V5PA920MAXSmart Mobile Payment Terminal

1 Quick Setup Guide A920MAX Smart Mobile Payment Terminal PAX Technology Limited 2 1. Checklist Congratulations on receiving your PAX Technology payment terminal. We do hope you enjoy it! The box you have just opened should contain the following items: 1 x PAX A920MAX Smart Mobile Payment Terminal 1 x Thermal Paper Roll 1 x AC Power Adapter 1 x Battery 1 x Cable 2. Product Description Contactless Card Reader，Scan Button，Volume+，Volume-，Magstripe Card Reader， Power Button， LCD Display，Smart Card Reader 3. Installation Please use the original accessories including the USB cable, power adapter and battery. 3 Scanner，SAM 1 Card Slot，SIM 2/SAM 2 Card Slot，SIM 1 Card Slot，microSD Card Slot USB Port: connect to a USB-enabled device. SAM/SIM/microSD Cards: a)Open the battery cover underneath the terminal; b)Remove the battery; c) Insert SAM/SIM/microSD cards into the corresponding card slots. 4.Instructions Power On/Off：Power On: press and hold the Power button for 5 seconds until the LCD lights on, showing that the terminal is being turned on. Power Off: press and hold the Power button for 3 seconds until the shutdown menu appears, tap Power Off > Click Power Off, and “Shutting Down” will appear. Contactless Transactions：Tap a contactless enabled card or smartphone in proximity to the top end of the terminal where the contactless sensor is located, indicated by the contactless icon. Chip Card Transactions：With the card's chip facing upwards, insert the chip card fully into the chip card slot. Magnetic Stripe Transactions：With the card's magnetic stripe facing downwards, swipe the card through the magnetic reader at a constant speed, in either direction. Paper Receipts：Tear off the receipt at a 45-degree angle to the paper cutter. Battery Charging：With a charging cable connected, the device's charging status shows on the display. 5. General Usage Tips 4 Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust. Only qualified personnel should repair this product. Before using cards in the chip & magstripe readers, please ensure they are free from any foreign objects. 6. Important Safety Warning Do not place the terminal or battery in direct sunlight, nor in environments with excessively high temperatures, smoke, dust, or dampness. Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to drop the battery. Excessive external shocks or pressure could cause battery liquid leakage or result in the battery catching fire or even exploding. Keep the battery well away from children and animals. Immediately replace any battery which appears to be deformed, expanded or in an overheated state. We recommend you only use power adaptors supplied by PAX Technology. If you must use 3 rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty. Charge the battery when the indicator level is low, but make sure to never charge a battery continuously for more than 24 hours. If a battery is not used for a long time, please charge it at least once every 6 months to avoid overcharge or discharge damage. For long-term optimal product performance, it is recommended that a battery be replaced after 2 years of continual usage. When disposing of the device, battery, or accessories, please do so responsibly and according to local regulations. These are not household waste items. Improper disposal of the battery could cause a fire or explosion, and any liquid leakage could be damaging to the environment and toxic to humans & animals. 7. Environmental Parameters Working Environment: Temperature: 0°C～45°C (32°F～113°F) Storage Environment: Temperature: -20°C~70°C(-4°F~158°F) (non-charging) Humidity:5%~95% (non-condensing) 8. Icons Dispose in a professional recycling manner Class II equipment 5 For indoor use only Energy efficiency marking AC voltage DC voltage microSD logo Trademark notice: microSD logo is a trademark of SD-3C LLC. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and …

Text truncated - open the document above for the full version.

PAX Technology Limited Date: 2022-12-7 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: V5PA920MAX T o whom it may concern: We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Winkey Wang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Wh ere our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with PAX Technology Limited T his authorization is valid until further written notice from the applicant. Print Name: Jenna Tan Title: Certification Leader Signature: On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: [email protected]

PAX Technology Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: V5PA920MAX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune up procedure Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Jenna Tan Title: Certification Leader Signature: On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name PAX Technology Limited Address Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong Grantee Code V5P FCC ID V5PA920MAX Authorized Contact Name Jenna Tan Contact Email [email protected] Contact Phone 86-755-86156663 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2022/12/7 Print Name: Jenna Tan Title: Certification Leader *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 1 of 7 Appendix External Photos for FYCR2211000462AT FCC ID: V5PA920MAX Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 7 of 7

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for FYCR2211000462AT FCC ID: V5PA920MAX Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) 3G4G Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 4 of 7 NFC Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 5 of 7 BT/WiFi/GPS Antenna LTE div Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Page: 1 of 28 Appendix C for KSCR221100225901 Calibration Certificate Object Apply No Model SN Calibration Date Dipole 1 CLA150 4025 2021/04/26 2 D450V3 1103 2021/04/21 3 D750V3 1188 2022/03/29 4 D835V2 4d114 2022/03/31 5 D900V2 1d079 2022/06/07 6 D1800V2 2d170 2022/03/31 7 D1900V2 5d136 2022/06/07 8 D2000V2 1041 2022/06/06 9 D2300V2 1096 2022/03/31 10 D2450V2 817 2022/04/01 11 D2600V2 1158 2022/03/31 12 D5GHzV2 1095 2022/06/01 DAE 13 DAE4 1245 2022/05/30 Probe 14 EX3DV4 7346 2022/03/30 Compliance Certification Services (Kunshan) Inc. Page: 2 of 28 1 Dip ole 1.1 CLA150 - SN 4025 Compliance Certification Services (Kunshan) Inc. Page: 3 of 28 1.2 D450V3 - SN 1103 Compliance Certification Services (Kunshan) Inc. Page: 4 of 28 Compliance Certification Services (Kunshan) Inc. Page: 5 of 28 1.3 D750V3 - SN 1188 Compliance Certification Services (Kunshan) Inc. Page: 6 of 28 1.4 D835V2 - SN 4d114 Compliance Certification Services (Kunshan) Inc. Page: 7 of 28 Compliance Certification Services (Kunshan) Inc. Page: 8 of 28 1.5 D900V2 - SN 1d079 Compliance Certification Services (Kunshan) Inc. Page: 9 of 28 1.6 D1800V2 - SN 2d170 Compliance Certification Services (Kunshan) Inc. Page: 10 of 28 Compliance Certification Services (Kunshan) Inc. Page: 11 of 28 1.7 D1900V2 - SN 5d136 Compliance Certification Services (Kunshan) Inc. Page: 12 of 28 1.8 D2000V2 - SN 1041 Compliance Certification Services (Kunshan) Inc. Page: 13 of 28 Compliance Certification Services (Kunshan) Inc. Page: 14 of 28 1.9 D2300V2 - SN 1096 Compliance Certification Services (Kunshan) Inc. Page: 15 of 28 1.10 D2450V2 - SN 817 Compliance Certification Services (Kunshan) Inc. Page: 16 of 28

Compliance Certification Services (Kunshan) Inc. Page: 17 of 28 1.11 D2600V2 - SN 1158 Compliance Certification Services (Kunshan) Inc. Page: 18 of 28 1.12 D5GHzV2 - SN 1095 Compliance Certification Services (Kunshan) Inc. Page: 19 of 28 Compliance Certification Services (Kunshan) Inc. Page: 20 of 28 Compliance Certification Services (Kunshan) Inc. Page: 21 of 28 2 DAE4 - SN 1245 Compliance Certification Services (Kunshan) Inc. Page: 22 of 28 3 EX3DV4 - SN 7346 Compliance Certification Services (Kunshan) Inc. Page: 23 of 28 Compliance Certification Services (Kunshan) Inc. Page: 24 of 28 Compliance Certification Services (Kunshan) Inc. Page: 25 of 28 Compliance Certification Services (Kunshan) Inc. Page: 26 of 28 Compliance Certification Services (Kunshan) Inc. Page: 27 of 28 Compliance Certification Services (Kunshan) Inc. Page: 28 of 28 4 Impeda nce and re tur n loss Dipole CLA150 SN 4025 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/26 -31.4 / 47.8 / Dipole D450V3 SN 1103 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/21 -23 / 57.1 /

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221100226001 Page: 1 of 101 Eric Lin EMC Laboratory Manager FCC SAR TEST REPORT Application No.: KSCR2211002260AT(FYCR2211000462AT) Applicant: PAX Technology Limited Address of Applicant: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd. Address of Manufacturer: 401 and 402,Building 3, Shenzhen Software Park, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Product Name: Smart Mobile Payment Terminal Model No.(EUT): A920MAX Trade Mark: PAX FCC ID: V5PA920MAX Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2022-12-05 Date of Test: 2022-12-06 to 2022-12-11 Date of Issue: 2022-12-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221100226001 Page: 2 of 101 REVISION HISTORY Revision Record Version Description Date Remark 00 Original 2022-12-20 / Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221100226001 Page: 3 of 101 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Extremity WCDMA Band II 2.22 WCDMA Band IV 2.37 WCDMA Band V 0.35 LTE Band 2 2.25 LTE Band 4 2.12 LTE Band 5 0.41 LTE Band 12 0.43 LTE Band 13 0.75 LTE Band 17 0.53 WI-FI (2.4GHz) 0.03 BT 0.16 WI-FI (5GHz) 1.87 Sum SAR 2.59 SAR Limited(W/kg) 4.0 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221100226001 Page: 4 of 101 CONTENTS 1 GENERAL INFORMATION......................................................................................................................... 6 1.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 6 1.1.1 DUT Antenna Locations .................................................................................................................. 8 1.2 TEST SPECIFICATION............................................................................................................................. 9 1.3 RF EXPOSURE LIMITS ...........................................................................................................................10 1.4 TEST LOCATION ...................................................................................................................................11 1.5 TEST FACILITY .....................................................................................................................................11 2 LABORATORY ENVIRONMENT ...............................................................................................................12 3 SAR MEASUREMENTS SYSTEM CONFIGURATION ...............................................................................13 3.1 THE SAR MEASUREMENT SYSTEM ........................................................................................................13 3.2 ISOTROPIC E-FIELD PROBE EX3DV4 .....................................................................................................14 3.3 DATA ACQUISITION ELECTRONICS (DAE) ...............................................................................................16 3.4 SAM TWIN PHANTOM ...........................................................................................................................16 3.5 ELI PHANTOM .....................................................................................................................................17 3.6 DEVICE HOLDER FOR TRANSMITTERS.....................................................................................................18 3.7 MEASUREMENT PROCEDURE .................................................................................................................19 3.7.1 Scanning procedure ......................................................................................................................19 3.7.2 Data Storage .................................................................................................................................21 3.7.3 Data Evaluation by SEMCAD ........................................................................................................21 4 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY .....................................................................23 4.1 SAR MEASUREMENT VARIABILITY...........................................................................................................23 4.2 SAR MEASUREMENT UNCERTAINTY ........................................................................................................24 5 DESCRIPTION OF TEST POSITION .........................................................................................................25 5.1 EXTREMITY EXPOSURE CONDITIONS .......................................................................................................25 6 SAR SYSTEM VERIFICATION PROCEDURE ...........................................................................................26 6.1 TISSUE SIMULATE LIQUID ......................................................................................................................26 6.1.1 Recipes for Tissue Simulate Liquid ................................................................................................26 6.1.2 Test Liquids Confirmation ..............................................................................................................27 6.1.3 Measurement for Tissue Simulate Liquid .......................................................................................28 6.2 SAR SYSTEM CHECK ...........................................................................................................................28 6.2.1 Justification for Extended SAR Dipole Calibrations ........................................................................30 6.2.2 Summary Sy…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR221100046208 Page: 1 of 28 Winkey Wang EMC Technical Manager TEST REPORT Application No.: FYCR2211000462AT Applicant: PAX Technology Limited Address of Applicant: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd. Address of Manufacturer: 401 and 402, Building 3, Shenzhen Software Park, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Equipment Under Test (EUT): EUT Name: Smart Mobile Payment Terminal Model No.: A920MAX Trade Mark: PAX FCC ID: V5PA920MAX Standard(s) : 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C Date of Receipt: 2022-11-15 Date of Test: 2022-11-21 to 2022-12-23 Date of Issue: 2022-12-26 Test Result: Pass * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR221100046208 Page: 2 of 28 Revision Record Version Chapter Date Modifier Remark 01 2022-12-26 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR221100046208 Page: 3 of 28 2 Test Summary Test Item FCC Rule No. Requirements Verdict Effective (Isotropic) Radiated Output Power Data §2.1046 §22.913 §24.232 §27.50(b) §27.50(c) §27.50(d) ERP≤ 7W(LTE Band 5) EIRP≤ 2W(LTE Band 2) ERP≤ 3W(LTE Band 13) ERP≤ 3W(LTE Band 12,17) EIRP≤ 1W(LTE Band 4 PASS Peak-Average Ratio §22.913 §24.232 §27.50(d) ≤13dB PASS Modulation Characteristics §2.1047 Digital modulation PASS Bandwidth §2.1049(h) OBW: No limit EBW: No limit PASS Band Edge Compliance §2.1051 §22.917 §24.238 §27.50(c) §27.50(g) §27.50(h) ≤ -13dBm (LTE Band5) ≤ -13dBm (LTE Band2) Refer to clause 6.4 for LTE Band13 ≤ -13dBm (LTE Band12,17) ≤ -13dBm (LTE Band4 PASS Spurious emissions at antenna terminals §2.1051 §22.917 §24.238 §27.50(c) §27.50(g) §27.50(h) ≤ -13dBm (LTE Band5) ≤ -13dBm (LTE Band2) Refer to clause 6.5 for LTE Band13 ≤ -13dBm (LTE Band12,17) ≤ -13dBm (LTE Band4 PASS Field strength of spurious radiation §2.1051 §22.917 §24.238 §27.50(c) §27.50(g) §27.50(h) ≤ -13dBm (LTE Band5) ≤ -13dBm (LTE Band2) Refer to clause 6.6 for LTE Band13 ≤ -13dBm (LTE Band12,17) ≤ -13dBm (LTE Band4 PASS Frequency stability §2.1055 §22.355 §24.235 §27.54 ≤ ±2.5ppm. PASS Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR221100046208 Page: 4 of 28 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 TEST FREQUENCY ................................................................................................................................ 6 4.3 TEST ENVIRONMENT ............................................................................................................................. 8 4.4 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 8 4.5 MEASUREMENT UNCERTAINTY .............................................................................................................. 8 4.6 TEST LOCATION .................................................................................................................................... 9 4.7 TEST FACILITY ...................................................................................................................................... 9 4.8 DEVIATION FROM STANDARDS ............................................................................................................... 9 4.9 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 9 5 EQUIPMENT LIST .................................................................................................................................... 10 6 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 12 6.1 EFFECTIVE (ISOTROPIC) RADIATED OUTPUT POWER DATA ................................................................... 12 6.1.1 E.U.T. Operation .......................................................................................................................... 12 6.1.2 Test Setup Diagram ..................................................................................................................... 12 6.1.3 Measurement Data ...................................................................................................................... 12 6.2 PEAK-AVERAGE RATIO ....................................................................................................................... 13 6.2.1 E.U.T. Operation .......................................................................................................................... 13 6.2.2 Test Setup Diagram ..................................................................................................................... 13 6.2.3 Measurement Data ...................................................................................................................... 13 6.3 BANDWIDTH ..........................................…

Text truncated - open the document above for the full version.

LTE antenna test data： 频率(MHz) EE Gain710M 70017% -7.8 -3.1 71018% -7.4 -2.5 72017% -7.6 -2.3 73017% -7.6 -2.3 74017% -7.6 -2.3 75018% -7.5 -2.1 76018% -7.4 -2.2 77019% -7.3 -2.1 78019% -7.2 -2.3780M 79019% -7.2 -2.2 80020% -7.0 -2.1 81019% -7.2 -2.4 82019% -7.2 -2.7 83019% -7.2 -2.8 84019% -7.2 -2.9 85019% -7.1 -3.2 86020% -7.0 -3.2 87021% -6.8 -3.3 项目名称PN 天线厂家 Manufacture PAX-A920MAX-LTE Antenna Datasheet A920MAX 报告版本及日期 Issue date: 测试设备Test Instrument 2022/11/18 Satimo Chamber+8960/CMW500 型号M/N:A920MAX-4G-MAIN-NA-V01-RD 88021% -6.8 -3.5 89022% -6.6 -3.3 90022% -6.5 -2.9 91022% -6.6 -2.9 92021% -6.7 -2.9840M 93020% -6.9 -2.9 94019% -7.2 -3.0 95017% -7.6 -3.3 96016% -7.9 -3.7 170034% -4.6 -1.9 172036% -4.4 -1.9 174035% -4.5 -2.0 176034% -4.7 -2.0 178032% -4.9 -2.31740M 180031% -5.1 -2.6 182029% -5.4 -3.0 184027% -5.7 -3.5 186026% -5.9 -3.9 188025% -6.0 -4.1 190025% -6.1 -3.9 192024% -6.2 -3.8 194024% -6.2 -3.7 196024% -6.1 -3.51860M 198025% -6.1 -3.2 200025% -6.0 -2.9 202026% -5.8 -2.4 204027% -5.7 -2.0 206027% -5.6 -1.6 208029% -5.4 -1.2 210030% -5.3 -0.8 212031% -5.1 -0.5 214031% -5.1 -0.32560M 216032% -4.9 0.0 218032% -4.9 0.0 230031% -5.0 -0.1 232031% -5.1 -0.2 234031% -5.0 -0.1 236031% -5.0 0.0 238031% -5.2 -0.2 240030% -5.2 0.0 242030% -5.2 0.1 244030% -5.2 0.1 246030% -5.2 0.3 248031% -5.1 0.3 250031% -5.1 0.3 252031% -5.1 0.4 254032% -5.0 0.6 256033% -4.9 0.7 258034% -4.7 0.8 260034% -4.6 0.9 262035% -4.5 1.…

Text truncated - open the document above for the full version.