UZI-P530ALTE/HSPA + Mobile Router

User Manual BandLuxe P530 Series LTE/HSPA+/GPRS WLAN Mobile Router 1 Introduction Thank you for your purchase of the P530 Series LTE/HSPA+/GPRS WiFi Mobile Router. This device is designed to access the Internet via 4G technology and share the Internet through a WLAN network. You can also share files with your friends with an optional microSD card. P530 is portable and easy to use. Reading the user manual will help you make the most use of your product. Features  LTE/HSPA+/GPRS WLAN Mobile Router  WPS Support  Supports up to 10 simultaneous wireless users  Supports optional microSD card (up to 32 GB)  Uplink speeds up to 50 Mbps  Downlink speeds up to 100 Mbps  Supports WLAN 802.11 b/g/n  Operating Frequency Bands o LTE: 700/AWS/1900 o UMTS/HSPA+: 900/2100 MHz o GSM: 850/900/1800/1900 MHz  External 4G Antenna Port Ready Getting Started 2 Getting Started This chapter will provide a hardware overview of the P530 Series LTE/HSPA+/GPRS WLAN Pocket Router step by step instructions on installing the device. Package Contents 1. 1. 1. P530 series LTE/HSPA+/GPRS WLAN Pocket Router 2. Power Adapter 3. Battery 4. USB cable Installation 1. Remove the back cover of the device. 2. Insert the SIM card into the slot. Ensure the SIM card orientation matches the SIM card slot. 3. Insert the microSD card (optional) into the slot with the metal contacts facing down and towards the slot. NOTE: The optional microSD card allows for file sharing between PCs on the same network when the P530 is connected via the USB cable/WLAN to the client . 4. Insert the battery. Ensure the battery contacts are properly oriented. 5. Replace the back cover of the device. 6. Connect the power adapter to the router. Plug the power adapter into a wall outlet to charge the battery.  Warning: To prevent the battery from overheating, do not charge the device for long periods of time while using. NOTE: When the USB cable is connected to a PC, the cable provides Getting Started 3 4G connectivity. The USB port may not provide sufficient charge to replenish battery power. To charge the battery, use the power adapter to connect the device to a wall outlet. 7. Link the router to your PC.  To link the router to your PC via a wireless connection, in Microsoft Windows, go to Control Panel > Network Connections. Right click on the Wireless Network Connection and choose View Available Wireless Networks. Select the SSID and enter the password (see the network information card in the box) and click Connect.  To link the router to your PC via a USB connection, connect the USB cable to the device and PC. Microsoft Windows automatically installs RNDIS drivers and establishes a local area connection, as indicated by the Local Area Connection icon on your PC. USB Connectivity If the USB cable is connected between the device and a PC, the device establishes a local area connection, indicated by the Local Area Connection icon on the client PC, and a connection to the Internet via the user's mobile network connection, such as HSPA. If the USB cable is not used, the device may function as a wireless router and/or an Internet access point. As a wireless router, the PR-30 is capable of supporting up to 10 simultaneous wireless connections. In addition, the device allows users to share a single Internet connection. If a microSD card is installed, the card may be used as a common storage space among the connected PCs. P530 series support microSD cards up to 32GB. USB No USB Internet Access Ye s Ye s Wireless connectionsNo 10 simultaneous File sharing Ye s Ye s Getting Started 4 Basic Functions Powering On and Off To power the P530 on, slide the device up to the ON position. When the P530 is powered on, the LEDs start blinking (approximately 16 secs). Enabling WPS WPS is a standard designed to easily setup and automatically configure secure WLAN networks between two WPS supported devices. If the client PC supports WPS, the WPS feature can be a user-friendly and simple process to get your WLAN network up and running. 1. Enable WLAN. 2. Press and hold the WPS button for at least 5 seconds. 3. Confirm the WPS option on the client PC trying to connect to the P530. WPS connecting device followed by New device connected is displayed.  Note: The safe temperature range for discharging and charging the battery is as follows:  Charging temperature: 0~40 degrees Celsius, maximum 45 degrees Celsius; once temperature exceeds 45 degrees the device will stop charging.  Warning: When using in normal temperature environments, high battery power consumption may cause the battery temperature to exceed 45 degrees and thus stop charging if connected to a wall outlet. It is not recommended to charge and use the device at the same time. Discharging (operating) temperature: 20~60 degrees Celsius, maximum 75 degrees Celsius; once temperature exceeds 70 degrees the device will power off. P530 Series Management 5 P530 Series Management Accessing the Device P530 WLAN Router uses the web-based interface for managing and configuring wireless network settings. To access the interface, open a browser such as Internet Explorer and enter the router’s default IP in the browser’s address bar. Use the appropriate IP depending on the connection method. Connection method Default IP USB 192.168.21.1 WLAN 192.168.100.1 When the login window appears, enter the default username, root, and default password, 1234. P530 Series Management 6 Basic Setup SSID Network name of your WLAN network. It is case sensitive and can not exceed 14 characters. Default name is printed on the network information card. Encryption Type Method of encryption used when transferring data through the airwaves from the router to the client PC or vice versa. The PR-30 WLAN Router supports 3 encryption types - WEP, WPA, and WPA+WPA2. WPA is a WLAN standard that was designed to improve the security features of WEP. WPA2 is a more advanced, more secure version of WPA. Passphrase (WEP only) Sequence of words or text used …

Text truncated - open the document above for the full version.

Search|RSS|Updates|E-Filing|Initiatives|Consumers|Find People FCC Logo -Return to the FCC Home Page Office of Engineering and Technology FCC>FCC E-filing> Inquiry System Home Page> View Inquiry FCC Site Map OET Home Page Site Options Basic KDB Search Advanced KDB Search Submit an Inquiry Reply to an Inquiry Response Category List FAQ Search Major Guidance Publications Draft Laboratory Division Publications Draft Laboratory Division Publications (Expired) Draft Publication Moderation Policy Related Sites Equipment Authorization Presentations Equipment Authorization System (EAS) Telecommunications Certification Bodies (TCB) Reply to an OET Inquiry Response Currently Displaying Inquiry Tracking Number:442220 Contact Information: Customer First Name: Roy Customer Last Name: Wu Telephone Number: 886-3-3183232 Extension: 1640 E-mail Address: [email protected] Address: Line 1:N/A Line 2: P.O. Box: City:N/A State: Zip Code: Country: Inquiry Details on 09/24/2012: First category: Radio Frequency Exposure - MPE; SAR Second category: Specific Absorption Rate Third category: Non-handset SAR Subject:SAR Test Request for Mobile Router Inquiry:Dear FCC Officer, This device, P530 is a LTE/HSPA+/WLAN Mobile Router embedded a re-chargeable Li- ion battery. Attached please find the "Product Description", "User Manual", and "Declaration". Since this Mobile Router is designed using on the table, please kindly advise whether the SAR testing for this device is not required and the MPE evaluation is enough. Thanks a lot. B.R. Roy Wu / BVADT Taiwan FCC Response on 10/04/2012: This inquiry is a duplicate of KDB Inquiry 795978. As a result, this inquiry is being closed. ---Reply from Customer on 10/04/2012--- Dear FCC Officer, I'm sorry. I cannot find the result of KDB 795978 from FCC website. Is it a publication or inquired by other applicant? Please kindly copy the result of KDB 795978 for our reference or advise how to get the KDB. 頁 1/ 2OET Inquiry System Inquiry Tracking Number 442220 2012/12/12file:///C:/Users/Andrea/AppData/Local/Temp/notesEA312D/OET%20Inquiry%20Sys... Many thanks. B.R. Roy Wu / BVADT Taiwan FCC Response on 10/11/2012: Mark Chung at SGS Taiwan submitted an identical request. Please contact him for more information. ---Reply from Customer on 10/11/2012--- This Inquiry is being reopened by the FCC. In this particular case SAR testing is necessary. Please utilize the test guidance found in KDB Publication 941225 D06. If the sliding power switch can be fixed/locked in place, a test separation distance of 10 mm may be used. If not, use a test separation distance of 5 mm, as indicated in KDB Publication 941225 D06. FCC Response on 10/11/2012: In this particular case SAR testing is necessary. Please utilize the test guidance found in KDB Publication 941225 D06. If the sliding power switch can be fixed/locked in place, a test separation distance of 10 mm may be used. If not, use a test separation distance of 5 mm, as indicated in KDB Publication 941225 D06. Enter any additional comments below: ProceedClear Please send any comments or suggestions for this site to OET Systems Support Federal Communications Commission 445 12th Street, SW Washington, DC 20554 More FCC Contact Information... Phone: 888-CALL-FCC (225-5322) TTY: 888-TELL-FCC (835-5322) Fax: 202-418-0232 E-mail:[email protected] -Privacy Policy -Web Policies & Notices -Customer Service Standards -Freedom of Information Act 頁 2/ 2OET Inquiry System Inquiry Tracking Number 442220 2012/12/12file:///C:/Users/Andrea/AppData/Local/Temp/notesEA312D/OET%20Inquiry%20Sys...

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 51 Report No. : SA121023C07 Issued Date : Dec. 19, 2012 Revision : R01 FCC SAR Test Report Report No. : SA121023C07 Applicant : BandRich Inc. Address : 6F., NO. 71, ZHOUZI ST., NEIHU DIST., TAIPEI CITY 11493, TAIWAN (R.O.C.) Product : LTE/HSPA+ Mobile Router FCC ID : UZI-P530A Brand : BandLuxe Model No. : P530A Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v04 KDB 941225 D01 v02 / KDB 941225 D05 v02 / KDB 941225 D06 v01 Date of Testing : Nov. 07, 2012 ~ Nov. 14, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 51 Report No. : SA121023C07 Issued Date : Dec. 19, 2012 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 13 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Dec. 12, 2012 Report No. : SA121023C07 Revision : R01 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows.

Report No.: RF121023C07-3 1 of 47 Report Format Version 5.1.0 FCC TEST REPORT (15.247) REPORT NO.: RF121023C07-3 MODEL NO.: P530A FCC ID: UZI-P530A RECEIVED: Oct. 23, 2012 TESTED: Oct. 29 ~ Nov. 15, 2012 ISSUED: Nov. 26, 2012 APPLICANT: BandRich Inc. ADDRESS: 6F., No. 71, Zhouzi St., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121023C07-3 2 of 47 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 6 3. GENERAL INFORMATION ...................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES .......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 12 4. TEST TYPES AND RESULTS ............................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............. 13 4.1.2 TEST INSTRUMENTS ........................................................................................... 14 4.1.3 TEST PROCEDURES ........................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 15 4.1.5 TEST SETUP ......................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 16 4.1.7 TEST RESULTS .................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 28 4.2.2 TEST INSTRUMENTS ........................................................................................... 28 4.2.3 TEST PROCEDURES ........................................................................................... 29 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 29 4.2.5 TEST SETUP ......................................................................................................... 29 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 29 4.2.7 TEST RESULTS .................................................................................................... 30 4.3 6dB BANDWIDTH MEASUREMENT ..................................................................... 34 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 34 4.3.2 TEST SETUP ......................................................................................................... 34 4.3.3 TEST INSTRUMENTS ........................................................................................... 34 4.3.4 TEST PROCEDURE .............................................................................................. 34 4.3.5 DEVIATION FROM TEST STANDARD ................................................................. 34 4.3.6 EUT OPERATING CONDITIONS .......................................................................... 34 4.3.7 TEST RESULTS .................................................................................................... 35 4.4 CONDU…

Text truncated - open the document above for the full version.

Report No.: RF121023C07 1 of 28 Report Format Version 5.0.0 FCC TEST REPORT (PART 22) REPORT NO.: RF121023C07 MODEL NO.: P530A FCC ID: UZI-P530A RECEIVED: Oct. 23, 2012 TESTED: Nov. 07 ~ Nov. 08, 2012 ISSUED: Nov. 27, 2012 APPLICANT: BandRich Inc. ADDRESS: 6F., No. 71, Zhouzi St., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121023C07 2 of 28 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1 CERTIFICATION ........................................................................................................ 4 2 SUMMARY OF TEST RESULTS ................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY .............................................................................. 5 2.2 TEST SITE AND INSTRUMENTS ............................................................................... 6 3 GENERAL INFORMATION ......................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................... 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST ......................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................ 8 3.4 TEST ITEM AND TEST CONFIGURATION ................................................................ 9 3.5 EUT OPERATING CONDITIONS .............................................................................. 10 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 10 4 TEST TYPES AND RESULTS................................................................................... 11 4.1 OUTPUT POWER MEASUREMENT ........................................................................ 11 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ...................................................... 11 4.1.2 TEST PROCEDURES .............................................................................................. 11 4.1.3 TEST SETUP ........................................................................................................... 12 4.1.4 TEST RESULTS ....................................................................................................... 13 4.2 FREQUENCY STABILITY MEASUREMENT ............................................................ 14 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT ......................................... 14 4.2.2 TEST PROCEDURE ................................................................................................. 14 4.2.3 TEST SETUP ........................................................................................................... 14 4.2.4 TEST RESULTS ....................................................................................................... 15 4.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................ 16 4.3.1 TEST PROCEDURES .............................................................................................. 16 4.3.2 TEST SETUP ........................................................................................................... 16 4.3.3 TEST RESULTS ....................................................................................................... 17 4.4 BAND EDGE MEASUREMENT ................................................................................ 18 4.4.1 LIMITS OF BAND EDGE MEASUREMENT .............................................................. 18 4.4.2 TEST SETUP ........................................................................................................... 18 4.4.3 TEST PROCEDURES .............................................................................................. 18 4.4.4 TEST RESULTS ....................................................................................................... 19 4.5 CONDUCTED SPURIOUS EMISSIONS ................................................................... 20 4.5.1 LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT .................... 20 4.5.2 TEST PROCEDURE .....................................................................…

Text truncated - open the document above for the full version.

Report No.: RF121023C07-1 1 of 130 Report Format Version 5.0.0 FCC TEST REPORT (PART 24) REPORT NO.: RF121023C07-1 MODEL NO.: P530A FCC ID: UZI-P530A RECEIVED: Oct. 23, 2012 TESTED: Nov. 06 ~ Nov. 08, 2012 ISSUED: Nov. 27, 2012 APPLICANT: BandRich Inc. ADDRESS: 6F., No. 71, Zhouzi St., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121023C07-1 2 of 130 Report For…

Text truncated - open the document above for the full version.