V2X-PM95MOBILE COMPUTER

Document Number PM-FCC-PM95-02 Name and address of the Manufacturer POINT MOBILE CO., LTD B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul, Korea, 08512 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-11-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: V2X Applicant FRN: 0022602569 [POINT MOBILE CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, [POINT MOBILE AMERICAS LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [POINT MOBILE CO., LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. [POINT MOBILE AMERICAS LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code. Designated U.S. Agent Information: FRN: 0033667999 Name: POINT MOBILE AMERICAS LLC Address: 22722 29th Drive SE, Suite 100, Bothell, WA 98021 USA Contact Person: Jae W. Choi / Sr. Account Executive Tel.: +1.202.798.0786 Email: [email protected] Sincerely, POINT MOBILE CO., LTD POINT MOBILE AMERICAS LLC Wilson Park Jae W. Choi

Rev 1/26/2023 Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06‐03‐2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: V2X‐PM95 [Point Mobile Co., LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Wilson Park Rev 1/26/2023 Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06‐03‐2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: V2X‐PM95 [Point Mobile Co., LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment . Sincerely, Wilson Park

Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Date: 06/24/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Letter FCC ID: V2X-PM95 To whom it may concern; We declare that the following statements will be included in the package label according to KDB 255076 D01 and part 20.19(f). The device is hearing aid-compatible. Conversational gain with hearing aids: 8.60 dB Conversational gain without hearing aids: 15.59 dB Should you have any questions, please contact us. Sincerely, Contact Name: Wilson Park Title: Executive Managing Director

Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Date: 09/27/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Statements FCC ID: V2X-PM95 We, Point Mobile Co., LTD., attest the followings for our device.(Indoor Client 6XD) 1. The device will only associate and connect with a low-power indoor access point or subordinate device and never directly connect to other client devices. 2. This device will always initiate transmission under the control of a low-power indoor AP or subordinate except for brief transmissions before joining a network. These short messages will only occur if the client has detected an indoor AP or subordinate operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 3. Transmissions will be lower or equal to the power advertised by the indoor low-power access point or subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6XD. 4. Prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, Contact Name: Wilson Park Title: Executive Managing Director

Federal Communications CommissionDA 23-914 Before the Federal Communications Commission Washington, D.C. 20554 In the Matter of Amendment of the Commission’s Rules Governing Standards for Hearing Aid-Compatible Handsets ) ) ) ) WT Docket No. 20-3 ORDER Adopted: September 29, 2023Released: September 29, 2023 By the Chief, Wireless Telecommunications Bureau: I.INTRODUCTION 1.Today we grant a limited waiver of section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules with respect to the volume control technical standard that handset manufacturers use in part to certify handsets as hearing aid-compatible under the 2019 ANSI Standard. 1 Our action is prompted by a request filed by the Alliance for Telecommunications Industry Solutions (ATIS) seeking waiver of certain aspects of these rules. 2 Under the terms of the time-limited waiver we grant today, a handset may be certified as hearing aid-compatible under the 2019 ANSI Standard if it meets the volume control testing requirements described in this Order as well as all other aspects of the 2019 ANSI Standard. 2.Consistent with ATIS’s September 12, 2023, ex parte letter (ATIS Ex Parte Letter) and as a condition of this waiver, we require a handset to pass the conversational gain test at the 2 Newton (N) force level on all available narrowband and wideband codecs and air interface combinations. 3 With respect to the 8N force level test, we agree with the ATIS Ex Parte Letter that this test should be performed, and we waive the requirement that a handset achieve at least an 18 dB conversational gain. 4 This waiver is conditioned on manufacturers performing the 8N force level test using the same testing parameters that we are requiring for the 2N force level test and to place on the handset’s package label the resulting conversational gain (even if it is below 18 dB) in a manner consistent with our existing hearing aid compatibility labeling rules. 3.With respect to the related receive distortion and noise performance (distortion/noise) and receive acoustic frequency response performance (frequency response) tests, we agree with the ATIS Ex Parte Letter that handsets must pass testing using at least one narrowband and one wideband codec of the 1 The 2019 ANSI Standard refers to the technical document entitled Accredited Standards Committee C63®– Electromagnetic Compatibility, American National Standard Methods of Measurement of Compatibility Between Wireless Communications Devices and Hearing Aids, ANSI C63.19-2019 (approved Aug. 19, 2019) (2019 ANSI Standard). 2 Petition of ATIS on Behalf of the Covered Entities of the Hearing Aid Compatibility Task Force for Limited, Interim Waiver, WT Docket Nos. 15-285 and 20-3 (filed Dec. 16, 2022) (ATIS Waiver Petition). ATIS filed its waiver petition on behalf of all manufacturers and service providers subject to section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules. Id. at 1, 4. 3 Letter from Thomas Goode, General Counsel, ATIS, to Marlene H. Dortch, Secretary, FCC, WT Docket Nos. 15- 285 and 20-3, at 2 (filed Sept. 12, 2023) (ATIS Ex Parte Letter); see also ATIS Waiver Petition at 4, 12-13. Below we explain the conversational gain test. See infra para. 9. 4 ATIS Ex Parte Letter at 2. Originally, ATIS had proposed to waive the entire 8N force level test. ATIS Waiver Petition at 10-11, 13. Federal Communications CommissionDA 23-914 2 manufacturer’s choosing. 5 We also accept ATIS’s suggestion that at least one narrowband and one wideband codec must pass testing for distortion/noise and frequency response and tests will be limited to one bit rate and only with those air interfaces associated with the chosen codecs and that the other codecs used for conversational gain at the 2N and 8N force levels are not required to undergo the distortion/noise and frequency response tests. 6 Further, as detailed below, we accept ATIS’s suggested method to set the volume control setting for testing these other codecs for conversational gain. 7 4.By taking these steps, we ensure that when the exclusive use transition period ends on December 5, 2023, new handset models can be certified as hearing aid-compatible using the 2019 ANSI Standard as modified by the conditions established in this Order. 8 Our actions allow consumers with hearing loss who use hearing aids or cochlear implants to benefit from wider availability of handsets offering improved hearing aid compatibility under the 2019 ANSI Standard’s radio frequency (RF) interference and inductive coupling requirements. In addition, our approach gives consumers assurance that a handset’s amplifier/speaker combination will provide improved volume control functionality over narrowband and wideband modes of voice communications, and that consumers have the information that they need to make informed purchasing decisions. Our actions today will move us closer to the Commission’s goal of reaching 100% hearing aid compatibility for wireless handsets, while also creating a path forward for testing to ensure that handsets have volume control capabilities. 9 5.This waiver is effective immediately upon release of this Order so that manufacturers may afford the benefits of this relief to consumers with hearing loss as soon as feasible. In reliance upon ATIS’s representations that efforts are underway to expeditiously develop a new volume control standard through the TIA standards setting process, we limit this waiver to a two-year period. 10 During this waiver period, we will evaluate the effectiveness of the waiver standard in meeting the needs of consumers with hearing loss and take action where appropriate. We expect that a two-year time limitation for the waiver will encourage all interested parties to work together to rapidly develop an improved volume control standard that we can incorporate into our rules in the future. To ensure this outcome, we condition this waiver in part on ATIS filing a status lett…

Text truncated - open the document above for the full version.

Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Date: 06/03/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: V2X-PM95 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Point Mobile Co., LTD.. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Contact Name: Wilson Park Title: Executive Managing Director

Point Mobile Co., LTD. B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul South Korea 08512 Date: 07/18/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Request of Confidentiality FCC ID: V2X-PM95 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Point Mobile Co., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Point Mobile Co., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description 5 Tune-up procedure SHORT-TERM 6 Internal Photos 7 External Photos 8 Test-Setup Photos 9 User Manual 10 Antenna Location The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Wilson Park Title: Executive Managing Director

SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS FCC ID: V2X-PM95 The label is placed inside the battery compartment for product design reasons. The FCC ID is readily visible to the purchaser at time of purchase because the device will be marketed without the battery installed. <Label location> <Sample Label> - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

Report No.: DRRFCC2405-0030(3) FCC ID: V2X-PM95 Date of issue: Sep. 26, 2024 Copyright Ⓒ 2024, Dt&C Co., Ltd. SAR Plots Verification Plots SAR Test Plots Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.827 S/m; ε r = 38.78; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE3 Sn520 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-01; Ambient Temp: 21.3; Tissue Temp: 21.2 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.18 dB Peak SAR (extrapolated) = 11.3 W/kg SAR(1 g) = 5.34 W/kg; SAR(10 g) = 2.43 W/kg 0 dB = 6.01 W/kg Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.828 S/m; ε r = 38.76; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE3 Sn520 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-02; Ambient Temp: 21.6; Tissue Temp: 21.5 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.18 dB Peak SAR (extrapolated) = 11.5 W/kg SAR(1 g) = 5.43 W/kg; SAR(10 g) = 2.47 W/kg 0 dB = 6.09 W/kg Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.829 S/m; ε r = 38.754; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE3 Sn520 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-03; Ambient Temp: 21.4; Tissue Temp: 21.3 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.18 dB Peak SAR (extrapolated) = 11.2 W/kg SAR(1 g) = 5.33 W/kg; SAR(10 g) = 2.43 W/kg 0 dB = 6.08 W/kg Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.827 S/m; ε r = 38.784; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE4 Sn1391 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.18 dB Peak SAR (extrapolated) = 11.5 W/kg SAR(1 g) = 5.36 W/kg; SAR(10 g) = 2.44 W/kg 0 dB = 5.78 W/kg Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.827 S/m; ε r = 38.784; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: EX3DV4 - SN3930; ConvF(7.75, 7.75, 7.75); Calibrated: 7/17/2023 Electronics: DAE4 Sn1391 Sensor-Surface: 2mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.19 dB Peak SAR (extrapolated) = 12.0 W/kg SAR(1 g) = 5.53 W/kg; SAR(10 g) = 2.51 W/kg 0 dB = 7.39 W/kg Dt&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.827 S/m; ε r = 38.784; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: EX3DV4 - SN3916; ConvF(7.35, 7.13, 7.45); Calibrated: 3/18/2024 Electronics: DAE4 Sn1391 Sensor-Surface: 2mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 2 450 MHz System Verification (100 mW) Area Scan (7x10x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.14 dB Peak SAR (extrapolated) = 10.6 W/kg SAR(1 g) = 5.05 W/kg; SAR(10 g) = 2.3 W/kg 0 dB = 6.36 W/kg Dt&C Co., Ltd. DUT: Dipole 5000 MHz; Type: D5GHzV2; Serial: D5GHzV2 - SN:1212 Communication System: UID 0, CW (0); Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5200 MHz; σ = 4.536 S/m; ε r = 36.382; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: EX3DV4 - SN3933; ConvF(5.56, 5.56, 5.56); Calibrated: 10/26/2023 Electronics: DAE4 Sn1396 Sensor-Surface: 1.4mm (Mechan ical Sur…

Text truncated - open the document above for the full version.

Measurement Report for PM95, Left Touch, U-NII-5, MIMO, Channel 15 (6025.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type PM95 Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity LeftHead, HSL CHEEK, 0.00 U-NII-5WLAN 6025.0, 15 5.46 5.52 34.7 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date HBBL-600-10000, 2024-Apr-16 EX3DV4 - SN7368, 2023-11-27 DAE4 Sn1391, 2024-02-16 Twin-SAM V5.0 - 1679 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 119.0 x 204.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes Grading Ratio n/a 1.4 MAIA Y Y Surface Detection All points VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2024-04-16, 14:38 2024-04-16, 15:01 psSAR1g [W/kg] 0.068 0.080 psSAR10g [W/kg] 0.020 0.030 psAPD (1.0cm2, sq) [W/m2] 0.801 psAPD (4.0cm2, sq) [W/m2] 0.608 Power Drift [dB] 0.19 -0.12 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 56.0 Dist 3dB Peak [mm] 5.0 Warning(s) / Error(s) Details Area Scan Zoom Scan Warning(s) Error(s) A15 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, Bluetooth (0); Frequency: 2441 MHz; Duty Cycle: 1:1.302 Medium parameters used: f = 2441 MHz; σ = 1.816 S/m; ε r = 38.822; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE4 Sn1391 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 Left Touch, Bluetooth 1 Mbps Ch. 39, Ant. Internal Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.109 W/kg SAR(1 g) = 0.053 W/kg; SAR(10 g) = 0.027 W/kg 0 dB = 0.0666 W/kg A16 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, BLE (0); Frequency: 2440 MHz; Duty Cycle: 1:1.174 Medium parameters used: f = 2440 MHz; σ = 1.814 S/m; ε r = 38.827; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: Probe: EX3DV4 - SN3930; ConvF(7.75, 7.75, 7.75); Calibrated: 7/17/2023 Electronics: DAE4 Sn1391 Sensor-Surface: 2mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 Left Touch, Bluetooth LE Ch. 19, Ant. Internal, Ant.8 Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.111 W/kg SAR(1 g) = 0.055 W/kg; SAR(10 g) = 0.025 W/kg 0 dB = 0.0838 W/kg A17 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, BLE (0); Frequency: 2440 MHz; Duty Cycle: 1:1.172 Medium parameters used: f = 2440 MHz; σ = 1.814 S/m; ε r = 38.827; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: Probe: EX3DV4 - SN3916; ConvF(7.35, 7.13, 7.45); Calibrated: 3/18/2024 Electronics: DAE4 Sn1391 Sensor-Surface: 2mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-11; Ambient Temp: 21.3; Tissue Temp: 21.2 Left Touch, Bluetooth LE Ch. 19, Ant. Internal, Ant.12 Area Scan (10 x17x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.00300 W/kg SAR(1 g) = 0.00177 W/kg; SAR(10 g) = 0.00107 W/kg 0 dB = 0.00194 W/kg A18 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, WLAN (2.4G FCC) (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.811 S/m; ε r = 38.838; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE3 Sn520 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-01; Ambient Temp: 21.3; Tissue Temp: 21.2 1.5 cm space from Body, Rear, WLAN(802.11b) Ch. 6, Ant Internal, Ant.8 Area Scan (11x18x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.116 W/kg SAR(1 g) = 0.062 W/kg; SAR(10 g) = 0.033 W/kg 0 dB = 0.0705 W/kg A19 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, WLAN (2.4G FCC) (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.812 S/m; ε r = 38.816; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: ES3DV3 - SN3327; ConvF(4.96, 4.76, 4.64); Calibrated: 1/22/2024 Electronics: DAE3 Sn520 Sensor-Surface: 3mm (Mechanical Surface Detection) Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1679 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Test Date: 2024-04-02; Ambient Temp: 21.6; Tissue Temp: 21.5 1.5 cm space from Body, Rear, WLAN(802.11b) Ch. 6, Ant Internal, Ant.9 Area Scan (11x18x1): Measurement grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.130 W/kg; SAR(10 g) = 0.069 W/kg 0 dB = 0.158 W/kg A20 Dt&C Co., Ltd. DUT: PM95; Type: PDA Communication System: UID 0, WLAN (2.4G FCC) (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ …

Text truncated - open the document above for the full version.

Report No.: DRRFCC2405-0030(3) FCC ID: V2X-PM95 This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-601(03)161101 Pages: 2 /251 Test Report Version Test Report No. Date Description Tested by Reviewed by DRRFCC2405-0030 May. 30, 2024 Initial issue WonJu Ji HakMin Kim DRRFCC2405-0030(1) Jun. 7, 2024 Revised Sec.1.7 WonJu Ji HakMin Kim DRRFCC2405-0030(2) Jun. 25, 2024 Revised Sec.3.1 WonJu Ji HakMin Kim DRRFCC2405-0030(3) Sep. 26, 2024 Revised Sec.8.2 WonJu Ji HakMin Kim Report No.: DRRFCC2405-0030(3) FCC ID: V2X-PM95 This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-601(03)161101 Pages: 3 /251 Table of Contents 1. DESCRIPTION OF DEVICE ............................................................................................................................................................................................... 4 1.1 General Information.................................................................................................................................................................................................. 4 1.2 Power Reduction for SAR ........................................................................................................................................................................................ 5 1.3 Nominal and Maximum Output Power Specifications .............................................................................................................................................. 5 1.4 DUT Antenna Locations ........................................................................................................................................................................................... 5 1.5 Simultaneous Transmission Capabilities .................................................................................................................................................................. 5 1.6 Miscellaneous SAR Test Considerations ................................................................................................................................................................. 6 1.7 Guidance Applied ..................................................................................................................................................................................................... 6 1.8 Device Serial Numbers............................................................................................................................................................................................. 6 2. INTROCUCTION ................................................................................................................................................................................................................ 7 3. DOSIMETRIC ASSESSMENT ........................................................................................................................................................................................... 8 3.1 Measurement Procedure .......................................................................................................................................................................................... 8 4. DEFINITION OF REFERENCE POINTS .......................................................................................................................................................................... 10 4.1 Ear Reference Point ............................................................................................................................................................................................... 10 4.2 Handset Reference Points ..................................................................................................................................................................................... 10 5. TEST CONFIGURATION POSITIONS FOR HANDSETS ............................................................................................................................................... 11 5.1 Device Holder ............................................................................…

Text truncated - open the document above for the full version.