facilities,equipment, operations or procedures where such action is required in theoperation of its business and not inconsistent with FCC Rules and Regulations.If these changes are expected to affect the use or performance of yourtelephone equipment, the telephone company must give you adequate notice, inwriting, to allow you to maintain uninterrupted service. Interference InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference; and(2) This device must accept any interference received, including interference thatmay cause undesired operation.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.Privacy of Communications may not be ensured when using this product.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: z Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “ receiving ” the interference). z Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. z Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also,the Federal Communications Commission has prepared a helpful booklet,“ How To Identify and Resolve Radio/TV Interference Problems. ” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402.Please specify stock number 004-000-00345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.Hearing Aid Compatibility (HAC)This telephone system meets FCC standards for Hearing Aid Compatibility.LicensingLicensed under US Patent 6,427,009.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment. This equipment sho…

Text truncated - open the document above for the full version.

ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Top View of EUT Bottom View of EUT ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Front View of EUT Side View of EUT ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Rear View of EUT Side View of EUT ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Adaptor Front View of Adaptor Side View of Adaptor ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Side View of Adaptor Front View of Adaptor

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. P R I V A C Y O F C O M M U N I C A T I O N S M A Y N O T B E E N S U R E D W H E N U S I N G T H I S P H O N E . F C C I D : U 2 3 C T 6 1 5 0 R E N : 0 . 0 B U S : 5 G G W 4 0 0 B C T 6 1 5 0 C T 6 1 5 0 MODEL NO.: CT6150 MODEL NO.: CT6150 MADE IN CHINA S/No FCC ID: U23CT6150H x x x x x x x

ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Internal View of Adaptor ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT Component View of Adaptor’s PCB Solder View of Adaptor’s PCB

Rev. No 1.0 Safety exposure levels Standard Applicable: FCC 15.319(i) UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091 and 2.1093, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, applicable. Measurement procedure Consideration of radio frequency radiation exposure for EUT is done as SAR test according IEEE 1528 (for PP) □ MPE calculation as below (for FP, Repeater) ■ SAR test results: not applicable MPE calculation: The EUT is considered as a mobile device according to OET Bulletin 65, Edition –97- 01. Therefore distance to human body of min. 20 cm is determined. The limit of Power density for General Population / Umcontrolled Exposure is 1.0 mW/cm 2 . Formula: S = EIRP/4 TT R 2 Calculation: EIRP Radiated Power (dBm) 17.40 EIRP Radiated Power (mW) 54.95 R Disance (cm) 20 S Power Density (mW/cm 2 ) 0.011 Results: Complies

FCC ID: U23CT6150 ETC Report No.: 07-03-MAS-078-02 Sheet 1 of 41 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D (15.323c) Report No.: 07-03-MAS-078-02 Client: Thomson Inc. Product: DECT6.0 Kitchen phone speakerphone system (FP) Model: CT6150 FCC ID: U23CT6150 Manufacturer/supplier: Huiyang CCT Telecommunications Products Co., Ltd. Date test item received: 2007/03/07 Date test campaign completed: 2007/04/10 Date of issue: 2007/04/10 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 41 pages Test Engineer Checked By Approved By James Cheng Joe Hsieh Winpo Tsai FCC ID: U23CT6150 ETC Report No.: 07-03-MAS-078-02 Sheet 2 of 41 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION ...............................................................................................................3 1.1 Testing Laboratory...........................................................................................................................3 1.2 Client Information.............................................................................................................................3 1.3 Manufacturer....................................................................................................................................3 2 TEST INFORMATION ........................................................................................................................4 2.1 Description of Tested Device(s)....................................................................................................4 2.2 Test Environment.............................................................................................................................4 3 TEST REPORT SUMMARY ..............................................................................................................5 3.1 Test Summary..................................................................................................................................5 3.2 Other Comments.............................................................................................................................6 4 TEST SETUP .......................................................................................................................................7 4.1 Monitoring Tests..............................................................................................................................7 5 TEST EQUIPMENT LIST ..................................................................................................................8 6 TEST RESULT ....................................................................................................................................9 6.1 Monitoring time.................................................................................................................................9 6.2 Monitoring threshold......................................................................................................................10 6.3 Maximum transmit period.............................................................................................................11 6.4 System Acknowledgement...........................................................................................................13 6.5 Least Interfered Channel, LIC.....................................................................................................20 6.6 Random waiting.............................................................................................................................28 6.7 Monitoring bandwidth and reaction time....................................................................................29 6.8 Monitoring antenna........................................................................................................................36 6.9 Monitoring threshold relaxation...................................................................................................37 6.10 Duplex system LBT.....................................................................................................................38 6.11 Co-located device LBT...............................................................................................................39 6.12 Fair Access...................................................................................................................................40 A PPENDIX1 MANUFACTURER DECLARATION .........................................................................................41 FCC ID: U23CT6150 ETC Report No.: 07-03-MAS-078-02 Sheet 3 of 41 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 1 GENARAL INFORMATION 1.1 Testing Laboratory Name: Electronic Testing Center, Taiwan Address: No. 8, Lane 29, Wenming Rd., Leshan Tsuen, Guishan Shiang, Taoyuan Country, 33383, Taiwan, R.O.C. Telephone: 886-3-3280026 Fax: 886-3-3276188 NVLAP lab registration #: 200133-0 IC OATS registration #: IC 2949-1 1.2 Client Information Name: Market-Direct Ltd Address: 133 Elm Drive, North Kingstown, RI 02852, USA 1.3 Manufacturer Name: Huiyang CCT Telecommunications Products Co., Ltd. Address: CCT Technology Park, San He Economic Developmental Zone, Huiyang District, Huizhou City, Guangdong Province, PRC FCC ID: U23CT6150 ETC Report No.: 07-03-MAS-078-02 Sheet 4 of 41 Sheets Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 2 TEST INFORMATION…

Text truncated - open the document above for the full version.

Rev. No 1.0 FCC Part 15 Subpart D Test Report of E.U.T. : DECT 6.0 Kitchen phone speakerphone system (Base Station FP) MODEL : CT6150 FCC ID. : U23CT6150 for APPLICANT : Market-Direct Ltd. ADDRESS : 133 Elm Drive, North Kingstown, RI 02852, USA Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU TSUEN, LINKOU SHIANG TAIPEI COUNTY, TAIWAN, 24442, R.O.C. TEL : (02)26023052 FAX: (02)26010910 http ： // www.etc.org.tw ； e-mail ： [email protected] Report Number : 07-03-RBF-012-01 ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 TEST REPORT CERTIFICATION Applicant : Market-Direct Ltd. 133 Elm Drive, North Kingstown, RI 02852, USA Manufacturer : Huiyang CCT Telecommunications Products Co., Ltd. CCT Technology Park, San He Economic Developmental Zone, Huiyang District, Huizhou City, Guangdong Province, PRC Description of EUT a) Type of EUT : DECT 6.0 Kitchen phone speakerphone system (Base Station FP) b) Trade Name : Market Direct c) Model No. : CT6150 d) Power Supply : Adaptor: I/P: 120Vac 60Hz 6W; O/P: 7.5Vdc 350mA e) Frequency Range : 1921.536~1928.448MHz Regulation Applied : FCC Rules and Regulations Part 15 Subpart D (2006) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.17-2006/ ANSI C63.4-2003, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Mar. 29, 2007 Test Engineer : (Vincent Chang) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION ......................................................................................................1 1.1 Testing Laboratory ...................................................................................................................1 1.2 Client Information ....................................................................................................................1 1.3 Manufacturer ............................................................................................................................1 2 TEST INFORMATION................................................................................................................2 2.1 Descriptino of Tested Device(s) ..............................................................................................2 2.2 Test Environment .....................................................................................................................2 3 TEST REPORT SUMMARY.......................................................................................................3 3.1 Test Summary ..........................................................................................................................3 3.2 Devices for Tested System.......................................................................................................3 4 TEST SETUP.................................................................................................................................4 4.1 Frequency and Timing Measurements .....................................................................................4 4.2 Conducted Emission Tests .......................................................................................................4 4.3 Radiated Emission Tests ..........................................................................................................5 4.4 Power Line Conducted Tests ...................................................................................................5 5 TEST EQUIPMENT LIST ...........................................................................................................6 6 TEST RESULT..............................................................................................................................7 6.1 Corrdination with fixed microwave .........................................................................................7 6.2 Cross Reference .......................................................................................................................8 6.3 Labeling Requirements ............................................................................................................9 6.4 Power Line Conducted Emissions .........................................................................................10 6.5 Antenna Requirement.............................................................................................................17 6.6 digital Modulation Techniques ..............................................................................................17 6.7 Peak Power Output.................................................................................................................18 6.8 Power Spectral Density ..........................................................................................................21 6.9 Antenna Gain .........................................................................................................................24 6.10 Automatic discontinuation of transmission..........................................................................24 6.11 Safety exposure levels..........................................................................................................25 6.12 Emission Bandwidth B..........................................................................................................26 6.13 Emissions inside and outside the subband ...........................................................................29 6.14 Frame period and jitter ...............................................…

Text truncated - open the document above for the full version.

ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 Photos of Conduction Measuring Setup ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0 Photos of Radiation Measuring Setup ETC Report No. : 07-03-RBF-012-01 FCC ID. : U23CT6150 Rev. No 1.0