UXX-CTR35Cellular Travel Router

Z-Fold Format / Double Sided FRONT BACK CTR35-xxx WINDOWS 7 1) Click the NETWORK CONNECTION icon in the lower right hand corner taskbar.You’ll see a list of available wireless networks2) Click CTR35-xxx3) Enter Default Password4) Click CONNECT CTR35 Wireless N Travel Router QUICK START GUIDE 1 ) What’s In The Box SETTING UP THE ROUTER CONNECTING YOUR COMPUTER WINDOWS XP WINDOWS VISTA MAC OSX 1) Click START2) Hover over CONNECT TO3) Click WIRELESS NETWORK CONNECTIONYou’ll see a list of available wireless networks4) Click CTR35-xxx5) Enter Default Password6) Click CONNECT1) Click START2) Hover over CONNECT TO3) Click WIRELESS NETWORK CONNECTIONYou’ll see a list of available wireless networks4) Click CTR35-xxx5) Enter Default Password6) Click CONNECT 1) Open your wireless connection list by clicking the AIRPORT wireless icon on your menu barYou’ll see a list of available wireless networks2) Click on the CTR35-xxx3) Enter Default Password 12v Power Supply Quick Start Guide Plug the power supply into an electrical outlet.Connect the power supply to the CTR35 and turn on “ ”.Connect a modem: USB Wireless Broadband Data Modem with Active Subscription, a supported Smart Phone with Active Data + Tethering Plan, or a Cable, DSL, Satellite, T1, T3, Ethernet Modem . POWER CABLE/DSL MODEM (WAN) COMPUTERS or LOCAL DEVICES ( LAN ) 2 ) 3 ) FINDING YOUR PASSWORD The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The CTR35 comes with a unique password creating built-in WiFi Security, which prevents unauthorized users from connecting to your WiFi network. 1) Open a browser window and type “ 192.168.0.1 ” in the address bar. Press enter/return. 2) When prompted for your password, type the eight character Default Password found on product label. 3) When you log-in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD . 5) STEP 1/3: If you choose, you can change the router’s DEFAULT ADMINISTRATOR PASSWORD . Then, select your TIME ZONE . Click NEXT . 7) STEP 2/3: CradlePoint recommends you customize your WiFi Network Name. Type in your personalized Network name here. You can also enable the Guest Network feature (see description on page 7). Choose the WIFI SECURITY LEVEL that best fits your needs: POOR for WEP, BETTER for WPA or WPA2 and BEST for WPA2 Only . ( Make sure your PC or other devices support the mode you choose ). Click NEXT . 8) Choose a personalized WIRELESS SECURITY PASSWORD . This password will be used to reconnect your devices to the router once the security settings have been saved. Click NEXT . 9) STEP 3/3: Review the details and record your wireless network name, administrative and wireless WPA password. Click APPLY to save the settings and update them to your router. If you are currently using the CTR35 WiFi network, reconnect your devices to the network using the new wireless network name and security password. WiFi as WAN ETHERNET CONNECTION SPECIAL FEATURES of the CTR35 6 7 8 5 2 3 4 to receive support, you must register your product: www.cradlepoint.com/portal CTR35-xxx www.cradlepoint.com/CTR35 For additional information, visit: © 2010 CradlePoint, Inc. All rights reserved. CradlePoint is not responsible for omissions or errors in typography or photogra phy. CradlePoint, WiPipe™, and the WiPipe logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are property of their r espective owners. NOTE: If you are asked for an “8-digit PIN”, see note on page 3. After you connect your modem to the router, you’re now ready to connect to the CradlePoint CTR35 WiFi.802.11n antennas provide up to 350 feet of range from the CradlePoint router to your connected computers or WiFi-enabled devices.Find your operating system and follow the connection steps.Find your default password on the bottom of your router.NOTE: If you are asked for an “ 8-digit PIN ”, click CONNECT USING A SECURITY KEY and enter your eight character default password found on the bottom of your router. ON/OFF Your unique default password is shown on the product label on the bottom of your router. It is the last eight charactersof your MAC Address.You will be asked for this password when you connect a new device to the WiFi network or log into the administration pages.The default password provides WiFi security out-of-the-box. 3G/4G MODEM SLOT (USB) Your router can make two WiFi networks: one private and one public . Guests on the public network have full, secure access to the internet - but are restricted from accessing the administration or any connected devices on your private network. Enable the Guest Network in Step 2 of the First Time Setup Wizard. It will appear as “Guest” in your available networks list. find this label on the bottom of your router | FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and ca n radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, t here is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receptio n, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:s2EORIENTORRELOCATETHERECEIVINGANTENNAs)NCREASETHESEPARATIONBETWEENTHEEQUIPMENTANDRECEIVERs#ONNECTTHEEQUIPMENTINTOANOUTLETONACIRCUITDIFFERENTF ROMTHATTOWHICHTHERECEIVERISCONNECTED s#ONSULTTHEDEALERORANEXPERIENCEDRADIO46TECHNICIANF…

Text truncated - open the document above for the full version.

805 W. Franklin Street
Boise, ID
83703 FCC Declaration letter FCC ID: UXX-CTR35 Date: 10.21.2010 To whom it may concern: We, the undersigned, declare that the CTR35 doesn’t have“Ad Hoc on non-US frequencies” and/or “on DFS frequencies” Sincerely, __________________________________ Steven T. Wood / Vice President of R&D CradlePoint, Inc. TEL(208) 424-5054 Facsimile(208) 429-6852 Email: [email protected]

8 05 W. Franklin Street
Boise, ID
83703 FCC ID: UXX-C TR35 Date: 10.21.2010 F E D E R A L C O M M U N I C A T I O N S C O M M I S S I O N Authorization and Evaluation Division C o n f i d e n t i a l i t y R e q u e s t Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Steven T. Wood / Vice President of R&D CradlePoint, Inc. TEL(208) 424-5054 Facsimile(208) 429-6852 Email: [email protected]

80 5 W. Franklin Street
Boise, ID
83703 A G E N C Y A U T H O R I Z A T I O N L E T T E R FCC ID: UXX-C TR35 Date: 10.21.2010 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, Steven T. Wood / Vice President of R&D CradlePoint, Inc. TEL(208) 424-5054 Facsimile(208) 429-6852 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Adapter Model: MU18-D120150-A1 Page 2 Page 3 Adapter Model: MU18-2120150-A1 Page 4 Page 5

Model: CTR35 Part No.: CTR35 H/W ver.: V 1.0 www.cradlepoint.com CRADLEPOINT CTR35 PRODUCT LABEL SSID: CTR35-5e5 MFG DATE: September 2010 Made in Taiwan 12V 1.5A Serial #: MM090169301008 MAC Address : 00304406b5e5 with some n features RoHS FCC ID: UXX-CTR35 IC: 6921A-CTR35

Label Location

Page 6 Page 7 Page 8 Page 9

FCC ID: UXX-CTR35 Report No.: RF991013C15 OPERATIONAL DESCRIPTION This device is a Cellular Travel Router, which operates in the 2.4GHz frequency spectrum with throughput of up to 130Mbps which OFDM technique will be applied. If the signal to noise ratio is too poor which could not support 130Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by AC adapter. The antenna is printed antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA991013C15 Report Format Version 3.0.1 1 RF EXPOSURE REPORT REPORT NO.: SA991013C15 MODEL NO.: CTR35 FCC ID: UXX-CTR35 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Cradlepoint, Inc. ADDRESS: 1199 Shoreline Lane, Suite 301 Boise, ID 83702 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. Report No.: SA991013C15 Report Format Version 3.0.1 2 1. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 3. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA991013C15 Report Format Version 3.0.1 3 4. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For FCC ID: UXX-CTR35 FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 20.300 1 20 0.027 1.000 For FCC ID: XCNPXU1900 (4G dongle) FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2496~2690 23.340 3 20 0.086 1.000 For FCC ID: N7N-MC5725U (3G dongle) FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 824~849 24.850 2.4 20 0.106 0.549 1850~1910 24.940 1.8 20 0.094 1.000 CONCULSION: The product can connect external USB dongle to support 3G/4G function. WLAN and 3G/4G function can work simultaneously. The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN+3G = 0.027 / 1 + 0.106 / 0.549 = 0.219 2. WLAN+4G = 0.027 / 1 + 0.086 / 1 = 0.113 Therefore, the maximum calculation of this situation is 0.219, which is less than the “1” limit.

Report No.: RF991013C15 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO.: RF991013C15 MODEL NO.: CTR35 FCC ID: UXX-CTR35 RECEIVED: Oct. 13, 2010 TESTED: Oct. 21 ~ Nov. 05, 2010 ISSUED: Nov. 08, 2010 APPLICANT: Cradlepoint, Inc. ADDRESS: 1199 Shoreline Lane, Suite 301 Boise, ID 83702 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 71 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF991013C15 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION...................................................................................................... 4 2. SUMMARY OF TEST RESULTS ............................................................................. 5 2.1 MEASUREMENT UNCERTAINTY........................................................................... 5 3. GENERAL INFORMATION ...................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 6 3.2 DESCRIPTION OF TEST MODES .......................................................................... 8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ..................................................... 8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 11 4. TEST TYPES AND RESULTS ............................................................................... 12 4.1 RADIATED EMISSION MEASUREMENT ............................................................. 12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT........................................... 12 4.1.2 TEST INSTRUMENTS........................................................................................... 13 4.1.3 TEST PROCEDURES ........................................................................................... 14 4.1.4 DEVIATION FROM TEST STANDARD.................................................................. 14 4.1.5 TEST SETUP......................................................................................................... 15 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 15 4.1.7 TEST RESULTS .................................................................................................... 16 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...................................... 30 4.2.2 TEST INSTRUMENTS........................................................................................... 30 4.2.3 TEST PROCEDURES ........................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD.................................................................. 31 4.2.5 TEST SETUP......................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 32 4.2.7 TEST RESULTS .................................................................................................... 33 4.3 6dB BANDWIDTH MEASUREMENT..................................................................... 37 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 37 4.3.2 TEST INSTRUMENTS........................................................................................... 37 4.3.3 TEST PROCEDURE.............................................................................................. 37 4.3.4 DEVIATION FROM TEST STANDARD.................................................................. 37 4.3.5 TEST SETUP......................................................................................................... 38 4.3.6 EUT OPERATING CONDITIONS .......................................................................... 38 4.3.7 TEST RESULTS .................................................................................................... 39 4.4 MAXIMUM OUTPUT POWER ............................................................................... 43 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT................................ 43 4.4.2 INSTRUMENTS ..................................................................................................... 43 4.4.3 TEST PROCEDURE.............................................................................................. 43 Report No.: RF991013C15 3 Report Format Version 3.0.1 4.4.4 DEVIATION FROM TEST STANDARD.................................................................. 44 4.4.5 TEST SETUP......................................................................................................... 44 4.4.6 EUT OPERATING CONDITIONS .......................................................................... 44 4.4.7 TEST RESULTS .................................................................................................... 45 4.5 POWER SPECTRAL DENSITY MEASUREMENT ................................................ 46 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ............................. 46 4.5.2 TEST INSTRUMENTS......…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Test Mode A) 2 CONDUCTED EMISSION TEST (Test Mode B) 3 RADIATED EMISSION TEST (Test Mode A) 4 RADIATED EMISSION TEST (Test Mode B)