UU8-TWV10Rechargeable Video Walkie Talkie

II 1. When the product leaves the factory, the power disconnect switch is in the "OFF" position. 2. As shown in the figure, pushing the button upward will turn on the device, and pushing it downward will turn it off. 3. Please fully charge the product before using it for the first time. III、 Charging indicator 1. Take the local charging cable, connect the charger, and the power indicator light "red light" will turn on. When fully charged, the charging indicator light will automatically turn off. 2. Charger adaptation specifications: 5V/1A. IV、 Function description 1. Turn the power switch to the "ON" state, the machine will automatically turn on and display our own camera.When the other party's walkie talkie is turned on, both parties will automatically connect and display each other's image. 、 Power on/off function 2 1 3 4 5 6 7 9 8 10 11 M Rechargeable Video Walkie Talkie USER`S MANUAL OFF ON Power OFF Power ON 2.0 Inch IPS 30W 3.7V 650mAh English Type-C -20°C～60°C -30°C～70°C 5V/1.0A 124mm*54mm*23mm V、Product specifications Made in China 12 Appearance and functional descriptionI、 1-Camera conversion/ voice change button 2-Antenna 3-Camera 4-Display screen 5-Increase the volume 6-Volume reduction 7-Power switch 8-MIC hole 9-Intercom key 10-Type-C interface 11-Charging indicator light 12-Rope hole 2. Press and hold the " " button to initiate voice communication. The local voice is transmitted through a one-way channel, and only when the speaker releases the intercom button can the other party press and hold the intercom button to send the voice message. 3. Image display conversion key "M": This device has four screen display modes. 4. Volume adjustment: Short press the "+" button to increase the volume. Short press the "-" key to decrease the volume. 5. Voice changing function: Press and hold the "M" key for 2 seconds, then release it to switch to voice mode. After shutting down,the voice change mode returns to the original sound mode. 6. Product power on/off and automatic shutdown function: This product enters the working state after being turned on. Regardless of whether it is used or not, it will always be in working condition. When the product is in a low power state, it will automatically shut down. If you stop using it, please turn the power switch to the "OFF" state. If you need to restart the product, simply turn the power to "OFF" and then to "ON" to start it normally. 7. Product pairing and connection methods: This product adopts WIFI 2.4G transmission and connection mode. Each package contains two walkie talkies that have been paired and cannot be connected to other machines for use. If multiple sets of products are purchased, they can only be connected one-to-one in sets and cannot be used simultaneously. 8. Precautions: a, This product is suitable for outdoor use. b, This machine is not waterproof. c, The indoor distance of the product shall be based on the image without any lag. Screen CMOS pixel Batter y capacity Language USB Port Operate TEMP Storage TEMP Power Product size 123 456 Other side image Own side image Own side image Other side image Other side image Own side image This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. SAR WARNING Specific Absorption Rate (SAR) information The SAR limit of USA(FCC) is 1.6 W/kg averaged over one gram of tissue. This model (FCC ID: UU8-TWV10) has also been tested against this SAR limited. The highest SAR value reported under this standard during product certification for use at the body is 0.588 W/kg. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your head/body.

Page: 1/10 Ref : ACR.78.3.26.PAR.A BTF TESTING LAB (SHENZHEN) CO., LTD. F101,201 AND 301, BUILDING 1, BLOCK 2, TANTOU INDUSTRIAL PARK, TANTOU COMMUNITY SONGGANG STREET, BAO'AN DISTRICT, SHENZHEN, CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0125-EPGO-445 Calibrated at MVG 13 Rue du Zephyr 91140 Villejust - FRANCE Calibration date: 03/03/2026 Scope available on :https://a2la.org/ Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 3/18/2026 Checked & approved by: Pedro Ruiz Technical Manager 3/18/2026 Authorized by: Christophe Barrot Quality Manager Customer Name Distribution : BTF Testing Lab (Shenzhen) Co., Ltd. Issue Name Date Modifications A Pedro Ruiz 3/18/2026 Initial release Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 2026 March 19 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 4 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0125-EPGO-445 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.206 M Dipole 2: R2=0.207 M Dipole 3: R3=0.226 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. 3.2 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.3 ISOTROPY The axial isotropy was evaluate…

Text truncated - open the document above for the full version.

Report No.: TZ0035260450PH01 Page 1 of 2 Test Setup Photos of the EUT Conducted Emission Radiated Emission Below 1GHz Report No.: TZ0035260450PH01 Page 2 of 2 Radiated Emission Above 1GHz RF Conducted Test

深圳旭航通讯科技有限公司 ShenzhenXuhangCommunication 规格承认书 客户 CUSTOMER 客户料号 CUSTOMERNO. 供方品名 PARTNAME WIFI天线 规格名称 SUPPLIERNO. 客户确认 CUSTOMERAPPROVEDBY 检验 APPROVAL 审核 CHIEF 批准 SUPERVISOR 设计 DESIGN 审核 CHECK 批准 APPROVAL LuoRobertSHANG Date:June18,2025 DIRECTORY NO.ContentsNumber ofPage PageCode 1SpecCover11 2DIRECTORY12 3TestReports13 4MatchingCircuits14 5DRAWING15 6TestData36-9 7 Antennaassemblyposition 110 电性测试报告 TEST REPORTS 频率 Frequency WIFI(2400~2500MHz) 阻抗 Impedance 50 0hm Nominal 驻波比 V.S.W.R ＜2.0 回波损耗 ReturnLoss -10dB Max 辐射 Radiation Omni-directional 增益 Gain(Peak) 0.0dBi 极化方式 Polarization Linear,Vertical 功率 AdmittedPower 1W 连接器 Connector PhysicalProperties 天线材质 AntennaMaterial FPC 线材类型 Cable Type O.D. 1.13 mm 工作温度 OperatingTemp. -10-+60°C 存储温度 StorageTemp. -10-+70°C 线材颜色 Cable Color Black 匹配电路 MatchingCircuits 匹配电路 Theoriginalmatchingcircuithasnotbeenmodified DRAWING 2. 天线效率与 增益 Passive Test For WIFI2.4 I Freq Effi Gain （腼Iz) （%） (dBi) 2400 53.24 -0.65 2410 51. 94 -0. 7 2420 50.81 -0.66 2430 50.26 一0.71 2440 51. 83 -0.55 2450 54.02 -0.35 2460 53.06 一0.37 2470 52.93 -0.32 2480 52.5 -0.33 2490 53.79 o 2500 52.96 -0. 18 2400.000MHz 2400.000MHz E1 H 罔 且 ，，‘ MH Mnu nu nu nU M 唰 q4 I 8.7 』 ’0.7 2400.000MHz E2 70 2500.000MHz 70 2500.000MHz E1 1.00 70 .o 2 70 2500.000MHz E2 1.00 '70 '70 无源驻波 Standingwaveloss 天线安装位置 Antennaassemblyposition

Report No.:TZ0035260450FRF03 Page 1 of 35 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0035260450FRF03 Product Name : Rechargeable Video Walkie Talkie Model/Type reference : TWV10 FCC ID : UU8-TWV10 Prepared for : Lexibook America C/O Pramex International, 1251 Avenue of the Americas, 3rd Fl., New York, United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 + Cor.1-2023 Date of Test : 2026-06-01 ~ 2026-06-18 Date of Issue : 2026-06-22 Prepared by : Lena Wen Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.:TZ0035260450FRF03 Page 2 of 35 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2026-06-22 Valid Initial release Report No.:TZ0035260450FRF03 Page 3 of 35 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ....................................................... 4 1.1. Clien6t Information ................................................................................................................. 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 5 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 1.9. Frequency of Channels .......................................................................................................... 7 2. T E S T M E T H O D O L O G Y ............................................................ 8 2.1. EUT Configuration .................................................................................................................. 8 2.2. EUT Exercise ........................................................................................................................... 8 2.3. Test Sample ............................................................................................................................. 8 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 9 3.1. Justification ............................................................................................................................. 9 3.2. EUT Exercise Software ........................................................................................................... 9 3.3. Special Accessories ............................................................................................................... 9 3.4. Block Diagram/Schematics .................................................................................................... 9 3.5. Equipment Modifications ....................................................................................................... 9 3.6. Test Setup ................................................................................................................................ 9 4. S U M M A R Y O F T E S T R E S U L T S ............................................... 10 5. T E S T R E S U L T .................................................................... 11 5.1. On Time and Duty Cycle ....................................................................................................... 11 5.2. Maximum Conducted Output Power Measurement ........................................................... 12 5.3. Power Spectral Density Measurement ................................................................................ 13 5.4. 6 dB Spectrum Bandwidth and Occupied Channel Bandwidth Measurement ............... 14 5.5. Radiated Emissions Measurement ...................................................................................... 15 5.6. Conducted Spurious Emissions and Band Edges Test .................................................... 24 5.7. Power Line Conducted Emissions ...................................................................................... 25 5.8. Band-Edge Measurements for Radiated Emissions .......................................................... 28 5.9. Antenna Requirements ......................................................................................................... 33 6. L I S T O F M E A S U R I N G E Q U I P M E N T ......................................... 34 7. T E S T S E T U P P H O T O G R A P H S O F E U T ..................................... 35 8. E X T E R I O R P H O T O G R A P H S O F T H E E U T ................................. 35 9. I N T E R I O R P H O T O G R A P H S O F T H E E U T .................................. 35 Report No.:TZ0035260450FRF03 Page 4 of 35 1. G E N E R A L I N F O R M A T I…

Text truncated - open the document above for the full version.

Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 1 of 44 Appendix Test Data for WLAN(2. 4G) (Conducted Measurement) Product Name: Rechargeable Video Walkie Talkie Trade Mark: / Test Model: TWV10 FCC ID: UU8-TWV10 Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: DTS Bandwidth Test Result Test Mode Antenna Frequency [MHz] DTS BW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 11B Ant1 2412 12.080 2406.040 2418.120 0.5 PASS 11B Ant1 2437 12.040 2431.040 2443.080 0.5 PASS 11B Ant1 2462 12.120 2456.040 2468.160 0.5 PASS 11G Ant1 2412 16.400 2403.880 2420.280 0.5 PASS 11G Ant1 2437 16.440 2428.840 2445.280 0.5 PASS 11G Ant1 2462 16.440 2453.880 2470.320 0.5 PASS 11N20SISO Ant1 2412 17.640 2403.240 2420.880 0.5 PASS 11N20SISO Ant1 2437 17.640 2428.240 2445.880 0.5 PASS 11N20SISO Ant1 2462 17.640 2453.240 2470.880 0.5 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 2 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 3 of 44 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 4 of 44 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 5 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 6 of 44 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 7 of 44 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Channel Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 11B Ant1 2412 15.915 2404.1374 2420.0524 --- --- 11B Ant1 2437 15.747 2429.1612 2444.9082 --- --- 11B Ant1 2462 15.914 2454.1903 2470.1043 --- --- 11G Ant1 2412 17.250 2403.4619 2420.7119 --- --- 11G Ant1 2437 17.089 2428.5275 2445.6165 --- --- 11G Ant1 2462 17.246 2453.5281 2470.7741 --- --- 11N20SISO Ant1 2412 18.170 2403.0335 2421.2035 --- --- 11N20SISO Ant1 2437 18.005 2428.0674 2446.0724 --- --- 11N20SISO Ant1 2462 18.136 2453.0841 2471.2201 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 8 of 44 Test Graphs 11B-Ant1-2412 11B-Ant1-2437 Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 9 of 44 11B-Ant1-2462 11G-Ant1-2412 Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 10 of 44 11G-Ant1-2437 11G-Ant1-2462 Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 11 of 44 11N20SISO-Ant1-2412 11N20SISO-Ant1-2437 Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 12 of 44 11N20SISO-Ant1-2462 Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 13 of 44 Appendix C: Maximum Average conducted output power Test Result Test Mode Antenna Frequency [MHz] Conducted Power [dBm] Conducted Limit [dBm] Verdict 11B Ant1 2412 15.31 ≤30.00 PASS 11B Ant1 2437 15.77 ≤30.00 PASS 11B Ant1 2462 14.81 ≤30.00 PASS 11G Ant1 2412 9.97 ≤30.00 PASS 11G Ant1 2437 11.14 ≤30.00 PASS 11G Ant1 2462 10.11 ≤30.00 PASS 11N20SISO Ant1 2412 11.00 ≤30.00 PASS 11N20SISO Ant1 2437 10.08 ≤30.00 PASS 11N20SISO Ant1 2462 10.18 ≤30.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) + Duty Cycle Factor(dB) Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 14 of 44 Appendix D: Maximum Average power spectral density Test Result Test Mode Antenna Frequency [MHz] Raw. Data [dBm/3kHz] Dc. Factor Result [dBm/3kHz] Limit [dBm/3kHz] Verdict 11B Ant1 2412 -16.13 0.67 -15.46 ≤8.00 PASS 11B Ant1 2437 -14.01 0.67 -13.34 ≤8.00 PASS 11B Ant1 2462 -18.29 0.67 -17.62 ≤8.00 PASS 11G Ant1 2412 -26.33 3.01 -23.32 ≤8.00 PASS 11G Ant1 2437 -27.50 3.01 -24.49 ≤8.00 PASS 11G Ant1 2462 -25.87 3.01 -22.86 ≤8.00 PASS 11N20SISO Ant1 2412 -26.65 3.17 -23.48 ≤8.00 PASS 11N20SISO Ant1 2437 -26.23 3.17 -23.06 ≤8.00 PASS 11N20SISO Ant1 2462 -27.00 3.17 -23.83 ≤8.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) + Duty Cycle Factor(dB) Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 15 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 16 of 44 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 17 of 44 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 18 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 19 of 44 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 20 of 44 Appendix E: Band edge measurements Test Result Test Mode Antenna Ch. Name Frequency.[M Hz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 Low 2412 5.50 -37.95 ≤-24.5 PASS 11B Ant1 High 2462 5.42 -31.73 ≤-24.58 PASS 11G Ant1 Low 2412 -1.40 -37.05 ≤-31.4 PASS 11G Ant1 High 2462 -1.72 -37.89 ≤-31.72 PASS 11N20SIS O Ant1 Low 2412 -3.27 -37.7 ≤-33.27 PASS 11N20SIS O Ant1 High 2462 -1.22 -46.66 ≤-31.22 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 21 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 22 of 44 11G-Ant1-2412-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 23 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0035260450FRF03 Page 24 of 44 Appendix F: Conducted Spurious Emission Test Result Test Mode Antenna Frequency [MHz] Freq. Range [Mhz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 0~Reference 4.99 4.99 --- PASS 11B Ant1 2412 30~1000 4.99 -61.65 ≤-25.01 PASS 11B Ant1 2412 1000~26500 4.99 -37.3 ≤-25.01 PASS 11B Ant1 2437 0~Reference 4.53 4.53 --- PASS 11B Ant1 2437 30~1…

Text truncated - open the document above for the full version.

FCCID:UU8-TWV10ReportNumber:BTF260626R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 3 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixDSARTestSetupPhotos BodySAR-Front(dist.0mm) BodySAR-Back(dist.0mm) FCCID:UU8-TWV10ReportNumber:BTF260626R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 3 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 BodySAR-Left(dist.0mm) BodySAR-Right(dist.0mm) FCCID:UU8-TWV10ReportNumber:BTF260626R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 3 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 BodySAR-Top(dist.0mm) BodySAR-Bottom(dist.0mm) Note:ThelinesdrawnfromtheEUTareusedtotransmitfixed-frequencysignalsandwillnotaffectthetest results. --ENDOFREPORT--

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 33 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China SARTestReport For ApplicantName:LexibookAmerica Address: C/OPramexInternational,1251AvenueoftheAmericas,3rdFl., NewYork,UnitedStates EUTName:RechargeableVideoWalkieTalkie ModelNumber:TWV10 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: Plant101,201and301,Building1,Block2,TantouIndustrial Park,TantouCommunity,SonggangStreet,Bao'anDistrict, Shenzhen,Guangdong,China ReportNumber:BTF260626R00301 TestStandards:47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 FCCID:UU8-TWV10 TestConclusion:Pass TestDate:2026-07-06 DateofIssue:2026-07-09 TestedBy: EllaKu/Tester Date:2026-07-09 PreparedBy: AmendaZhong/ProjectEngineer Date:2026-07-09 ApprovedBy: Ryan.CJ/EMCManager Date:2026-07-09 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. Draft TestReportNumber:BTF260626R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 33 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China RevisionHistory VersionIssueDateRevisionsContent R_V02026-07-09Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. Draft TestReportNumber:BTF260626R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 33 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5EquipmentunderTestAncillaryEquipment.........................................................…

Text truncated - open the document above for the full version.