UKOLPSUWBSensor for detection ad localization

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 44, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it AME_Man_AMESPHERE_KEY_MultiLanguage_V01 Pag. | 1 AMESPHERE KEY AMESPHERE TABLET AMESPHERE TAG ITA Manuale di Uso e Installazione USA-GBR Use and Installation Manual DEU Betriebs- und Installationsanleitung ESP Manual de Uso e Instalación FRA Manuel d’utilisation et d’installation (V01) For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 44, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it AME_Man_AMESPHERE_KEY_MultiLanguage_V01 Pag. | 2 1 INDICE/ INDEX/ INDEX/ ÍNDICE/ INDICE 1 INDICE/ INDEX/ INDEX/ ÍNDICE/ INDICE ................................................................................................................... 2 2 TABELLA REVISIONI / REVISION TABLE/ REVISIONSFÄHIG / TABLA DE REVISIÓN / TABLE DE RÉVISION 4 3 SCOPO /SCOPE/ UMFANG/ ALCANCE/ PORTÉE .................................................................................................... 4 3.1 ITALIANO ................................................................................................................................................................. 4 3.2 ENGLISH .................................................................................................................................................................. 4 3.3 DEUTSCH ................................................................................................................................................................ 4 3.4 ESPAÑOL ................................................................................................................................................................. 4 3.5 FRANÇAIS ............................................................................................................................................................... 4 4 COMPONENTI DEL SISTEMA/ SYSTEM COMPONENTS/ SYSTEMKOMPONENTEN/ COMPONENTES DEL SISTEMA / COMPOSANTS DU SYSTÈME ........................................................................................................................... 5 5 ACCESSORI/ ACCESSORIES/ ZUBEHÖR /ACCESORIOS/ ACCESSOIRES .......................................................... 6 6 ISTRUZIONI DI SICUREZZA /SAFETY INSTRUCTIONS / SICHERHEITSHINWEISE / INSTRUCCIONES DE SEGURIDAD/ INSTRUCTIONS DE SÉCURITÉ ..................................................................................................................... 7 6.1 ITALIANO ................................................................................................................................................................. 7 6.1.1 SMALTIMENTO ................................................................................................................................................. 7 6.1.2 DESTINAZIONE E LIMITAZIONI D’USO ......................................................................................................... 7 6.1.3 INSTALLAZIONE DEL PRODOTTO E ISTRUZIONI DA IMPARTIRE AI CONDUCENTI ........................... 8 6.1.4 ESCLUSIONE DI RESPONSABILITÀ DEL PRODUTTORE A.M.E. ............................................................... 8 6.2 ENGLISH .................................................................................................................................................................. 9 6.2.1 Disposal .............................................................................................................................................................. 9 6.2.2 DESTINATION AND LIMITATIONS OF USE .................................................................................................. 9 6.2.3 PRODUCT INSTALLATION AND DRIVER INSTRUCTIONS ........................................................................ 9 6.2.4 A.M.E. PRODUCER'S DISCLAIMER .............................................................................................................. 10 6.2.5 ADDITIONAL DIRECTIONS FOR USE: USA AND CANADA ....................................................................... 10 6.3 DEUTSCH .............................................................................................................................................................. 11 6.3.1 Entsorgung ....................................................................................................................................................... 11 6.3.2 VERWENDUNGSZWECK UND NUTZUNGSBESCHRÄNKUNGEN .......................................................... 11 6.3.3 INSTALLATION DES PRODUKTS UND ANWEISUNGEN, DIE DEN FAHRERN ERTEILT WERDEN MÜSSEN ......................................................................................................................................................................... 12 6.3.4 HAFTUNGSAUSSCHLUSS DES HERSTELLERS A.M.E. ........................................................................... 12 6.4 ESPAÑOL ............................................................................................................................................................... 12 6.4.1 ELIMINACIÓN .................................................................................................................................................. 12 6.4.2 FINALIDAD DE USO PREVISTA Y RESTRICCIONES DE USO .................................................................. 13 6.4.3 INSTALACIÓN DEL PRODUCTO E INSTRUCCIONES PARA LOS CONDUCTORES ............................. 13 6.4.4 DESCARGO DE RESPO…

Text truncated - open the document above for the full version.

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 50-54, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/1 Covered Equipment Certification Attestation Letter DATE: february 08 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: UKOLPSUWB Advanced Microwave Engineering s.r.l. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Advanced Microwave Engineering s.r.l. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is / is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Filippo Bonifacio. Title: Executive Vice President. Company Name: Advanced Microwave Engineering s.r.l. Date: february 08 2023

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 50-54, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/1 U.S. Agent Designation for Service of Process - Certification Attestation Letter DATE: february 08 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: UKOLPSUWB Per section 2.911(d)(7) of the FCC rules, Advanced Microwave Engineering s.r.l. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: A.M.E. USA, INC. Physical U.S. Company Address: 4470 Cox Road, Ste 250, Glen Allen, Virginia, 23060- 6765. Agent name: Filippo Bonifacio Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Filippo Bonifacio. Printed name: Filippo Bonifacio. Title: Executive Vice President. Title: Vice President. Company Name: Advanced Microwave Engineering s.r.l. Company Name: A.M.E. USA, INC. Date: february 08 2023 Date: february 08 2023 * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 50-54, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/1 12/1/2022 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint Advanced Microwave Engineering, via Lucca 44, 50142 Firenze (Italy), to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides still resides with us. Sincerely, Printed name: Filippo Bonifacio, Executive Vice President

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 50-54, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/1 Model Differences Letter FCC ID: UKOLPSUWB Models: LPSUWB001, LPSUWB002 Differences between variants: LPSUWB001 works only when externally powered. The LPSUWB002 has an internal rechargeable battery allowing a standalone operation without connections if needed. Both models have same radio circuits Dated this 12 Day of January 20 23 By: Filippo Bonifacio Signature Printed Telephone: +39 (0)55 73921 Applicant: Advanced Microwave Engineering

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 50-54, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/1 January 12, 2023 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: UKOLPSUWB Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Filippo Bonifacio Title: Executive Vice President Company Name: Advanced Microwave Engineering

Manufacturer: Advanced Microwave Engineering Srl Name:Oscar Frau Product: LPS UWB 001, LPS UWB 002 Title:Project Handler FCC ID:UKOLPSUWBSignature: MPE limits (§1.1310) ModeFrequencyDuty CyclePower Antenna GainEIRP 1 EIRPDistancePD 2 PD Limit 3 Margin 2.1091 EIRP Limit 2.1091 EIRP MarginPD/PD Limit MHz%dBm dBi dBm mWcm mW/cm^2 mW/cm^2 dBmWdB UWB 4 4012,5100-0,20-0,200,95200,000191,00037,21126031,200,00019 WBT 5 6503,0100-0,30-0,300,93200,000191,00037,31126031,300,00019 1 EIRP = ( Power dBm + Antenna Gain dBi ) + 10 x Log ( Duty Cycle % / 100 ) 2 PD = EIRP / (4xπxD 2 ) 3 CFR 47 Part 1, §1.1310(e), table 1 4 See Report No: 485181-5TRFWL 5 See Report No. 485181-4TRFWL 2.1091 EIRP Limit 1.1307 (b)(3)(i)(C) exemption limit RF Source FrequencyFRλλ/2πR/(λ/2π) Threshold ERP Threshold EIRP Threshold EIRPEIRPMargin MHzMHzmmmWWmWmWdB 4012,50,20 0,075 0,0119 16,8 0,76800 1,260 12600,9531,20 1500-1000006503,00,20 0,046 0,0073 27,2 0,76800 1,260 12600,9331,30

Wireless test report – 485181-4TRFWL Applicant: Advanced Microwave Engineering Srl Via Lucca, 50/54 – 50142 Firenze (FI) – Italy Product name: Sensor for detection ad localization Model: LPS UWB 002 FCC ID: UKOLPSUWB Specifications:  FCC 47 CFR Part 15 Subpart C, §15.250 Intentional radiator Date of issue: November 18, 2022 Tested by P. Barbieri Signature: Reviewed by D. Guarnone Signature: Report reference ID: 485181-4TRFWL Page 2 of 62 Test location(s) Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number 682159 Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Spa ISO/IEC 17025 accreditation. Copyright notification Nemko Spa authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Spa accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: 485181-4TRFWL Page 3 of 62 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test methods ............................................................................................................................................................................................................ 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart F and Subpart C, general requirements test results ................................................................................................................. 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 EUT setup diagram ................................................................................................................................................................................................... 6 3.5 Product description and theory of operation ........................................................................................................................................................... 6 3.6 EUT exercise details .................................................................................................................................................................................................. 6 Section 4. Engineering considerations .................................................................................................................................................................. 7 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 7 4.2 Technical judgment .................................................................................................................................................................................................. 7 4.3 Deviations from laboratory tests procedures ....................................................................…

Text truncated - open the document above for the full version.

Wireless test report – 485181-5TRFWL Applicant: Advanced Microwave Engineering Srl Via Lucca, 50/54 – 50142 Firenze (FI) – Italy Product name: Sensor for detection ad localization Model: LPS UWB 002 FCC ID: UKOLPSUWB Specifications:  FCC 47 CFR Part 15 Subpart F Ultra-Wideband operation  FCC 47 CFR Part 15 Subpart C Intentional radiator Date of issue: November 18, 2022 Tested by P. Barbieri Signature: Reviewed by D. Guarnone Signature: Report reference ID: 485181-5TRFWL Page 2 of 62 Test location(s) Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number 682159 Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Spa ISO/IEC 17025 accreditation. Copyright notification Nemko Spa authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Spa accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: 485181-5TRFWL Page 3 of 62 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test methods ............................................................................................................................................................................................................ 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart F and Subpart C, general requirements test results ................................................................................................................. 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 EUT setup diagram ................................................................................................................................................................................................... 6 3.5 Product description and theory of operation ........................................................................................................................................................... 6 3.6 EUT exercise details .................................................................................................................................................................................................. 6 Section 4. Engineering considerations .................................................................................................................................................................. 7 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 7 4.2 Technical judgment .................................................................................................................................................................................................. 7 4.3 Deviations from laboratory tests procedures .....................…

Text truncated - open the document above for the full version.

For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 44, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 1/4 LPSUWBANT02 Data Sheet Ver. 1.0 Content 1. Overview ................................................................................................................................. 2 2. Main facts .............................................................................................................................. 2 3. Return loss ............................................................................................................................. 2 4. Radiation diagram ................................................................................................................. 3 5. Dimensions ............................................................................................................................ 4 6. Production and quality assurance ....................................................................................... 4 Project: LPSUWBANT02 Requested by: AME Author: Filippo Zani Date: 26/01/2023 Revision Date Author Rev. Note File 26/01/2023 Filippo Zani 1.0 First release For following scope research, development, design, execution, maintenance and after-sales servicing of electronic systems Advanced Microwave Engineering S.r.l. Head Office: Via Lucca 44, 50142 Florence, Italy - C.F/P.IVA/n. iscr. Reg. Impr. di Firenze 05016620485 Capitale sociale: € 99.000 i.v. - T. +39 055 73921 - M. [email protected] - www.ameol.it Pag 2/4 1. Overview The LPSUWBANT02 is the antenna designed for the LPSUWB sensors family. This antenna has been designed to operate in band 2 and 5 for UWB devices. 2. Main Facts Parameter Unit Value Nominal impedance ohm 50 4GHz channel Max Gain dB 3.5 6.5 GHz channel Max Gain dB 2.6 Dish diameter mm 100 4GHz channel Min bandwidth MHz 500 6.5 GHz channel Min bandwidth MHz 500 4GHz channel max return loss dB -9 6.5 GHz channel max return loss dB -8 Connection ND 3 X pre-formed semirigid cable SMA Female (AME code TRPHCAB0201) 3. Return loss For following scope research…

Text truncated - open the document above for the full version.