V4X-KF5X01Keyfob, 5 Button

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 21 of 26 Appendix G: Manual Please see the following pages. 5-Button Keyfob (KF 5 ) Installation Instructions Sequel Technologies, LLC General Description The 5-Button Keyfob (KF5) is a multifunction keychain transmitter compatible with the ST8 and ST Express security systems. The KF5 provides a convenient way to arm and disarm the system. It also includes the abil- ity to activate a panic alarm and control X10 lights and appliances (X10 PSC-04 Module required). Additional Information: User-replaceable lithium battery Six functions: disarm, arm-perimeter, arm-all, light control, panic alarm Recessed buttons to minimize inadvertent activation LED indicates signal transmission Ability to control X10 lights and appliances 4 6 1 3 * 5 2 Figure 1: KF5 Layout 1: Arm AllArms perimeter and interior burglary zones 2: LEDBlinks when a button is pressed 3: Disarm Disarms the burglary portion of the system and cancels alarms 4: Star ButtonReserved for future use 5: Arm PerimeterArms the perimeter burglary sensors 6: LightsToggles lights on/off • • • • • User Operation To arm/disarm the system using the KF5: Press the ARM PERIM button to arm the system to the Arm Perimeter level. Press the ARM ALL button to arm the system to the Arm All level. Press the DISARM button to disarm the system. Note: The system will automatically bypass open zones upon arm- ing. The system will sound a short tone from the interior sounders when the system is armed using the KF5. To activate a panic alarm using the KF5: Press and hold the ARM ALL and ARM PERIMETER buttons simultaneously for three seconds. To turn lights on/off using the KF5 (requires X10 PSC-04 Module): Press the LIGHTS button. Programming The following instructions provide a guideline for enrolling the KF5 into system memory. Enrolling the Keyfob Enter program mode (NEXT + NEXT + NEXT + <Prog> + Installer PIN) The LCD keypad will display “Devices Available.” Select <Learn>. The display shows “Auto Enroll On.” To enroll the KF5, press ARM ALL and DISARM simultaneously for three seconds. Upon enrollment, the LCD keypad emits one beep and the display shows the zone number and sensor ID. Press <Done> on the LCD keypad to exit the programming menu. Note: The KF5 is viewed by the system as a bus device. A maximum combination of 15 bus devices (LCD keypad, HWX, EIM, KF5) may be enrolled into the system. Configuring the Lights Button Device 16 is the default X10 unit controlled by the lights button. To change this setting see option “X-10 Output” in the “ST - InOu” programming menu. • • • • • 1. 2. 3. 4. 5. 1 ProblemAction The LED does not blink when a button is pressed on the KF5. Replace the sensor’s battery. Test the sensor after replacing the battery. Testing the device allows the control panel to receive a signal with the new battery information. • Specifications Compatibility: Sequel Technologies ST8 and ST Express Security Systems Power: 3.0V CR2032, lithium battery (average battery life is 3-5 years) Transmitting Frequency: 319.5 MHz and 345 MHz Transmit Range: 500 feet, open air Material: High-Impact ABS Operating Temperature: 40°F to 100°F (0° to 38°C) Storage Temperature: -30°F to 120°F (-34° to 49°C) Max. Humidity: 90% relative humidity, non condensing Regulatory Approvals: FCC 15, UL (Pending) FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes and/or modifications not approved by Sequel Technologies, LLC could void the user’s authority to operate the equipment. FCC ID: V4X-KF5X01 • • • • • • • • • Deleting the Keyfob Enter program mode (NEXT + NEXT + NEXT + <Prog> + Installer PIN). The keypad will display “Devices Available.” Press the appropriate function key to select ST (control panel). Press NEXT until the display shows <Modl>. Select <Modl> and press NEXT until the display shows “Delete Device.” Press # to scroll to the appropriate device to delete. I.e. If you wish to delete device 5 press # until the display shows “Delete Device #5.” Enter 1 followed by # or NEXT. Press EXIT to exit the programming menus and save the changes. Note: If the KF5 device # is not known, the complete list of bus devices is viewable at option “Bus Device Type” in the “ST - Modl” programming menu. All keyfobs are identified as bus device type 128. Maintenance Low Battery Indication A low battery is indicated when the LED fails to blink when a button is pressed. Replacing the Battery Remove the screw from the back of the Keyfob and remove the cover. Remove the old battery and dispose safely. Insert the new battery (observe polarity + and – ). Replace the cover and tighten screw. Cleaning Clean the KF5 with a cloth moistened with water and a mild detergent. Do not submerge in water. Troubleshooting ProblemAction The panel does not respond to key presses. Verify that the EXT is enrolled. This can be done by checking option “EXT Module” (60401) in the “ST - Modules” menu in programming. If this option is 0, the EXT is not recognized by the system. Remove the EXT and see if a trouble occurs. If not, replace the EXT. Bring the KF5 closer to the EXT and test again. If signals are properly received, the issue may be related to environmental noise or interference. If the LED does not blink when a button is pressed, replace the battery. Distance from the receiver and installation environment will affect the sensor signal strength. Reposition the EXT if necessary. • • • • 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 4. Sequel Technologies 2958 Cleveland Ave. N Roseville, MN 55113 USA Copyright © 2008 Sequel Technologies, LLC. 2

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 15 of 26 Appendix A: FCC/TCB Agency Authorization Letter Please refer to the following page. Sequel Technologies, LLC 8014 Olson Memorial Highway, Box 401 Golden Valley, MN 55427 (651) 342-0390 --- www.sequeltechnologies.com 5 March 2008 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Sequel Technologies, LLC authorizes Rhein Tech Laboratories, Inc. to act on our behalf, until otherwise notified, for applications submitted to the Federal Communications Commission and/or American Telecommunications Certification Body, Inc. We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party to the application, as defined in 47 CFR 1.2002(b), is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Sincerely, Ted Nesse VP, Technology

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 16 of 26 Appendix B: FCC Confidentiality Request Letter Please refer to the following page. Sequel Technologies, LLC 8014 Olson Memorial Highway, Box 401 Golden Valley, MN 55427 (651) 342-0390 --- www.sequeltechnologies.com 5 March 2008 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: The following information is to be held confidential pursuant of 47 CFR Part 0 §0.459 and Section 552(b)(4) of the Freedom of Information Act, because the information provided contains trade secrets and is proprietary. If made public, the information might be used to our disadvantage as in the market place. • Schematics • Technical Product Description • Block Diagram Sincerely, Ted Nesse VP, Technology

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 23 of 26 Appendix I: External Photographs Photograph 3: EUT Front Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 24 of 26 Photograph 4: EUT Back

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 17 of 26 Appendix C: ID Label and Label Location Photograph 1: ID Label Sample and Location on EUT Back

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 25 of 26 Appendix J: Internal Photographs Photograph 5: Inside Case and Top of PCB Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 26 of 26 Photograph 6: Outside Case and Bottom of PCB

Engineering and Testing for EMC and Safety Compliance Accredited under A2LA Testing Certificate # 2653.01 360 Herndon Parkway, Suite 1400 Herndon, VA 20170 Tel: 703-689-0368 Fax: 703-689-2056 FCC Part 15.231 Certification Application Report Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689-0368 360 Herndon Parkway Fax: 703-689-2056 Suite 1400 Web: www.rheintech.com Herndon, VA 20170 Email: [email protected] Applicant: Sequel Technologies, LLC Phone: 651-342-0390 8014 Olson Memorial Highway Suite 401 Golden Valley, MN 55427 Contact: Ted Nesse FCC ID V4X-KF5X01 Test Report Date March 19, 2008 Platform N/A RTL Work Order Number 2008037 Model# STWS-KF5 RTL Quote Number QRTL08-147 FCC Classification DSC – Part 15 Security/Remote Control Transmitter FCC Rule Part(s) Part 15.231: Periodic operation in the band 40.66 – 40.70 MHz and above 70 MHz (10-01-07) Digital Interface Information Digital Interface was found to be compliant Receiver Information Receiver was found to be compliant Frequency Range (MHz) Output Power (W) Frequency Tolerance Emission Designator 319.5 and 345.0 N/A N/A N/A I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. Modifications made to the equipment during testing in order to achieve compliance with these standards are listed in the report. Furthermore, there was no deviation from, additions to, or exclusions from the applicable parts of FCC Part 2, FCC Part 15 and ANSI C63.4. Signature: Date: March 19, 2008 Typed/Printed Name: Desmond A. Fraser Position: President This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and Sequel Technologies. The test results reported relate only to the item tested. This report may not be used to claim product endorsement by A2LA. Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 2 of 26 Table of Contents 1 General Information............................................................................................................................................4 1.1 Scope...........................................................................................................................................................4 1.2 Modifications.................................................................................................................................................4 1.3 Test Facility..................................................................................................................................................4 1.4 Related Submittal(s)/Grant(s).......................................................................................................................4 2 Test Information..................................................................................................................................................5 2.1 Test Justification...........................................................................................................................................5 2.2 Exercising the EUT.......................................................................................................................................5 2.3 Test Result Summary...................................................................................................................................5 2.4 Test System Details......................................................................................................................................5 2.5 Configuration of Tested System...................................................................................................................6 3 Conducted Limits – FCC §15.207.......................................................................................................................6 4 Duty Cycle Calculation - FCC §15.35(c).............................................................................................................6 5 Transmitter Deactivation – FCC §15.231(a)(1)..................................................................................................8 6 Modulated Bandwidth – FCC §15.231(c)...........................................................................................................8 6.1 Modulated Bandwidth Test Procedure..........................................................................................................8 6.2 FCC §15.231(c) Limits..................................................................................................................................8 6.3 Modulated Bandwidth Test Data...................................................................................................................9 7 Radiated Emissions – FCC §15.209, §15.231..................................................................................................11 7.1 Radiated Fundamental Emissions Test Procedure.....................................................................................11 7.1.1 Radiated Fundamental Emissions Limits Test Data....................................................................................................11 7.2 Radiated Harmonics/Spurious Emissions – FCC §15.231..........................................................................11 7.2.1 Radiated Emissions Harmonics/Spurious Test Procedure..........................................................................................11 7.2.2 Radiated Harmonics/Spurious Emissions Test Data...................................................................................................12 8 Conclusion.........................................................................................................................................................14 Rhein T…

Text truncated - open the document above for the full version.

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC 360 Herndon Parkway Model: STWS-KF5 Suite 1400 Standard: FCC 15.231 FCC ID: V4X-KF5X01 Herndon, VA 20170 http://www.rheintech.com Report #: 2008037 Page 22 of 26 Appendix H: Test Photograph Photograph 2: Radiated Emissions - Front View