USE-900710Battery powered smart electronic lock with RFID and Bluetooth

TDS-1095 PaxLock Paxton PaxLock Pro 2 - Mortise The PaxLock Pro 2 - Mortise represents Paxton’s 3rd generation of electronic door handle; offering a robust, featureful and aesthetically pleasing product suitable for a multitude of installations. The new design has been created to be simple to install, intuitive to use and backed up by Paxton’s market leading 5 year warranty. The PaxLock Pro 2 - Mortise offers three modes of operation. It can be used as a standalone offline device, connected to a Net2 system via a Paxton Net2Air bridge, or connected to a Paxton10 system via a Paxton10 Wireless Connector. • Dual frequency reader • Digital privacy button • Suitable for external use (Reader side) • Wireless real-time event reporting • When PaxLock Pro - Mortise is unlocked the handle moves freely • Standalone and online functionality in one unit Overview Features TDS-1095 2 Specifications Battery type4x AA 5 Alkaline Electrical System Communication Bluetooth®* 25 10 Battery life55,000 Operations Wireless Default channel Recommended wireless devices per Net2Air Bridge 2.4GHz (IEEE 802.15.4) 100 card packs (up to 5,000 tokens/users) 10,000 16,000 Door open time Silent operation 1- 60 Seconds Maximum total tokens Maximum total users No Yes Stored events Hands free compatible Door traffic Up to 75 uses per day Low Cloning resistance Token compatibility Paxton standard EM4100/02 MIFARE® HID Prox® Frequency Frequency Frequency Frequency Frequency Data read Data read Data read Data read Data read Cloning resistance Cloning resistance Cloning resistance Cloning resistance Cloning resistance Medium Low Low Low Serial number (CSN) & User memory Serial number (CSN) UID User number/site code 125kHz 125kHz Paxton encrypted 13.56 MHz 13.56 MHz 125kHz AES 128 bit encrypted credential High TDS-1095 3 Lock case Environment Certification Accessories and Sales codes PaxLock Pro 2 - Mortise, Galaxy, black PaxLock Pro 2 - Mortise, Eclipse, black 900-730-US 900-735-US Backset Operating temperature 2-3/4" Reader side: -35°C ~ +66°C Battery side: -0°C ~ +49°C Fire resistance UL10C 3hrs UL294 exterior rated (reader side only) Rotation Moisture resistance Single action egress ≤45° Yes FCC Part 15 ISED UL 294 Tested to ANSI Grade 1 UL10C/ ULC S104      Demo Kit PaxLock Pro - US Demonstration kit, Mortise & Latch900-692-US Hardware Door widths supported Rear handle exit request Low battery warning Colour Yes Yes Black 1-3/4" - 2-1/4" 15m/50ftBluetooth®* AES128 Typical wireless range Encryption TDS-1095 4 128.50 mm 5.06” 39.50 mm 1.56” 21.50 mm 0.85” 44.50 mm 1.75” 43 mm 1.69” 89 mm 3.50” 87.50 mm 3.45” 177 mm 6.97” 126.50 mm 4.98” 130 mm 5.12” 128 mm 5.04” 85 mm 3.35” 47 mm 1.85” 44 mm 1.73” 41.50 mm 1.63” 98.50 mm 3.80” 64.50 mm 2.54” 63 mm 2.48” Dimensions © Paxton Ltd Draft Rev B

TDS-1094 PaxLock Paxton PaxLock Pro 2 - Latch The PaxLock Pro 2 - Latch represents Paxton’s 3rd generation of electronic door handle; offering a robust, featureful and aesthetically pleasing product suitable for a multitude of installations. The new design has been created to be simple to install, intuitive to use and backed up by Paxton’s market leading 5 year warranty. The PaxLock Pro 2 - Latch offers three modes of operation. It can be used as a standalone offline device, connected to a Net2 system via a Paxton Net2Air bridge, or connected to a Paxton10 system via a Paxton10 Wireless Connector. • Dual frequency reader • Digital privacy button • Suitable for external use (Reader side) • Wireless real-time event reporting • When PaxLock Pro - Latch is unlocked the handle moves freely • Standalone and online functionality in one unit Overview Features TDS-1094 2 Specifications Battery type4x AA 5 Alkaline Electrical System Communication Bluetooth®* 25 10 Battery life55,000 Operations Wireless Default channel Recommended wireless devices per Net2Air Bridge 2.4GHz (IEEE 802.15.4) 100 card packs (up to 5,000 tokens/users) 10,000 16,000 Door open time Silent operation 1- 60 Seconds Maximum total tokens Maximum total users No Yes Stored events Hands free compatible Door traffic Up to 75 uses per day Low Cloning resistance Token compatibility Paxton standard EM4100/02 MIFARE® HID Prox® Frequency Frequency Frequency Frequency Frequency Data read Data read Data read Data read Data read Cloning resistance Cloning resistance Cloning resistance Cloning resistance Cloning resistance Medium Low Low Low Serial number (CSN) & User memory Serial number (CSN) UID User number/site code 125kHz 125kHz Paxton encrypted 13.56 MHz 13.56 MHz 125kHz AES 128 bit encrypted credential High TDS-1094 3 Environment Certification Accessories and Sales codes PaxLock Pro 2 - Latch, Galaxy, black, 2-3/8" backset PaxLock Pro 2 - Latch, Galaxy, black, 2-3/4" backset PaxLock Pro 2 - Latch, Eclipse, black, 2-3/8" backset PaxLock Pro 2 - Latch, Eclipse, black, 2-3/4" backset 900-710-US 900-720-US 900-715-US 900-725-US Operating temperature Reader side: -35°C ~ +66°C Battery side: -0°C ~ +49°C Fire resistance UL10C 3hrs UL294 exterior rated (reader side only) Moisture resistance FCC Part 15 ISED UL 294 Tested to ANSI Grade 1 UL10C/ ULC S104      Demo Kit 900-692-USPaxLock Pro 2 - Latch & Mortise demonstration kit Hardware Door widths supported Rear handle exit request Low battery warning Colour Yes Yes Black 1-3/8" - 2-1/4" Lock case Backset2-3/8” 2-3/4” Rotation ≤45° 15m/50ftBluetooth®* AES128 Typical wireless range Encryption TDS-1094 4 70 mm 2.76” 64 mm 2.52” 37 mm 1.46” 24 mm 0.94” 44.50 mm 1.75” 44.50 mm 1.75” 86 mm 3.39” 87 mm 3.43” 134 mm 5.28” 127 mm 5.00” 87.50 mm 3.45” 47 mm 1.85” 42 mm 1.65” 128.50 mm 5.06” 128.50 mm 5.06” Dimensions © Paxton Ltd Draft Rev B

1 https://paxton.info/9991 PaxLock INS-30239 Online instructions Instructions en ligne Instrucciones en línea 2 900-730-US / 900-735-US 3 Ø3/8"Ø1/2" Ø3/4" Ø1"Ø1 1/4" PH2PH2 4 j k a d e h i g b c f 5 o m n p q AA AA AA AA r s t u v w x l 6 a https://paxton.info/9997 1 Select the door prep sheet according to the door thickness and prepare the door for the Lockset and Paxlock Pro 2. Sélectionnez la feuille de préparation de la porte se- lon l’épaisseur de la porte et préparez la porte pour l’ensemble de serrure et PaxLock Pro 2. Seleccione la hoja de preparación de la puerta según el espesor de la puerta y utilícela para preparar la puerta para el Lockset y el PaxLock Pro 2. FR ES 7 b c #7-32 x 29/32" 2 8 d e f #1-4 x 11/8" 3 9 L R g 4 10 L/R Door handing Sens d’ouverture de la porte Sentido de apertura de la puerta FR ES 5 11 i h m3 x 5/16" m4 x 1/2" 6 12 j k 1-3/4" 2" 2-1/4" 7 Reconfigure part according to the door thickness Sélectionnez en fonction de l’épaisseur de la porte Seleccione según el espesor de la puerta FR ES 13 j k 8 14 9 15 90º<90º 10 Ensure the spindle is square to the door whilst fitting the battery side. Assurez-vous que la tige carrée est bien alignée avec la porte lors de la mise en place du côté batterie.. Assurez-vous que la tige carrée est bien alignée avec la porte lors de la mise en place du côté batterie. ! FR ES 16 n o l 10a m Follow this step for door thickness 1-3/4 - 2" Suivez cette étape pour une épaisseur de porte de 1-3/4-2" Siga este paso para un espesor de puerta de 1-3/4-2" FR ES Insert key halfway. Insérez la clé à mi-course. Introduzca la llave hasta la mitad. ! FR ES 17 10b n l m Follow this step for door thickness 2 - 2-1/4" Suivez cette étape pour une épaisseur de porte de 2 - 2-1/4" Siga este paso para un espesor de puerta de 2 - 2-1/4" FR ES Insert key halfway. Insérez la clé à mi-course. Introduzca la llave hasta la mitad. ! FR ES 18 ! Secure and ensure the key cylinder is installed with key sitting at the bottom, as shown. Verrouillez le cylindre et assurez-vous que la clé est bien en place, en position basse, comme indiqué. Fije el cilindro y asegúrese de que esté instalado con la llave en la posición inferior, tal como se muestra. FR ES 11 19 12 ! Tighten screw to secure key cylinder in place. Serrez la vis pour fixer le cylindre de clé en place. Apriete el tornillo para asegurar el cilindro de la llave en su lugar. FR ES 20 p q 1-3/4 - 2" 2 - 2-1/4" 13 Select part according to door thickness Sélectionnez en fonction de l’épaisseur de la porte Seleccione según el espesor de la puerta FR ES 1:1 21 14 22 If using a drill, use a low torque setting (≤2) to avoid damage. Si vous utilisez une perceuse, réglez-la sur un couple faible (≤2) pour éviter tout dommage. Si utiliza un taladro, utilice un ajuste de par bajo (≤2) para evitar daños. ! p q FR ES 15 23 16 24 17 25 r 18 26 s m4 x 3/4" 19 27 2 1 20 28 t 21 29 v u #4-24 x ½" 22 30 x w #6-32 x 9/32" 23 31 32 1..2..3 Reset unit Réinitialiser l’unité Restablecer unidad FR ES 33 https://paxton.info/9926https://paxton.info/9927https://paxton.info/9989 34 https://paxton.info/9988 35 ≤ 50000 ≤ 10mm IEEE 802.15.4 Bluetooth® Low energy technology -35 ̊C - +66 ̊C -31 ̊F - 151 ̊F -0 ̊C - +49 ̊C -32 ̊F - 120 ̊F 4 x AA Alkaline 3m - 15m 10ft - 65ft 1.38” - 2.24” 35 - 62mm 6V 800mA 36 These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. For further compliance information see ins-01000 at: http://paxton.info/3011 UL listed to the following standards: ANSI/UL 10C compliant (180 min fire doors), CAN/ULC S104 compliant (180 min fire doors) Contact details are provided at: http://paxton.info/596 UL 294 performance level table: To confirm Software version please refer to the P10 server. Software updates not evaluated by UL FeatureLevel Destructive Attack2 Line Security1 Endurance4 Standby Power1 Single Point Locking Device with Key Locks1 Product compliance and limitations Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this de- vice may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 37 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Class B digital devices. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This Class B digital …

Text truncated - open the document above for the full version.

1 https://paxton.info/9990 Online instructions Instructions en ligne Instrucciones en línea PaxLock INS-30238 2 900-710-US/ 900-715-US/ 900-720-US/ 900-725-US 3 AAAAAAAA b c For #8-32 screw 4 Ø2-1/8" Ø1"Ø3/8" Ø5/16" PH2 PH2 5 Select the door prep sheet according to the door thickness and prepare the door for the Lockset and Paxlock Pro 2. Sélectionnez la feuille de préparation de la porte en fonction de l’épaisseur de la porte et préparez la porte pour l’ensemble de serrure et PaxLock Pro 2. Seleccione la hoja de preparación de la puerta según el espesor de la puerta y prepare la puerta para el Juego de cerradura y PaxLock Pro 2. FR ES a https://paxton.info/9987 1 6 #8-32 x 3/4" b c 2 7 e Select part according to door thickness Sélectionnez la pièce en fonction de l’épaisseur de la porte Seleccione la pieza según el espesor de la puerta e f f d FR ES 1-3/4" 2 - 2-1/4" 3 8 Arrow facing up Flèche vers le haut Flecha hacia arriba ! FR ES 4 9 #12-24 x 15/16" g h 5 10 6 j i 11 7 12 L/R Choose handing and fit the handle into the handle connector whilst keeping the key horizontal. Choisissez le sens de la porte et insérez la poignée dans le con- necteur de poignée tout en gardant la clé horizontale. Elija sentido de apertura y ajuste el tirador en el conector del tirador mientras mantiene la llave horizontal. FR ES 8 13 1 2 Turn the key clockwise and push until you hear a click. Tournez la clé dans le sens des aiguilles d’une montre et poussez jusqu’à entendre un clic. Gire la llave en el sentido de las agujas del reloj y empuje hasta que escuche un clic. FR ES 9 14 k k 1-3/4 - 2-1/4" 1-3/8" 10 Reconfigure part according to the door thickness Reconfigurer la pièce en fonction de l’épaisseur de la porte Reconfigure la pieza según el espesor de la puerta FR ES 15 k 11 16 l 12 17 13 18 1-3/8" 1-3/4" 2 - 2-1/4" 1:1 m n o 14 Select part according to door thickness Seleccione la pieza según el espesor de la puerta Seleccione según el espesor de la puerta FR ES 19 15 20 If using a drill, use a low torque setting (≤2) to avoid damage. Si vous utilisez une perceuse, utilisez un réglage de couple faible (≤2) pour éviter tout dommage. Si usa un taladro, use una configuración de bajo torque (≤2) para evitar daños. ! m no FR ES 16 21 17 22 18 23 p 19 24 q m4 x 13/16" 20 25 2 1 21 26 r 22 27 28 1..2..3 Reset unit Réinitialiser l’unité Restablecer unidad FR ES 29 https://paxton.info/9926https://paxton.info/9927https://paxton.info/9986 30 https://paxton.info/9985 31 ≤ 50000 ≤ 10mm Bluetooth® Low energy technology 4 x AA Alkaline 10ft - 65ft 3m - 15m 35 - 62mm 1-3/8" - 2-1/4" 6V 800mA -35 ̊C - +66 ̊C -31 ̊F - 151 ̊F -0 ̊C - +49 ̊C -32 ̊F - 120 ̊F 32 These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. For further compliance information see ins-01000 at: http://paxton.info/3011 UL listed to the following standards: ANSI/UL 10C compliant (180 min fire doors), CAN/ULC S104 compliant (180 min fire doors) Contact details are provided at: http://paxton.info/596 UL 294 performance level table: To confirm Software version please refer to the P10 server. Software updates not evaluated by UL FeatureLevel Destructive Attack2 Line Security1 Endurance4 Standby Power1 Single Point Locking Device with Key Locks1 Product compliance and limitations Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the follow- 33 ing two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Class B digital devices. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. 34 Bluetooth® smart credenitals Credential Transmission technologyBluetooth® Bluetooth versionBluetooth 5.0 LE Application software versionV1 SR1 User VerificationUser must activate pin or biometric security on smart devices used as a credential. Verification of credential typeThe Paxton10 software reports feature can be used to view system events and verify the credential type. Limitation of useThe smart device used as a Bluetooth credential is not capable of command, control, programming or any other system manipulation The Bluetooth credential is used in the same manner as a physical credentia…

Text truncated - open the document above for the full version.

TÜV SÜD is a trading name of TUV SUD Ltd Registered in Scotland at East Kilbride, Glasgow G75 0QF, United Kingdom Registered number: SC215164 TUV SUD Ltd is a TÜV SÜD Group Company Phone: +44 (0) 1489 558100 Fax: +44 (0) 1489 558101 www.tuvsud.com/en TÜV SÜD Octagon House Concorde Way Fareham Hampshire PO15 5RL United Kingdom TÜV SÜD Roxtra 328983 DIVPS Main V5 SIGNATURE NAME JOB TITLE RESPONSIBLE FOR ISSUE DATE Steve Marshall Senior Engineer Authorised Signatory 25 August 2026 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD document control rules. RESPONSIBLE FOR NAME DATE SIGNATURE Testing Ahmad Javid 25 August 2026 FCC Accreditation: 492497/UK2010 Octagon House, Fareham Test Laboratory ISED Accreditation: 12669A/UK0003 Octagon House, Fareham Test Laboratory EXECUTIVE SUMMARY / ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on the test pages A sample of this product was tested to demonstrate limited compliance with FCC 47 CFR Part 15C 2024, ISED RSS-210 Issue 11 (06-2024) and ISED RSS-GEN: Issue 05 (2018-04) + A2 (2021-02) for the tests detailed in section 1.3. The sample tested was found to comply with the requirements defined in the applied rules. FCC and ISED Test Report Paxton Access Ltd Paxlock Pro 2 – Mortice Eclipse, Model: 900-735 In accordance with FCC 47 CFR Part 15C and ISED RSS-210 and ISED RSS-GEN Technology: (RFiD) Prepared for: Paxton Access Ltd Paxton House Home Farm Road Brighton, BN1 9HU FCC ID: USE-900710 IC ID: 10217A-900710 COMMERCIAL-IN-CONFIDENCE Document 75966453-04 Issue 03 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD. No part of this document may be reproduced without the prior written approval of TÜV SÜD. © 2026 TÜV SÜD. This report relates only to the actual item/items tested. ACCREDITATION Our UKAS Accreditation does not cover opinions and interpretations and any expressed are outside the scope of our UKAS Accreditation. Results of tests not covered by our UKAS Accreditation Schedule are marked NUA (Not UKAS Accredited). Results of tests covered by our Flexible UKAS Accreditation Schedule are marked FS (Flexible Scope). Test Report - Document 75966453-04 Issue 03 COMMERCIAL-IN-CONFIDENCE Page 1 of 41 Contents 1 Report Summary .........................................................................................................................2 1.1 Report Modification Record ...........................................................................................................2 1.2 Introduction ....................................................................................................................................2 1.3 Brief Summary of Results .............................................................................................................3 1.4 Customer Supplied Form ..............................................................................................................4 1.5 Manufacturer’s Declared Variants .................................................................................................8 1.6 Product Information .......................................................................................................................9 1.7 Deviations from the Standard ........................................................................................................9 1.8 EUT Modification Record ..............................................................................................................9 1.9 Test Location .................................................................................................................................9 2 Test Details ............................................................................................................................... 10 2.1 20 dB Bandwidth & 99% Occupied Bandwidth .......................................................................... 10 2.2 Frequency Tolerance Under Temperature Variations ................................................................ 16 2.3 Field Strength of any Emission .................................................................................................. 19 2.4 Field Strength of any Emission .................................................................................................. 30 3 Photographs ............................................................................................................................. 39 4 Measurement Uncertainty ....................................................................................................... 41 Test Report - Document 75966453-04 Issue 03 COMMERCIAL-IN-CONFIDENCE Page 2 of 41 1 Report Summary 1.1 Report Modification Record Alterations and additions to this report will be issued to the holders of each copy in the form of a complete document. Issue Description of Change Date of Issue 01 First version 26-Jun-2026 02 Updated Introduction (1.2) in Report Summary 10-Aug-2026 03 Updated FCC ID to USE-900710 25-Aug-2026 Table 1 1.2 Introduction Applicant Paxton Access Ltd Manufacturer Paxton Access Ltd Model Number(s) 900-735 Hardware Version Identification Number (HVIN) 900-735 Serial Number(s) 9128133ND Hardware Version(s) z-lm02 & z-lmb1 – ppc-lm02 & ppc-lmb1 Firmware Version Identification Number (FVIN) 3.45 Number of Samples Tested 1 Test Specification/Issue/Date FCC 47 CFR Part 15C: 2024 ISED RSS-210: Issue 11 (06-2024) ISED RSS-GEN: Issue 05 (2018-04) + A2 (2021-02) Order Number Date 240252 26-March-2026 Date of Receipt of EUT 13-May-2026 Start of Test 19-May-2026 Finish of Test 21-May-2026 Name of Engineer(s) Ahmad Javid Related Document(s) ANSI C63.10-2020 +Cor.1-2023+C63.10a-2024 Test Report - Document 75966453-04 Issue 03 COMMERCIAL-IN-CONFIDENCE Page 3 of 41 1.3 Brief Summary of…

Text truncated - open the document above for the full version.

TÜV SÜD is a trading name of TUV SUD Ltd Registered in Scotland at East Kilbride, Glasgow G75 0QF, United Kingdom Registered number: SC215164 TUV SUD Ltd is a TÜV SÜD Group Company Phone: +44 (0) 1489 558100 Fax: +44 (0) 1489 558101 www.tuvsud.com/en TÜV SÜD Octagon House Concorde Way Fareham Hampshire PO15 5RL United Kingdom TÜV SÜD SIGNATURE NAME JOB TITLE RESPONSIBLE FOR ISSUE DATE Andrew Lawson Chief Engineer, EMC Authorised Signatory 10 August 2026 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD document control rules. ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC 47 CFR Part 15B and ICES-003. The sample tested was found to comply with the requirements defined in the applied rules. RESPONSIBLE FOR NAME DATE SIGNATURE Testing Abarajitha Karunakaran 10 August 2026 Sreemon Jayachandran Nair 10 August 2026 FCC Accreditation 492497/UK2010 Octagon House, Fareham Test Laboratory ISED Accreditation 12669A/UK0003 Octagon House, Fareham Test Laboratory EXECUTIVE SUMMARY A sample of this product was tested and found to be compliant with FCC 47 CFR Part 15B and ICES-003: 2024 and Issue 7: 2020 for the tests detailed in section 1.3. FCC and ISED Test Report Paxton Access Ltd Paxlock Pro 2 – Latch Galaxy, Model: 900-720 In accordance with FCC 47 CFR Part 15B and ICES-003 Prepared for: Paxton Access Ltd Paxton House Home Farm Road Brighton BN19HU FCC ID: USE 900710 IC ID: 10217A-900710 COMMERCIAL-IN-CONFIDENCE Document 75966453-01 Issue 02 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD. No part of this document may be reproduced without the prior written approval of TÜV SÜD. © 2026 TÜV SÜD. This report relates only to the actual item/items tested. ACCREDITATION Our UKAS Accreditation does not cover opinions and interpretations and any expressed are outside the scope of our UKAS Accreditation. Results of tests not covered by our UKAS Accreditation Schedule are marked NUA (Not UKAS Accredited). Results of tests covered by our Flexible UKAS Accreditation Schedule are marked FS (Flexible Scope). Document 75966453-01 Issue 02 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 1 of 25 Contents 1 Report Summary ......................................................................................................................... 2 1.1 Report Modification Record ........................................................................................................... 2 1.2 Introduction .................................................................................................................................... 2 1.3 Brief Summary of Results ............................................................................................................. 3 1.4 Declaration of Build Status ............................................................................................................ 4 1.5 Manufacturer Declared Variants ................................................................................................... 5 1.6 Product Information ....................................................................................................................... 6 1.7 Deviations from the Standard ........................................................................................................ 7 1.8 EUT Modification Record .............................................................................................................. 8 1.9 Test Location ................................................................................................................................. 8 2 Test Details .................................................................................................................................. 9 2.1 Radiated Emissions ....................................................................................................................... 9 2.2 Radiated Magnetic Emissions ..................................................................................................... 17 3 Test Equipment Information .................................................................................................... 23 3.1 General Test Equipment Used .................................................................................................... 23 4 Incident Reports ........................................................................................................................ 24 5 Measurement Uncertainty ........................................................................................................ 25 Document 75966453-01 Issue 02 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 2 of 25 1 Report Summary 1.1 Report Modification Record Alterations and additions to this report will be issued to the holders of each copy in the form of a complete document. Issue Description of Change Date of Issue 01 First Issue 29-Jun-2026 02 Updated Introduction (1.2) in Report Summary 10-Aug-2026 Table 1 1.2 Introduction Applicant Paxton Access Ltd Manufacturer Paxton Access Ltd Model Number(s) 900-720 Hardware Version Identification Number (HVIN) 900-720 Serial Number(s) 9128232HY Hardware Version(s) z-lm02 & z-lmb1 – ppc-lm02 & ppc-lmb1 Firmware Version Identification Number (FVIN) 3.45 Number of Samples Tested 1 Test Specification/Issue/Date FCC 47 CFR Part 15B and ICES-003: 2024 and Issue 7: 2020 Order Number Date 240252 03-December-2025 Date of Receipt of EUT 03-October-2025 and 13-May-2026 Start of Test 14-May-2026 Finish of Test 15-May-2026 Name of Engineer(s) Abarajitha Karunakaran and Sreemon Jayachandran Nair Related Document(s) ANSI C63.4: 2014 Document 75966453-01 Issue 02 COMMERCIAL-I…

Text truncated - open the document above for the full version.

Bezeichnung : description : size3,2 x 1,6 A3,2 ± 0,2mm B1,6 ± 0,2mm C1,3 +0,1/-0,2mm D0,5 ± 0,3mm Feeding Point NC Eigenschaften / properties Wert / valueEinheit / unittol. Fre quenzbereich/ frequency range VSWR VSWR Im pedanz / impedance Antennengewinn / peak gain Antennengewinn / average gain Keramik / cer…

Text truncated - open the document above for the full version.