UTW-XG100ARUGGED MOBILE COMPUTER

XG Series Quick Start Guide ™ 022510 XGabgFScom.1 Purpose-Built Technology. ® Janam XG.abg Quick Start Guide XG Series Quick Start Guide Copyright 2010 Janam Technologies LLC. All rights reserved. XG Series, XG100, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective ownersJanam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. Be sure to make backup copies of all important data on other media to protect against data loss.Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions contact Janam. For a copy of the Product User Guide, visit the online Resource Center at www.janam.com.Important: Please read the End User License Agreement with this product before using the device or accompanying software program(s). Using the device or any part of the software indicates that you accept the terms of the End User License Agreement.For additional product information, visit www.janam.com or call +1.877.JANAM.99 1 Janam XG.abg Quick Start Guide To help you get started with your XG Series mobile computer, this guide features: - Hardware Overview - Getting Started - Regulatory Information For additional product details, visit www.janam.com.For software updates and information, visit www.microsoft.com. Content and Additional Resources 2 Janam XG.abg Quick Start Guide Hardware Overview 1. Power2. Right Function Key3. Microphone4. Front Indicator Lights LED5. LCD6. Navigation7. Left Function Key8. Escape/Clear9. Indicator Light LED10. Syncing/Charging Connector11. Space12. Green Control Shift13. Enter14. Blue Function Shift15. Backspace16. Orange Function Shift17. Indicator Light LED 3 5 89 6 4 7 12 1 2 3 10 11 13 15 16 14 17 For keypad variations, please visit the Resource Center at www.janam.com Janam XG.abg Quick Start Guide Hardware Overview 1. Scan Window2. Scan Trigger Button3. Handle/Battery Chamber4. Base of Battery & Battery Release Plunger 5. Lanyard Connector6. Speaker7. Memory Card Door8. Memory Card Door Screws9. Rear Indicator Lights (Tail Lights)10. Syncing/Charging Connector 2 5 1 4 3 9 6 10 5 7 8 4 Janam XG.abg Quick Start Guide Getting Started A. INSTALLING THE BATTERY 1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1). Do not force past point of resistance.2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2). This aligns the battery notches with the battery chamber which is required to insert the battery.3. Once the battery is properly aligned with the handle, press the battery into the battery chamber.4. Rotate the battery base clockwise until the base of the battery is parallel with the device. The battery release plunger will click and lock the battery into place (Figure 3). B. REMOVING THE BATTERY 1. To remove the battery, fully press the battery release plunger and hold while rotating the battery counter-clockwise until it stops (battery base will be perpendicular to device handle). 2. Grip the battery base and pull battery from battery chamber. 5 BATTERY Figure 1 Perpendicular Figure 2 Battery Release Plunger Parallel Figure 3 Base of Battery Janam XG.abg Quick Start Guide Getting Started C. CHARGING THE BATTERY Important Note: The main battery charges the backup battery in the device. Once the main battery is fully charged, do not remove it from the unit for 24 hours. During this period, the device cannot maintain any user data if the battery is removed.To charge the battery using the USB Cable or Serial Cable : 1. Connect the power supply to the USB or serial cable.2. Connect snap-on end of USB or serial cable to syncing/charging connector at the bottom of device (Hardware Overview #10) making sure the JANAM logo on the connector faces front. 3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are easily reached with the length of supplied power cable. To charge the battery using the Single-Slot or Four-Slot Cradle : 1. Connect the power supply to the cradle.2. Connect the line cord to the power supply.3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are easily reached with the length of supplied power cable. 4. Place the device in cradle. The LED will illuminate to con fi rm connection (orange indicates charging, green indicates fully charged and red indicates fault). 5. The battery is fully charged in approximately 5 hours.6. For Single-Slot cradle only: Charge a spare battery by placing the battery in the spare battery well with connectors lined up. An LED will illuminate to con fi rm connection. 6 Janam XG.abg Quick Start Guide D. CALIBRATING THE SCREEN The fi rst time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen instructions using the stylus to tap the exact center of each target. Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear. E. LCD BACKLIGHT ADJUSTMENT To adjust LCD backlight, tap the following sequence: Start > Settings > Control Panel > Display > Backlight > Advanced , then adjust on-screen slider with stylus or use the navigation arrow keys. Getting Started 7 Janam XG.abg Quick Start Guide 8 Regulatory Information Regulatory InformationRegulatory reference number: Model number XG100 All devices are designed to comply with local rules and regulations of the countries they are shipped to. Any changes or modi fi cations made without Janam’s approv…

Text truncated - open the document above for the full version.

IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 PHOTOGRAPHS OF EUT IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All of EUT Front View of EUT IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT-1 IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung …

Text truncated - open the document above for the full version.

PREPARED BY NICK, R&D, 23APRIL2009 BACK HOUSING - UPDATED REGULATORY LABEL DETAILS LASER LIGHT - DO NOT STARE INTO BEAMLASER LIGHT - DO NOT STARE INTO BEAM LE FAISEAU APPARIEL à LASER DE CLASSE 2 CLASS 2 LASER PRODUCT 1.0mW-630-680nm LASERLICHT - NICHT IN DEN STRAHL BLICKEN LASER KLASSER 2 LUMIèRE LASER - NE PAS REGARDER DANS COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 BACK HOUSING BACK VIEW THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003 CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU CANADA N16679 IC : 6914A-XG100A FCC ID :UTW-XG100A Janam Technologies Woodbury NY 11797 0890 LISTED I.T.E. E311709 S / N : 0 6 1 0 2 0 1 0 0 6 4 5 0 0 0 1 0 1 Janam Technologies LLC P/N:XG100W-LBGDBT00 Imager ID:01199A2456 Model:XG100 MAC Addr:0016D3204505 Made in Indonesia RoHS Removal of Windows Logo Re-alignment of text and regulatory logos Code added Janam Address Added 1. UL Control No. 2. SCT logo removed 3. NOM logo removed 4. RoHS Added Made in Indonesia to replace Made in the Philippines

IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 1 Open View of EUT – 2 IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 3 Internal of EUT – 1 BT Antenna WLAN Antenna IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal of EUT – 2 Internal of EUT – 3 IC: 6914A-XG100A FCC ID: UTW-XG100A Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized altera- tion, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : ES/2009/C0013 Page : 1 of 48 SAR TEST REPORT Equipment Under Test Rugged Mobile Computer Model Number XG100 Company Name Janam Technologies LLC Company Address 100 Crossways Park West Suite 105 Woodbury, NY 11797 Date of Receipt 2009.12.16 Date of Test(s) 2010.02.01 Date of Issue 2010.02.04 Standards: FCC OET 65 supplement C, IEEE/ANSI C95.1 , C95.3, IEEE 1528; RSS102 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in writing. Tested by : Ricky Huang Date : 2010.02.04 Asst. Supervisor Approved by : Robert Chang Date : 2010.02.04 Tech Manager Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : ES/2009/C0013 Page : 2 of 48 Contents 1. General Information .............................................................................. 3 1.1 Testing Laboratory......................................................................... 3 1.2 Details of Applicant........................................................................ 3 1.3 Description of EUT......................................................................... 3 1.4 Test Environment .......................................................................... 6 1.5 Operation description..................................................................... 6 1.6 The SAR Measurement System ....................................................... 7 1.7 System Components ...................................................................... 8 1.8 SAR System Verification ................................................................10 1.9 Tissue Simulant Fluid for the Frequency Band .................................11 1.10 EVALUATION PROCEDURES ........................................................12 1.11 Test Standards and Limits ...........................................................13 2. Summary of Results .............................................................................16 3. Instruments List...................................................................................17 4. Measurements .....................................................................................18 5. SAR System Performance Verification ....................................................24 6. DAE & Probe Calibration certificate........................................................26 7. Uncertainty Analysis .............................................................................3…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : ES/2009/C0013-01 Page : 1 of 39 SAR TEST REPORT Equipment Under Test Rugged Mobile Computer Model Number XG100 Company Name Janam Technologies LLC Company Address 100 Crossways Park West Suite 105 Woodbury, NY 11797 Date of Receipt 2009.12.16 Date of Test(s) 2010.02.01 Date of Issue 2010.03.19 Standards: FCC OET 65 supplement C, IEEE/ANSI C95.1 , C95.3, IEEE 1528; RSS102 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in writing. Tested by : Ricky Huang Date : 2010.03.19 Asst. Supervisor Approved by : Robert Chang Date : 2010.03.19 Tech Manager Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : ES/2009/C0013-01 Page : 2 of 39 Contents 1. General Information .............................................................................. 3 1.1 Testing Laboratory......................................................................... 3 1.2 Details of Applicant........................................................................ 3 1.3 Description of EUT......................................................................... 3 1.4 Test Environment .......................................................................... 5 1.5 Operation description..................................................................... 5 1.6 The SAR Measurement System ......…

Text truncated - open the document above for the full version.