U8G-P1234Peplink Pepwave Wireless Product

MAX Series User Manual Peplink Products: MAX Adapter Peplink Firmware 8.4.0 February 2024 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2024 Peplink Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink International Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Table of Contents Introduction and Scope 6 Glossary 8 1 Product Features 9 1.1 Supported Network Features 9 1.2 Other Supported Features 12 2 MAX Adapter Overview 13 2.1 Panel Appearance 13 3 Advanced Feature Summary 14 3.1 Drop-in Mode and LAN Bypass: Transparent Deployment 14 3.2 QoS: Clearer VoIP 14 3.3 Per-User Bandwidth Control 15 3.4 High Availability via VRRP 15 3.5 USB Modem and Android Tethering 16 3.6 Built-In Remote User VPN Support 16 3.7 SIM-card USSD support 17 3.8 KVM Virtualization 17 3.9 DPI Engine 18 3.10 NetFlow 18 3.11 Wi-Fi Air Monitoring 18 3.12 SP Default Configuration 18 3.13 Peplink Relay 19 3.14 DNS over HTTPS (DoH) 19 3.15 Peplink InTouch 19 3.16 Synergy Mode 19 3.17 Virtual WAN on VLAN 20 4 Installation 21 4.1 Preparation 21 4.2 Constructing the Network 21 4.3 Configuring the Network Environment 22 5 Connecting to the Web Admin Interface 23 6 SpeedFusion Connect 25 6.1 Activate SpeedFusion Connect Protect 25 6.2 Enable SpeedFusion Connect Protect 26 6.3 Route by Cloud Application 31 https://www.peplink.com 2 Copyright @ 2021 Peplink 6.4 Route by Wi-Fi SSID 32 6.5 Route by LAN Client 33 7 Configuring the LAN Interface(s) 35 7.1 Basic Settings 35 7.2 Port Settings 44 7.3 Captive Portal 45 8 Configuring the WAN Interface(s) 49 8.1 Ethernet WAN 52 8.2 Cellular WAN 60 8.3 Wi-Fi WAN 66 8.4 WAN Connection Settings (Common) 70 8.5 WAN Health Check 71 8.6 Bandwidth Allowance Monitoring 74 8.7 Additional Public IP address 75 8.8 Dynamic DNS Settings 75 9 SpeedFusion VPN 77 9.1 SpeedFusion VPN 78 10 IPsec VPN 88 10.1 IPsec VPN Settings 88 10.2 GRE Tunnel 92 11 OpenVPN 94 12 Outbound Policy 95 12.1 Adding Rules for Outbound Policy 95 13 Port Forwarding 105 13.1 UPnP / NAT-PMP Settings 107 14 NAT Mappings 108 15 Media Fast 110 15.1 Setting Up MediaFast Content Caching 110 15.2 Viewing MediaFast Statistics 112 15.3 Prefetch Schedule 113 16 Edge Computing 115 16.1 Configuring the ContentHub 115 16.2 Configure a website for ContentHub 115 16.3 Configure an application for ContentHub 117 17 Docker 120 18 KVM 121 19 QoS 122 https://www.peplink.com 3 Copyright @ 2021 Peplink 19.1 User Groups 122 19.2 Bandwidth Control 123 19.3 Application Queue 123 19.4 Application 124 20 Firewall 126 20.1 Access Rules 127 20.2 Content Blocking 135 21 Routing Protocols 137 21.1 OSPF & RIPv2 137 21.2 BGP 139 22 Remote User Access 144 23 Miscellaneous Settings 147 23.1 High Availability 147 23.2 RADIUS Server 151 23.3 Certificate Manager 153 23.4 Service Forwarding 154 23.5 Service Passthrough 157 23.6 UART 158 23.7 GPS Forwarding 160 23.8 Ignition Sensing 161 Ignition Sensing installation 161 GPIO Menu 163 23.9 NTP Server 164 23.10 Grouped Networks 165 23.11 Remote SIM Management 166 23.12 SIM Toolkit 168 23.13 UDP Relay 170 24 AP 171 24.1 AP Controller 171 24.2 Wireless SSID 171 24.3 Wireless Mesh 177 24.4 Settings 178 25 AP Controller Status 185 25.1 Info 185 25.2 Access Point 187 25.3 Wireless SSID 190 25.4 Wireless Client 191 https://www.peplink.com 4 Copyright @ 2021 Peplink 25.5 Mesh / WDS 192 25.6 Nearby Device 193 25.7 Event Log 193 26 Toolbox 194 27 System 195 27.1 Admin Security 195 27.2 Firmware 200 27.3 Time 202 27.4 Schedule 203 27.5 Email Notification 204 27.6 Event Log 207 27.7 SNMP 208 27.8 SMS Control 210 27.9 InControl 211 27.10 Configuration 212 27.11 Feature Add-ons 213 27.12 Reboot 213 28 Tools 214 28.1 Ping 214 28.2 Traceroute Test 215 28.3 Wake-on-LAN 215 28.4 WAN Analysis 216 28.5 CLI (Command Line Interface Support) 219 29 Status 220 29.1 Device 220 29.2 GPS Data 222 29.3 Active Sessions 223 29.4 Client List 225 29.5 UPnP / NAT-PMP 226 29.6 OSPF & RIPv2 227 29.7 BGP 227 29.8 SpeedFusion VPN 227 29.9 Event Log 232 30 WAN Quality 234 31 Usage Reports 235 31.1 Real-Time 235 31.2 Hourly 236 https://www.peplink.com 5 Copyright @ 2021 Peplink 31.3 Daily 237 31.4 Monthly 238 Appendix A: Restoration of Factory Defaults 240 Appendix B: FusionSIM Manual 241 Appendix C: Overview of ports used by Peplink SD-WAN routers and other Peplink services 253 Appendix D: Declaration 255 Introduction and Scope Pepwave routers provide link aggregation and load balancing across multiple WAN connections, allowing a combination of technologies like 3G HSDPA, EVDO, 4G LTE, Wi-Fi, external WiMAX dongle, and satellite to be utilized to connect to the Internet. The MAX wireless SD-WAN router series has a wide range of products suitable for many different deployments and markets. Entry level SD-WAN models such as the MAX BR1 are suitable for SMEs or branch offices. High-capacity SD-WAN routers such as the MAX HD2 are suitable for larger organizations and head offices. This manual covers setting up Pepwave routers and provides an introduction to their features and usage. Tips Want to know more about Pepwave routers? Visit our YouTube Channel for a video introduction ! https://www.peplink.com 6 Copyright @ 2021 Peplink https://youtu.be/13M-JHRAICA https://www.peplink.com 7 Copyright @ 2021 Peplink Glossary The following terms, acronyms, and abbreviations are frequently used in this manual: Term Definition 3G 3rd generation standards for wireless communications (e.g., HSDPA) 4G 4th generation standards for wireless communications (e.g., LTE) DHCP Dynamic Host Configuration Protocol DNS Domain Name System EVDO Evolution-Data Optimized FQDN Fully Qualified Domain Name HSDPA High-Speed Downlink Packet Access HTTP Hyper-Text Transfer Protocol ICMP Internet Control Message Protocol IP Internet Protocol LAN Local Area Network MAC Address Media Access Control Address MTU Maximum Transmission Unit MSS Maximum Segment…

Text truncated - open the document above for the full version.

The firmware will now be applied to the router*. The amount of time it takes for the firmware to upgrade will also depend on the router that’s being upgraded. *Upgrading the firmware will cause the router to reboot. Web admin interface : install updates manually In some cases, a special build may be provided via a ticket or it may be found in the forum. Upgrading to the special build can be done using this method, or using IC2 if you are using that to manage your firmware upgrades. A manual upgrade using the GA firmware posted on the site may also be recommended or required for a couple of reasons. All of the Peplink/Pepwave GA firmware can be found here Navigate to the relevant product line (ie. Balance, Max, FusionHub, SOHO, etc). Some product lines may have a dropdown that lists all of the products in that product line. Here is a screenshot from the Balance line. If the device has more than one firmware version the current hardware revision will be required to know what firmware to download. Navigate to System > Firmware and click the Choose File button under the Manual Firmware Upgrade section. Navigate to the location that the firmware was downloaded to select the “.img” file and click the Open button. Click on the Manual Upgrade button to start the upgrade process. https://www.peplink.com 201 Copyright @ 2021 Peplink A prompt will be displayed advising to download the Current Active Configuration. Please click on the underlined download text. After downloading the current config click the Ok button to start the upgrade process. The firmware will now be applied to the router*. The amount of time it takes for the firmware to upgrade will depend on the router that’s being upgraded. *Upgrading the firmware will cause the router to reboot. The InControl method Described in this knowledgebase article on our forum. 27.3 Time Time Settings enables the system clock of the Pepwave router to be synchronized with a specified time server. Time settings are located at System > Time . Time Settings Time Zone This specifies the time zone (along with the corresponding Daylight Savings Time scheme). The Time Zone value affects the time stamps in the Pepwave router’s event log and e-mail notifications. Check Show all to show all time zone options. https://www.peplink.com 202 Copyright @ 2021 Peplink Time Sync This field allows to select your time sync mode, the available options are: ● Time Server ● GPS ● GPS with Time Server as fallback Time Server This setting specifies the NTP network time server to be utilized by the Pepwave router. 27.4 Schedule Enable and disable different functions (such as WAN connections, outbound policy, and firewalls at different times, based on a user-scheduled configuration profile. The settings for this are located at System > Schedule Enable scheduling, and then click on your schedule name or on the New Schedule button to begin. https://www.peplink.com 203 Copyright @ 2021 Peplink Edit Schedule Profile Enabling Click this checkbox to enable this schedule profile. Note that if this is disabled, then any associated features will also have their scheduling disabled. Name Enter your desired name for this particular schedule profile. Schedule Click the drop-down menu to choose pre-defined schedules as your starting point. Please note that upon selection, previous changes on the schedule map will be deleted. Schedule Map Click on the desired times to enable features at that time period. You can hold your mouse for faster entry. 27.5 Email Notification Email notification functionality provides a system administrator with up-to-date information on network status. The settings for configuring email notifications are found at System>Email Notification . Email Notification Settings Email Notification This setting specifies whether or not to enable email notification. If Enable is checked, the Pepwave router will send email messages to system administrators when the WAN status changes or when new firmware is available. If Enable is not checked, email notification is disabled and the Pepwave router will not send email messages. https://www.peplink.com 204 Copyright @ 2021 Peplink SMTP Server This setting specifies the SMTP server to be used for sending email. If the server requires authentication, check Require authentication . Connection Security This setting specifies via a drop-down menu one of the following valid Connection Security: ● None ● STARTTLS ● SSL/TLS SMTP Port This field is for specifying the SMTP port number. By default, this is set to 25 . If Connection Security is selected “ STARTTLS ”, the default port number will be set to 587 . If Connection Security is selected “ SSL/TLS ”, the default port number will be set to 465 . You may customize the port number by editing this field. SMTP User Name / Password This setting specifies the SMTP username and password while sending email. These options are shown only if Require authentication is checked in the SMTP Server setting. Confirm SMTP Password This field allows you to verify and confirm the new administrator password. Sender’s Email Address This setting specifies the email address the Pepwave router will use to send reports. Recipient’s Email Address This setting specifies the email address(es) to which the Pepwave router will send email notifications. For multiple recipients, separate each email addresses using the enter key. After you have finished setting up email notifications, you can click the Test Email Notification button to test the settings before saving. After Test Email Notification is clicked, you will see this screen to confirm the settings: Click Send Test Notification to confirm. In a few seconds, you will see a message with detailed test results. https://www.peplink.com 205 Copyright @ 2021 Peplink https://www.peplink.com 206 Copyright @ 2021 Peplink 27.6 Event Log Event log functionality enables event logging at a specified remote syslog server. The settings for configuring the remote system log can…

Text truncated - open the document above for the full version.

UK Statement for Pepwave Routers ( MAX BR2 Pro ) https://www.peplink.com 409 Copyright @ 2021 Peplink https://www.peplink.com 410 Copyright @ 2021 Peplink CE Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com 411 Copyright @ 2021 Peplink https://www.peplink.com 412 Copyright @ 2021 Peplink 2.4GHz ( 2412 - 2472 MHz ) : 19.84 dBm 5GHz ( 5150 - 5250 MHz ) : 22.76 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com 413 Copyright @ 2021 Peplink UK Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com 414 Copyright @ 2021 Peplink https://www.peplink.com 415 Copyright @ 2021 Peplink USB WAN Modem Port Specification MAX Series MAX 700 MAX HD2 / MAX HD2 Media Fast MAX HD2 Mini MAX HD2 / HD4 MBX MAX BR1 ENT MAX HD4 / MAX HD4 Media Fast / MediaFast 200 MAX BR2 Pro Output Rating 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 0.5A 5V DC, 2A 5V DC, 2A 5V DC, 2A https://www.peplink.com 416 Copyright @ 2021 Peplink FCC Requirements for Operation in the United States Federal Communications Commission (FCC) Compliance Notice: For MAX Adapter Federal Communication Commission Interference Statement Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. https://www.peplink.com 417 Copyright @ 2021 Peplink

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Covered Equipment Certification Attestation Letter Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: U8G-P1234 PISMO LABS TECHNOLOGY LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. PISMO LABS TECHNOLOGY LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Antony Chong Title: Director of Hardware Engineering Company Name: PISMO LABS TECHNOLOGY LIMITED Date: 3/4/2024

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: March 13, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 3/13/2024 - 3/12/2025 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less th an one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: PISMO LABS TECHNOLOGY LIMITED Grantee Code: U8G Grantee FRN: 0016347064 Contact Name: Antony Chong Street Address: A8 , 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, City/Province/Zip: Cheung Sha Wan, Hong Kong Telephone No: +852-2990-7600 Email: [email protected] Applicant Signature: Date: 3 / 13 / 2024 Signed by (Printed Name/Title): Antony Chong / Director of Hardware Engineering

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Subject: Request for confidentiality FCC ID: U8G-P1234 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby request non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Operational Description (SW Security) Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 07/03/2024 Name and signature of applicant: Antony Chong

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong ____________________ Model Name Declaration Date: 3/4/2024 To whom it may concern We, PISMO LABS TECHNOLOGY LIMITED, declare that our product “Peplink Pepwave Wireless Product, model: MAX Adapter, MAX-ADP-LTE-US-T-PRM are identical in all electrical aspects in relating to the circuit design, PCB layout, electrical components used, internal wiring and function. The differences are the model and market segmentation. MAX-ADP-LTE-US-T-PRM is the codes used to order our products for marketing purposes. Authorized Signature on behalf of PISMO LABS TECHNOLOGY LIMITED. Name: Antony Chong Position: Director of Hardware Engineering

Report No.: 2410272R-Product Photos Page: 1 of 3 (1) EUT Photo (2) EUT Photo Report No.: 2410272R-Product Photos Page: 2 of 3 (3) EUT Photo (4) EUT Photo Report No.: 2410272R-Product Photos Page: 3 of 3 (5) EUT Photo (6) EUT Photo

REV1 02-140010-00 02-140010-00 8) Serial No. Serial No. (Barcode) “Serial” Retrieve from databaseLabel ContentLabel Content “Barcode” *Checking: without hyphen LAN MAC“LAN MAC” *Checking: ends at “0” IMEIIMEI Made in Taiwan M? Country of Origin Input information CM Code HW?Hardware Version RED = ONLINE PRINTING CONTENTPRE-PRINTING MAX-ADP-LTE-US-T-PRM R1.0mm Made in Taiwan M8 HW1 Serial No.:2101-878D-2CDA IMEI:863890053370110 Input: Input: Model: MAX Adapter Product Code:MAX-ADP-LTE-US-T-PRM LAN MAC:10-56-CA-5A-05-DA Defaul t Access https: //192.168.50. 1 Use rname: admin Password: admin 9- 36V D C, 5.7W max (Power P ort) 5V D C, 2A ( USB P ort) FCC ID: U8G-P 1234 Contains FCC ID: XMR201808EC25AF Made in Taiwan M8 HW1 Serial No.:2101-878D-2CDA IMEI:863890053370110 Input: Input: Model: MAX Adapter Product Code:MAX-ADP-LTE-US-T-PRM LAN MAC:10-56-CA-5A-05-DA Defaul t Access https: //192.168.50. 1 Use rname: admin Password: admin 9- 36V D C, 5.7W max (Power P ort) 5V D C, 2A ( USB P ort) FCC ID: U8G-P 1234 Contains FCC ID: XMR201808EC25AF Input: Input: Model: MAX Adapter Product Code:MAX-ADP-LTE-US-T-PRM LAN MAC:10-56-CA-5A-05-DA Defaul t Access https: //192.168.50. 1 Use rname: admin Password: admin 9- 36V D C, 5.7W max (Power P ort) 5V D C, 2A ( USB P ort) FCC ID: U8G-P 1234 Contains FCC ID: XMR201808EC25AF

Report No.: 2410272R-Product Photos Page: 1 of 9 (1) EUT Photo (2) EUT Photo Report No.: 2410272R-Product Photos Page: 2 of 9 (3) EUT Photo (4) EUT Photo Report No.: 2410272R-Product Photos Page: 3 of 9 (5) EUT Photo (6) EUT Photo Report No.: 2410272R-Product Photos Page: 4 of 9 (7) EUT Photo (8) EUT Photo Report No.: 2410272R-Product Photos Page: 5 of 9 (9) EUT Photo (10) EUT Photo (0.6-2.7G 3.4-3.8G Antenna) Report No.: 2410272R-Product Photos Page: 6 of 9 (11) EUT Photo (12) EUT Photo (GPS Antenna) Report No.: 2410272R-Product Photos Page: 7 of 9 (13) EUT Photo (14) EUT Photo (GPS Antenna) Report No.: 2410272R-Product Photos Page: 8 of 9 (15) EUT Photo (16) EUT Photo Report No.: 2410272R-Product Photos Page: 9 of 9 (17) EUT Photo

Report No.: 2410272R-E3012110001-A Page: 1 of 23 Test report No: 2410272R-E3012110001-A FCC TEST REPORT Product Name Peplink Pepwave Wireless Product Trademark Model and /or type reference MAX Adapter MAX-ADP-LTE-US-T-PRM FCC ID U8G-P1234 Applicant ́s name / address PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Manufacturer ́s name / address PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Test method requested, standard FCC CFR Title 47 Part 15 Subpart B: 2022, Class A Verdict Summary IN COMPLIANCE Documented By ( Adm. Specialist / Peggy Tu ) Approved By ( Director / Vincent Lin ) Date of Report 2024/01/10 Date of Issue 2024/02/22 Report No. 2410272R-E3012110001-A Report Version V1.0 Report No.: 2410272R-E3012110001-A Page: 2 of 23 INDEX Description Page 1. General Information ................................................................................................................ 5 1.1. EUT Description ............................................................................................................... 5 1.2. Mode of Operation ........................................................................................................... 6 1.3. Configuration & Details of Tested System ....................................................................... 7 1.4. EUT Exercise Software .................................................................................................... 8 2. Technical Test.......................................................................................................................... 9 2.1. Summary of Test Result ................................................................................................... 9 2.2. List of Test Equipment ................................................................................................... 10 2.3. Measurement Uncertainty .............................................................................................. 11 2.4. Test Environment ........................................................................................................... 12 3. Conducted Emission ............................................................................................................. 13 3.1. Test Specifications ......................................................................................................... 13 3.2. Test Setup ...................................................................................................................... 13 3.3. Limit ............................................................................................................................... 13 3.4. Test Procedure ............................................................................................................... 14 3.5. Test Result ..................................................................................................................... 15 4. Radiated Emission ................................................................................................................ 17 4.1. Test Specification ........................................................................................................... 17 4.2. Test Setup ...................................................................................................................... 17 4.3. Limit ............................................................................................................................... 18 4.4. Test Procedure ............................................................................................................... 19 4.5. Test Result ..................................................................................................................... 20 Product Photos: Please refer to the file: 2410272R-Product Photos Report No.: 2410272R-E3012110001-A Page: 3 of 23 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty her…

Text truncated - open the document above for the full version.