UZI-C330HSPA+ USB MODEM

The BandLuxe C33X Series User Manual PN: 65005400011 (Rev.C) Contents Chapter 1 Getting Started 3 Chapter 2 Connecting 9 Chapter 3 SMS 12 Chapter 4 Setting 14 Chapter 5 Statistics & Information 17 Chapter 6 Q&A 19 Chapter 7 Important Safety Information and Glossary 21 The BandLuxe C33X Series Chapter 1 Getting Started 4 Chapter 1 Getting Started What’s content BandLuxe C33X USB dongle modem Features ● Support 2G, 3G, 3.5G and HSPA+ standard ( HSDPA / WCDMA / EDGE / GPRS ) ● Support SMS Message ● USB Interface ● Support microSD/microSDHC storage ● Support systems: Windows 7, Vista, XP ● Does not interfere with other USB peripherals ● Multi language interface (English, French, German, Italian, Spanish, Traditional Chinese, Russian, Portuguese and Finnish) ● Plug & Play Before You Install Information Before installing the C33X, we recommend obtaining the following information from the SIM Card Mobile network operator: Access Point Name (APN) - For many carriers, the APN may simply be Internet. Phone Number - The Phone Number to dial to establish a network connection. BandLuxe software helps input this number correctly. Password (Optional) - Some (but not many) carriers require a password. Notice: BandLuxe C33X is a radio device. Please be aware to keep metal materials away from the device. Insert the SIM Card & microSD Memory Card 1. USB connector can be extended by clicking the USB modem (fig. 1) 2. Remove the back cover to insert the SIM card. (fig. 2) 3. microSD card reader is equipped. Follow the arrow direction to insert the microSD card. (fig. 3) *micro SD card is an optional purchased accessory. Hardware Installation With the SIM card properly inserted, the C33X may now be installed into the computer via USB port. 1. Insert the C33X into the computer. 2. The LED should light up when connection is established, though it may be obscured. 5 Chapter 1 Getting Started Software Installation The process and appearance of certain software elements in Windows Vista will be somewhat different than in XP. These differences are minor and should not limit the functionality of the C33X in any way. New Hardware Detection Windows XP Once the C33X is connected, a dialog box should pop up from the Toolbar Hardware Connection Icon. The device will be identified as the BandLuxe 3.5G HSPA Adapter. Windows Vista / Win 7 In Vista / Win 7, a pop-up window may appear. Click Allow to proceed. After the first pop-up, all other aspects for software installation will be identical in all compatible versions of Windows. Software installation should proceed automatically. If it does not, it may be initiated from My Computer, where the C33X will be identified as a CD-ROM device. Sometimes a restart will occur during installation. If it does, reinitiate installation from My Computer. Install Shield Wizard Setup Language Preparation The C33X will automatically use the appropriate language for your OS, if available. Welcome The Setup Wizard window opens automatically. The first page contains OS compatibility and legal disclaimers. Click Next to continue. 6 Chapter 1 Getting Started License Agreement Click I accept the terms in the license agreement > Next to continue. Select Installation Folder Click Change to manually select a folder. Change Current Destination Folder Highlight the folder and click OK to select it. Click Cancel to close the Browse window. Confirm Installation Click Back to change any preceding information or settings. Click Install to begin installation. Installation Installation time will depend on variable computer. Installation Complete When installation is completed, click Finish to exit. The Connection Manager will open automatically. 7 Chapter 1 Getting Started 8 Chapter 1 Getting Started Home Screen 1. Signal Strength 2. Minimize 3. Radio Technology 4. Mobile Network Operator 5. Connection Status 6. Connection Time Elapse 7. Total Data Uploaded 8. Total Data Downloaded 9. Menu 10. Home Screen 11. Connect/Disconnect 12. Close Note: The Home screen only indicates 3G (internet) connection status. After installation, the C33X automatically initiates 2G (SMS) functions upon successful connection to the computer. Text messages can be sent or received, even if the Home screen indicates no connection. Menu Screen SMS: Text message folders such as Inbox, Draft, etc. Setting: General, SMS, SIM, Radio and Network preferences. Statistics: Upload/Download graphs, totals and connection log. Contacts: C33X SIM Card and Outlook Contact lists. Profile: Connection profile setup/options. Information: Device, Version. 1 212 3 4 5 6 7 11 10 8 9 The BandLuxe C33X Series Chapter 2 Connecting 10 Chapter 2 Connecting Establishing a Connection With the C33X installed, an online connection can be ready to use. The C33X will automatically scan your system and create a default profile, which should work in the vast majority of cases. To test it, simply click the Connect button. Connection should take about 5 seconds. When established, the Home screen should show Connected, with the onscreen clock running and the Download/Upload tallies running. The toolbar icon will also change color to indicate the connection protocol (same as LED indicator). See Specifications for details. If connection is unsuccessful, check if the device and SIM card are properly connected and inserted. If they are, a new internet profile may need to be created. Create a Profile 1. Click Menu > Profile. The profile menu will contain the default profile, showing the operator's name of the SIM card. 2. Click New to create a new profile. Depending on the carrier, all 5 spaces may not need to be filled to proceed. 3. Choose a Profile Name. The name is arbitrary and is helpful when different connection methods are available. 4. Inquire with the Mobile network operator (SIM carrier) as to whether the User Name and Password are required. 5. The Password can be any combination of letters, numbers or symbols and is case sensitive. 6. Enter the Access Point Name…

Text truncated - open the document above for the full version.

FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group APPENDIX 2 PHOTOGRAPHS OF EUT FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group All of EUT Front View of EUT FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT-1 FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Side View of EUT-2 Side View of EUT-3 FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued…

Text truncated - open the document above for the full version.

16.50mm 10.50mm Center line 13.30mm Center line 6.40mm 21.5 mm

16.50mm 10.50mm Center line 13.30mm Center line 6.40mm 21.5 mm

FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Open View of EUT – 1 Open View of EUT – 2 FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Internal View of EUT – 1 Internal View of EUT – 2 WWAN Antenna FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Internal View of EUT – 3 Internal View of EUT – 4 FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Internal View of EUT – 5 Internal View of EUT – 6 FCC ID: UZI-C330 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and s…

Text truncated - open the document above for the full version.

Report File No. : F690501/RF-SAR001927 Date of Issue : 2011-04-06 Page : 2 / 98 Contents 1. General Information 1.1 Testing Laboratory........................................................................................... 3 1.2 Details of Applicant.......................................................................................... 3 1.3 Version of Report............................................................................................. 3 1.4 Description of EUT(s)....................................................................................... 3 1.5 Test Environment............................................................................................. 4 1.6 Operation Configuration.................................................................................... 4 1.7 Evaluation procedures....................................................................................... 5 1.8 The SAR Measurement System............................................................................ 6 1.9 System Components.......................................................................................... 8 1.10 SAR System Verification.................................................................................... 9 1.11 Tissue Simulant Fluid for the Frequency Band.......................................................... 11 1.12 Test Standards and Limits.................................................................................. 12 2. Instruments List.................................................................................... 14 3. Summary of Results................................................................................ 15 APPENDIX A. DASY4 SAR Report B. Uncertainty Analysis C. Calibration certificate Report File No. : F690501/RF-SAR001927 Date of Issue : 2011-04-06 Page : 3 / 98 1. General Information 1.1 Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, 435-040, Korea Telephone : +82 +31 428 5700 FAX : +82 +31 427 2371 Homepage : www.kr.sgs.com/ee 1.2 Details of Manufacturer Manufacturer : FAIR GOAL ELECTRONIC CO. Address : 1F, No. 97-1, Haihu, Luzhu Township, Taoyuan Country 338, Taiwan (R.O.C.) Contact Person : Jonas Chuang Phone No. : 886-3-354-1237 1.3 Version of Report Version Number Date Revision 00 2011-04-06 Initial issue 1.4 Description of EUT(s) EUT Type : HSPA+ USB Modem Model : C330 Serial Number : N/A Mode of Operation : GSM850, PCS1900, WCDMA V, WCDMA II Duty Cycle : 8(GPRS 1Tx Slot), 4(GPRS 2Tx Slot), 2.67(GPRS 3Tx Slot), 2(GPRS 4Tx Slot), 1(WCDMA) Tx Frequency Range : 824.2 MHz ~ 848.8 MHz (GSM850) 1850.2 MHz ~ 1909.8 MHz (PCS1900) 826.4 MHz ~ 846.6 MHz (WCDMA V) 1852.4 MHz ~ 1907.6 MHz (WCDMA II) Conducted Max Power : 31.60 dBm(GPRS850), 28.30 dBm(GPRS1900), 22.20 dBm(WCDMA V), 21.46 dBm(WCDMA II) Battery Type : USB Power Supply from Laptop Computer Report File No. : F690501/RF-SAR001927 Date of Issue : 2011-04-06 Page : 4 / 98 1.5 Test Environment Ambient temperature : (22 2) ° C Tissue Simulating Liquid : (22 2) ° C Relative Humidity : (55 % R.H. 1.6 Operation Configuration The device in GSM and WCDMA mode was controlled by using a Communication tester (CMU 200). Communication between the device and the tester was established by air link. Measurements were performed at the lowest, middle and highest channels of the operating band. The power of EUT was supplied by USB port of Host PC and it was tested with the extender cable that was given by manufacturer as the accessory. Please refer to the below information of Host PC and find the setup photo file. The DASY4 system measures power drift during SAR testing by comparing e-field in the same location at the beginning and at the end of measurement. Host PC Information Position Manufacturer Model Name Horizontal Up Sony Corporation PCG-1P6P Vertical Front Lenovo T60 Report File No. : F690501/RF-SAR001927 Date of Issue : 2011-04-06 Page : 5 / 98 1.7 EVALUATION PROCEDURES - Power Reference Measurement Procedures The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The Minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. The minimum distance of probe sensors to surface is 4 mm. This distance cannot be smaller than the Distance of sensor calibration points to probe tip as defined in the probe properties (for example, 2.7 mm for an ET3DV6 probe type). - The entire evaluation of the spatial peak values is performed within the Post-processing engine (SEMCAD). The system always gives the maximum values for the 1 g and 10 g cubes. The algorithm to find the cube with highest averaged SAR is divided into the following stages: 1. The extraction of the measured data (grid and values) from the Zoom Scan. 2. The calculation of the SAR value at every measurement point based on all stored data (A/D values and measurement parameters) 3. The generation of a high-resolution mesh within the measured volume 4. The interpolation of all measured values from the measurement grid to the high-resolution grid 5. The extrapolation of the entire 3-D field distribution to the phantom surface over the distance from sensor to surface 6. The calculation of the averaged SAR within masses of 1 g and 10 g. The probe is calibrated at the center of the dipole sensors that is located 1 mm to 2.7 mm away from the probe tip. During measurements, the probe stops shortly above the phantom surface, depending on the probe and the surface detecting system. Both distances are included as parameters in the probe configuration file. The software always knows exactly how far away the measured point is from the surface. As the probe cannot directly measure at the surface, the values between the deepest measured point and the surface must be extrapolated. The angle between the probe axis and the surface normal line is less than 30 degre…

Text truncated - open the document above for the full version.

Report No.: EH/2011/30045 FCC ID: UZI-C330 Issue Date: Apr. 08, 2011 Page: 1 of 95 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 22 SUBPART H, PART 24 SUBPART E OF Product Name: HSPA+ USB Modem Brand Name: BandLuxe Model Name: C330 Model Difference: N/A FCC ID: UZI-C330 Report No.: EH/2011/30045 Issue Date: Apr. 08, 2011 FCC Rule Part: 2 , 22H & 24E Prepared for: BandRich Inc. 7F., No. 188, Baociao Rd., Sin-Dian City, Taipei County 23146, Taiwan (R.O.C.) Prepared by SGS Taiwan Ltd. Electronics & Communication Laboratory No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No.: EH/2011/30045 FCC ID: UZI-C330 Issue Date: Apr. 08, 2011 Page: 2 of 95 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unau- thorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE Applicant: BandRich Inc. 7F., No. 188, Baociao Rd., Sin-Dian City, Taipei County 23146, Taiwan (R.O.C.) Product Name: HSPA+ USB Modem Brand Name: BandLuxe Model No.: C330 Model Difference: N/A FCC ID: UZI-C330 File Number: EH/2011/30045 Date of test: Mar. 17, 2011 ~ Apr. 08, 2011 Date of EUT Received: Mar. 17, 2011 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA-603-C-2004 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rule FCC PART 22 subpart H, PART 24 subpart E. The test results of this report relate only to the tested sample identified in this report. Test By: Date: Apr. 08, 2011 Sky Wang / Asst. Supervisor Prepared By: Date: Apr. 08, 2011 Alex Hsieh / Sr. Engineer Approved By: Date: Apr. 08, 2011 Jim Chang / Supervisor Report No.: EH/2011/30045 FCC ID: UZI-C330 Issue Date: Apr. 08, 2011 Page: 3 of 95 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its inter- vention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the tra…

Text truncated - open the document above for the full version.