V5PA80MBWBLOUS STREAMING DAC AMPLIFIER

PAX Technology Limited

Click to zoom

Application Details

Equipment Class: DXX - Part 15 Low Power Communication Device Transmitter
Date of Grant: Aug 04, 2020
Application Purpose: Original Equipment
Date of Application: Aug 04, 2020
Equipment Note: BLOUS STREAMING DAC AMPLIFIER
Frequency Range: 13.56000000 - 13.56000000
Company: PAX Technology Limited
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

EFT-POS Terminal Instruction Manual （A80） 1. Installation POWER port connects to the external power adapter. PINPAD port connects to PINPAD. RS232 port connects to serial port. LAN port connects to the network cable (optional). PHONE port connects to telephone (optional). SAM / SIM card: Remove the cover at the bottom of the terminal. Insert the SAM/SIM card to the corresponding card slot. 2. Instructions 1）Power ON/OFF Power on：Press the ON/OFF button two seconds until LCD backlight light, the terminal turns on successfully. Power off：Press the ON/OFF button two seconds until LCD no display, the terminal turns off successfully. 2）Magnetic Stripe Card Put magnetic stripe side of magnetic card towards device interior, swipe the card with a steady speed during through magnetic reader slot. (Support bi-directional swiping) 3）IC Card Put IC card chip side upward, push-in IC card slot and to bottom. 4）Shred paper operating Instructions Make paper 45 degrees angle right to paper knife and shred paper. 5）Tap contactless card (optional). Put the contactless card into the sensing area above the LCD 3. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot . when you found some suspicious objects , must report to related administrator. 4. Password Entering Tips It is highly recommended to enter password as following ways: 1）Set up peep shields. Enter password with shield by the structures of cashier desk; 2）Place the POS terminal at an appropriate angle and make sure it is difficult to peer the password. For example, the POS was installed above the movable bracket. 3）In enter password perspective, avoid surrounding video surveillance; 4）Paste text instructions to remind the customers to shelter with body or palm when enter password. 5）Merchants can also choose other ways to protect the customer input password. PAX TECHNOLOGY LIMITED To know more product details, please visit http://www.pax.com.cn P/N：200312000000198 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless Countertop Payment Terminal is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile Countertop Payment Terminals employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the Countertop Payment Terminal transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the Countertop Payment Terminal while operating can be well below the maximum value. This is because the Countertop Payment Terminal is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a Countertop Payment Terminal model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model Countertop Payment Terminal when tested for use on the body, as described in this user guide, is 0.23W/Kg(Body-worn measurements differ among Countertop Payment Terminal models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various Countertop Payment Terminals and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model Countertop Payment Terminal…

Text truncated - open the document above for the full version.

Cover Letter(s)

PAX Technology Limited Agent Authorization Company: PAX Technology Limited Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Product Name: Countertop Payment Terminal Model Number(s): A80 Product Description: Countertop Payment Terminal We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-07-29 Name: Xudong An Title: Product Manager Company: PAX Technology Limited

Cover Letter(s)

PAX Technology Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-07-07 Subject; Request for Confidentiality FCC ID: V5PA80MBW To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xudong An Title: Product Manager

External Photos

ID Label/Location Info

Label Location

Internal Photos

Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 68 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 69 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 70 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 71 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 72 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 73 of 74 Report No: CCISE200501201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 74 of 74 ------End of report------

Test Report

Shenzhen ZhongjianNanfang Testing Co., Ltd. Report No: CCISE200501204V02 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: PAX Technology Limited Address of Applicant: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Equipment Under Test (EUT) Product Name: Countertop Payment Terminal Model No.: A80 Trade mark: PAX FCC ID: V5PA80MBW Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.225 Date of sample receipt: 08 May, 2020 Date of Test: 09 May, to 28 Jul., 2020 Date of report issue: 05 Aug., 2020 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200501204V02 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 25 2 Version Version No. Date Description 00 29 Jul., 2020 Original 01 04 Aug., 2020 Delete antenna photo，Delete C63.4 for page 4 02 05 Aug., 2020 Update the spurious emission for Chapter 6.2 Tested by: Date: 05 Aug., 2020 Test Engineer Reviewed by: Date: 05 Aug., 2020 Project Engineer Report No: CCISE200501204V02 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 25 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODE AND TEST SAMPLES PLANS ................................................................................................................ 5 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 5.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 5 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD....................................................................... 6 5.7 LABORATORY FACILITY .......................................................................................................................................... 6 5.8 LABORATORY LOCATION ....................................................................................................................................... 6 5.9 TEST INSTRUMENTSLIST ........................................................................................................................................ 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 ANTENNA REQUIREMENT ....................................................................................................................................... 8 6.2 RADIATED EMISSION ............................................................................................................................................. 9 6.3 20DB BANDWIDTH ............................................................................................................................................... 16 6.4 FREQUENCY TOLERANCE .................................................................................................................................... 18 6.5 CONDUCTED EMISSION ....................................................................................................................................... 20 7 TEST SETUP PHOTOS...................................................................................................................................... 23 8 EUT CONSTRUCTIONAL DETAILS ...........................................…

Text truncated - open the document above for the full version.

Test Setup Photos

Report No: CCISE200501204 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 25 7 Test Setup Photos Radiated Emission 9kHz-30MHz 30MHz-1000MHz Report No: CCISE200501204 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2005012 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 25 Conducted Emission